Lenco MC-150 User manual

0 (0)

Model MC-150

User manual - Hi-Fi set with DAB+/FM radio, CD MP3, Bluetooth and USB player

Gebruikshandleiding – HiFi-set met DAB+/FM-radio, CD MP3, Bluetooth en USB-speler Bedienungsanleitung - Hi-Fi-Anlage mit DAB+/FM-Radio, CD-/MP3-, Bluetooth und USBPlayer

Mode d’emploi - Chaîne Hi-Fi avec radio DAB+/FM, CD MP3, Bluetooth et port USB Manual de usuario – Equipo Hi-Fi con radio DAB+/FM, CD MP3, Bluetooth y reproductor USB

Index
English ........................................................................................................................................................................................................	3
Nederlands ...............................................................................................................................................................................................	14
Deutsch.....................................................................................................................................................................................................	26
Français.....................................................................................................................................................................................................	38
Español .....................................................................................................................................................................................................	50

English	MC-150

CAUTION:

Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

This unit should not be adjusted or repaired by anyone except qualified service personnel.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

1.Do not use this device near water.

2.Clean only with a slightly damp cloth.

3.Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free space around the whole device.

4.Install in accordance with the supplied user manual.

5.* Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point.

Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s reach! When playing with the power cable, they can seriously injure themselves.

6.* Unplug this device during lightning storms or when unused for a long period.

7.Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-generating products or naked flame.

8.Avoid using the device near strong magnetic fields.

9.Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment.

10.Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.

11.Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.

12.Do not use this device when condensation may occur.

13.Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.

14.This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.

15.* The socket outlet must be installed near the equipment and must be easily accessible.

16.* Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.

17.* Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.

18.* Devices with class 2 construction do not require a earthed connection.

19.Keep away from rodents. Rodents enjoy biting on power cords.

20.* Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a short circuit.

21.Avoid placing the device on any surfaces that may be subject to vibrations or shocks.

22.To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To remove severe stains, you may use a damp cloth with dilute detergent.

23.The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.

24.Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be corrupted or lost.

25.If the unit has USB playback function, the usb memory stick should be plugged into the unit directly. Don’t use an usb extension cable because it can cause interference resulting in failing of data.

26.The apparatus shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.

27.* To completely disconnect the power input, the mains plug of the apparatus shall be disconnected from the mains, as the disconnect device is the mains plug of apparatus.

28.If the unit works with battery, Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

29.Attention should be drawn to the environmental aspects of battery disposal.

30.The apparatus can only be used in moderate extremely cold or climates warm environments should be avoided.

31.The rating label has been marked on the bottom or back panel of the apparatus.

32.This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or a lack of experience and knowledge, unless they’re under supervision or have received instructions about the correct use of the device by the person who is responsible for their safety.

33.This product is intended for non professional use only and not for commercial or industrial use.

34.Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.

35.Never remove the casing of this apparatus.

36.Never place this apparatus on other electrical equipment.

37.Do not use or store this product in a place where it is subject to direct sunlight, heat, excessive dust or vibration.

38.Do not allow children access to plastic bags.

39.Only use attachments/accessories specified by the manufacturer.

40.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen into the apparatus, when the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

41.*Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock.

42.Prolonged exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.

INSTALLATION

•Unpack all parts and remove protective material.

•*Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.

*Those instruction are related only to products using power cable or AC power adaptor.

FRONT PANEL

1.CD DISC COMPARTMENT DOOR

2.STANDBY

Press to turn on the unit. Press again to turn off and go to Standby mode

3.DISPLAY

Display the unit operation status and information

4.– VOLUME +

Adjust the main volume

5.PLAY/PAUSE /SCAN

CD/USB/BT: Press to toggle between pause and resume playback operation. FM: Short press to scan the next available FM station.

Press and hold to start auto-scanning and store all available FM stations. DAB: Press to start auto-scanning and store all available DAB stations.

6.SOURCE

Press this key to choose di erent modes of operation: DAB/FM/CD/USB/BT/AUX IN

7.HEADPHONE OUT JACK

Connect to the external headphone

8.AUX IN

Connect to external audio player

9.STOP

Press to stop the CD/USB playback operation

10.USB INPUT

11./TUNE-

DAB: Press to display the next station information FM: Short press to tune to a different frequency Press and hold to scan the next available station CD/USB/BT: Press to search to the previous track

12./TUNE+

DAB: Press to display the next station information FM: Short press to tune to a different frequency Press and hold to scan the next available station CD/USB/BT: Press to search to the next track

13.MENU/INFO

DAB/FM: Press to display station information

Press and hold to enter the Menu for setting change

14.SELECT/MONO/ST

DAB/FM: Press to select the change setting in the menu operation

Press and hold to toggle between stereo and force mono when FM station is received

15.IR RECEPTION WINDOW

REAR PANEL

1.ANT IN

Insert the single wire antenna into this terminal. Ensure that the wire antenna polarity is correctly inserted. The wire should be extended to ensure good reception.

2.AC ~ IN POWER CORD

3.LEFT/RIGHT SPEAKER OUTPUT

Left and right speakers should insert into these terminals L and R respectively. Ensure that the wire polarity is correctly inserted.

REMOTE CONTROL

1.	STANDBY
2.	NUMERIC BUTTONS
3.	MEMORY
4.	PREVIOUS /TUNE
5.	FOLDER
6.	REPEAT
7.	FOLDER
8.	INFO
	SCAN
	MENU
9.	BT PREVIOUS
	BT NEXT
	BT PLAY/PAUSE
10.	ID3 TAG DISPLAY
	CD/USB STOP
	CD/USB PLAY/PAUSE
11.	VOLUME +
	VOLUME –
12.	MUTE
13.	RANDOM
14.	CH-
15.	NEXT /TUNE
16.	ENTER
17.	MONO/ST
18.	CH+
19.	SLEEP
20.	X-BASS
21.	EQUALIZER
22.	SOURCE

Remote Control Operation

A CR2025 battery is already installed in the remote control unit. Before using, pull out the battery insulation sheet as shown below.

To replace a new battery, please refer to the figure shown below. When inserting a battery, be sure to do so in the proper direction.

If the remote control conﬂicts with other devices, the operation will be a ected.

Do not simultaneously press buttons on the unit and the remote control.

Avoid using two remote controls at the same time as it will cause a malfunction.

Use only CR-2025 size batteries.

If there is battery leakage, clean the remote control thoroughly before replacing batteries

Do not short two terminals of the batteries. Dispose old batteries in a suitable place.

BASIC OPERATION

Plug the AC power cable into the AC wall socket. The display will show “SCANTIME”. The unit is now updating the time from the broadcaster. Wait for a while until it is finished and the real time will be display.

Press the STANDBY button to turn on the unit. To turn off, press the STANDBY button again.

DAB/FM/CD/USB/BT/AUX IN

Press the SOURCE button to select from different sources.

Volume Control

Turn the VOLUME control or press the VOL-/VOL+ buttons on the remote control to change the volume.

Adjusting the Antenna

The wire antenna at the rear panel of the unit should be extended and altered to ensure a good DAB/FM reception.

DAB OPERATION

The first time the DAB mode is selected, it will automatically scan for available DAB stations. Wait until the scanning has finished. The display will show the scanning progress. After scanning it will tune to the first station. Stations are listed in numerical then alphabetic order. All stations scanned are stored. The next time the unit is turned on there will be no automatic scanning.

Auto Scan

1.Turn on the unit and select DAB mode

2.Press the SCAN button to start the automatic scanning. The stations found will be automatically stored (Max 20 presets).

Manual DAB scanning

1.Turn on the unit and select DAB mode

2.Press MENU button on the remote control to access the menu control.

3.Press the PREVIOUS or NEXT button until “MANUAL” is displayed and then press the ENTER button.

4.Press the PREVIOUS or NEXT button to select the desired channel (Example: 5A-13F).

5.Press the ENTER button to confirm.

6.To select another channel (Example: 5A-13F), press the PREVIOUS or NEXT button and then press the ENTER button to confirm.

7.To quit manual scan, press the MENU button on the remote control.

Tuning

Press the TUNE or TUNE button to display the information of the next station. Then press the ENTER button to tune to this station in few seconds.

Storing DAB Presets

You can save up to 20 DAB stations.

1.Tune to the station you wish to store.

2.Press and hold the MEMORY button to access the menu control. Flashing “PROG” is displayed

3.Press the TUNE or TUNE button to a preset number that you want to store. Then press the ENTER button to save.

Stored DAB Presets

Press the CHor CH+ button directly tune to the preset channel.

Displaying DAB Station Information

There are several types of information as listed below. To change the display information, press the INFO button repeatedly.

1.Radio Text scrolling

Comprises music titles or programme details provided by the broadcaster.

2.Signal Bar

Reception signal level. The more the star mark is displayed, the stronger the signal is received. To improve the reception adjust the wire antenna position.

3.Program Type (PTY)

Type of program provided by the Radio station.

4.Multiplex Name

Displays name of multiplex to which the current station belongs.

5.Frequency

Current channel frequency.

6.Signal Error Rate

It shows the error received. The larger this value the more errors are received. To improve the reception adjust position of the wire antenna.

7.Audio Bit Rate

This is the current channel audio bit rate.

OTHER DAB MENU OPERATIONS

Press the MENU button on the remote control to access the menu control. Then press the PREVIOUS or NEXT button for different options as described below.

Dynamic Range Control (DRC)

DRC can make quieter sounds easier to hear when the unit is used in a noisy environment. The DRC level of a broadcast is set by the radio station and transmitted with the service. Changing the DRC value on your unit enables you to apply a scaling factor to this level. There are three levels of compression:

DRC high:	Maximum compression as sent with the transmitted service
DRC low:	Set to 1/2 that of the sent transmitted service
DRC off:	No compression

1.Press the MENU button on the remote control to access the menu control.

2.Press the PREVIOUS or NEXT button until “DRC” is displayed and then press the ENTER button.

3.Press the PREVIOUS or NEXT button to select the DRC value and then press the ENTER to confirm.

4.Press the MENU button on the remote control to exit the menu control.

Note:

-Not all DAB stations are able to use DRC function. If the radio station does not support DRC then the DRC setting in the unit will have no effect.

-After you have adjusted the DRC level the sound may be louder.

Prune

This function removes inactive stations.

1.Press MENU button on the remote control to access the menu control.

2.Press the PREVIOUS or NEXT button until “PRUNE” is displayed and then press the ENTER button.

3.Press the PREVIOUS or NEXT button to select “PRUNE Y” and then press the ENTER button to prune the unit.

4.Press the MENU button on the remote control to exit the menu control.

FM RADIO OPERATION

Auto Scan

1.Turn on the unit in FM mode.

2.Press and hold the SCAN button to start auto-scanning and saving the available stations (max. 20 storage).

Manual Scan

1.Press the TUNE or TUNE button repeatedly to tune to a different frequency.

2.Alternatively press and hold the TUNE or TUNE button to automatically search to the next available station.

Storing FM Presets

You can save up to 20 FM stations.

1.Tune to the station you wish to store.

2.Press and hold the MEMORY button. Flashing “PROG” is displayed.

3.Press the TUNE or TUNE button to a preset number that you want to store. Then press the ENTER button to save.

Recall FM Presets

Press the CHor CH+ button directly tune to the preset channel.

Stereo/Force Mono Selection

When receiving a stereo broadcast FM station, press the MONO/ST button will switch between stereo audio or force mono audio.

Displaying FM Station Information

There are several types of information as listed below. To change the display information press the INFO button repeatedly.

1.Radio Text

Scrolling text which displays information about music title or program details provided by the active radio station.

2.Program Type (PTY)

Type of program provided by the broadcaster.

3.Frequency

Current channel frequency.

4.Audio Type Stereo or Mono.

OTHER FM MENU OPERATION

Press the MENU button on the remote control to access the menu control. Then press the PREVIOUS or NEXT button for different options as described below.

Scan Setting

1.Press the MENU button on the remote control to access the menu control.

2.Press the PREVIOUS or NEXT button until “SCAN” is displayed and then press the ENTER button.

3.Press the PREVIOUS or NEXT button to toggle between “ALL” or “STRONG” selections and then press the ENTER button confirm. When “ALL” is selected, all stations will be detected during FM scanning even if the radio station is noisy. When the “STRONG” is selected, only the strong stations are detected. Scanning will ignore those noisy stations.

4.The next time doing a FM scan the unit will search for the stations based on this confirmed setting.

Audio Setting

1.Press the MENU button on the remote control to access the menu control.

2.Press the PREVIOUS or NEXT button until “AUDIO” is displayed and then press the ENTER button.

3.Press the PREVIOUS or NEXT button to toggle between “STEREO” or “MONO” selection and then press the ENTER button confirm.

CD/USB OPERATION

Loading and Playing CD Disc

Open the CD door. Install a disc with the CD graphic side facing up. Close the CD door. Press the SOURCE button to CD mode. After reading the total number of tracks will be shown on the display. Press the CD/USB PLAY/PAUSE button to play.

Reading and Playing USB Device

Insert a USB device into the USB input jack. Press the SOURCE button to USB mode. After reading the total number of tracks will be shown on the display. Press the CD/USB PLAY/PAUSE button to play.

Play/Pause Control

To pause playback press the CD/USB PLAY/PAUSE button. Press the button again to resume playback.

Stop Control

To stop playback press the STOP button.

Skip Track

During playback press the PREVIOUS or NEXT button to search to the previous or next track.

Random Play

During playback press the RANDOM button to play music in random order. The display will show “RANDOM”. Press the RANDOM button again to resume normal playback.

High-Speed Music Search

During playback press & hold the PREVIOUS or NEXT button to start high-speed searching.

When you release the PREVIOUS or NEXT button normal speed playback will resume.

Repeat Playing

During playback press the REPEAT button once the display shows “RPT ONE”. The current track will be played repeatedly. Press the REPEAT button again the display shows “RPT ALL”. All tracks will be played repeatedly. Press the REPEAT button again to resume normal playback.

In case of MP3 file folder playback, there is a repeat folder as well and the display will show “RPT FOLD”.

Folder Select (MP3 file only)

During MP3 playback press the FOLDER or FOLDER button to change the folder.

In stop mode press the FOLDER or FOLDER button to change the folder. Then press the PREVIOUS or NEXT button to select your desired track to play. Press the PLAY/PAUSE button to start playback the track.

ID3 Tag Display (MP3 file only in which the ID3 Tag information is included)

Press the DISPLAY button will toggle the ID3 Tag display on/off. When it is on, the MP3 track’s title, artist and album details will be displayed.

BLUETOOTH AUDIO

Please follow the pairing instructions below to link the unit to your Bluetooth device.

1.Press the SOURCE button repeatedly to enter the Bluetooth mode. The display will show “BT”. It will start searching and will display a flashing “PAIRING”.

2.If the unit has never been paired with a Bluetooth device before or cannot find the last paired device, the display and the Bluetooth status indicator will keep on flashing. Turn on the Bluetooth function of your device and enable the search until “Lenco MC-150” is found. Select “Lenco MC-150” on the Bluetooth device to make connection. Enter the pass code “0000” if required.

3.After successfully paired the unit will display “BT AUDIO”.

4.You can now start playing music from your smartphone wirelessly to the speaker.

5.You can press the BT PLAY/PAUSE button to pause or resume the playback.

6.You can press the BT PREVIOUS or BT NEXT button to search to the previous or next song.

AUX IN

This allows you to connect an external player’s sound through your unit.

1.Plug a 3.5mm audio cable (not included) into your external player’s line out and the other end into the AUX IN jack.

2.Press the SOURCE button to enter AUX mode. Display shows “AUDIO IN”

3.Start your external player to play music.

4.The unit will output the sound.

If it is in AUX mode more than 4 hours, it will automatically switch to standby mode. When it is 10 minutes before entering the standby, the display will flash. You can press PLAY button to disable the auto-off function.

EQ OPERATION

You can enjoy different EQ sound effect modes. Press the EQUALIZER button will change to different sound effects of FLAT/CLASSIC/ROCK/POP/JAZZ.

X-BASS

You can also boost the bass effect of the music. Press the X-BASS button will toggle the X-Bass effect between ON and OFF.

SLEEP FUNCTION

1.When the unit is switched on, press the SLEEP button repeatedly to select a sleep duration from either SLEEP 00 (sleep off), 90, 80, 70, 60, 50, 40, 30, 20 or 10 minutes. The sleep icon will be shown on the display.

2.When the sleep timer is zero, the unit will turn off automatically.

3.To cancel the sleep function, press the STANDBY button to turn off the unit. Or press the SLEEP button repeatedly to select “SLEEP 00”.

ENERGY SAVING

Due to ErP stage 2 requirement and protect the environment, the unit will turn off to the standby mode automatically once no music has been playing for about 15 minutes except in AUX mode. If it is in AUX mode more than 4 hours, it will automatically switch to standby mode. When it is 10 minutes before entering the standby, the display will flash. You can press PLAY button to disable the auto-off function.

To reactivate the unit, press the STANDBY button to turn on the unit.

SOFTWARE VERSION CHECK

You can check the unit software version.

1.Turn on the unit in DAB mode or FM mode.

2.Press the remote control MENU button (or press and hold the MENU/INFO button on the front panel) to access the menu control.

3.Press the PREVIOUS or NEXT button until “SYSTEM” is displayed and then press the ENTER button.

4.Press the PREVIOUS or NEXT button until “SW VER” is displayed and then press the ENTER button to show the software version number.

5.Press the remote control MENU button to exit the menu control.

LANGUAGE SETUP

You can set the unit’s language.

1.Turn on the unit in DAB mode or FM mode.

2.Press the remote control MENU button (or press and hold the MENU/INFO button on the front panel) to access the menu control.

3.Press the PREVIOUS or NEXT button until “SYSTEM” is displayed and then press the ENTER button.

4.Press the PREVIOUS or NEXT button until “LANGUAGE” is displayed and then press the ENTER button.

5.Press the PREVIOUS or NEXT button to toggle between different languages. Select your desired language and then press the ENTER button to confirm.

6.Press the remote control MENU button to exit the menu control.

FACTORY RESET

This function resets the unit to the original factory settings.

1.Turn on the unit in DAB mode or FM mode.

2.Press the remote control MENU button (or press and hold the MENU/INFO button on the front panel) to access the menu control.

3.Press the PREVIOUS or NEXT button until “SYSTEM” is displayed and then press the ENTER button.

4.Press the PREVIOUS or NEXT button until “RESET” is displayed and then press the ENTER button.

5.Press the PREVIOUS or NEXT button until “RESET Y” is displayed and then press the ENTER button to reset the unit.

ACCESSORIES

Wire antenna x 1

Remote control x 1

Instruction manual x 1

TECHNICAL SPECIFICATIONS

DAB+ radio frequency range FM radio frequency range AC power input

Power consumption Speaker output power Bluetooth

USB

Aux In Headphone out

Remote control battery

Main Unit dimension (L x D x H) Speaker box dimension (L x D x H) Total weight

174.928-239.2 MHz

87.5-108 MHz

100-240V~, 50/60Hz

22 W

2 x 10W RMS

V2.1 + EDR

USB 2.0 type A socket 3.5mm stereo socket 3.5mm stereo socket CR2025 x 1 pcs

140 x 204 x 170 mm

Each speaker box 130 x 123 x170 mm 2.6 kg

The specification presents only as a reference. The value of weight and size are approximation.

Our product is improved ceaselessly and the specification and function may be changed without prior notice.

GUARANTEE

Lenco o ers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer.

Important note: It is not possible to send products that need repairs to Lenco directly.

Important note: If this unit is opened or accessed by a non-o cial service center in any way, the warranty expires.

This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.

DISCLAIMER

Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction, speciﬁcations and pictures in this documentation may di er slightly from your particular situation. All items described in this guide for illustration purposes only and may not apply to a particular situation. No legal right or entitlements may be obtained from the description made in this manual.

DISPOSAL OF THE OLD DEVICE

This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).

SERVICE

For more information and helpdesk support, please visit www.lenco.com

Lenco Benelux BV, Thermiekstraat 1a, 6361 HB Nuth, The Netherlands.

Nederlands	MC-150

LET OP:

Gebruik van bedieningen of afstellingen of uitvoer van procedures anders dan gespecificeerd in deze documentatie kan leiden tot blootstelling aan schadelijke straling.

Dit apparaat dient uitsluitend te worden aangepast of gerepareerd door gekwalificeerd onderhoudspersoneel.

VOORZORGSMAATREGELEN VOOR GEBRUIK

ONTHOUD DE VOLGENDE INSTRUCTIES:

1.Gebruik dit apparaat niet in de buurt van water.

2.Reinig het uitsluitend met een licht vochtige doek.

3.Bedek of blokkeer de ventilatie-openingen niet. Wanneer u het apparaat op een schap plaatst, dient u 5 cm (2”) vrije ruimte rondom het gehele apparaat te behouden.

4.Installeer het product volgens de meegeleverde gebruikershandleiding.

5.* Nooit op de stroomadapter stappen of deze indrukken. Wees voornamelijk voorzichtig in de buurt van de stekkers en het punt waar de kabel uit het apparaat komt. Plaats geen zware voorwerpen op de stroomadapter, om beschadiging ervan te voorkomen. Houd het gehele apparaat buiten bereik van kinderen! Wanneer kinderen met de voedingskabel spelen, kunnen zij ernstig letsel oplopen.

6.* Haal de stekker uit het stopcontact tijdens onweer of wanneer u deze langere tijd niet gebruikt.

7.Houd het apparaat uit de buurt van hittebronnen, zoals radiatoren, verwarmingen, kachels, kaarsen en andere hittegenererende producten of naakte vlam.

8.Gebruik dit apparaat niet in de buurt van krachtige magnetische velden.

9.Elektrostatische ontlading kan normaal gebruik van dit apparaat verstoren. U hoeft het apparaat in dit geval slechts te resetten en opnieuw op te starten volgens de gebruikershandleiding. Wees voorzichtig tijdens bestandsoverdracht en doe dat in een omgeving zonder statische verstoringen.

10.Waarschuwing! Steek nooit een voorwerp via de ventilatieof andere openingen in het product. Er is hoogspanning in het product aanwezig en als u er een object insteekt, kan dat een elektrische schok veroorzaken en/of kortsluiting in de interne onderdelen. Mors om dezelfde reden geen water of vloeistof op het product.

11.Gebruik het toestel niet in vochtige ruimtes, zoals badkamers, stomende keukens of in de buurt van zwembaden.

12.Gebruik dit apparaat niet wanneer condensatie kan optreden.

13.Alhoewel dit apparaat met grote zorg gefabriceerd en verschillende keren geïnspecteerd is voordat het de fabriek verlaat, is het nog steeds mogelijk dat er problemen optreden, zoals met alle elektrische apparaten. Als u rook, een overmatige hitteontwikkeling of enig ander onverwacht verschijnsel opmerkt, moet u onmiddellijk de stekker van het netsnoer uit het stopcontact halen.

14.Dit apparaat moet aangedreven worden door een voedingsbron, zoals aangegeven op het specificatieplaatje. Als u twijfelt over het type voeding dat gebruikt wordt in uw huis, raadpleeg dan a.u.b. uw dealer of plaatselijk energiebedrijf.

15.* Het stopcontact moet in de buurt van de apparatuur zijn geïnstalleerd en eenvoudig te bereiken zijn.

16.* Overbelast stopcontacten of verlengsnoeren niet. Overbelasting kan brand of een elektrische schok veroorzaken.

17.* Apparaten met een Klasse 1 structuur dienen te worden aangesloten op een stopcontact met een beschermende aardverbinding.

18.* Apparaten met een Klasse 2 structuur vereisen geen aardverbinding.

19.Houd ze uit de buurt van knaagdieren. Knaagdieren knauwen graag aan voedingskabels.

20.* Houd altijd de stekker vast wanneer u deze uit het stopcontact trekt. Trek nooit aan de voedingskabel. Dit kan tot een kortsluiting leiden.

21.Vermijd om het toestel te plaatsen op een ondergrond die blootgesteld kan worden aan trillingen of schokken.

22.Gebruik een zacht, droog doekje om het apparaat te reinigen. Gebruik geen oplosmiddelen of op benzine gebaseerde vloeistoffen. U kunt een vochtig doekje met verdund schoonmaakmiddel gebruiken om hardnekkige vlekken te verwijderen.

23.De leverancier is niet verantwoordelijk voor schade of verloren gegevens veroorzaakt door storing, misbruik, modificatie van het apparaat of batterijvervanging.

24.Onderbreek nooit de verbinding wanneer het apparaat formatteert of bestanden overdraagt. De gegevens kunnen anders corrupt of verloren raken.

25.Indien het apparaat een USB-afspeelfunctie heeft, moet de USB-geheugenstick rechtstreeks op het apparaat worden aangesloten. Gebruik geen USB-verlengkabel, omdat die kan leiden tot storingen met foutieve gegevens als gevolg.

26.Het apparaat mag niet worden blootgesteld aan druppels of spatten en zorg ervoor dat er geen met vloeistof gevulde voorwerpen, zoals vazen, op of nabij het apparaat zijn geplaatst.

27.* Om de verbinding met de stroomaansluiting volledig te verbreken, moet de stekker van het apparaat uit het stopcontact worden gehaald, omdat de stekker van het apparaat de hoofdschakelaar is.

28.Indien het apparaat op batterijen kan werken, dan mogen de batterijen niet aan overmatige hitte, zoals zonlicht, open vuur e.d. worden blootgesteld.

29.Aandacht voor het milieu is nodig bij het verwijderen van de batterijen.

30.Het apparaat kan alleen worden gebruikt in gematigde klimaten. Extreem koude of warme omgevingen moeten worden vermeden.

31.Het nominale specificatielabel is te vinden op het paneel aan de onderof achterkant van het apparaat.

32.Dit apparaat is niet bestemd voor gebruik door mensen (inclusief kinderen) met fysieke, zintuiglijke of geestelijke gebreken of gebrek aan kennis en ervaring, tenzij zij onder toezicht staan of instructies hebben over het juiste gebruik van het apparaat hebben gekregen van de persoon die verantwoordelijk is voor hun veiligheid.

33.Dit product is alleen voor niet-professioneel gebruik bedoeld en niet voor commercieel of industrieel gebruik.

34.Verzeker u ervan dat het apparaat in een stabiele positie staat opgesteld. Schade, veroorzaakt door het gebruik van dit product in een onstabiele positie, of door het niet naleven van waarschuwingen of voorzorgsmaatregelen genoemd in deze handleiding, valt niet onder de garantie.

35.Verwijder nooit de behuizing van dit apparaat.

36.Plaats dit apparaat nooit op andere elektrische apparatuur.

37.Dit product niet gebruiken of opslaan op plaatsen waar het wordt blootgesteld aan direct zonlicht, hitte, buitensporig veel stof of trillingen.

38.Geef kinderen geen gelegenheid in aanraking met plastic zakken te komen.

39.Gebruik uitsluitend uitbreidingen/accessoires gespecificeerd door de fabrikant.

40.Laat alle reparaties over aan gekwalificeerd onderhoudspersoneel. Onderhoud is vereist als het toestel hoe dan ook is beschadigd, zoals bijvoorbeeld het netsnoer of de stekker, wanneer er vloeistof of een voorwerp in het apparaat is terechtgekomen, wanneer het apparaat is blootgesteld aan regen of vocht, als het niet normaal werkt of is gevallen.

41.* Gebruik nooit een beschadigde voedingskabel of stekker of een los stopcontact. Dit vormt namelijk een risico op brand of elektrische schokken.

42.Langdurige blootstelling aan luid geluid van persoonlijke muziekspelers kan leiden tot tijdelijke of permanente gehoorbeschadiging.

INSTALLATIE

•Pak alle onderdelen uit en verwijder de beschermende materialen.

•* Sluit het apparaat niet aan op het stopcontact, voordat u de netspanning hebt gecontroleerd en voordat alle andere aansluitingen zijn gemaakt.

*deze instructies zijn enkel van toepassing voor producten met een voedingskabel of een AC voedingsadapter.

VOORPANEEL

1.KLEP VAN CD-HOUDER

2.STAND-BY

Indrukken om het apparaat in te schakelen. Nogmaals indrukken om uit en weer op stand-by te schakelen

3.SCHERM

Toont de gebruiksmodus van het apparaat en andere informatie

4.– VOLUME +

Het hoofdvolume aanpassen

5.START/PAUZE /SCAN

CD/USB/BT: Indrukken om het afspelen te pauzeren en hervatten.

FM: Kort indrukken om naar het volgende beschikbare FM-station te zoeken.

Ingedrukt houden om een automatische scan te starten en alle beschikbare FM-stations op te slaan. DAB: Indrukken om een automatische scan te starten en alle beschikbare DAB-stations op te slaan.

6.BRON

Druk op deze toets om verschillende gebruiksmodi te selecteren: DAB/FM/CD/USB/BT/AUX-IN

7.HOOFDTELEFOONUITGANG

Sluit hier een externe hoofdtelefoon aan

8.AUX-IN

Sluit hier een externe audiospeler aan

9.STOP

Indrukken om de CD-/USB-afspeelmodus te stoppen

10.USB-INGANG

11./AFSTEMMEN-

DAB: Indrukken om de volgende stationsinformatie weer te geven FM: Kort indrukken om af te stemmen op een andere frequentie Ingedrukt houden om naar het volgende beschikbare station te zoeken CD/USB/BT: Indrukken om naar de vorige track te zoeken

12./AFSTEMMEN+

13.MENU/INFO

DAB/FM: Indrukken om stationsinformatie weer te geven

Ingedrukt houden om het menu te openen en instellingen te veranderen

14.SELECTEREN/MONO/ST

DAB/FM: Indrukken om instellingen te veranderen in het menu

Ingedrukt houden om te wisselen tussen stereo en geforceerd mono wanneer een FM-station wordt ontvangen

15.IR-ONTVANGSTVENSTER

ACHTERPANEEL

1.ANT IN

Steek de enkeldraadse antenne in deze klem. Controleer of de draadantenne in de juiste polariteitrichting is ingestoken. Trek de draad volledig uit voor een goede ontvangst.

2.AC ~ IN VOEDINGSKABEL

3.LINKER/RECHTER LUIDSPREKERUITGANG

Sluit de linker en rechter luidsprekers aan op de corresponderende klemmen L en R. Controleer of de draad in de juiste polariteitrichting is ingestoken.

AFSTANDSBEDIENING

1.	STAND-BY
2.	NUMERIEKE TOETSEN
3.	GEHEUGEN
4.	VORIGE /AFSTEMMEN
5.	FOLDER
6.	HERHAAL
7.	FOLDER
8.	INFO
	SCAN
	MENU
9.	BT VORIGE
	BT VOLGENDE
	BT START/PAUZE
10.	WEERGAVE ID3-TAG
	CD/USB STOP
	CD/USB START/PAUZE
11.	VOLUME +
	Volume –
12.	DEMP
13.	WILLEKEURIG
14.	Kanaal-
15.	VOLGENDE /AFSTEMMEN
16.	INVOEREN
17.	MONO/ST
18.	Kanaal+
19.	SLAPEN
20.	X-BASS
21.	EQUALIZER
22.	BRON

De afstandsbediening gebruiken

Er is al een type CR2025 batterij geïnstalleerd in de afstandsbediening. Trek vóór gebruik het isolatievelletje van de batterij af, zoals hieronder staat afgebeeld.

+ 42 hidden pages