Power On: Press button and hold for 3 seconds, the system will start
up.
Power Off: Press button and hold for 3 seconds, the system will pop
up a dialog box as follow:
Press OK to power off the player.
2.2 Channel switch
Press ▲▼ to channel +/-.
2.3 Volume Control
Press
+/-
to increase or decrease the volume.
2.4 Program list
Press under TV/Radio playback mode to show the program list and
press ▲▼ to select the TV/Radio channel, then press OK to confirm.
2.5 Sub-menu
Press OK under TV/Radio playback mode to enter the sub-menu as follow:
Move the cursor and press OK to enter these functions, and then you can
press the Direction Key to select different option, press to return and
exit this sub-menu.
3
2.6 Deleting channels
While playing TV or radio press the button to open the channel list,
now press / and the system will show “Are you sure to delete current
channel”, select yes to delete the selected channel.
2.7 Reset
If the player suspend hanged up, please insert a sharp stick into the reset hole
and press lightly, the system will clear all setting and power off.
3 System Setup
Press to enter the system setup menu as follow:
3.1 Country Scan
Move the cursor to and press OK to start COUNTRY SCAN base on
the Country setting.
3.2 Manual Scan
Move the cursor to and press OK to start MANUAL SCAN; you can
set the start frequency, end frequency and Band width manually.
3.3 System setting
Move the cursor to and press OK to enter system setting menu, you
can set Area, Time Zone, OSD Language and LCN option.
4
3.4 Display setting
Move the cursor to and press OK to enter Display Setting menu, you
can set LCD Brightness, Contrast, Hue and Aspect Ratio option.
3.5 Factory Default
Move the cursor to and press OK to load Factory Default setting.
3.6 Version
Move the cursor to and press OK to show the Hardware and Software
version information.
4 Use of battery
Precautions
Please fully charge the battery when use the unit for the first time, at
least 8 hours charging need for first 3 time charge to extend the life of
the battery. The unit will be warmer when the unit is in use. It’s normal.
Please power off when the unit is not used for a long time. The unit will
be automatically powered off when the battery is low.
Warning
Don’t use the battery which does not match the unit. Danger of
explosion will be caused if battery is incorrectly replaced.
Replace only with batteries in the same or equivalent type.
For charging the battery, the power switch should be turned off.
Charge the battery with AC/DC adapter after switch off the unit.
Warning
The AC/DC adapter is AC adapter, the input voltage is
100V-240V, and the output voltage is 5V/2A. Danger of burning
the unit may be resulted if the AC/DC adapter does not match
the unit.
5
5 Specifications
Specifications
Digital TV tuner DVB-T module
Antenna
Panel
IO
Buttons
Battery
Dimensions 117 x 75 x 16.1 mm
Weight 165g with battery
Regulations CE, RoHS
Software Specification
Watch DVB-T
programs
Language English
Channel Scan Country scan / Manual scan
List of accessories
Instruction manual
AC / DC Adaptor
Built-in elastic antenna to receive the digital TV
programs with sound signals
3.5" TFT-LCD Display with the resolution of
320*240