7) Do not block any ventilation openings, install in accordance with the instructions.
8) Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized plug. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10) Protected the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Unplug this apparatus during lighting storms or when unused for long periods of time.
13) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
14) Mains plug is used as the disconnect device, the disconnect device shall remain readily operable.
15) The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers,
table-cloth, curtains, etc.
16) No naked flame sources, such as lighted candles, should be placed on the apparatus.
17) Attention should be drawn to the environmental aspects of battery disposal.
18) The use of apparatus in moderate climate.
19)Portable Cart Warning
A product and cart combination should be moved with care. Quick stop, excessive force, and
uneven surface may cause the product and cart combination to overturn.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
The symbol indicates that dangerous voltages constituting a risk of electric shock are present within this unit.
The symbol indicates that there are important operating and maintenance instructions in the literature accompanying
this unit.
This symbol indicates that this product incorporates double insulation between hazardous main voltage and user
accessible parts. When servicing use only identical replacement parts.
2
Caution
• Please use the original box and packing materials for safe transportation of this product.
• It is normal for the cover and rear panel to become warm after the player has been
operating for an extended period of time.
• Do not move this product during playback. Doing so may cause damage to the pickup and
the disc.
• Press OPEN/CLOSE on the front panel or remote to open or close the disc tray. Do not
push or touch the tray while it is opening or closing.
Features
Disc formats and features supported by this player:
MPEG4 files on discs
MP3 files on CD-R/CD-RW
DVD video
You can help protect the environment! Please remember to respect the local regulations: hand in the
non-working electrical equipments to an appropriate waste disposal center.
This product incorporates copyright protection technology that is protected by method claims of
certain U.S.patents and other intellectual property rights owned by Macrovision Corporation and other
rights owners.Use of this copyright protection technology must be authorized by Macrovision
Corporation, and is intendedfor home and other limited viewing uses only unless otherwise authorized
by Macrovision Corporation.Reverse engineering or disassembly is prohibited.
Multi-angle
Subtitle choices
Audio choices
TV Aspect Ratio modes
Parental Lock
The product complies with the Photo CD format and will display Photo CDs.
3
Front Panel and Rear Panel Illustration
Front Panel
Back Panel
1. Power
2. Tray Door
3. LED
4. Sensor
5. Prev Button
6. Stop Button
7. Next Button
8.USB Port
9. Play/Pause Button
10. Open/Close button
11. Digital Audio Coaxial Output
12. SCART Output
4
Remote Control
1. OPEN/CLOSE
2. POWER
3. 0-9 NUMBER KEY
4. ZOOM/MENU
5. SUBTITLE/TITLE
6. SETUP
7. UP
8. LEFT
9. DOWN
10. REVERSE
11. FORWARD
12. PREVIOUS
13. NEXT
14. MUTE
15. USB
16.GOTO
17.AUDIO/ANGLE
18.REPEAT/ PROGRAM
19. PLAY/PAUSE
20. STOP
21. RIGHT
22. OK
23. VOLUME INCREASE
24. VOLUME DECREASE
25. DISPLAY
Note:
Press 4, 5, 17, 18 for more than 1.5s, there will be functions marked on these
buttons(MENU, TITLE, ANGLE, PROG).
Press 4, 5, 17, 18 for less than 1s, there will be functions marked above these
buttons(ZOOM, SUBTITLE, AUDIO, REPEAT).
5
Connections
CONNECT DVD PLAYER TO TV SET WITH SCART SOCKET
Use the SCART cable to connect DVD player and your TV. Set the [Video Out] to [RGB].
CONNECT DVD PLAYER TO AV AMPLIFIER WITH DIGITAL AUDIO(COAXIAL)
OUTPUT
1. Connect the coaxial digital audio output to the AV amplifier.
2. Set the DVD player's [Digital Output] to [Raw] or [PCM]
3. Set the AV Amplifier to the digital input connected to the DVD player.
6
SYSTEM SETUP
MENU OPERATION
Press the SETUP button on the remote control, the SETUP MENU will be displayed.
Use the up/down buttons for up and down movement trough the menu Press RIGHT
direction button to enter the submenu and press left direction button to go back to the
previous menu. Confirm the adjust settings by pressing the OK button
LANGUAGE SETUP
Select Language in the setup menu, and display the Language submenu:
OSD Language
Use this item to select the language of the setup menu and screen display.
Subtitle
Use this option to select the default subtitle language.
Note:Not all discs support this option.
MPEG4 Subtitle
Select different MPEG4 subtitle encoding option.
Note: Not all discs support this option.
Audio
Use this option to select the default disc language.
Note: Not all discs support this option.
DVD Menu
Use this option to select the default menu language.
Note: Not all discs support this option.
VIDEO SETUP
Select Video in the setup menu, and display the Video submenu:
7
SYSTEM SETUP
Aspect Ratio
Use this option to select the aspect ratio.
Notes:
The image display ratio is related to the recorded disc format. Some disc can not display images
in the aspect ratio you choose. If you play a disc recorded in 4:3 format on a wide screen TV,
black bars will appear on the left and right side of the screen. adjust the screen setting depending
on the type of the television you have.
TV System
Select the desired TV system.
Note: The DVD player setting should be matched to your TV set.
For more information of output format, refer to the instructions of your TVset.
Video Out
Select the desired video output format.
AUDIO SETUP
Select Audio in the setup menu, and display the Audio submenu.
Digital output
Adjust the audio output on Coaxial ports to work in harmony with the audio equipment
(e.g.receiver, amplifier) connected to the player.
Off Digital audio output is disabled.
PCM Transfer stereo 2 channels signals
RAW
Down sampling
Select down sampling function on or off.
ON: System will down sampling rate for high sampling rate audio(more than 96K).
OFF: Disable this function.
8
SYSTEM SETUP
RATING SETUP
Select Rating in the setup menu, and display the Rating submenu:
Parental Control
Set the parental control feature of theplayer
Note: Password is needed before setting Parental Control.
Set Password
Input four digits (password), then press OK to confirm.
Note: If you forget your password, please use the universal password 6666 tounlock.
MISC SETUP
Select MISC in the setup menu, and display the submenu:
Use Default Settings
Reset setup data to factory default value.
Screen Saver
Enable/disable the screen saver function.
9
MP3/WMA/JPEG/MPEG4 PLAYBACK
The MP3/WMA/MPEG4 disc has such a directory structure asshown picture above.
Press Direction key to choose the root directory and then press ENTERbutton to enter the sub
directory. Use Direction keys to choose thedesired track and press OK to play the selected file.
To return to the upper menu, press Direction keys and choose , press OK button to go
back to the upper menu. Use direction keys to enter the play settings menu (right part of the screen). Open option submenu by pressing OK. Select desired setting and confirm with OK.
Option menu
Filter: Allows selecting the categories of files displayed in the browser list.
Repeat: To switch different repeat playing mode
Mode: Select different playing mode as follows:
Normal: Normal playback.
Shuffle: Shuffle mode enabled. When playback reaches the end of the current
chapter/track, playback jumps to a random chapter/track
10
PHOTO CD PLAYBACK
The PHOTO CD disc has such a directory structure structure as shown in the following picture.
Press Direction key to choose the root directory and then press OK button to enter into the sub
directory. Press Direction key to choose the desired picture and then press OK to open the
picture. Once opened a picture the slideshow will start automatically. Press Play/Pause button
to pause or resume the playback of the slideshow. To return to the upper menu, press Direction
key to choose the icon and press OK button.
Image rotation
In picture play state, press Direction keyto rotate the picture.
USB
USB
Before entering USB Mode make sure there is no CD/DVD in the tray,(when there is please
remove it). Insert a USB device or MP3 Player in the USB Interface to play the MP3 music or and
JPEG files. The controls are equal to playing a disc, see chapter MP3/WMA/JPEG/MPEG4
playback.To open the USB Interface Mode press USB button, use direction buttons to select
USB Mode and enter by pressing OK.
Note: Not all USB device can be supportedby this system.
warning:The USB memory stick should be plug in the unit directly. USB extension cable
should not be used to avoid failing of data transferring and interference caused.
11
Troubleshooting
If you have any questions, please consult the troubleshooting guide below.
NO PICTURE OR SOUND
• Ensure the power button is on.
• Ensure the power outlet is operational.
• Ensure the power cord is not damaged.
• Ensure the power plug is connected firmly to the
• Ensure the disc is not warped, damaged or deformed.
• Ensure the disc is not badly stained or damaged.
• Ensure the disc format is compatible with the player.
• Please check whether you have tried to play a software CD.
outlet.
PICTURE BUT NO SOUND
• Ensure the audio jacks are securely connected.
• Ensure the audio connector is not damaged.
• Ensure the volume is turned up in VOUCH setup.
• Ensure you have set the player's AUDIO settings correctly.
• Ensure you have entered the correct AV input for your TV
• Ensure the audio is not set to mute.
SOUND BUT NO PICTURE
• Ensure the video jacks are securely connected.
• Ensure you have entered the correct AV input for your TV
• Ensure the video connector is not damaged.
• Ensure you have set the player's VIDEO settings correctly.
"BAD DISC" DISPLAYED
If so, please restart the player.
REMOTE NOT WORKING
• Make sure the Main units POWER button is on
• Ensure the remote batteries are working.
• Point the remote control directly at the player's IR
sensor.
• Remove any obstacles between the remote and
the IR sensor.
UNIT NOT WORKING
• Turn off the power, and then turn it on again.
POOR PICTURE OR SOUND
• Ensure you have set the player's AUDIO settings correctly.
• Ensure the disc is not scratched or stained.
• Ensure the AV connector or the output terminal is not
damaged.
"NO DISC" DISPLAYED
. • Ensure you have put the disc on the tray.
• Ensure the disc is not upside down.
• Ensure the disc is not distorted, stained or
scratched.
12
13
Specifications
Power requirements: AC 100-240 Volt, 50/60Hz
Power consumption: 15W
Video standard: NTSC/PAL
Discs Compatibility: MPEG4,DVD,DVD+/-R/RW,VCD,JPEG.CD-DA,CD-R, CD-RW
Video out
Video out: 1.0V(p-p)/75Ω, sync, negative polarity
Audio out
Audio out level: 2Vrms -1/+0.2
Frequency response: 20Hz to 20kHz
S/N ratio: >90dB
Total harmonic distortion: <0.025%
Accessories
Remote Control x 1
User's Manual x 1
Note: Specifications are subject to change without notice.
For information and support, www.lenco.eu
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.