Lenovo SE551F User Manual

FCC ID: O57SE551F
Lenovo Smart Video
Doorbell
ocument Version: 1.0
D
Setup Guide
Table of Contents
Package Contents .............................................................................................................. 1
Physical Details .................................................................................................................. 3
Installation ......................................................................................................................... 5
Overview ............................................................................................................................ 7
Power Kit Installation ..................................................................................................... 10
Always On Bracket .......................................................................................................... 11
Lenovo Smart Video Doorbell ........................................................................................ 12
Regulatory Approvals ..................................................................................................... 14
Chapter 1
1
Introduction
This chapter provides information about the feat ures, com ponent s and capabilities of Lenovo Smart Video Doorbell.

Package Contents

The following items should be included: If any of these items are damaged or missing, please contact your dealer immediately.
1. Lenovo Smart Video Doorbe ll x 1
2. Screw/Anchor x 2
3. Leveler x 1
4. Power Kit x 1, Foam tap x 1, Twist splice wire connector x 2
1
5. Always-on Bracket x 1
6. EVA Foam x 1
2

Physical Details

Lenovo Smart Video Doorbell supports both analog and digital chimes within 16-24 AC voltage range. The operating temperatures of Lenovo Smart Video Doorbell with Always­on bracket are –4°F to 104°F (–20°C to 40°C) on day mode and –4°F to 95°F (–20°C to 35°C) on night mode.
Note: The internal battery of Lenovo Smart Video Doorbell will not be charged when the temperature is < 32°F (0°C) and > 122°F (50°C) or discharge when internal temperature is < -4°F (-20°C) and >138°F (60°C).

Front Panel

Light Sensor This is the hardware sensor to detect light. Microphone The built-in microphone is useful for 2-way voice conversation. PIR Sensor This is the hardware sensor to detect motion. Doorbell Button
(LED Behavior)
Doorbell Mode: Press the button to ring the door chime. Off - Power off. Steady Green - Power is on and Lenovo Smart Video Doorbell is
online.
Slow Blinking Green (1s) – Ready to Scan QR code Fast Blinking Green (200ms) – Connecting network (2 mins
timeout) Fast Blinking Red/Amber (200ms) – Fail to connect network. (2
mins timeout) Steady Red/Amber – Fail to connect server. (2 mins timeout)
3

Rear Panel

Reset Button When pressed a nd held over 10 seconds, the LED will be solid
amber, which means Lenovo Smart Video Door be ll will be reset to default settings.
On/Off Switch Use this switch to power on/off Lenovo Smart Video Doorbell. Micro USB Connector
This connector is used for charging the internal battery in case Lenovo Smart Video Doorbe ll does not have enoug h power for setting up and connecting to the Wireless network before mounting to the Always-on bracket.
4
Loading...
+ 11 hidden pages