In some types of industrial production, the use of high-performance stereomicroscopes for visual inspection has now become
mandatory at all stages, being the only way to ensure quality and
to avoid consequential costs arising from deficiencies in quality.
The Leica MS5 and MZ6 stereomicroscopes provide a way of performing quality inspection, precision work and training under ideal
conditions and at reasonable cost. The Leica M series stereomicroscopes feature two parallel beam paths and a common main
objective (Common Main Objective construction) and are parfocally adjusted. This elaborate optics system guarantees viewing
without tiring, constant sharpness during magnification change
and allows for simple adaptation of all types of accessories.
The Leica MS5 and MZ6 stereomicroscopes are instruments with
a favorable price-performance ratio which have proven themselves in technology and natural sciences on a worldwide level
as economical and reliable working instruments.
Investment with a future
Thanks to the extensive accessories, Leica MS5 and MZ6 are the
most expandable stereomicroscopes of this class and prove to be
an investment which will pay off in the long term. Leica Microsystems carries the largest range of objectives, binocular tubes,
ErgoModules
micrography, dual-station viewing and drawing.
Patented ESD protection saves on costs
The Leica MS5 and MZ6 optics carrier, 45° binocular tube,
ErgoTube
Leica L2 and Leica CLS cold light sources consist of patented
ESD-discharging material (surface resistance <1011 Ohm/square,
discharge time <2 seconds, 1000V to 100V).
You will find detailed information about the Leica MS5 and MZ6
stereomicroscopes also on our web site at
www.leica-microsystems.com
®
, and accessories for digital imaging, video, photo-
®
, ErgoWedge® 5°–25°, ESD swing-arm stand and
View of a crimp
Examination of Alrosa diamonds
Leica MZ6 with 45° binocular tube and incident-light stand,
Leica MS5 with 45° binocular tube and Standard swing-arm stand,
Leica MS5 with Leica DFC320 digital camera,
HD F photo tube and transmitted-light base
®
ErgoTube
Trademark Office.
2
and ErgoModule
®
are registered at the United States Patent and
Leica Design
by Ernest Igl/Christophe Apothéloz
Page 3
Page 4
Work ergonomically,
view without tiring
MZ6 zoom
magnification
changer, and
ratchet stops for
seven positions
Plenty of room
for large specimens: the new
Leica incidentlight base
Motor focus for
repetitive tasks
Step or zoom magnification
The Leica MS5 stereomicroscope has five precise magnification
steps, so investigation, measurement, drawing and photography
can be repeated with identical magnification. The Leica MZ6 stereomicroscope, with its 6:1 zoom magnification changer, has
engageable ratchets at specific magnifications, but also offers a continuous zoom capability throughout the magnification
range. Whether equipped with achromatic, planachromatic or
planapochromatic objectives, the Leica MS5 and MZ6 meet the
many requirements of all user segments.
Ergonomics throughout
Users of the Leica MS5 and MZ6 stereomicroscopes can benefit
from the largest available range of binocular tubes with various
viewing heights, allowing one to work comfortably at the instrument. The Leica ErgoModules® also ensure correct posture at the
work place: from ErgoWedge® ±15° to the ErgoTube® with continuously adjustable viewing angle from 10° to 50° provide the functions
to be perfectly adjusted for any user.
The compact, attractive design and the modern, warm materials
make handling of the Leica M series particularly pleasant. The practically-oriented arrangement of the drive knobs allows for comfortable
focusing with propped-up hands. The spacious incident and transmitted-light stands provide space for comfortable specialty stages
such as the gliding stage and cup stage and the Leica MATS thermo
stage. The Thermocontrol System Leica MATS allows observation
of temperature-sensitive specimens and living cells in biology, medicine and pharmaceutics under identical temperature conditions.
Largest selection
of objectives,
lead-free
4
Page 5
Leica MS5 with ErgoTube
and manual cross-stage
®
Leica MS5 with 45° ErgoTube®
and manual cross-stage
Leica MS5 with trinocular tube,
Leica DFC480 and manual cross-stage
Ergo objective
The Ergo objective 0.4× – 0.63× allows ergonomical and fine focusing in the 90mm range (working distance 63.5 – 153.5mm) without
changing the viewing height. At the time, magnification and working distance can be changed without time-consuming objective
change.
Wide range of illuminations
The modular Leica L2 cold light source is powerful, compact and
suitable for all applications in industry and natural sciences. In
addition to oblique illumination with one or two-arm light guides,
corresponding accessories are also available for coaxial, vertical and transmitted-light illumination methods. Leica L2 is the only
cold light source that can be directly coupled to the stand. This
allows the complete equipment to use the least amount of space.
The Leica CLS series is a high-performance line with cold light
source for high light intensity and flicker-free white light with the
lowest possible thermal effect on the objects.
The new Leica LED1000 (Laser Emitting Diode) illumination is
available with ring illuminator, spot or transmitted light. LEDs that
are not developing any heat are used as illumination sources.
The Leica L5 FL cold light fluorescence system is designed for blue
or green fluorescence with an excellent price/performance ratio.
The Leica L5 FL simplifies the daily routine work in the laboratory
and is suitable for training courses, forensic and industrial stereofluorescence applications.
Ergo objective
0.4× – 0.63×
for rapid fine-
focussing
ErgoModule®
30mm – 120mm,
adjustable
OEM drive
housing,
inclinable
Equipment as desired
The stereomicroscope can be turned 360° in its carrier for use
in lateral working positions. For regular photography or measuring, or when working with polarization techniques, the model AX microscope carrier is recommended because it permits
both stereoscopic and vertical observation. The vertical mode
excludes the risk of parallax-angle measuring errors and also
ensures correct polarization colors.
Users choose between the coarse focus, the coarse/fine focus
and the motor focus. The inclinable focusing drive can be fitted
to bonders and other machines in the electronic component industry.
5
Page 6
Unlimited possibilities
Flexible equipment for your examinations
Stereomicroscopes can be used for the nondestructive observation of unprepared objects such as circuit boards and small components, and smaller animals and plants can be examined in vivo
and in their entirety. Using the spatial 3-D image, large fields of
view and moderate magnifications can provide an overall view
and permit manipulations of the sample or specimen.
The Leica IsoPro™ cross-stages, which were designed specifically for stereomicroscopes, are especially suitable for large specimens. Their precision and low design enhance the efficiency of
your day-to-day work.
Leica DC150 digital camera
Space for your large projects
The three new swing-arm stands, ESD, Standard and Large extend
the range of applications for MS5 and MZ6 enormously. Here, you
can choose from a number of equipment versions, according to
task and budget: The ESD in conjunction with the small base is the
right choice for the limited budget, the Standard swing-arm stand
makes child's play of continual positioning thanks to its ball-bearing mounting, whereas the large swing-arm stand, with its height
of 560 or 800mm, provides sufficient space for very large samples.
You can rest assured that the numerous ergonomic details will
make your work as non-tiring and easy as possible.
The new manual Leica IsoPro™ stereomicroscopy cross-stage
Leica MS5 with Standard swing-arm stand, central base,
two-arm gooseneck light guides and Leica L2 cold light
source
6
Page 7
Accessories for image acquisition
The base instrument can always and unproblematically be combined with various accessories. The six video/photo tubes can
universally be used for Leica photomicrographic systems, and
digital, video, film or SLR cameras.
Leica digital imaging systems
The Leica DFC camera line allows rational creation, processing, reprocessing and archiving of digitized images in industry,
medicine and research. Our product line reaches from standard
camera for universal application to high-end camera. The Leica
Application Suite (LAS) includes a variety of modules covering
everything from digital measurement to image optimization and
complex imaging sequences.
Leica IC A and IC D compact modular cameras
The Leica IC A (analog video) and IC D (digital still) modular cameras are designed to upgrade workstations ergonomically, without additional adapters or tubes. These cameras open up new
opportunities for image analysis in the sciences, for industrial
quality control, for live presentations in front of large audiences,
and in digital post-processing.
economical wide fi eld eyepieces 10×/21, soft eyecups
Dioptric adjustment +5 to –5
Binocular tubes, ergonomics Various ErgoModules
®
, ErgoTube® with variable viewing angle 10°–50°,
apochromatic
Interpupillary distance52mm to 76mm
Stands, illuminators
Focusing drive Coarse, fi ne, manual and motorized, tiltable for OEM adaptations (bonders)
Incident-light stand Two large stands, 300mm and 500mm side-faced columns, sub base
Microscope carrier Two basic heights, stereoscopic or axial observation
Swing-arm standESD and Standard version with 470/35mm column, version with 20–50mm
table clamp or fl ange, large stand with short 560/57mm column or longer
800/57mm column
Universal stand450/50mm or 800/50mm column, magnetic carrier for stages
Transmitted-light stands Bright fi eld, bright and dark fi eld, high-performance base
StagesVarious, incl. rotating polarization stage, Leica MATS thermocontrol
ESD-conducting, LED illumination (Laser Emitting Diode), fl uorescence
Accessories
Video, fi lming Various confi gurations, and integrated Leica IC A video module
Leica digital imaging systems, software
for archiving and for post-processing
Leica DFC camera line, Leica IC D integrated digital camera
Image Manager Leica IM500/IM1000, Leica Application Suite LAS
Equipment for discussion Ideal for training and double inspection methods
Drawing tubeFor left- and right-handed users
Double-iris diaphragm Increases the depth of fi eld
Measuring graticules For measuring lengths and for counting
Filter-slide housing For two gelatin fi lters
Vertical and oblique observation45° side view around the object
For the latest information and updates, please visit our homepage: www.leica-microsystems.com
www.leica-microsystems.com/MS5_MZ6
Illustrations, descriptions and technical data are not binding and may be changed without notice.
Printed on chlorine-free paper with a high content of recycled fibre.