Page 1
Leica M Stereo-
microscopes
User Manual
Page 2
Page 3
3
Leica M Stereomicroscopes User Manual
Dear User
Thank you for choosing our products. We hope that you will enjoy the quality and performance of Leica Microsystems products.
In developing our instruments, we have placed great emphasis
on simple, self-explanatory directions. In order to utilize all the
benefits of your new stereomicroscope, we suggest studying
this user manual in detail. Should you have any questions, please
consult your local Leica representative. You will find the address
of the closest local representative as well as valuable information about products and services from Leica Microsystems on
our homepage at www
.leica-microsystems.com
We are gladly at your service. Customer service is a big thing
with us. Not only before the sale, but afterwards as well.
Leica Microsystems (Switzerland) Ltd
Stereo & Macroscope Systems
www
.stereomicroscopy.com
User Manual
Your instrument is accompanied by a printed English user manual. Additional language versions and information can be found
on the interactive CD-ROM. User manuals and updates are
available for download on our homepage at
www
.stereomicroscopy.com.
This user manual contains an explanation of the safety regulations, assembly, handling and accessories of the Leica MS5,
MZ6, MZ7
5, MZ95, MZ125, MZ16, MZ16 A and MZ16 FA
(if identical) stereomicroscopes. The special functions of the
automated stereomicroscopes Leica MZ16 A and MZ16 FA can
be found in separate user manuals.
Page 4
Leica M Stereomicroscopes User Manual
Table of contents
4
Page
Overview
Safety concept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Controls and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Use
Changing the magnification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Ergonomics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Interpupillary distance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Eyepoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Eye contact, eyecups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Focusing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Microscope carrier: Stereoscopic and axial observation . . . . 18
Diopter settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Assembly
Overview: Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Stand
Profile column for incident light and transmitted-light stands . . 23
Transmitted-light stand, bright field, 20 W . . . . . . . . . . . . . . . . . . 23
Transmitted-light stand, bright and dark field . . . . . . . . . . . . . . . 26
Transmitted-light stand HL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Swinging-arm stand ESD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Large swinging-arm and table-clamp stands . . . . . . . . . . . . . . . 30
Optics carrier, optical accessories
Spacer rings, objective combinations . . . . . . . . . . . . . . . . . . . . . 32
Microscope carrier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Optics carrier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Binocular tubes, optical accessories . . . . . . . . . . . . . . . . . . . . . . 35
Objective nosepiece (MZ16 and MZ16 A) . . . . . . . . . . . . . . . . . . 36
Page 5
5
Page
Illuminators
Transformers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Incident lamp 6 V/10 W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Incident lamp 6 V/20 W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Cold light sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Fiber-optic light guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
LED illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Supply (line) lamp 25 W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Coaxial illuminator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Near-vertical illuminator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Accessories
Fitting accessory tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Double-iris diaphragm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Drawing tube, discussion tube . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Video/phototubes:
Photography, video, TV, filming, digital imaging . . . . . . . . . . . . . 52
Attachment for vertical and oblique observation . . . . . . . . . . . . 56
Graticules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Stages, polarization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Special notes
Tips and hints: What to do if . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Care and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Calculating total magnification and field
of view diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Optical data for MS5, MZ6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Optical data for MZ7
5, MZ95 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Optical data for MZ12
5, MZ16, MZ16 A . . . . . . . . . . . . . . . . . . . . 66
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Technical data electronical devices . . . . . . . . . . . . . . . . . . . . . . .74
Leica M Stereomicroscopes User Manual
Page 6
Read the user manual and safety instructions before starting up.
The Leica MS5, MZ6, MZ75, MZ95, MZ125, MZ16 and MZ16 A stereomicroscopes are optical instruments which use magnification for improved
visualization of objects, their details and specimens from technology and
natural sciences. The basic outfit, which includes a stand and a light
source, can be supplemented with various modules for photography, TV,
dual station viewing and other applications.
• The use of the instrument in a different manner from that described in
this user manual can lead to injury, malfunction and damage.
• The Leica MS5, MZ6, MZ7
5, MZ95, MZ125, MZ16 and MZ16 A stereo-
microscopes must not be used for eye examinations and operations.
• Do not fit different plugs. Do not dismantle optical systems or mechani-
cal parts unless instructions for doing so are given in the user manual.
• The Leica MS5, MZ6, MZ7
5, MZ95, MZ125, MZ16 and MZ16 A stereo-
microscopes are intended mainly for indoor use.
• If the stereomicroscope is used outdoors, protect it from dirt and mois-
ture. Lamps and electrically-operated stands from Leica may not be
used outdoors.
The optics carriers MS5, MZ6, MZ7
5, MZ95, MZ125, MZ16 and MZ16 A, the
binocular tube, ErgoTube™, ErgoWedge™ 5°–25°, the swinging-arm
stand ESD and the cold light sources Leica L2 and CLS consist of ESDdischarging material (surface resistance <10
11
ohms/squared, discharge
time <2 seconds, 1,000 V to 100 V).
– A connection socket for a ∅ 4 mm grounding cable is provided on the
microscope carrier.
– There are two connection sockets for ∅ 4 mm grounding cables in the
base of the swinging-arm stand.
The Leica M series can be used in clean rooms without any problems and
they can be cleaned as described on page 60. Please observe the
following rules:
– Do not clean our stereomicroscopes and accessories in a different
manner from that described in this user manual. Do not use unsuitable
cleaning agents, chemicals and techniques. Do not clean painted
surfaces and accessories with rubber parts such as the ErgoTube
®
10° – 50° with chemicals.
This can damage the surfaces. Particles or grindings can contaminate
the specimen.
– If the customer cleans our instruments with chemicals without our
written approval he will do it at his own risk.
– In most cases we can offer special solutions on request. Some
products can be modified or we could recommend other accessories
for use in clean rooms.
6
Leica M Stereomicroscopes – Safety concept
General directions
Permitted uses
Prohibited
uses
Place
of use
Use in ESD
protected rooms
Use in Clean Rooms
Safety concept
Page 7
7
Leica M Stereomicroscopes – Safety regulations
Repairs may only be carried out by Leica-trained service technicians.
Only original Leica spare parts may be used.
• Ensure that personnel who use the instrument have read and
understood this user manual and in particular the safety
instructions.
• Ensure that the Leica MS5, MZ6, MZ7
5, MZ95, MZ125, MZ16
and MZ16 A stereomicroscopes are operated, maintained
and repaired only by
authorized and trained personnel.
Workplaces with stereomicroscopes facilitate and improve
the viewing task, but they also impose high demands on the
eyes and holding muscles of the user. Dependent upon the
duration of uninterrupted activity, this may lead to asthenic
trouble and muscular-skeletal pain so that suitable measures
must be taken to reduce the strain:
– perfect design of workplace (see p.14), work content and
work process (frequently changing activities).
– detailed introduction of the personnel while considering
ergonomic and organizational work-related aspects.
The ergonomic optics concept and the design of the Leica M
series aim at limiting the strain on the user to the lowest possible level.
Direct contact with eyepieces can be a potential transmission
path for bacterial and viral infections of the eye. Users should
be made aware of the potential risk of infection. The risk can be
kept at a minimum by using individual eyepieces or attachable
eyecups (see p.16).
Servicing
Responsibilities
of person in charge
of instrument
Safety regulations
Page 8
Liquids
Power cables
Cable routing
Opening the instrument
Supply voltage
Connections
Changing bulbs
8
Leica M Stereomicroscopes – Safety regulations
Electrically-operated items
The safety regulations listed below apply to the following items:
– Transmitted-light stand, bright field, 20 W (page 24)
– Supply (line) lamp 25 W (page 47)
– Regulating transformer 0–7 V/40 W (page 38)
– Step transformer 4/5/6 V (page 39)
– Motor focus (separate instructions)
– Motorized Leica MZ16 A
Be careful when handling liquids.
If spilt on the equipment, they can:
– cause the stereomicroscopes and accessories to become
electrically live, endangering personnel,
– cause damage to the equipment.
Inspect cables regularly for damage. Defective cables can:
– directly endanger personnel,
– cause the stereomicroscopes and accessories to become
electrically live, endangering personnel.
Route cables with care. Make sure that personnel do not get
entangled with them. The instrument could fall over, fall down,
become damaged, damage other equipment, or cause personal
injury.
Only authorized Leica personnel are permitted to repair electrical equipment. Before opening up the equipment, pull out the
power cable. If you touch the live interior of the equipment, you
may receive an electric shock.
Ensure that the voltage setting on the equipment is correct.
A wrong setting can cause damage to the equipment.
When connecting power-consuming devices to the transformers, do not exceed the maximum permitted loading, as this can
cause damage to the equipment.
• Before changing a bulb, disconnect the power cable.
• Never attempt to touch the inside of a lamp housing or
transmitted-light stand while the instrument is connected
to the power supply.
• Before changing a bulb, wait until it is cool, otherwise you
may burn your fingers.
Page 9
The following must be observed if Leica products are build into
third-party products:
The manufacturer of the complete system or the person putting
it on the market is responsible for adhering to applicable safety
regulations, laws and guidelines.
Adhere to general and local regulations relating to accident
prevention and environmental protection.
The products described here must be disposed off in accordance with applicable local laws and regulations.
The electrically-operated accessories for the Leica MS5, MZ6,
MZ7
5, MZ95, MZ125, MZ16 and MZ16 A stereomicroscopes are
constructed in accordance with the latest technologies and
provided with a statement of conformity with EC requirements.
Symbols used in this user manual
Safety instructions
This symbol denotes information which must be read and
obeyed. Non-observance
– can put personnel at risk!
– can cause malfunctioning or damage to the equipment.
Warning about accessible hot places, e.g. bulbs.
Failure to respect it can cause burns!
Important information
This symbol denotes additional information or explanations
which promote understanding.
Action
왘 This symbol within the text indicates that certain operations
must be carried out.
Explanatory notes
• This symbol within the text stands for additional information
and explanations.
Integration in
third-party products
Legal requirements
Disposal
Conformity with
European Community
directive
9
Leica M Stereomicroscopes – Safety regulations
Page 10
Stereomicroscope
1 Magnification changer
2 Engaging ratchet positions
3a Focusing drive
3b Coarse and fine focusing
Larger knob: Coarse focusing,
Smaller knob: Fine focusing.
3c Adjustable ring
Changes the ease of movement
of the coarse/fine drive.
4 Clamping screw
Holds the optics carrier in the
microscope carrier.
5 Clamping screw
Holds the binocular tube (or accessory)
to the optics carrier.
6 Interchangeable objective
Achromatic, planachromatic or planapochromatic
Binocular tube
7 Adjustable eyepiece tubes
Interpupillary distance adjustable from
52 mm – 76 mm.
8 Wide-field eyepieces for persons wearing
glasses
Diopter setting adjustable within the range
from +5 to –5, and eyecups adjustable.
9 Clamping screws
These hold the eyepieces in the
binocular tube.
10 ErgoTube™
The viewing angle is adjustable within the
range 10° – 50°.
11 Built-in double-iris diaphragm
(MZ16/MZ16 A only)
• The special functions of the Leica MZ16 A are
shown in the user manual M2-116-0.
10
Leica M Stereomicroscopes – Overview
Overview
Leica MS5
9
7
5
4
6
1
3a
8
Leica MZ6
9
7
5
4
6
1
2
3a
8
Page 11
11
Leica M Stereomicroscopes – Overview
Leica design
by Ernest Igl/Christophe Apothéloz
Leica MZ95
7
5
4
6
2
1
3c
3b
8
Leica MZ75
7
5
4
6
2
1
3c
3b
8
Leica MZ125
7
5
10
4
6
2
1
3c
3b
8
Leica MZ16
7
5
10
11
4
6
9
1
2
3b
3c
8
Page 12
Magnification changer
• Zoom means continuous change of magnification.
Ratchets can be engaged for certain magnifications
(see below).
• For zooming with MZ16 A, see the user manual M2-116-0.
MS5: 5 steps
MZ6: 6:1 zoom
MZ7
5: 7.9:1 zoom
MZ9
5: 9.5:1 zoom
MZ12
5: 12.5:1 zoom
MZ16 and MZ16 A: 16:1 zoom
• The magnification changer can be operated from either
the right or the left side.
왘 Look into the eyepieces.
왘 Focus on the object (page 16).
왘 Turn the magnification changer
to the desired position.
MZ6: 0.8, 1, 1.25, 1.6, 2, 2.5, 3.2
MZ7
5: 0.8, 1, 1.25, 1.6, 2, 2.5, 3.2, 4
MZ9
5: 0.8, 1, 1.25, 1.6, 2, 2.5, 3.2, 4, 5
MZ12
5: 1, 1.25, 1.6, 2, 2.5, 3.2, 4, 5, 6.3, 8
MZ16: 0.8, 1, 1.25, 1.6, 2, 2.5, 3.2, 4, 5, 6.3, 8, 10
• Engage the ratchets whenever magnifications need to be
exactly reproducible.
왘 For MZ6, MZ9
5, MZ125 and
MZ16: Press the switch.
왘 For MZ7
5: Turn the knurled ring
counterclockwise.
For setting ratchets at the MZ16 A,
see the user manual M2-116-0.
Changing the
magnification
Ratchet steps
12
Leica M Stereomicroscopes – Operation
Use
Page 13
MS5, MZ6: Display of magnification factors from 0.63–4.
MZ7
5: Display of magnification factors from 0.63–5.
Corresponding scales for other objective and eyepiece combinations can be affixed to the rotary knobs (page 34).
MZ9
5: Display of magnification factors from 0.63–6.
MZ12
5: Display of magnification factors from 0.8–10.
MZ16, MZ16 A: Display of magnification factors from 0.71–11.5
MZ16 A: For the digital display of the magnification see the user
manual M2-116-0.
The tables on pages 62 – 66 provide information about the
magnifications and field of view diameters as a function of the
magnification changer position of the eyepiece-objective
combination used.
When the MZ12
5/MZ16 planachromatic and planapochromatic
objectives are used on the Leica MS5, MZ6, MZ7
5 and MZ95,
the magnification is increased by the factor 1.25× . This factor
is taken into account in the tables.
Scale of
magnifications
Magnifications
and fields
of view
Magnification with
MZ12
5/MZ16
planachromatic and
planapochromatic
objectives
13
Leica M Stereomicroscopes – Operation
Magnification on Magnification on
MZ12
5/MZ16 MS5/MZ6/MZ75/MZ95
1× plan/planapo 1.25×
1.6× planapo 2×
0.63× planapo 0.8×
0.5× plan 0.63×
0.8× plan 1×
2× planapo 2.5×
Page 14
14
Leica M Stereomicroscopes – Operation
Ergonomics, viewing height
• Pay great attention when setting up your stereomicroscope.
You will only benefit fully from the outstanding optical and
ergonomic advantages of the instrument if you set it up
precisely in accordance with the directions already given.
• For fatigue-free work, use the ErgoModules™.
• Arrange your workplace as well as possible, and pay
attention to the heights of chair and table.
• When sitting, use the entire seat area and also the back
support of the chair.
• Support your forearms.
• During work breaks, stand up and move around for exercise.
Please also observe the note on p. 7.
The reasons why users often cannot work comfortably with
the 45° tube are the differing heights of the outfits, the various
accessories and working distances, and the fact that the
same instrument is often used by several people of differing
builds. This problem can be effectively solved by using the
Leica ErgoModules™.
If you have problems with the viewing configuration on your
stereomicroscope, ask your Leica consultant for the most
ergonomic Leica solutions.
With the achromatic Ergo objective 0.4×– 0.63× for the Leica
MS5, MZ6, MZ7
5 and MZ95 it is possible to focus in the region
of 90mm (63.5 mm – 153.5 mm) ergonomically and precisely,
without changing the viewing height. At the same time,
magnification and working distance can be changed without
any time-consuming changing of the objectives.
The viewing height is correct when your head and back are
comfortably positioned.
• On the ErgoTube™, the viewing angle
is adjustable from 10° – 50°.
왘 Holding the eyepiece tubes at their
bases, swing them up or down (see
arrow).
Preconditions for
working comfortably
Ergonomics
Ergo objective
Viewing height,
viewing angle
Page 15
– ErgoWedge™ 5° – 25°
– ErgoWedge™ ±15°
– ErgoModule™ 50 mm
– The ErgoTube™ 45° has eyepiece tubes which are 65 mm
longer than the standard ones.
Magnification factor 1.6×.
MZ16 A: The magnification factor can be toggled on and off
using the OPT key.
– ErgoModule™ 30 – 120 mm
Relubrication may be required
after several years (please send
the item to Leica Service).
The achromatic Ergo objective 0.4×–0.63× can be used to
ergonomically and accurately focus in the range of 90 mm
(63.5–153.5 mm) without changing the viewing height. At the
same time, magnification and working distance can be
changed without time-consuming change of objectives.
Frequently repeated fine-motor tasks, such as focusing by
hand, can lead to muscle fatigue and hand problems. Using the
Leica motor focusing system, every equipment can be moved
up and down without applying force.
Interpupillary distance, eye contact
The interpupillary distance is correct
when you see a single circular field when
viewing with both eyes.
왘 Look into the eyepieces and use both
hands to move the eyepiece tubes closer
together or further apart.
The distance between eye and eyepiece measures approx.
22 mm for 10×/21B wide-field eyepieces for persons wearing
glasses and 12 mm for 10×/21 wide-field eyepieces.
왘 Slowly approach the eyepieces with
your eyes until you can see the complete
image field without corner cutting.
ErgoModule™
Ergo objective
Motor focus
Interpupillary distance
Locating the exit pupil
15
Leica M Stereomicroscopes – Operation
Page 16
You do not wear glasses and prefer close contact with 10×/21B
wide-field eyepieces for persons wearing glasses:
왘 Holding the diopter ring, turn the eyecup
counterclockwise until it is released.
왘 Pull the eyecup upwards.
왘 Holding the diopter ring,
turn the eyecup clockwise.
Persons wearing glasses need the
whole of the available distance.
Move the eyecups to the lowest
position.
The 10×/21B wide-field eyepieces for persons wearing glasses
are supplied with soft eyecups, which can be attached to the integrated eyecups made of hard plastic to achieve the following:
– Prevent eye infections if several users are working at the
same instrument (see p. 7).
– Protect your glasses from being scratched.
The 10×/21 wide-field eyepieces are supplied with laterally
tapered soft eyecups.
Setting the working distance, focusing = obtaining a
sharp image
• To focus, use the focusing drive to raise or lower the stereomicroscope until the feature of interest is in focus ≅ working
distance to the objective.
The working distances of the various objectives are listed in
the tables on pages 62 – 66.
• The focusing drive can be operated from either the right or
the left side.
• When focusing on a new object, always start with the lowest
magnification, because the larger field of view makes the
object easier to find. Afterwards, select the desired magnification.
Selecting the degree
of eye contact
Soft
eyecups
16
Leica M Stereomicroscopes – Operation
Page 17
17
Leica M Stereomicroscopes – Operation
왘 Place the object beneath the objective.
왘 Engage the lowest magnification
(page 12).
왘 Look into the eyepieces.
왘 Using the rotary knob, bring the
object into focus.
The coarse/fine drive supports up to
15 kg.
– Resolution with 5 kg load: 1 µm
– Resolution with 10 kg load: 2 µm
왘 Focus approximately with the
larger knob.
왘 Fine-focus with the smaller
(concentric) knob.
Is the focus movement too loose or too tight? Does the outfit
tend to slide downwards? You can adjust the movement in
accordance with the weight of the outfit and with your own
personal requirements:
왘 Hold the drive knobs firmly with
both hands and turn them in
opposite directions until you
obtain the required degree of
resistance during focusing.
왘 Hold the left or right fine drive.
왘 Turn the other fine drive until the
desired resistance during
focusing is reached.
Coarse/fine drive
Adjusting the free
running of the focusing
drive
– Focusing drive
MS5 – MZ9
5
– Focusing drive,
coarse/fine
Page 18
Microscope carrier
• This microscope carrier permits only
stereoscopic observation, using both beam paths.
• The microscope carrier can be fitted to the drive
housing in either of two positions (see page 34):
• The optics carrier can be turned sideways in
the microscope carrier if the user needs to
work from the side:
왘 Release the clamping screw.
왘 Turn the optics carrier sideways
as required.
왘 Retighten the clamping screw.
Microscope carrier AX
The stereomicroscopes can be equipped with the microscope
carrier AX for stereoscopic and axial observation instead of
the standard microscope carrier (page 34).
Different models are available for MS5, MZ6, MZ7
5, MZ95 and
for MZ12
5, MZ16 and MZ16 A. The achromatic objectives and
the planochromatic 1× fit in the thread in the AX microscope
carrier for MS5, MZ6, MZ7
5, MZ95 (p. 33).
The planochromatic and planapochromatic objectives fit in the
thread in the AX microscope carrier for MZ12
5, MZ16, MZ16 A
(p. 33). In addition, the AX microscope carrier features a clamping screw for fixing it in one of 3 positions and an aperture which
can be turned manually (see below). Otherwise, the use of and
switching to the left, middle and right position are identical.
• The optics carrier cannot be turned sideways in the microscope carrier AX.
A three-dimensional image is required for examining plastic
objects and for working.
왘 Shift the stereomicroscope to the central position.
Microscope carrier
for stereoscopic
observation
Stereoscopic
observation
18
Leica M Stereomicroscopes – Operation
Page 19
The parallax-free imaging produces more precise results in
photography, measuring and polarization.
왘 Shift the stereomicroscope to the left
or the right position. The object is now
located directly beneath either the left
or the right beam path.
• When photographing or measuring, select the beam path above which the phototube or measuring graticule is located.
A rotating aperture is build into the AX microscope carrier. It
prevents interfering reflections during axial observation with
coaxial incident illuminator and quarter-wave plate.
• With the AX microscope carrier for MS5, MZ6, MZ7
5, MZ95,
the aperture automatically turns during the moving process.
• With the AX microscope carrier for MZ12
5, MZ16, MZ16 A,
the aperture is located underneath the microscope carrier
and must manually be turned as follows:
Please note:
– In the position for stereoscopic observa-
tion through both beam paths, turn the
aperture counterclockwise until it stops.
Otherwise the field of view is underexposed (vignetting).
– In the position for axial observation
through the right or left beam path, turn
the aperture clockwise until it stops.
Axial observation
Aperture
19
Leica M Stereomicroscopes – Operation
Page 20
20
Leica M Stereomicroscopes – Operation
Adjusting diopter settings and parfocality
Leica stereomicroscopes are parfocally matched. This means
that, once you have focused on a feature in the manner described, taking account of diopter settings, you can zoom the
magnification up and down without refocusing. You only need
to refocus if you want to look at higher or lower planes in the
object. A prerequisite is the correct setting of the diopters and
the parfocality.
• The dioptric range is from +5 to –5.
The following adjustments must be carried out only once by
each user. The procedures for adjusting the dioptric setting and
the parfocality are somewhat different if an eyepiece contains
a graticule. Refer to the user manuals for the MPS modular
photomicrographic systems or for measuring.
왘 Install the lamp.
왘 Set the interpupillary distance and,
if necessary, the viewing height.
왘 On the video/phototube: Move the
lever to position "VIS" and open the
diaphragm.
왘 Set the double-iris diaphragm to "OPEN."
왘 Adjust the eyecups.
왘 Set both eyepieces to zero.
왘 Set the microscope carrier AX for
stereoscopic observation.
1. Place a flat test object under the
objective.
2. Engage the lowest magnification
position.
왘 Use the coarse focusing drive to set
the working distance (page 16).
3. Look into the eyepieces
왘 Use the focusing drive, to bring
the test object into focus.
Tips for your work
A Preparations
B Focus on the
test object
Page 21
4. Engage the highest magnification position.
5. Optimize the focus using the focusing drive.
6. Engage the lowest magnification
position.
7. Do not look into the eyepieces.
왘 Rotate the eyepieces counterclockwise
in the "+" direction as far as the stop
(+5 diopters).
8. Look into the eyepieces
왘 Slowly rotate each eyepiece
individually in the "–" direction until
each eye sees the object sharply
imaged.
9. Engage the highest magnification
position.
10. Refocus if necessary.
11. Slowly move the magnification
changer from the lowest magnification
to the highest.
• The image sharpness must remain
constant (parfocal). Otherwise,
repeat the procedure.
C Adjusting
dioptric settings
D Inspecting
parfocality
21
Leica M Stereomicroscopes – Operation
Page 22
The components
1a Incident-light base with stage plate
1b Transmitted-light base with glass stage plate
2a Side-faced column with drive housing, coarse/fine
2b Side-faced column with drive housing, 300 mm or 500 mm
3 Microscope carrier
4 Optics carrier
5 Interchangeable objective
6 Binocular tube
7 Wide-field eyepiece for spectacle wearers, with eyecups
8 Various ErgoModules™ or accessories for video, photography,
drawing, fluorescence, coaxial incident light etc.
22
Leica M Stereomicroscopes – Assembly
Assembly
1a
2a
2b
1b
7
6
4
5
3
8
Page 23
23
Leica M Stereomicroscopes – Assembly
Stand
Incident-light stand
왘 Remove the stage plate.
왘 Insert 3 Allen screws into the underside
of the baseplate and secure them to the
bottom end of the side-faced column.
왘 Insert the stage plate.
To fit the microscope carrier and the stereomicroscope,
see page 34
Transmitted-light stand
Pull the power cable out of the socket in the stand.
왘 Remove the glass stage plate.
왘 Carefully invert the transmitted-
light base and remove 7 Allen
screws from the base.
왘 Lift off the lower part of the base.
왘 Reverse the upper part of the base.
왘 Insert 3 Allen screws into the cover
plate from beneath and secure
them to the bottom end of the sidefaced column.
왘 Replace and secure the base.
왘 Insert the glass stage plate.
왘 Fit the microscope carrier and the
stereomicroscope as described
on page 34.
Technical data see page 74
Side-faced column ➜
incident-light base
Side-faced column ➜
transmitted-light base
Page 24
Transmitted-light stand, bright field, 20 W
Follow the safety instructions given on page 7.
왘 Fit the side-faced column to the transmitted-light base as
described on page 23.
Never touch the bulb when it is hot.
You may sustain burns.
• Do not touch the new 6 V/20 W halogen bulb directly with
your fingers, because finger marks can cause it to crack
when heated.
Remove finger marks immediately with a cloth dipped in pure
alcohol.
왘 Insert the slider together with the
bulb socket.
왘 Hold the new bulb in a cloth and push
it into position.
왘 Push the slider carefully but complete-
ly back along the rail to the stop.
• The transmitted-light stand contains a KG1 filter.
• You can insert other ∅ 50 mm filters if you need them:
왘 Pull out the slider.
왘 Insert the ∅ 50 mm filter.
왘 Push the slider carefully but
completely back along the
rail to the stop.
The ex-factory setting of the voltage selector is 230 (for voltages between 200–240 V) and the fuse holder contains two
160 mAT fuses.
For 100–120 V power supply:
왘 Set the voltage selector to 115.
왘 Fit the enclosed two 315 mAt fuses
in the fuse holder instead of the
two 160 mAT fuses (see the section
"Changing fuses" on the right).
왘 Connect the power cable to the socket
of the base and to the power source.
Fitting the bulb
Filters
Starting up
24
Leica M Stereomicroscopes – Assembly
Page 25
Use:
– Two 160 mAT fuses for voltages between 200–240 V.
– Two 315 mAT fuses for voltages between 100–120 V
(see the section "Starting up" on the left).
왘 Disconnect the power cable from the stand.
왘 Pull out the fuse holder.
왘 Fuse at rear: Press out downwards.
왘 Spare fuse at front: Pull out sideways and
insert into holder at rear.
왘 Push the fuse holder back into position.
On the rear side of the base, there is a
socket for incident lamps of up to 20 W.
• Connect an incident lamp to the transmitted-light stand, if required.
• Either transmitted light or incident light
can be switched on.
왘 For transmitted light: Switch in position I.
왘 For incident light: Switch in position II.
왘 Use thumb wheel to adjust brightness.
왘 On the rear of the stand: Use the thumb
wheel to switch on the transformer and
to adjust the brightness.
왘 Remove the power cable from the power socket.
왘 Switch on transmitted light.
Bright field is suitable for examining translucent objects featuring contrasting structures. The object is directly illuminated
from below and is seen in its natural colors against a bright
background.
왘 For transmitted light, bright field:
Pull lever forwards.
Inclined transmitted light which traverses the object obliquely
will produce effects advantageous for observing small translucent objects such as foraminifera and fish eggs.
왘 Move the lever slowly towards the column of the stand until
the desired effect is obtained.
Changing fuses
Transmitted or
incident light
Switching on the
transformer
Disconnection from
mains power supply
Transmitted light
Transmitted light,
bright field
Inclined
transmitted light
25
Leica M Stereomicroscopes – Assembly
Page 26
Transmitted-light stand, bright and dark field
The illumination of the transmitted-light stand bright and dark
field consists of a fiber-optic light guide and a light source.
Observe the safety regulations from the
manufacturer of the light source.
왘 Unplug the fiber-optic light guide from the connection in
the stand.
왘 Fit the side-faced column to the transmitted-light base as
described on page 23.
왘 Fit the microscope carrier and stereomicroscope as
described on page 34.
왘 Attach the fiber-optic light guide at the stand and the
light source.
Before using the light source, read the corresponding user
manual.
Bright field is suitable for examining translucent objects featuring contrasting structures. The object is directly illuminated
from below and is seen in its natural colors against a bright
background.
왘 Slide handle to the right until the
stop: bright field.
Dark field offers more information for objects poor in contrast
with rather poorly marked or very fine structures. In this case,
the light beams penetrate the object at a flat angle. Fine detail
structures and contours contrast brilliantly and brightly from
dark background.
왘 Slide the handle out to the right:
dark field.
Starting up
Transmitted light,
bright field
Transmitted light,
dark field
26
Leica M Stereomicroscopes – Assembly
Page 27
Transmitted-light stand HL
The column seat contains Allen screws.
왘 Remove the glass stage plate.
왘 Invert the transmitted-light base and place it on a table.
왘 Hold column against the column seat from underneath.
왘 Insert the Allen screws into the column from the top and
tighten them.
왘 Invert the transmitted-light base and insert the glass
stage plate.
왘 Fit additional components such as the microscope carrier
and optics carrier (page 34).
Add a very luminous cold light source and a light guide with
a channel to the transmitted-light stand (TVC, active ∅ 9 mm).
왘 Insert light guide into the base at the rear.
왘 Connect light guide to the light source.
For stereomicroscopes with high apertures such as Leica
MZ12
5, MZ16 and MZ16 A with objective 1.6×, the resolution
can be increased by inserting an accessory condenser.
왘 Push the accessory condenser into the lens holder at the
underside of the transmitted-light base and secure it with
2 Allen screws.
왘 Turn on the light source according to the manufacturer’s
user manual and adjust the light intensity.
왘 Place a transparent object on the glass stage plate and
focus.
The built-in mirror features a clear and an obscured side and
can be rotated and moved. The obscured side provides a diffused illumination. The angle of incidence in the specimen
plane changes depending on the position of the mirror so that
the transmitted light bright field via oblique illumination can also
generate an illumination similar to dark field.
왘 Rotate and move the mirror with the black rotary knob on the
right side.
왘 Adjust exact bright field and maximum illumination: move
mirror to the stand column until it stops.
Rotate the mirror until it engages in the 45° position.
Detailed information about setup, operation and use can be
found in the separate instructions for use M2-216-2.
Column ➜ Base
Illumination
Accessory condenser
➜ Basis
Use
Tilted mirror
Transmitted-light stand
HL-RC™
27
Leica M Stereomicroscopes – Assembly
Page 28
Swinging-arm stand ESD
The swinging-arm stand ESD is of conducting material (surface
resistance <10
11
Ohm/squared, discharge time <2 seconds from
1,000 V to 100 V). Two sockets for connecting ∅ 4 mm ground
cables are provided on the base.
왘 Insert 4 Allen screws into the base
from beneath and secure them to
the end of the column.
The safety ring secures the instrument and must always
be fixed beneath the cross-member.
왘 Slide the safety ring
down the column.
왘 Retighten the clamping screw.
왘 Lower the cross-member onto the
safety ring.
왘 Retighten the clamping screw.
왘 Slide the horizontal arm into the
cross-member with the connecting
piece towards you.
왘 Retighten the clamping screw.
• The drive housing / microscope carrier can be fitted to
the horizontal arm in either of two positions (see page 34).
• The circular port in the microscope
carrier accepts an illuminator.
왘 Insert the peg of the inclinable focusing
drive into the connecting piece.
왘 Retighten the clamping screw.
왘 Fit the optics carrier in the
microscope carrier.
왘 Turn the optics carrier sideways in
the microscope carrier as required.
왘 Retighten the clamping screw.
Assembly of column ➜
base
Safety ring ➜ column
Cross-member ➜
column
Horizontal arm ➜
cross member
Drive housing ➜
horizontal arm
Optics carrier ➜
microscope carrier
28
Leica M Stereomicroscopes – Assembly
Page 29
The focusing knobs are located on the inclinable drive housing.
Is the focus movement too loose or too tight? Does the outfit
tend to slide downwards? You can adjust the movement in
accordance with the weight of the outfit and with your own
personal requirements:
왘 Hold the drive knobs firmly with both
hands and turn them in opposite directions until you obtain the required degree
of resistance during focusing.
Possible adjustments
왘 Release the clamping screw.
왘 Tilt the instrument.
왘 Retighten the clamping screw.
왘 Release the clamping screw.
왘 Raise or lower the cross-member as re-
quired together with the horizontal arm.
왘 Retighten the clamping screw.
Reposition the safety ring (see page 28).
왘 Release the clamping screw.
왘 Move the instrument sideways
on the cross-member.
왘 Retighten the clamping screw.
왘 Release the clamping screw.
왘 Displace the horizontal arm.
왘 Retighten the clamping screw.
Focusing
Tilting
Altering the
working distance
Sideways movement
Altering the overhang
29
Leica M Stereomicroscopes – Assembly
Page 30
Large swinging-arm and table-clamp stands
왘 Use the clamp to secure the column to
a table top 20 mm – 50 mm thick.
왘 Insert 4 Allen screws into the base from
beneath and secure them to the end of
the column.
The safety ring secures the instrument and must always
be positioned beneath the horizontal arm.
왘 Position the safety ring with the screw head uppermost and
towards you, and slide it down the column.
왘 Retighten the clamping screw.
왘 Lower the horizontal arm onto the safety
ring, with its end pointing towards you.
왘 Retighten the clamping screw.
The screw head must engage the notch. It
limits the lateral movement. It may not be
removed, and neither may the safety ring
be milled down.
If the horizontal arm is swung out beyond
the limit, the instrument may fall over.
This section describes the assembly of the focusing drive with
side-faced carrier rod. To fit the focusing drive with peg, refer
to page 28.
왘 Release the clamping lever.
왘 Tilt the carrier rod downwards.
왘 Retighten the clamping lever.
왘 Slide the drive housing with side-faced
carrier rod onto the horizontal arm.
왘 Retighten the clamping lever.
The clamping levers can be positioned
as required.
왘 Pull out the clamping lever along
its axis and turn it.
Table-clamp stand
Swinging-arm stand
Safety ring ➜ column
Safety ring ➜ column
Limitation
Drive housing ➜
horizontal arm
30
Leica M Stereomicroscopes – Assembly
Page 31
왘 Secure as described
on page 34.
왘 Secure as described on page 34.
Possible adjustments
왘 Release the clamping lever.
왘 Tilt the instrument.
왘 Retighten the clamping lever.
왘 Set large distances with the larger
knob.
왘 Fine-focus with the smaller (concentric)
knob.
왘 Using the ring on the right-hand drive
knob, adjust the ease of movement
of the drive.
왘 Release the clamping screw.
왘 Raise or lower the
horizontal arm.
왘 Retighten the clamping screw.
Reposition the safety ring (see page 30).
왘 Release the clamping screw.
왘 Pull out or push in the
horizontal arm.
왘 Retighten the clamping screw.
During the sideways movement,
observe the limit stops (see page 30).
왘 Release the clamping screw.
왘 Displace the horizontal arm.
왘 Retighten the clamping screw.
Microscope carrier ➜
drive housing
Optics carrier ➜
microscope carrier
Tilting
Focusing with
coarse/fine drive
Altering the working
distance
Sideways movement
Altering the overhang
31
Leica M Stereomicroscopes – Assembly
Page 32
10 445 614 MZ6
10 411 589 1x
10 422 562 1.5x
10 447 081 2x
10 473 832 0.8x
10 445 201 0.63x
10 422 563 0.5x
10 422 564 0.32x
Achromat
M1-105-MZ16 / 01.04
10 446 371 MZ75
10 446 272 MZ95
10 447 102 MZ16
10 447 103 MZ16 A
10 445 613 MS5
10 446 172
10 411 589 1x
10 422 562 1.5x
10 447 081 2x
10 473 832 0.8x
10 445 201 0.63x
10 422 563 0.5x
10 422 564 0.32x
Achromat
10 446 275 1x
Plan
10 446 275 1x
Plan
10 445 819 1x Plan
10 446 157 0.5x Plan
10 447 075 0.8x Plan
10 447 157 1x Planapo
10 447 101 2x Planapo
10 447 050 1.6x Planapo
10 447 051 0.63x Planapo
Plan/Planapo
10 445 352
10 315 306
10 367 929
10 445 352
10 315 306
10 367 929
10 446 157 0.5x Plan
10 447 075 0.8x Plan
10 447 157 1x Planapo
10 447 101 2x Planapo
10 447 050 1.6x Planapo
10 447 051 0.63x Planapo
Plan/Planapo
10 446 370 MZ125
10 447 148
0.4-0.63x
Ergo
10 447 107
Spacer rings
32
Leica M Stereomicroscopes – Assembly
Optics carrier, optical accessories
Spacer rings are required in order to attach the objectives for
certain instrument configurations.
• The Leica MZ9
5 is supplied with a spacer ring (10 446 393)
for the smaller-diameter achromatic objectives and 1×
planachromatic objective. When the spacer ring has been
removed by applying the tool provided, the larger-diameter
planachromatic and planapochromatic objectives for the
MZ12
5/MZ16 can be used.
• The Leica MS5, MZ6 and MZ7
5 can also be equipped with the
larger-diameter planachromatic and planapochromatic objectives for the MZ12
5/MZ16 if a spacer ring is fitted (10 446 172).
• When the MZ12
5/MZ16 planachromatic and planapo-
chromatic objectives are used on the Leica MS5, MZ6, MZ7
5
and MZ95, the magnification is increased by the factor 1.25×.
Page 33
33
Leica M Stereomicroscopes User Manual
Objective combinations
C Compatible
CA Compatible if used with intermediate ring (order separately)
0 Intermediate ring is recommended
M Magnification increased by factor 1.25×or higher
* Remove intermediate ring (10 446 393); already included with MZ9
5.
(C) Large fields of view at low magnifications are not fully illuminated.
Part no. MS5 MZ6 MZ75 MZ95 MZ125 MZ16/MZ16 A
Achromat
Achromat 1× 10 411 589 C C C C
Achromat 1.5× 10 422 562 C C C C
Achromat 2× 10 447 081 C C C C
Achromat 0.8× 10 473 832 C C C C
Achromat 0.63× 10 445 201 C C C C
Achromat 0.5× 10 422 563 C C C C
Achromat 0.32× 10 422 564 C C C C
Ergo objective 0.4× – 0.63× 10 447 148 C C C C
Planachromatic
Planachromatic 1× 10 446 275 C C C C
Planachromatic 1× MZ125/MZ16
10 445 819 CA (10 446 172) M CA (10 446 172) M CA (10 446 172) M C*M C C
Planachromatic 0.5× MZ125/MZ16
10 446 157 CA (10 446 172) M CA (10 446 172) M CA (10 446 172) M C*M C C
Planachromatic 0.8× 10 447 075 CA (10 446 172) M CA (10 446 172) M CA (10 446 172) M C*M C C
Planapochromatic
Planapochromatic
1× MZ125/MZ16 10 447 157 CA (10 446 172) M CA (10 446 172) M CA (10 446 172) M C*M C C
Planapochromatic
1.6× MZ125/MZ16 10 447 050 CA (10 446 172) M CA (10 446 172) M CA (10 446 172) M C*M C C
Planapochromatic
0.63× MZ125/MZ16 10 447 051 CA (10 446 172) M CA (10 446 172) M CA (10 446 172) M C*M C C
Planapochromatic
2× MZ125/MZ16 10 447 101 CA (10 446 172) M CA (10 446 172) M CA (10 446 172) M C*M C C
Accessories
Coaxial incident light 10 446 180 C C O (10 446 300) O (10 446 300) C C
Microscope carrier AX 10 445 618 C C C C
MS5, MZ6, MZ75, MZ95
Microscope carrier AX 10 447 062 CA CA CA C C C
MZ125, MZ16, MZ16 A
Near vertical illuminator 10 445 198 C C CA 2× (10 446 300) CA (10 446 300) CA (10 446 300) CA (10 446 300)
+ (10 446 393) + (10 446 393)
Attachment for vertical and 10 445 156 C C CA 2× (10 446 300) CA (10 446 300) CA (10 446 300) CA (10 446 300)
oblique observation + (10 446 393) + (10 446 393)
Objective turret for 2
×
and 1×10 447 107 (C) (C) (C) (C) (C) C
planapo objectives
Page 34
Microscope carrier
The microscope carrier can be attached to the focusing drive in
2 positions:
• For short working distances and for
flat objects, use Position 1.
Use this position also in conjunction
with the attachment for vertical and
oblique observation (see detailed instructions).
• Use Position 2 for long working
distances and for bulky objects.
왘 Use an Allen screw to secure the micro-
scope carrier in the position required.
A connection socket for a ∅ 4 mm
grounding cable is provided on the
microscope carrier.
• Different models are available for MS5,
MZ6, MZ7
5, MZ95 and for MZ125, MZ16
and MZ16 A (see p. 18).
• The microscope carrier AX can only be
fitted in position 1 to the focusing drive.
Optics carrier
왘 Gently lower the optics carrier
into the microscope carrier.
왘 Use the screw to secure the optics
carrier in the position required.
Only for MZ7
5:
왘 Remove the screws.
왘 Remove the rotary knobs.
왘 Apply the adhesive scales.
왘 Replace the rotary knobs.
34
Leica M Stereomicroscopes – Assembly
Microscope carrier ➜
drive housing
Microscope carrier AX
Optics carrier ➜
microscope carrier
Apply the adhesive
scale of
magnifications
Page 35
35
Leica M Stereomicroscopes – Assembly
Binocular tube
왘 Release the clamping screw.
• If you have an accessory such as an
ergo module (page 14), a coaxial illuminator (page 47) or a video/phototube
(page 52), fit it now to the optics carrier.
Tighten the clamping screw.
왘 Tilt the binocular tube and insert the
edge of its dovetail ring beneath the
two lugs on the optics carrier.
왘 Move the binocular tube from side to
side until the locating screw on the
optics carrier engages the guide.
왘 Retighten the clamping screw.
Optical accessories
왘 Insert a graticule, if necessary (page 56).
왘 Release the clamping screws on the eye-
pieces.
왘 Insert the eyepieces fully into the eye-
piece tubes. Check that they have seated
correctly.
왘 Tighten the clamping screw.
• You can extend the overall magnification
range by using 10×, 16×, 25× and 40×
wide-eyepieces for persons wearing
glasses.
Hold the objectives during assembly and disassembly to prevent them from falling on the stage plate. This applies particularly to the 2× planapochromatic objective, which is very heavy.
Remove the specimens from the stage plate.
왘 Screw on the selected objective counter-
clockwise.
• Some instrument configurations require spacer rings in order
to secure the objectives (page 32). These rings are fitted and
removed using the tool provided.
• The Leica MZ9
5 is supplied with a spacer ring for the achro-
matic objectives and for the 1× planachromatic objective.
When the spacer ring has been removed by applying the tool
provided, the larger-diameter planachromatic and planapochromatic objectives for the MZ12
5/MZ16 can be used.
Eyepiece
Objective
Page 36
Objective nosepiece
• Suggested for Leica MZ16 and MZ16 A
Please note: When using the objective nosepiece together with MS5, MZ6,
MZ7
5, MZ95 or MZ125 large fields of view at low magnifications are not fully
illuminated.
– Hold objectives during assembly and disassembly to prevent them from
falling on the stage plate. This applies particularly to the 2× planapochro-
matic objective, which is very heavy. Remove the specimens from the
stage plate.
– The adjustable ring nut with the 1× planapochromatic objective is fastened
with 2 Allen screws after the adjustment. Loosen the Allen screws if you
need to remove the objective.
– Attach the limit stop to the stand column. It prevents the 2× objective from
hitting the limit stop when the objective nosepiece is rotating, if the working distance was changed ×while working with the 1 objective.
– Caution: Carefully rotate the objective nosepiece and take care not to
pinch your fingers between column and objective or objective nosepiece.
MZ16 A: When changing to objective 1× or 2×, press the OPT + SEL function
keys simultaneously. The display shows the current total magnification, and
in REF mode it shows the current measurement with objective 1× or 2×.
A 1 or 2 in front of the value indicates the selected objective.
Remove the securing strap from the objective nosepiece:
왘 Remove both screws (at the bottom).
Leica MZ16 and MZ16 A are delivered with a threaded adapter for objectives.
Remove the adapter to use the objective nosepiece.
왘 Invert the optics carrier.
왘 Loosen 3 screws and remove the adapter.
The objective nosepiece features two threads:
– a fixed thread for the 2× planapochromatic objective
– a thread with 2 Allen screws for the 1× planapochromatic objective with
adjustable ring nut. The adjustable ring nut is supplied separately and used
to adjust the parfocality between both objectives.
Invert the objective nosepiece to simplify the assembly of the objectives.
왘 Screw on the adjustable ring nut on the thread of the 1× planapochromatic
objective until the limit stop and tighten it with the enclosed wrench.
왘 Screw in the 1× planapochromatic objective with the ring nut in clockwise
direction on the side with the 2 Allen screws.
• The fine-pitch thread on the ring nut consists of 24 threads.
You should expect at least 40 turns.
The adjustable ring nut must never be set higher than the top surface of the
nosepiece plate to prevent the nosepiece from locking while rotating.
Preparation
Assembling
1× planapochromatic
36
Leica M Stereomicroscopes – Assembly
Page 37
왘 Carefully turn and tighten the 2× planapochromatic objective clockwise to
the limit stop without applying excessive force.
왘 Raise the focusing drive with the drive heads to
provide sufficient space for the 2× planapochro-
matic objective.
왘 Fit the objective nosepiece like a microscope car-
rier with the Allen screw (see page 34, position 1).
왘 Insert the optics carrier in the objective nosepiece.
왘 Retighten the clamping screw.
왘 Attach the limit stop to the column of the stand so
that the working distance beneath the 2× objective
will always measure approx. 15 mm.
• Fit and adjust the 1× and 2× planapochromatic objectives as described.
The image then remains parfocal in the range of < 0.05 mm, and refocusing
after changing the objective is no longer required.
• Use a very fine, flat object (e.g. an object micrometer) for the adjustment,
which allows maximum focusing even at highest resolution.
왘 Screw the 2× planapochromatic objective into the beam path.
왘 Adjusting the diopter settings and parfocality (see p. 20).
왘 Screw the 1× planapochromatic objective into the
beam path.
왘 Observe the same object with smallest magnifica-
tion without changing the settings made with the
2× planapochromatic objective.
왘 Turn the 1× planapochromatic objective counter-
clockwise until the object can be seen in focus
at the smallest magnification.
왘 Slowly zoom to the highest magnification. At
the same time correct the focus by turning the
1× planapochromatic objective.
• Verify that the object is in focus at highest magnification with the
2× planapochromatic as well as the 1× planapochromatic objective
without refocusing. Otherwise turn the objective at the ring nut until
the object is focused.
왘 Fasten the ring nut with both screws.
Do not overtighten both screws.
Assembling
2× planapochromatic
Assembling
objective nosepiece
Adjusting parfocal
37
Leica M Stereomicroscopes – Assembly
Page 38
Transformers
Follow the safety instructions given on page 7.
Leica transformers may only be opened by authorized service
personnel, and the power cable must be disconnected beforehand. The transformers are not to be used outdoors.
Regulating transformer
The regulating transformer 5.3 to 7.5 V/40 VA is used to operate
the 6 V/10 W and 6 V/20 W lamps.
1 Connections for two lamps (maximum combined
loading 40 W)
2 Connection for power cable
3 Fuse holder 2x T 1A L 250 VA
4 Power switch
Ion
0 off
5 ON display: Instrument is switched on.
6 Regulating knob
7 6 V display: The standard voltage has been reached.
Technical data see page 74
Switching the input voltage is not necessary.
The adjustment is carried out automatically by means of the
switching controller in the regulating transformer.
왘 Connect the power cable to the socket of the base and to
the power source.
왘 Connect the lamp. The sockets accept two lamps with
a maximum combined loading of 40 W.
38
Leica M Stereomicroscopes – Illuminations
Starting up
Illuminators
1
1
2
3
4
5
7
6
Page 39
You can prolong the life of your bulb if you:
왘 First switch off the lamp by turning the
rotary knob into the black range
왘 and only then switch the transformer
on or off.
왘 Turn on the power switch.
The diode is illuminated.
왘 Use the rotary knob to adjust the
brightness.
Above 6 V the diode is illuminated.
Fuses 1.0A, 5×20 (stock no. 167 651)
왘 Lamp off.
왘 Power switch off.
왘 Use a flat-bladed screwdriver to press on
the slots in the fuse holders (3) and turn
the fuse holders to the left.
Pull out the fuse holder.
왘 Fit a new fuse and replace the fuse
holder.
왘 Lamp off.
왘 Power switch off.
왘 Wait a few seconds.
왘 Power switch on.
왘 Lamp on.
Step transformer
Follow the safety instructions given on page 7.
• You can attach a 6 V/10 W lamp to the
step transformer.
왘 Set the voltage selector on the rear
side to 115 V or 230 V.
왘 Attach the power cable to the power
supply.
왘 Connect the lamp.
왘 Adjust the brightness with the three-step switch (4/5/6 V).
Switching
on and off
Changing fuses
In the event of
overload
39
Leica M Stereomicroscopes – Illuminations
Page 40
6 V/10 W incident lamp
• The 6 V/10 W lamp is an inclined incident source for
illuminating spatial objects
• By using two lamps, you can soften or eliminate shadows.
• At the nominal voltage (6 V), the color temperature is 2700 K.
왘 Release the clamping screw.
왘 Unfold the lampholder arm.
왘 Retighten the clamping screw.
왘 Use the screw to secure the clamp to
the side-faced column, either above or
below the focusing drive.
왘 Use the connector to attach the lamp-
holder arm to the clamp, on either the
right or the left.
왘 Fit the ∅ 25 mm adapter to the cast foot.
왘 Using the connector, attach the lampholder to the adapter.
왘 Remove the objective.
왘 Slide the adapter over the objective.
왘 Using the connector, attach the lampholder to the adapter.
왘 Unscrew a connector from the lampholder.
왘 Release the clamping screw.
왘 Using the thread, secure the lampholder to the focusing drive.
왘 Retighten the clamping screw.
왘 Attach the lamp to the connector on
the lampholder arm.
왘 Fit the filter holder, complete with KG1
heat-absorbing filter, to one of the pegs.
• A total of 4 filter holders with ∅ 50 mm
filters can be attached.
Assembly
Lampholder ➜
clamp for side-faced
columns
Lampholder ➜
cast foot
Lampholder ➜
objective
Lampholder ➜
inclinable focusing
drive
Lamp housing ➜
lampholder arm
40
Leica M Stereomicroscopes – Illuminations
Page 41
Observe the safety notes on page 7.
Observe the notes with respect to the use of the transformer on page 38.
왘 Connect the cable between the lamp
housing and the transformer (page 38).
왘 Switch on the transformer and use the
rotary knob to adjust the brightness
(page 39).
왘 Hold the lamp housing and release
the clamping screw.
왘 Align the light spot with the object.
왘 Retighten the clamping screw.
왘 Swing in the heat-absorbing filter.
왘 Enlarge or reduce the size of the light
spot by turning the socket of the bulb.
Disconnect the lamp cable from the transformer.
Never touch the bulb when it is hot.
You may sustain burns.
• You can separate the lamp housing and the bulb socket. Line
up the arrow head on the mount with its shaft on the housing.
• Do not touch the 6 V/10 W halogen bulb because finger
marks can cause it to crack when heated. Remove finger
marks with a cloth dipped in alcohol.
왘 Turn the socket to the separation
position.
왘 Pull the socket forcibly out of the housing.
왘 Hold the new bulb in a cloth and push it
into position.
왘 Replace the socket in the housing. The
socket clicks into position.
Operating the lamp
Changing
the bulb
41
Leica M Stereomicroscopes – Illuminations
Page 42
42
Leica M Stereomicroscopes – Illuminations
6 V/20 W incident lamp
• The 6 V/20 W lamp is an inclined incident source for
illuminating spatial objects.
• By using two lamps, you can soften or eliminate shadows.
• At the nominal voltage (6 V), the color temperature is 3200 K,
ideal for photography. Set the regulating transformer to this
nominal voltage (see page 38).
왘 Release the clamping screw.
왘 Unfold the lampholder arm.
왘 Secure the lampholder to the lamp.
왘 Use the screw to secure the clamp to
the side-faced column, either above or
below the focusing drive.
왘 Using a fork wrench and the thread con-
nector, attach the lampholder arm to the
clamp, on either the right or the left.
왘 Position the lamp.
왘 Retighten the clamping screw.
• The thread connector also enables the lampholder
to be connected to the cast foot.
• A total of 4 filter holders with ∅ 32 mm filters can
be attached.
A heat-absorbing filter is built in.
왘 Push the filter holder, complete with
diffusing filter, onto one of the pegs,
and swing it in.
Assembly
Diffusing and
other filters
Page 43
43
Leica M Stereomicroscopes – Illuminations
Observe the safety notes on page 7.
Observe the notes with respect to the use of the
transformer on page 38.
왘 Connect the cable between the lamp housing and the trans-
former (page 38).
왘 Switch on the transformer and use the
rotary knob to adjust the brightness.
왘 Push the condenser lens forwards
or backwards until the slider engages.
왘 Hold the lamp housing and release
the clamping screw.
왘 Align the light spot with the object.
왘 Retighten the clamping screw.
왘 Adjust the size of the light spot by
moving the condenser lens forward
or back.
왘 If necessary, swing in a filter (page 42).
Operating the lamp
Illuminating the object
Page 44
44
Leica M Stereomicroscopes – Illuminations
Disconnect the lamp cable from the transformer.
Never touch the bulb when it is hot.
You may sustain burns.
•
Do not touch the 6 V/20 W halogen bulb directly with your fingers, because finger marks can cause it to crack when heated.
Remove finger marks immediately with a cloth dipped in pure
alcohol.
왘 Press the spring clips together and
pull off the rear part of the housing.
왘 Hold the new bulb in a cloth and push
it into position.
왘 Press the spring clips together and
close the housing again.
왘 Center the bulb.
The 6 V/20 W bulb is a powerful source of illumination. The
more carefully you set it up, the more uniform the lighting will
be. For this reason, recenter a new bulb after fitting it.
왘 Switch on the lamp.
왘 Swing out the diffusing filter.
왘 Pull the condenser lens fully out.
왘 Hold the lamp and release the
clamping screw.
왘 Point the lamp vertically downwards
at a white sheet of paper so that two
filament images are seen.
왘 Retighten the clamping screw.
왘 Using the slotted screw, bring the
two filament images into focus.
왘 Displace the filament images so that
they are opposite to one another, but
in contact.
왘 Swing back the diffusing filter.
Changing the bulb
Centering the bulb
Page 45
45
Leica M Stereomicroscopes – Illuminations
Leica L2 cold-light source
The antistatic Leica L2 cold-light source is powerful, small,
compact, inexpensive and suitable for simple observation tasks
with the Leica MS5 and MZ6 stereo microscopes. In addition to
one or two-arm light guides, corresponding accessories are also available for the coaxial, vertical and transmitted-light illumination methods. The Leica L2 can be directly connected on the
stand.
The light guides can be mounted with arms in the threads on
the microscope carrier. For instructions on mounting the clamp
for fiber-optic light guides, see page 46.
For detailed information, refer to the separate user manual
Leica L2 M2-288-0.
When in use, the Leica L2 fiber-optic light source must always
be locked into an adapter to ensure stability.
왘 Secure the clamp to the 300 mm
focusing drive by tightening the screw.
왘 Using the mounting rail, slide the fiber-
optic light source into the adapter fork
until it engages.
When mounted on the baseplate, the light
source can be used as a stand-alone unit.
왘 Using the mounting rail, slide the fiber-
optic light source into the adapter fork
until it engages.
Adapter ➜
300 mm focusing drive
Adapter ➜
baseplate
Page 46
46
Leica M Stereomicroscopes – Illuminations
Cold light source Leica CLS series
The Leica CLS series is a high-performance line for high light
intensity within the smallest possible space and flicker-free
white light with the lowest possible thermal effect on the objects. The comprehensive line of accessories enables unlimited
use. The CLS series is produced of antistatic material.
When using the ring lamp (∅ 76 mm) on the planachromatic
objective 0.8× (∅ 80 mm), a special adapter (10 447 078) is
required.
For a detailed information, refer to the user manual Leica CLS.
• The clamp of the fiber-optic light guide cannot be
attached to the microscope carrier AX.
왘 Turn the clamping screw out of the clamp.
왘 Hold the clamp in the opening of the
microscope carrier.
왘 Push the clamping screw through the
holes in the microscope carrier and in
the broader part of the clamp, and screw
it finger-tight to the narrow part of the
clamp.
왘 Insert the fiber-optic light guide into the clamp.
왘 Switch on the power unit.
왘 Align the light spot with the object.
왘 Retighten the clamping screw.
Leica LED illumination
The Leica LED1000 (Laser Emitting Diode) illumination is available with ring illuminator and/or spot and suitable for routine
tasks with the Leica MS5, MZ6, MZ7
5, MZ95 stereomicroscopes.
LEDs, which do not develop any heat, are used as illuminators.
The color temperature measures 5000 K (daylight).
For details see the separate instructions for use for the LED
illumination.
Fiber-optic
light guide
Page 47
47
Leica M Stereomicroscopes – Illuminations
Supply (line) lamp 25W
Follow the safety instructions given on
page 7.
왘 Fit the lamp holder and lamp as
described below (incident-light
lamp 6 V/10 W).
왘 Connect the 25 W supply (line)
lamp to the power supply.
왘 Switch on the supply (line) lamp.
왘 Align the light spot with the object
as described.
Coaxial illuminator
• This illuminator is for observing and photographing flat,
highly-reflecting objects such as wafers, integrated circuits
and polished metal sections.
• The coaxial incident light housing fits like an accessory tube
between the optics carrier and the binocular tube, or between
the optics carrier and the phototube (page 50).
• For the MZ7
5 and MZ95, fit the objective
preferably to the spacer ring (10 446 300),
page 32. This will completely illuminate
the largest field of view.
• A quarter-wave plate is required when the microscope
carrier AX is used in the vertical position.
왘 Using the clamping screw, secure the quarter-wave plate to
the objective mount.
왘 Using the knurled ring, turn the quarter-wave plate until the
required effect is obtained.
Please observe the notes on the use of the aperture in the
AX microscope carrier (p. 19).
Page 48
Near-vertical illuminator
• The near-vertical (approx. 5°) light beam illuminates depressions and cavities.
• Shadowing by tools is eliminated.
• This illuminator can only be used with the achromatic objectives having focal lengths of 100, 150, 175 and 200 mm.
• Spacer rings are required for the Leica MZ7
5, MZ95, MZ125
to secure the near-vertical illuminator to the optics carrier
(page 32).
왘 Unscrew the objective.
왘 Release the clamping screw and remove the adapter ring
from the incident-light housing for near-vertical light.
왘 Screw the adapter ring onto the
microscope carrier.
왘 Secure the incident-light housing
to the adapter ring.
왘 First screw the spacer ring(s) (page 32)
onto the microscope carrier, then screw
the adapter ring to the spacer ring.
왘 Secure the incident-light housing to the
adapter ring.
왘 Screw the achromatic objective (see
above) into position.
왘 Release the left or right clamping screw
and change the cover plate accordingly.
For MS5, MZ6:
For Leica MZ7
5,
MZ9
5, MZ125:
48
Leica M Stereomicroscopes – Illuminations
Page 49
49
Leica M Stereomicroscopes – Illuminations
왘 Attach the fiber-optic light guide on
either the left or the right.
To switch on the cold-light illuminator,
refer to the user manual provided with it.
왘 Turn the rotary knob.
• A movable prism directs the light from
the left or right outlet onto the object.
No light?
Page 50
Tubes
• All accessory tubes which fit between the optics carrier and
the binocular tube are fitted in the same manner.
• In the dovetail ring of the optics carrier is a locating screw
which must engage the notch in the accessory (page 35).
This is best accomplished by moving the accessory slightly
from side to side.
왘 Release the clamping screw.
왘 Insert the accessory tube into the dove-
tail ring in the same manner as the binocular tube (page 35) and move it slightly
from side to side until the locating screw
engages the notch.
왘 Retighten the clamping screw.
왘 Fit the binocular tube on the accessory
tube in the same manner.
Double-iris diaphragm
A double-iris diaphragm is built into the MZ16 and MZ16 A. It is
operated by means of a knurled ring. A separate double-iris
diaphragm is available as accessory for the other instruments.
The double-iris diaphragm for MS5–MZ12
5
can be inserted between optics carrier and
binocular tube or video/phototube.
Set the lever to OPEN: The double-iris
diaphragm (aperture diaphragm) is open.
The depth of field increases as the lever
is moved from OPEN to 1. Remember,
however, that
– brightness decreases, so exposure times become longer
– resolution deteriorates.
Assembly
50
Leica M Stereomicroscopes – Accessories
Accessories
Page 51
Drawing tube
• The drawing tube is for both left-handers and right-handers.
Fit the mirror on the left-hand or right-hand side of the optics
carrier.
왘 Fit the drawing tube between optics car-
rier and binocular tube as described on
page 50.
왘 Place a sheet of paper beneath the
mirror.
왘 Use a table lamp to illuminate
the paper.
왘 Move the lever to the circle.
왘 Look into the binocular tube, position
the object, and focus on it.
왘 Move the lever to the black spot.
왘 Look into the binocular tube and balance
the brightness so that the object, the
drawing surface and the pencil are all
seen together.
• In general, the paper needs to be illuminated strongly, but the
object only weakly.
왘 Move the lens mount of the drawing tube forwards or back-
wards until the drawing surface is sharply imaged.
왘 Now you can draw the feature.
• If you place a graduated scale beneath the object and draw
its intervals as well, you can easily determine the image
scale on the paper.
Discussion tube
At the discussion tube two observers see the same erect,
laterally-correct, three-dimensional image.
The assembly and use of the discussion tube are described in
the separate user manual M2-263-0.
Drawing
51
Leica M Stereomicroscopes – Accessories
Page 52
Video/phototubes
52
Leica M Stereomicroscopes – Accessories
1”, 2/3”, 1/2”, 1/3”
C-Mount, CCD cameras
Leica DC cameras
11 541 006
1”, 1x
11 541 007
2/3”, 0.63x
11 541 016
1/2”, 0.5x
10 445 928
1/3”, 0.32x
10 445 929
1/2”, 0.5x
10 446 261
2/3”, 0.63x
10 446 307
0.8x
camera housing
10 446 175
SLR
Adapter
SLR
10 162 226
10 445 541
10 404 207
Leica
MPS30 / MPS60
photoautomats
10 446 120
8x
10 445 304
10x
10 445 305
16x
10 445 932
CCD camera
11 543 703
B-Mount
3-chip 2/3”
B-Mount
3-chip 1/2”
CCD camera
11 543 702
C-Mount
CCD camera
11 543 706
11 541 038
0.55x -1.1x
1”
H
10 445 931
HD50
10 446 197
10 445 930
1x
10 446 121 8x
10 446 131 10x
10 446 132 16x
10 445 924 50%
10 446 229 100%
A
10 445 925
10 445 927
10 446 308
HD F
HD V 10 446 309
Leica MZ16, MZ16 A
Leica MS5, MZ6, MZ75, MZ95,
MZ12
5, MZ FLIII
Page 53
• Video/phototubes are designed to support modular
photomicrography systems, and Leica digital, video, film
or SLR cameras.
• The modular photomicrographic systems and the Leica digital cameras are detailed in a separate user manual, along
with instructions for their assembly and use.
• When you are not taking photographs, engage the observation beam path.
• Accessories such as the coaxial incident illuminator always
fit between the stereomicroscope and the phototube.
Video/phototube A
This tube does not permit stereoscopic observation. The image
is studied either in the camera viewfinder, or down the focusing
telescope of the camera. In the video/photo beam path, 100%
light is available.
Trinocular video/phototube 50%
왘 Fit the trinocular video/phototube on
the optics carrier in place of the
binocular observation tube (page 35).
For examples on camera assembly
see page 54.
• 50% to both eyepieces
• 50% in the video/photo beam path
Before taking the photograph, close off
the right eyepiece to keep out stray light.
왘 Move lever to the left.
Partition of light
Stop
53
Leica M Stereomicroscopes – Accessories
Page 54
Trinocular video/phototube 100%
Fitting: See "Trinocular video/phototube 50%".
왘 Observation: Push lever in.
왘 Photography: Pull out lever to the left.
• 100% in both eyepieces.
• 100% in the left eyepiece
• 100% in the video/photo beam path.
As shown in the setup diagram on page 52, there are various
possibilities for adapting an MPS, video, digital or SLR camera.
Example:
With this equipment you can, for example, attach an MPS
camera (see detailed description in the MPS user manual), an
SLR camera, or even a digital or video camera.
왘 Fit the 1× video/photo objective.
Example:
With this equipment you can, for example, attach a digital
or video camera.
왘 Fit the video objective (2) on a Leica
DC digital camera (3) with the C-mount
connection.
왘 Connect the video objective with the
mounted Leica DC digital camera on
the right output of the video/phototube.
왘 Tighten the coupling ring (1).
Switchover
Light partition
setting "VIS"
Light partition
setting "PHOT"
Camera setup,
variants
54
Leica M Stereomicroscopes – Accessories
Page 55
Video/phototube HD50
왘 Use the video/phototube HD50 between
the optics carrier and the binocular tube
(page 50).
왘 Observation: Push lever in.
왘 Documentation: Pull lever out.
• 50% to both eyepieces
• 50% in the left-hand video/photo beam path
• 50% in the right-hand video/photo beam path
• 100% to left video/photo beam path
• 50% to right eyepiece
• 50% in the right-hand video/photo beam path
As shown in the setup diagram on page 52, there are various
possibilities for adapting an MPS, video, digital or SLR camera.
Example:
왘 Fit the video/photo objective
H on the left-hand side.
With this equipment you can, for example, attach an MPS
camera (see detailed description in the MPS user manual), an
SLR camera, or even a digital or video camera.
Example:
With this equipment you can, for example, attach a digital
or video camera.
왘 Fit the video objective (2) on a
Leica DC digital camera (3) with
the C-mount connection.
왘 Connect the video objective
with the mounted Leica DC digital
camera on the right output of the
video/phototube.
왘 Tighten the coupling ring (1).
Switchover
Light partition
for "observation"
Light partition
for "documentation"
Camera setup, variants
55
Leica M Stereomicroscopes – Accessories
Page 56
Attachment for vertical and oblique observation
• The attachment for vertical and oblique observation enables
spatial objects to be observed from above, and also from all
around at an angle of 45°.
• The microscope carrier must be fitted in the lower
position 1 (page 34).
• For MS5, MZ6: Fit the 1× achromatic objective by screwing
its adapter ring directly into the optics carrier.
• Spacer rings are required for the Leica
MZ7
5, MZ95, MZ125 and MZ16 to secure
the attachment for vertical and oblique
observation to the optics carrier (page 32).
• Only usable with 1× achromatic objec-
tive.
A detailed description can be found in the
user manual M2-266.
Graticules
• The graticules for length measurements and numbering are
fitted in mounts and can be inserted into the eyepieces.
• A special measuring graticule is available for the Leica MZ16
A (see the user manual M2-116).
• A high-precision object micrometer with 50-mm scale,
0.1 mm and 0.01 mm graduation, allows for calibration
corresponding to the selected magnification.
• Preferably measure with the microscope carrier AX in
vertical position. The measurements are more accurate without the convergence angle in the stereoscopic image.
• Graticules show boundary lines for all film formats.
왘 Unscrew the insert at the knurled ring.
왘 Clamp the graticule onto the insert with
a little bit of pressure. Check for correct
seating!
왘 Tighten the insert with graticule.
왘 Insert the eyepiece.
왘 Look into the eyepiece: Align the gratic-
ule by turning the eyepiece in the tube
and tighten the clamping screw.
A detailed description can be found in the
user manual M2-275.
Inserting the
graticule
56
Leica M Stereomicroscopes – Accessories
Page 57
Stages
The ∅ 120 mm stages can be used in those incident and transmitted-light stands which have a ∅ 120 mm port.
The gliding stage can be moved in all directions and
rotated completely.
왘 Place the ∅ 120 mm gliding stage in
the ∅ 120 mm port and secure it with
the eccentric lever.
왘 Insert the ∅ 120 mm glass stage plate or
the black/white stage plate.
• The cup stage can be inclined as required.
• You can secure objects to its rubberized upper
surface with needles.
• The movable holder accepts petri dishes.
왘 Place the ∅ 120 mm
support ring in the
∅ 120 mm port.
왘 Place the cup stage on it.
The Leica MATS thermocontrol system is a heating system for
microscopes and stereomicroscopes. Leica MATS allows the
observation of temperature-sensitive specimens and living cells
in biology, medicine and pharmaceutics under exact temperature conditions.
For details see M2-227-0 instructions for use.
Polarization, transmitted light
The analyzer, in combination with either the rotatable polarization stage or the polarizer on glass stage plate, enables doublerefracting materials to be studied. These can include organic
crystals, mineral grains, thin sections of rock or bone, polymers,
stressed glass, and liquid crystals.
A detailed description can be found
in the user manual M2-277.
Gliding stage
Cup stage
Thermo stages
57
Leica M Stereomicroscopes – Accessories
Page 58
58
Leica M Stereomicroscopes – Notes
Tips and hints: What to do if …
Remedy:
• Set the interpupillary distance correctly (page 15).
• Locate the eyepoint (page 15).
Remedy:
• Fit the eyepieces correctly (page 35).
• Adjust your dioptric settings exactly as described (page 20).
Remedy:
• Adjust the ease of movement (pages 16, 29, 31).
• Is the voltage selector set correctly (bright-field transmitted
light stand, page 24; transformer, page 38)?
• Is the power switch on?
• Is the power cable attached correctly?
• Are all connecting cables attached correctly?
• Are the fuses in order?
Remedy:
• Turn up the regulating knob high enough (bright-field
transmitted light stand, page 24; transformer, page 38).
• Open the double-iris diaphragm of the phototube.
TV, photography
Remedy:
• Adjust the video camera / monitor system in accordance
with the directions of the manufacturer.
•
Refer to the remedies listed above under "The image is too dark."
Remedy:
• Focus precisely (page 16).
• Adjust your dioptric settings exactly as described (page 20).
Remedy:
• Use artificial-light film.
• Turn the regulating knob of the transformer clockwise to the
position of maximum voltage (bright field transmitted-light
stand, page 24; transformer, page 38).
The field of view is
partly shadowed.
The image does not
stay in focus.
The focusing drifts
downwards or can
be moved only with
difficulty.
If an electrical fault
develops, first check
the following:
The image
is too dark.
The image
on the screen
is too dark.
Blurred
photographs.
Color photographs
have a yellow cast.
Notes
Page 59
59
Leica M Stereomicroscopes – Notes
Care, maintenance
We will show you how to look after your microscope and how
to clean it.
You are working with a high-precision, high-performance
instrument.
Accordingly, we guarantee the quality of each of our instruments. The guarantee covers all faults in materials and manufacture. It does not, however, cover damage resulting from
careless or improper handling.
Please handle your valuable optical instrument with care. It will
then fulfill its function with the same precision for decades. Our
instruments are known for that!
If, contrary to expectations, your stereomicroscope develops a fault, please call in a
specialist – contact your local Leica agent
or Leica Microsystems (Switzerland) Ltd,
CH-9435 Heerbrugg.
• From moisture, vapors, acids, alkalis and
corrosive substances, and keep chemicals
away from the instruments.
• From improper handling.
Never dismantle optical systems or
mechanical parts unless instructions for
doing so are given in the user manual.
• From oil and grease.
Do not grease guide surfaces or
mechanical parts.
In this section
We guarantee
the quality.
Protect your
instruments
Page 60
60
Leica M Stereomicroscopes – Notes
Cleaning
Dust and dirt will affect the quality of your results.
왘 Put a dust cover over the instrument
during breaks in work.
왘 Use dust caps to protect
tube openings, tubes without
eyepieces, and eyepieces.
왘 Remove dust with a pneumatic
rubber bulb or with a soft brush.
왘 Clean objectives and eyepieces
with special optic cleaning
cloths and with pure alcohol.
왘 When accessories are not being
used, protect them against dust.
Some components are made of polymer, or are polymer-coated.
They are, therefore, pleasant and convenient to handle. The use
of unsuitable cleaning agents and techniques can damage
polymers, so always observe the following rules:
• Never clean them in an ultrasonic bath. The polymer can
become brittle and later break.
• Never use corrosive cleaning agents or ones containing
acetone.
• Never use solvents for cleaning (except for ethanol and
isopropanol).
• With warm soapy water, wiping down afterwards
with distilled water.
• With ethanol (industrial alcohol) and isopropanol.
When cleaning with ethanol or isopropanol, adhere
to the appropriate safety regulations.
Therefore:
Cleaning polymer
components
Never clean
polymers this way
You can clean
polymers harmlessly
Page 61
61
Leica M Stereomicroscopes – Notes
Calculation
M
O
Magnification of objective
M
E
Magnification of eyepiece
z Magnification changer position
q Tube factor, e.g. 1.5× for coaxial incident light,
45° ErgoTube
TM
1.6×
r Factor 1.25× if the planachromatic and planapochro-
matic objectives of the MZ12
5/MZ16 are used on the
MS5, MZ6, MZ7
5 or MZ95
N
FOV
Field number of eyepiece. The field numbers are printed
on the eyepieces:
10× = 21, 16× = 14, 25× = 9.5, 40× = 6.
M
O
Eyepiece 1×
M
E
25×/9.5 eyepiece
z Zoom position 4
q Tube factor 1.5× (because of coaxial illuminator).
r Factor 1.25×
Magnification down binocular tube:
Diameter of field of view:
1 × 25 × 4 × 1.5 × 1.25 = 187.5 ×
M
TOT VIS
= MO× ME× z × q × r
∅ OF :
N
FOV
MO× z × q × r
9.5
= 1.3 mm
1 × 4 × 1.5 × 1.25
Total magnification
and field of view
diameter
Example
Page 62
62
Leica M Stereomicroscopes User Manual
Optical data of Leica MS5, MZ6
Objectives
Working distance (mm)
Field diameter (mm)
Total magnification
0.63 25.2 9.5 31.5 7.6 50.4 4.8 20.2 11.9 15.8 15.2 7.9 30.4 12.6 19 37.6 6.4
0.8 32 7.5 40 6 64 3.8 25.6 9.4 20 12 10 24 16 15 47.8 5
1 40 6 50 4.8 80 3 32 7.5 25 9.6 12.5 19.2 20 12 59.7 4
1.25 50 4.8 62.5 3.8 100 2.4 40 6 31.3 7.7 15.6 15.4 25 9.6 74.6 3.2
1.6 64 3.8 80 3 128 1.9 51.2 4.7 40 6 20 12 32 7.5 95.5 2.5
2 80 3 100 2.4 160 1.5 64 3.8 50 4.8 25 9.6 40 6 119.4 2
2.5 100 2.4 125 1.9 200 1.2 80 3 62.5 3.8 31.3 7.7 50 4.8 149.3 1.6
3.2 128 1.9 160 1.5 256 0.9 102.4 2.3 80 3 40 6 64 3.8 191 1.3
4 160 1.5 200 1.2 320 0.8 128 1.9 100 2.4 50 4.8 80 3 238.8 1
0.63 15.8 15 19.7 12.1 31.5 7.5 12.6 18.8 9.8 24.2 4.9 48.5 7.9 30.1 23.5 10.1
0.8 20 11.9 25 9.5 40 5.9 16 14.8 12.5 19 6.3 37.7 10 23.8 29.9 7.9
1 25 9.5 31.3 7.6 50 4.8 20 11.9 15.6 15.2 7.8 30.4 12.5 19 37.3 6.4
1.25 31.3 7.6 39.1 6.1 62.5 3.8 25 9.5 19.5 12.2 9.8 24.2 15.6 15.2 46.6 5.1
1.6 40 5.9 50 4.8 80 3 32 7.4 25 9.5 12.5 19 20 11.9 59.7 4
2 50 4.8 62.5 3.8 100 2.4 40 5.9 31.3 7.6 15.6 15.2 25 9.5 74.6 3.2
2.5 62.5 3.8 78.1 3 125 1.9 50 4.8 39.1 6.1 19.5 12.2 31.3 7.6 93.3 2.5
3.2 80 3 100 2.4 160 1.5 64 3.7 50 4.8 25 9.5 40 5.9 119.4 2
4 100 2.4 125 1.9 200 1.2 80 3 62.5 3.8 31.3 7.6 50 4.8 149.3 1.6
0.63 10.1 22.2 12.6 17.8 20.2 11.1 8.1 27.7 6.3 35.6 3.2 70 5 44.8 15 14.9
0.8 12.8 17.5 16 14 25.6 8.8 10.2 22 8 28 4 56 6.4 35 19.1 11.7
1 16 14 20 11.2 32 7 12.8 17.5 10 22.4 5 44.8 8 28 23.9 9.4
1.25 20 11.2 25 9 40 5.6 16 14 12.5 17.9 6.3 35.6 10 22.4 29.9 7.5
1.6 25.6 8.8 32 7 51.2 4.4 20.5 10.9 16 14 8 28 12.8 17.5 38.2 5.9
2 32 7 40 5.6 64 3.5 25.6 8.8 20 11.2 10 22.4 16 14 47.8 4.7
2.5 40 5.6 50 4.5 80 2.8 32 7 25 9 12.5 17.9 20 11.2 59.7 3.8
3.2 51.2 4.4 64 3.5 102.4 2.2 41 5.5 32 7 16 14 25.6 8.8 76.4 2.9
4 64 3.5 80 2.8 128 1.8 51.2 4.4 40 5.6 20 11.2 32 7 95.5 2.3
0.63 6.3 33.3 7.9 26.6 12.6 16.7 5 42 3.9 53.8 2 105 3.2 65.6 9.4 22.3
0.8 8 26.3 10 21 16 13.1 6.4 32.8 5 42 2.5 84 4 52.5 11.9 17.6
1 10 21 12.5 16.8 20 10.5 8 26.3 6.3 33.3 3.1 67.7 5 42 14.9 14.1
1.25 12.5 16.8 15.6 13.5 25 8.4 10 21 7.8 26.9 3.9 53.8 6.3 33.3 18.7 11.2
1.6 16 13.1 20 10.5 32 6.6 12.8 16.4 10 21 5 42 8 26.3 23.9 8.8
2 20 10.5 25 8.4 40 5.3 16 13.1 12.5 16.8 6.3 33.3 10 21 29.9 7
2.5 25 8.4 31.3 6.7 50 4.2 20 10.5 15.6 13.5 7.8 26.9 12.5 16.8 37.3 5.6
3.2 32 6.6 40 5.3 64 3.3 25.6 8.2 20 10.5 10 21 16 13.1 47.8 4.4
4 40 5.3 50 4.2 80 2.6 32 6.6 25 8.4 12.5 16.8 20 10.5 59.7 3.5
10×/21B
16×/14B
25×/9.5B
40×/6B
Eyepieces
Total magnification
Field diameter (mm)
Total magnification
Field diameter (mm)
Total magnification
Field diameter (mm)
Total magnification
Field diameter (mm)
Total magnification
Field diameter (mm)
Total magnification
Field diameter (mm)
Total magnification
Field diameter (mm)
1× Plan
1× Achromat
0.8× Plan*
81 Plan
89 Achromat
112 Plan
55 Planapo 19 Planapo
27 Achromat
97 Planapo
112 Achromat
135 Plan
149 Achromat
297 Achromat 187 Achromat 49 Achromat
1× Planapo*
1.6× Planapo*
2× Achromat
0.63× Planapo*
0.8× Achromat
0.5× Plan*
0.63× Achromat
0.32× Achromat
0.5× Achromat 1.5× Achromat
Magnification changer position
MS5: Positions 0.63, 1, 1.6, 2.5, 4
* When using the planachromatic and planapochromatic objectives MZ12
5, the magnification is increased
by the factor 1.25×.
Page 63
63
Leica M Stereomicroscopes User Manual
Objectives
Eyepieces
10×/21B
16×/14B
25×/9.5B
40×/6B
Ergo objective
0.4×–0.63×
Working distance (mm)
63.5 mm 153.5 mm
Total magnification
Field diameter (mm)
Magnification changer position
0.63 4 52.5 2.6 80.8
0.8 5 41.2 3.3 63.6
1 6.4 32.8 4 51.2
1.25 8 26.3 5 41.2
1.6 10.2 20.6 6.6 31.8
2 12.7 16.5 8.2 25.6
2.5 15.9 13.2 10.3 20.4
3.2 20.4 10.3 13.2 15.9
4 25.5 8.2 16.5 12.7
0.63 6.4 35 4 54.6
0.8 8.2 27.3 5.3 42.3
1 10.2 22 6.6 33.9
1.25 12.7 17.6 8.2 27.3
1.6 16.3 13.7 10.5 21.3
2 20.4 11 13.2 17
2.5 25.5 8.8 16.5 13.6
3.2 32.6 6.9 21 10.6
4 40.8 5.5 26.3 8.5
0.63 10 23.8 6.5 36.5
0.8 12.7 18.7 8.2 29
1 15.9 14.9 10.3 23
1.25 19.9 11.9 12.9 18.4
1.6 25.5 9.3 16.5 14.4
2 31.8 7.5 20.6 11.5
2.5 39.8 6 25.7 9.2
3.2 51 4.7 32.9 7.2
4 63.7 3.7 41.2 5.8
0.63 16 14.9 10.4 23
0.8 20.4 11.8 13.2 18.2
1 25.5 9.4 16.5 14.5
1.25 31.8 7.5 20.6 11.7
1.6 40.8 5.9 26.3 9
2 51 4.7 32.9 7.3
2.5 63.7 3.8 41.2 5.8
3.2 81.5 2.9 52.7 4.6
4 101.9 2.4 65.8 3.6
Total magnification
Field diameter (mm)
Page 64
64
Leica M Stereomicroscopes User Manual
Optical data of Leica MZ75, MZ95
Objectives
40×/6B
0.63 25.2 9.5 31.5 7.6 50.4 4.8 20.2 11.9 15.8 15.2 7.9 30.4 12.6 19 37.6 6.4
0.8 32 7.5 40 6 64 3.8 25.6 9.4 20 12 10 24 16 15 47.8 5
1 40 6 50 4.8 80 3 32 7.5 25 9.6 12.5 19.2 20 12 59.7 4
1.25 50 4.8 62.5 3.8 100 2.4 40 6 31.3 7.7 15.6 15.4 25 9.6 74.6 3.2
1.6 64 3.8 80 3 128 1.9 51.2 4.7 40 6 20 12 32 7.5 95.5 2.5
2 80 3 100 2.4 160 1.5 64 3.8 50 4.8 25 9.6 40 6 119.4 2
2.5 100 2.4 125 1.9 200 1.2 80 3 62.5 3.8 31.3 7.7 50 4.8 149.3 1.6
3.2 128 1.9 160 1.5 256 0.9 102.4 2.3 80 3 40 6 64 3.8 191 1.3
4 160 1.5 200 1.2 320 0.8 128 1.9 100 2.4 50 4.8 80 3 238.8 1
5 200 1.2 250 1 400 0.6 160 1.5 125 1.9 62.5 3.8 100 2.4 298.5 0.8
6* 240 1 300 0.8 480 0.5 192 1.3 150 1.6 75 3.2 120 2 358.2 0.7
0.63 15.8 15 19.7 12.1 31.5 7.5 12.6 18.8 9.8 24.2 4.9 48.5 7.9 30.1 23.5 10.1
0.8 20 11.9 25 9.5 40 5.9 16 14.8 12.5 19 6.3 37.7 10 23.8 29.9 7.9
1 25 9.5 31.3 7.6 50 4.8 20 11.9 15.6 15.2 7.8 30.4 12.5 19 37.3 6.4
1.25 31.3 7.6 39.1 6.1 62.5 3.8 25 9.5 19.5 12.2 9.8 24.2 15.6 15.2 46.6 5.1
1.6 40 5.9 50 4.8 80 3 32 7.4 25 9.5 12.5 19 20 11.9 59.7 4
2 50 4.8 62.5 3.8 100 2.4 40 5.9 31.3 7.6 15.6 15.2 25 9.5 74.6 3.2
2.5 62.5 3.8 78.1 3 125 1.9 50 4.8 39.1 6.1 19.5 12.2 31.3 7.6 93.3 2.5
3.2 80 3 100 2.4 160 1.5 64 3.7 50 4.8 25 9.5 40 5.9 119.4 2
4 100 2.4 125 1.9 200 1.2 80 3 62.5 3.8 31.3 7.6 50 4.8 149.3 1.6
5 125 1.9 156.3 1.5 250 1 100 2.4 78.1 3 39.1 6.1 62.5 3.8 186.6 1.3
6* 150 1.6 187.5 1.3 300 0.8 120 2 93.8 2.5 46.9 5.1 75 3.2 223.9 1.1
0.63 10.1 22.2 12.6 17.8 20.2 11.1 8.1 27.7 6.3 35.6 3.2 70 5 44.8 15 14.9
0.8 12.8 17.5 16 14 25.6 8.8 10.2 22 8 28 4 56 6.4 35 19.1 11.7
1 16 14 20 11.2 32 7 12.8 17.5 10 22.4 5 44.8 8 28 23.9 9.4
1.25 20 11.2 25 9 40 5.6 16 14 12.5 17.9 6.3 35.6 10 22.4 29.9 7.5
1.6 25.6 8.8 32 7 51.2 4.4 20.5 10.9 16 14 8 28 12.8 17.5 38.2 5.9
2 32 7 40 5.6 64 3.5 25.6 8.8 20 11.2 10 22.4 16 14 47.8 4.7
2.5 40 5.6 50 4.5 80 2.8 32 7 25 9 12.5 17.9 20 11.2 59.7 3.8
3.2 51.2 4.4 64 3.5 102.4 2.2 41 5.5 32 7 16 14 25.6 8.8 76.4 2.9
4 64 3.5 80 2.8 128 1.8 51.2 4.4 40 5.6 20 11.2 32 7 95.5 2.3
5 80 2.8 100 2.2 160 1.4 64 3.5 50 4.5 25 9 40 5.6 119.4 1.9
6* 96 2.3 120 1.9 192 1.2 76.8 2.9 60 3.7 30 7.5 48 4.7 143.3 1.6
0.63 6.3 33.3 7.9 26.6 12.6 16.7 5 42 3.9 53.8 2 105 3.2 65.6 9.4 22.3
0.8 8 26.3 10 21 16 13.1 6.4 32.8 5 42 2.5 84 4 52.5 11.9 17.6
1 10 21 12.5 16.8 20 10.5 8 26.3 6.3 33.3 3.1 67.7 5 42 14.9 14.1
1.25 12.5 16.8 15.6 13.5 25 8.4 10 21 7.8 26.9 3.9 53.8 6.3 33.3 18.7 11.2
1.6 16 13.1 20 10.5 32 6.6 12.8 16.4 10 21 5 42 8 26.3 23.9 8.8
2 20 10.5 25 8.4 40 5.3 16 13.1 12.5 16.8 6.3 33.3 10 21 29.9 7
2.5 25 8.4 31.3 6.7 50 4.2 20 10.5 15.6 13.5 7.8 26.9 12.5 16.8 37.3 5.6
3.2 32 6.6 40 5.3 64 3.3 25.6 8.2 20 10.5 10 21 16 13.1 47.8 4.4
4 40 5.3 50 4.2 80 2.6 32 6.6 25 8.4 12.5 16.8 20 10.5 59.7 3.5
5 50 4.2 62.5 3.4 100 2.1 40 5.3 31.3 6.7 15.6 13.5 25 8.4 74.6 2.8
6* 60 3.5 75 2.8 120 1.8 48 4.4 37.5 5.6 18.8 11.2 30 7 89.6 2.3
Working distance (mm)
10×/21B
Eyepieces
16×/14B
25×/9.5B
Total magnification
Field diameter (mm)
Total magnification
Field diameter (mm)
Total magnification
field diameter(mm)
Total magnification
Field diameter (mm)
Total magnification
Field diameter (mm)
Total magnification
Field diameter (mm)
Total magnification
Field diameter (mm)
Total magnification
Field diameter (mm)
1× Plan
1× Achromat
0.8× Plan**
81 Plan
89 Achromat
112 Plan
55 Planapo 19 Planapo
27 Achromat
97 Planapo
112 Achromat
135 Plan
149 Achromat
297 Achromat 187 Achromat 49 Achromat
1× Planapo**
1.6× Planapo**
2× Achromat
0.63× Planapo
**
0
.8× Achromat
0.5× Plan**
0.63× Achromat
0.32× Achromat 0.5× Achromat 1.5× Achromat
Magnification changer position
* Position 6 for MZ95 only
** When using the planachromatic and planapochromatic objectives MZ12
5, the magnification is increased
by the factor 1.25×.
Page 65
65
Leica M Stereomicroscopes User Manual
Objectives
Eyepieces
10×/21B
16×/14B
25×/9.5B
40×/6B
Ergo objective
0.4×–0.63×
Working distance (mm)
63.5 mm 153.5mm
Total magnification
Field diameter (mm)
Magnification changer position
0.63 4 52.5 2.6 80.8
0.8 5 41.2 3.3 63.6
1 6.4 32.8 4 51.2
1.25 8.0 26.3 5 41.2
1.6 10.2 20.6 6.6 31.8
2 12.7 16.5 8.2 25.6
2.5 15.9 13.2 10.3 20.4
3.2 20.4 10.3 13.2 15.9
4 25.5 8.2 16.5 12.7
5 31.8 6.6 20.6 10.2
6* 38.2 5.5 24.7 8.5
0.63 6.4 35 4 54.6
0.8 8.2 27.3 5.3 42.3
1 10.2 22 6.6 33.9
1.25 12.7 17.6 8.2 27.3
1.6 16.3 13.7 10.5 21.3
2 20.4 11 13.2 17
2.5 25.5 8.8 16.5 13.6
3.2 32.6 6.9 21 10.6
4 40.8 5.5 26.3 8.5
5 51 4.4 32.9 6.8
6* 61 3.7 39.5 5.7
0.63 10 23.8 6.5 36.5
0.8 12.7 18.7 8.2 29
1 15.9 14.9 10.3 23
1.25 19.9 11.9 12.9 18.4
1.6 25.5 9.3 16.5 14.4
2 31.8 7.5 20.6 11.5
2.5 39.8 6 25.7 9.2
3.2 51 4.7 32.9 7.2
4 63.7 3.7 41.2 5.8
5 79.6 3 51.4 4.6
6* 95.5 2.5 61.7 3.8
0.63 16 14.9 10.4 23
0.8 20.4 11.8 13.2 18.2
1 25.5 9.4 16.5 14.5
1.25 31.8 7.5 20.6 11.7
1.6 40.8 5.9 26.3 9
2 51 4.7 32.9 7.3
2.5 63.7 3.8 41.2 5.8
3.2 81.5 2.9 52.7 4.6
4 101.9 2.4 65.8 3.6
5 127.4 1.9 82.3 2.9
6* 152.9 1.6 98.8 2.4
Total magnification
Field diameter (mm)
Page 66
66
Leica M Stereomicroscopes User Manual
Optical data of Leica MZ125, MZ16, MZ16 A
Eyepieces
Working distance (mm)
Objectives
0.71 28.4 8.4 14.2 16.9 17.9 13.4 22.7 10.5 45.4 5.3 56.8 4.2
0.8 32 7.5 16 15 20.5 11.7 25.6 9.4 51.2 4.7 64 3.8
1 40 6 20 12 25.6 9.4 32 7.5 64 3.8 80 3
1.25 50 4.8 25 9.6 32 7.5 40 6 80 3 100 2.4
1.6 64 3.8 32 7.5 41 5.9 51.2 4.7 102.4 2.3 128 1.9
2 80 3 40 6 51.2 4.7 64 3.8 128 1.9 160 1.5
2.5 100 2.4 50 4.8 64 3.8 80 3 160 1.5 200 1.2
3.2 128 1.9 64 3.8 81.9 2.9 102.4 2.3 204.8 1.2 256 0.9
4 160 1.5 80 3 102.4 2.3 128 1.9 256 0.9 320 0.8
5 200 1.2 100 2.4 128 1.9 160 1.5 320 0.8 400 0.6
6.3 252 1 126 1.9 161.3 1.5 201.6 1.2 403.2 0.6 504 0.5
8 320 0.8 160 1.5 204.8 1.2 256 0.9 512 0.5 640 0.4
10 400 0.6 200 1.2 256 0.9 320 0.8 640 0.4 800 0.3
11.5 460 0.5 230 1 289.8 0.8 368 0.6 736 0.3 920 0.3
0.71 17.7 13.4 8.9 26.8 11.1 21.2 14.2 16.7 28.3 8.4 35.4 6.7
0.8 20 11.9 10 23.8 12.8 18.6 16 14.8 32 7.4 40 5.9
1 25 9.5 12.5 19 16 14.8 20 11.9 40 5.9 50 4.8
1.25 31.3 7.6 15.6 15.2 20 11.9 25 9.5 50 4.8 62.5 3.8
1.6 40 5.9 20 11.9 25.6 9.3 32 7.4 64 3.7 80 3
2 50 4.8 25 9.5 32 7.4 40 5.9 80 3 100 2.4
2.5 62.5 3.8 31.3 7.6 40 5.9 50 4.8 100 2.4 125 1.9
3.2 80 3 40 5.9 51.2 4.6 64 3.7 128 1.9 160 1.5
4 100 2.4 50 4.8 64 3.7 80 3 160 1.5 200 1.2
5 125 1.9 62.5 3.8 80 3 100 2.4 200 1.2 250 1
6.3 157.5 1.5 78.8 3 100.8 2.4 126 1.9 252 0.9 315 0.8
8 200 1.2 100 2.4 128 1.9 160 1.5 320 0.7 400 0.6
10 250 1 125 1.9 160 1.5 200 1.2 400 0.6 500 0.5
11.5 287.5 0.8 143.8 1.7 181.1 1.3 230 1 460 0.5 575 0.4
0.71 11.4 19.7 5.7 39.4 7.2 31.3 9.1 24.6 18.2 12.3 22.8 9.8
0.8 12.8 17.5 6.4 35 8.2 27.3 10.2 22 20.5 10.9 25.6 8.8
1 16 14 8 28 10.2 22 12.8 17.5 25.6 8.8 32 7
1.25 20 11.2 10 22.4 12.8 17.5 16 14 32 7 40 5.6
1.6 25.6 8.8 12.8 17.5 16.4 13.7 20.5 10.9 41 5.5 51.2 4.4
2 32 7 16 14 20.5 10.9 25.6 8.8 51.2 4.4 64 3.5
2.5 40 5.6 20 11.2 25.6 8.8 32 7 64 3.5 80 2.8
3.2 51.2 4.4 25.6 8.8 32.8 6.8 41 5.5 81.9 2.7 102.4 2.2
4 64 3.5 32 7 41 5.5 51.2 4.4 102.4 2.2 128 1.8
5 80 2.8 40 5.6 51.2 4.4 64 3.5 128 1.8 160 1.4
6.3 100.8 2.2 50.4 4.4 64.5 3.5 80.6 2.8 161.3 1.4 201.6 1.1
8 128 1.8 64 3.5 81.9 2.7 102.4 2.2 204.8 1.1 256 0.9
10 160 1.4 80 2.8 102.4 2.2 128 1.8 256 0.9 320 0.7
11.5 184 1.2 92 2.4 115.9 1.9 147.2 1.5 294.4 0.8 368 0.6
0.71 7.1 29.6 3.5 59.1 4.5 47 5.7 37 11.4 18.5 14.2 14.8
0.8 8 26.3 4 52.5 5.1 41.2 6.4 32.8 12.8 16.4 16 13.1
1 10 21 5 42 6.4 32.8 8 26.3 16 13.1 20 10.5
1.25 12.5 16.8 6.3 33.3 8 26.3 10 21 20 10.5 25 8.4
1.6 16 13.1 8 26.3 10.2 20.6 12.8 16.4 25.6 8.2 32 6.6
2 20 10.5 10 21 12.8 16.4 16 13.1 32 6.6 40 5.3
2.5 25 8.4 12.5 16.8 16 13.1 20 10.5 40 5.3 50 4.2
3.2 32 6.6 16 13.1 20.5 10.2 25.6 8.2 51.2 4.1 64 3.3
4 40 5.3 20 10.5 25.6 8.2 32 6.6 64 3.3 80 2.6
5 50 4.2 25 8.4 32 6.6 40 5.3 80 2.6 100 2.1
6.3 63 3.3 31.5 6.7 40.3 5.2 50.4 4.2 100.8 2.1 126 1.7
8 80 2.6 40 5.3 51.2 4.1 64 3.3 128 1.6 160 1.3
10 100 2.1 50 4.2 64 3.3 80 2.6 160 1.3 200 1.1
11.5 115 1.8 57.5 3.7 72.5 2.9 92 2.2 184 1.1 230 0.9
10×/21B
16×/14B
25×/9.5B
40×/6B
Total magnification
Field diameter (mm)
Total magnification
Field diameter (mm)
Total magnification
Field diameter (mm)
Total magnification
Field diameter (mm)
Total magnification
Field diameter (mm)
Total magnification
Field diameter (mm)
1× Plan
1× Planapo
60 Plan
55 Planapo
135 Plan 97 Planapo 112 Plan 19 Planapo
0.5× Plan 0.63× Planapo 0.8× Plan 1.6× Planapo
15 Planapo
2× Planapo
Magnification changer position
* Zoom positions 0.71 and 11.5 only for MZ16/MZ16 A
Page 67
67
Leica M Stereomicroscopes User Manual
Dimensions of Leica MS5
with incident-light stand with transmitted-light stand
Additional dimensional diagrams involving Leica ErgoModule™ are available from your Leica agency.
Measurements in mm
1× Achromat
1× Achromat
1.0x Achromat
MS5
MS5
Page 68
68
Leica M Stereomicroscopes User Manual
Dimensions of Leica MZ6
with incident-light stand with transmitted-light stand
Additional dimensional diagrams involving Leica ErgoModule™ are available from your Leica agency.
MZ6
MZ6
1.0x Achromat
Measurements in mm
1× Achromat
1× Achromat
Page 69
69
Leica M Stereomicroscopes User Manual
Dimensions of Leica MZ75
with incident-light stand with transmitted-light stand
Additional dimensional diagrams involving Leica ErgoModule™ are available from your Leica agency.
1.0x Plan
1.0x Plan
MZ7
5
MZ7
5
Measurements in mm
1× Plan
1× Plan
Page 70
70
Leica M Stereomicroscopes User Manual
Dimensions of Leica MZ95
with incident-light stand with transmitted-light stand
Additional dimensional diagrams involving Leica ErgoModule™ are available from your Leica agency.
1.0x Plan
1.0x Plan
MZ9
5
MZ9
5
Measurements in mm
1× Plan
1× Plan
Page 71
71
Leica M Stereomicroscopes User Manual
Dimensions of Leica MZ125
with incident-light stand with transmitted-light stand
Additional dimensional diagrams involving Leica ErgoModule™ are available from your Leica agency.
1.0x Plan
1.0x Plan
MZ12
5
MZ125
Measurements in mm
1× Plan
1× Plan
Page 72
1x Planapo
1x Planapo
MZ16
MZ16
72
Leica M Stereomicroscopes User Manual
Dimensions of Leica MZ16
with incident-light stand with transmitted-light stand
Additional dimensional diagrams involving Leica ErgoModule™ are available from your Leica agency.
Measurements in mm
Page 73
73
Leica M Stereomicroscopes User Manual
Additional dimensional diagrams involving Leica ErgoModule™ are available from your Leica agency.
Dimensions of Leica MZ16 A
with incident-light stand with transmitted-light stand
Measurements in mm
Page 74
74
Leica M Stereomicroscopes User Manual
Type description Transmitted light base 20 W
Power supply ES 635 474 incl. potentiometer
Type of bulb Halogen bulb 6 V/20 W
Socket
Connection for one external incident illumination with a maximum combined loading of 20 W
Operating voltage Primary voltage: 115 /-230 V, 50/60 Hz
Secondary voltage: 7 V 28 VA
Fuses, primary For 115 V: 315 m AT / for 230 V: 160 m AT
Switch positions Position I: Transmitted light 6 V/20 W
Position II: External incident lamp 20 W
Operating environmental
conditions:
– Ambient temperature + 10° C ... + 35° C
– Relative humidity Ambient temperature up to 35° C: 75%
– Atmospheric pressure 700 ... 1060 hPa
Transport and storage:
– Temperature –20° C ... + 52° C
– Relative humidity 10 ... 95 % (non condensing)
– Atmospheric pressure 500 ... 1200 hPa
Protection class Class II
Symbols Insulation, Protection class II
Safety transformer, protection class III
SEV mark of conformity, reference number OG 2
Transmitted-light base 20 W – Technical Data
Technical data electronic devices
Model code Transformer MTR38
Outlet 2× Connection
for an external incident illuminator up to 20 W
Operating voltage Primary: 100–240 VAC, 47–63Hz, 1.8 A
Secondary: 5.3 V DC–7.5V/40 VA
Primary fuse: 2× T 1A L 250 V
Ambient conditions
during operation:
– Ambient temperatures + 10° C ... + 35° C
– Rel. humidity Up to 35° C ambient temperature: 75%
– Atmospheric pressure 700 ... 1060 hPa
Transport and storage:
– Temperature –20° C ... + 52° C
– Rel. humidity 10 ... 95 % (non-condensing)
– Atmospheric pressure 500 ... 1200 hPa
Protection class IP 30 according to EN 60529/IEC 529
Symbols
Regulating transformer – Technichal data
Page 75
Page 76
Leica Microsystems – the brand
Illustrations, descriptions and technical data are not binding and may be changed without notice.
M2-105-0en • © Leica Microsystems (Switzerland) Ltd • CH-9435 Heerbrugg, 2002 • Printed in Switzerland – II.2005 – RDV
Leica Microsystems (Switzerland) Ltd
Stereo & Macroscope Systems
CH-9435 Heerbrugg
Telephone +41 71 726 33 33
Fax +41 71 726 33 99
www.leica-microsystems.com
www.stereomicroscopy.com
for outstanding products
Leica Microsystems’ mission is to be the world’s first-choice provider of innovative
solutions to our customers’ needs for vision, measurement, lithography and analysis
of microstructures.
Leica, the leading brand for microscopes and scientific instruments, developed from
five brand names, all with a long tradition: Wild, Leitz, Reichert, Jung and Cambridge
Instruments. Yet Leica symbolizes innovation as well as tradition.
Leica Microsystems – an international company
with a strong network of customer services
Australia: Gladesville, NSW Tel. +1 800 625 286 Fax +61 2 9817 8358
Austria: Vienna Tel. +43 1 486 80 50 0 Fax +43 1 486 80 50 30
Canada: Richmond Hill/Ontario Tel. +1 905 762 20 00 Fax +1 905 762 89 37
China: Hong Kong Tel. +8522 564 6699 Fax +8522 564 4163
Denmark: Herlev Tel . +45 44 5401 01 Fax +45 44 5401 11
France: Rueil-Malmaison
Cédex Tel. +33 1 4732 8585 Fax +33 1 4732 8586
Germany: Bensheim Tel. +49 6251 1360 Fax +49 6251 136 155
Italy: Milan Tel. +39 02 57 486 1 Fax +39 02 5740 3273
Japan: Tokyo Tel . +81 3 543 596 09 Fax +81 3 543 596 15
Korea: Seoul Tel. +82 2 514 6543 Fax +82 2 514 6548
Netherlands: Rijswijk Tel. +31 70 41 32 130 Fax +31 70 41 32 109
Portugal: Lisbon Tel. +35 1 213 814 766 Fax +35 1 213 854 668
Singapore: Tel. +65 6 77 97 823 Fax +65 6 77 30 628
Spain: Barcelona Tel. +34 93 494 9530 Fax +34 93 494 9532
Sweden: Sollentuna Tel . +46 8 625 45 45 Fax +46 8 625 45 10
Switzerland: Glattbrugg Tel. +41 44 809 34 34 Fax +41 44 809 34 44
United Kingdom: Milton Keynes Tel . +44 1908 246 246 Fax +44 1908 609 992
USA: Bannockburn/Illinois Tel. +1 800 248 0123 Fax +1 847 405 0164
and representatives of Leica Microsystems
in more than 100 countries.
The companies of the Leica Microsystems
Group operate internationally in four business
segments, where we rank with the market
leaders.
●
Microscopy Systems
Our expertise in microscopy is the basis for all
our solutions for visualization, measurement
and analysis of microstructures in life sciences
and industry. With confocal laser technology
and image analysis systems, we provide threedimensional viewing facilities and offer new
solutions for cytogenetics, pathology and materials sciences.
●
Specimen Preparation
We provide comprehensive systems and services for clinical histo- and cytopathology
applications, biomedical research and industrial quality assurance. Our product range
includes instruments, systems and consumables for tissue infiltration and embedding,
microtomes and cryostats as well as automated stainers and coverslippers.
●
Medical Equipment
Innovative technologies in our surgical microscopes offer new therapeutic approaches in
microsurgery.
●
Semiconductor Equipment
Our automated, leading-edge measurement and
inspection systems and our E-beam lithography
systems make us the first choice supplier for
semiconductor manufacturers all over the world.
In accordance with the ISO 9001 certificate, Leica Microsystems (Switzerland) Ltd,
Business Unit Stereo & Macroscope Systems has at its disposal a management system
that meets the requirements of the international standard for quality management. In
addition, production meets the requirements of the international standard ISO 14001 for
environmental management.
Loading...