Leica A60 S Assembly Sheet

Leica A60 S – Assembly Sheet

This assembly sheet does not replace the complete manual
on provided CD (i.e. LED illumination installation).

Note: For safety reasons, it is highly recommend that two
people assemble the column to the base plate. One person

should hold the base plate securely on a non-skid surface,
while the second person attaches the column to the base.

One box contains horizontal arm, cross
joint, safety clamp & tools

Take out parts from boxes. Place base
plate on non skidding surface.

Insert horizontal arm into the cross joint
observing the flattening of the arm and
orientation of joint according to image.

Tighten allen screw connecting column
to base. Attention: washer must be
placed between base and column.

Place the cross joint on top of the
safety clamp on the column and lock
arm with referring knob.

Allen key, washer and allen screwOne box contains the base plate.

Mount the safety clamp to the column.

Remove allen screw and washer from
the Leica A60 instrument as shown.

Mount the Leica A60 to the horizontal
arm from below...

... and immediately secure the
instrument with previously removed
washer and screw.

If necessary connect base plate to
grounding cable with suitable plug.

Leica A60 F – Assembly Sheet

This assembly sheet does not replace the complete manual
on provided CD (i.e. LED illumination installation).

Box contains flex arm and table clamp.

Choose position on table edge and
tighten well the two screws.

...and bring pin into horizontal position.
Tighten screws again.

Take out table clamp from box.

Insert arm into table clamp and tighten
screw.

tighten knob to secure the instrument.

Pick one of three positions of the clamp
according to table thickness.

Open the two screws on the focus arm
of the Leica A60...

Your instrument is now ready for usage!Attach Leica A60 to flex arm and