Leica LMT260 XY User Manual
Leica LMT260 XY
Scanning Stage
User Manual
Contents
General Notes
General Notes 4
Important Safety Notes 5
Symbols Used 6
Safety Instructions 7
Introduction
Congratulations! 11
Standard Delivery and Optional Accessories 12
Overview of the Instrument 13
Assembly
Leica LMT260 XY Scanning Stage with Leica TL5000 Ergo 17
Glass Stage Plate and Adapters 17
Leica LMT260 XY Scanning Stage 18
Adjusting the Illumination of the Leica TL5000 Ergo Focal Plane 19
Leica LMT260 XY Scanning Stage with Leica TL4000 Series
(BFDF, RC, RCI) 20
Glass Stage Plate and Adapters 20
Leica LMT260 XY Scanning Stage 21
Installation
Cables and Terminals 23
Instrument Setup
Leica LMT260 XY Scanning Stage 25
Starting the Leica LMT260 XY Scanning Stage 25
Operating the Leica LMT260 XY Scanning Stage 28
Service
Care, Maintenance, Contact People 33
Spare Parts 35
Specifications
Technical Data 37
Dimensional Drawings 39
Leica LMT260 XY Scanning Stage 39
HydraDT Control Unit 40
CAN Handwheel 41
Leica LMT260 XY Scanning Stage User Manual
General Notes
Leica LMT260 XY Scanning Stage User Manual General Notes 3
General Notes
Safety concept
Before using your Leica LMT260 XY scanning
stage for the first time, please read the "Safety
Concept" brochure, as well as the user manuals
available on the DVD, both included with your
instrument. They contain additional information on handling and care.
Cleaning
O Do not use any unsuitable cleaning agents,
chemicals or techniques for cleaning.
O Never use chemicals to clean colored
surfaces or accessories with rubberized
parts. This could damage the surfaces,
and products could be contaminated by
abraded particles.
O In most cases, Leica Microsystems can
provide special solutions on request. Some
products can be modified, and we can offer
special accessories for use in clean rooms.
Servicing
O Repairs may only be carried out by Leica
Microsystems trained service technicians.
Only original Leica Microsystems spare
parts may be used.
Responsibilities of the person in charge of
the instrument
O Please ensure that the Leica product is
operated, maintained and repaired by
authorized and trained personnel only.
Leica LMT260 XY Scanning Stage User Manual General Notes 4
Important Safety Notes
User manual
The Leica LMT260 XY scanning stage can be
set up in a variety of ways in the Leica product
range. You can find information on individual
system components on the DVD together
with all relevant user manuals in additional
languages. Please keep this DVD in a safe place,
where it is available to all users.
This user manual describes the special functions
of the Leica LMT260 XY scanning stage and
contains important instructions for its operational safety, maintenance, and accessories.
The "Safety Concept" booklet and the user
manuals available on the DVD contain additional safety information regarding the service
work, requirements and the handling of the
Leica LMT260 XY scanning stage, accessories
and electrical accessories as well as general
safety instructions.
You can combine individual system articles
with articles from external suppliers (e.g. cold
light sources, etc.). Please consult the supplier's
user manual and the safety instructions.
Before installing, operating or using the instruments, read the user manuals listed above. In
particular, please follow all safety instructions.
To maintain the unit in its original condition
and to ensure safer operation, the user must
follow the instructions and warnings contained
in these user manuals.
Leica LMT260 XY Scanning Stage User Manual General Notes 5
Symbols Used
Warning! Safety hazard!
This symbol indicates especially important information that is mandatory to
read and observe.
Failure to comply can cause the following:
O Hazards to personnel
O Functional disturbances or damaged in-
struments
Warning of hazardous electrical voltage
This symbol indicates especially important information that is mandatory to
read and observe.
Failure to comply can cause the following:
O Hazards to personnel
O Functional disturbances or damaged in-
struments
Danger due to hot surface
This symbol warns against touching hot
surfaces, e.g. those of light bulbs.
Important information
This symbol indicates additional information or explanations that are intended
to provide clarity.
Leica LMT260 XY Scanning Stage User Manual General Notes 6
Safety Instructions
Description
O The individual modules fulfill the highest
requirements for observation and documentation with the Leica LMT260 XY scanning stage.
Intended use
O See "Safety Concept" booklet and the user
manuals available on the DVD.
Non-intended use
O See "Safety Concept" booklet and the user
manuals available on the DVD.
Neither the Leica LMT260 XY scanning stage
nor its components may be used for surgical
procedures, since they are not intended for that
purpose.
The instruments and accessories described in
this User Manual have been tested for safety and
potential hazards. The responsible Leica affiliate
must be consulted whenever the instrument is
altered, modified or used in conjunction with
non-Leica components that are outside of the
scope of this manual.
Unauthorized alterations to the instrument or
noncompliant use shall void all rights to any
warranty claims.
Place of use
O See "Safety Concept" booklet and the user
manuals available on the DVD.
O Electrical components must be placed at
least 10 cm away from the wall and from
flammable substances.
O Avoid large temperature fluctuations,
direct sunlight and vibrations. These conditions can distort measurements and micrographic images.
O In warm and warm-damp climatic zones,
the individual components require special
care in order to prevent the growth of
fungus.
Leica LMT260 XY Scanning Stage User Manual General Notes 7
Responsibilities of person in charge of
instrument
O See "Safety Concept" booklet and the user
manuals available on the DVD.
Ensure that:
O ...the Leica LMT260 XY scanning stage and
accessories are operated, maintained and
repaired by authorized and trained personnel only.
O ...all operators have read, understood and
will observe this user manual, and particularly the safety regulations.
Repairs, service work
O See "Safety Concept" booklet and the user
manuals available on the DVD.
O Only original Leica Microsystems spare
parts may be used.
O Avoid contact with powered electrical
circuits, which can lead to injury.
Transport
O Use the original packaging for shipping or
transporting the individual modules of the
Leica LMT260 XY scanning stage and the
accessory components.
O In order to prevent damage from vibra-
tions, pack all moving parts that (according to the user manual) can be assembled
and disassembled by the customer in their
original transport packaging and ship them
appropriately.
Leica LMT260 XY Scanning Stage User Manual General Notes 8
Integration in third-party products
O See "Safety Concept" booklet and the user
manuals available on the DVD.
Disposal
O See "Safety Concept" booklet and the user
manuals available on the DVD.
Legal regulations
O See "Safety Concept" booklet and the user
manuals available on the DVD.
EC Declaration of Conformity
O See "Safety Concept" booklet and the user
manuals available on the DVD.
Health risks
Workplaces with microscopes facilitate and
improve the viewing task, but they also impose
high demands on the eyes and holding muscles
of the user. Depending on the duration of uninterrupted work, asthenopia and musculoskeletal problems may occur. For this reason, appropriate measures for reduction of the workload
must be taken:
O Optimal arrangement of workplace, work
assignments and work flow (changing tasks
frequently).
O Thorough training of the personnel, giving
consideration to ergonomic and organizational aspects.
The ergonomic optical design of Leica microscopes and design of the Leica LMT260 XY scanning stage are intended to reduce the exertion
of the user to a minimum.
Leica LMT260 XY Scanning Stage User Manual General Notes 9
Introduction
Leica LMT260 XY Scanning Stage User Manual Introduction 10
Congratulations!
Congratulations on purchasing the Leica
LMT260 XY scanning stage by Leica Microsystems. The Leica LMT260 XY turns your Leica
microscope into a universal, highly versatile
tool for viewing and documenting microscopic
objects or several objects simultaneously in a
sample holder.
Leica LMT260 XY Scanning Stage
The Leica LMT260 XY scanning stage provides
for direct positioning in two axes by means of
linear motors. In addition, an absolute measurement of the stage position occurs, thereby eliminating the need for referencing after switching
on. The flat assembly enables ideal accessibility
to the object and the control elements of the
microscope.
A slide may be easily and precisely moved
manually at any time by activating the Leica
LMT260 XY scanning stage.
In addition, the Leica LMT260 XY scanning
stage features high-precision positionability,
repeatability and minimal processing noise.
External CAN Handwheel
The ergonomically designed, dynamic CAN
handwheel is equipped with precision roller
bearings as well as a high-precision, magnetic
measuring system, thereby offering high resolution to control the stage precisely.
The CAN handwheel speed can be varied by
means of two switches and is optimized for
both left-hand and right-hand operation.
External Control Unit HydraDT
Using the external control unit HydraDT, five
Leica LMT260 XY scanning stage positions can
be stored and automatically recalled by pressing a button.
The zero position (center position) of the Leica
LMT260 XY scanning stage can also be automatically recalled by pressing a button.
Leica LMT260 XY Scanning Stage User Manual Introduction 11
Standard Delivery and Optional Accessories
1
2
5
4
6
7
8
9
3
3
4
1
2
Standard delivery
The LeicaLMT260 XY scanning stage's standard
delivery includes:
1 Leica LMT260 XY scanning stage
2 External control unit HydraDT
3 Power cable
4 CAN cable
5 External CAN handwheel
6 USB cable
7 HDMI cable (sensor X) (fixed onto the stage)
8 HDMI cable (sensor Y) (fixed onto the stage)
9 Motor X+Y-cable (fixed onto the stage)
Optional accessories: Adapter plates
1 Adapter plate for the Leica TL5000 Ergo
transmitted light base
2 Adapter plate for the Leica TL4000 series
(RCI, RC & BFDF)
3 Glass stage plate
4 Live on Stage sample holder 160 x 110 mm
Additional sample holders are available in
dimensions 160 x110 mm, information
available upon request or in the Leica Live on
Stage sample holder brochure.
Leica LMT260 XY Scanning Stage User Manual Introduction 12
Overview of the Instrument
1
2
3
6
5
4
Leica LMT260 XY Scanning Stage
1 Transport carriage Y
2 Transport carriage X
3 Push button with integrated status light
4 HDMI cable (sensor X)
HDMI cable fixed onto the stage
5 HDMI cable (sensor Y)
HDMI cable fixed onto the stage
6 Connection for motor X+Y-cable
Motor X+Y-cable fixed onto the stage
Leica LMT260 XY Scanning Stage User Manual Introduction 13
Loading...