Lenco MCI-200 User Manual

Attention:

- To ensure sufficient ventilation, keep the spacing shown as below:

(add line drawing)

- Do not remove the plastic cover of FM Antenna (A) at the back of the unit.

(add line drawing)

Main Unit Front Panel Description

1. CD Player.

2. ON/STANDBY button to turn on or off the unit. Press over 5 seconds. It turns

to ECO mode and also back to STANDBY mode when pressed over 5

seconds again.

3. SOURCE button to select TUNER, CD, UDISK (for USB), SD/MMC, iPOD,

and AUX source.

4. BAND/FOLDER button to select MW or FM band in radio mode or folder

selection during MP3/WMA playback.

5. ST/MONO button to select stereo or mono output for FM band.

6. PROG/PRESET button to enter program mode to select program playback,

or to memorize stations for tuner ,auto scan and preset tuner stations when

pressed over 5 secs.

7. button to select next track in CD/USB/SD-MMC/iPOD mode, when

pressed long it will change to fast forward play, or to adjust the clock during

clock/timer/alarm setting or to increase the frequency in Tuner mode.

8. button to select previous track in CD/USB/SD-MMC/iPOD mode, hwne

pressed long it will change to fast backward play ,or to adjust the clock

during clock/timer/alarm setting or to decrease the frequency in Tuner

mode.

9. RANDOM button to select random playback in CD/USB/SD-MMC/IPOD

mode ,or to select the previous preset channel in Tuner mode

10. phones.

11. SD/MMC CARD slot for SD or MMC card memory.

12. USB slot for USB memory.

13. Remote sensor to receive the remote control signal.

14. LCD display.

15. button to eject CD disc

16. MENU button to enable menu mode.

17. VOL + Button to increase the Volume

18. VOL– Button to decrease the Volume

19. button to play or pause a track in CD/USB/SD-MMC/iPOD playback or to

confirm the selection in MENU mode.

20. button to stop CD/USB/SD-MMC/iPOD playback or to return to the

previous menu page.

21. RPT button to select repeat playback or to select the next preset channel in

tuner mode

Main Unit Top Panel Description

1. iPod docking

Main Unit Back Panel Description

1. FM Antenna.

2. AM Antenna Input for connecting the AM Antenna.

3. AUX Input to connect an external audio source.

4. Speaker wire connection jacks (Left/Right) to connect the loudspeaker

boxes.

Remote Control

1. ON/STANDBY button to turn on and off the unit, Standby LED indicator will

light up in STANDBY mode. Press over 5 seconds, it turns to ECO mode or

return to STANDBY mode when pressed over 5 seconds again.

2. SOURCE button to select TUNER, CD, UDISK (for USB), SD/MMC, iPOD,

and AUX source.

3. BAND/FOLDER button to select MW or FM band in radio mode or folder

selection during MP3/WMA playback

4. INTRO button to play the first 10 seconds of each track.

5. RPT/ button to select repeat playback or to set channel number / select

preset channel in TUNER mode.

6. / ENTER button to play or pause a track during CD/USB/SD-MMC/iPOD

playback or to confirm the selection in MENU mode.

7. to select next track in CD/USB/SD-MMC/iPOD mode, or to adjust the

clock in clock/timer/alarm setting or to increase the frequency in Tuner

mode.

8. SLEEP button to enable and select time to sleep.

9. EQ button to select five EQ presets(FLAT/ROCK/JAZZ/CLASSIC/POP)

10. VOL + button to increase the Volume

11. button to eject the CD disc.

12. MENU button to enter menu mode

13. ST/MO button to select stereo or mono output for FM band.

14. PROG/PRESET button to enter program mode, or to select program

playback, or to memorize for tuner , auto scan and preset tuner channels

when it is pressed over 5 seconds

15. RAND/ button to select random playback or to set the channel number /

select a preset channel in TUNER mode,

16. / ESC button to stop CD/USB/SD-MMC/iPOD playback or to return to the

previous menu page.

17. to select the previous track in CD/USB/SD-MMC/iPOD mode, or to

adjust the clock during clock/timer/alarm setting or to decrease the

frequency in Tuner mode.

18. MUTE button to mute the sound.

19. BASS button to turn on or off the super bass effect.

20. VOL – button to decrease the Volume

Accessories

AM Loop Antenna

FM Antenna

Speaker Cable x 2

iPod plastic tray x 8

User Operations

To turn on the unit

After connecting the speaker cables and the power supply, the main unit

ON/STANDBY button LED lights up. Press the ON/STANDBY button to turn on

the unit and press it again to go to Standby mode. when pressed over 5

seconds, it will turn to ECO standby mode, it can turn back to Standby mode,

when pressed over 5 seconds again.

Menu Setting

1. Press the MENU button to enter menu setting mode.

2. Menu setting mode will allow the user to adjust the following settings:

CLOCK – adjust the real time clock

TIMER – set timer on and off time

ALARM – set the alarm time, select the alarm source, cycle mode or off

EQ – set EQ mode (FLAT/ROCK/JAZZ/CLASSIC/POP)

BASS – set BASS on and off

3. Press the MENU button repeatedly until the desired setting shows up.

4. Press the / ENTER button to select the setting

5. Press the / ESC button to quit or it will quit automatically if no button is