Page 1
Lathem Time Tech Tips
Tip:
The following setting instructions refer to the display of the DWA, DWA18-1 and 4000DWA Series.
"Old Style" Keypad
EDAY0SAT
7ON
SUN
18OFF
MON
29HD
TUE
3AMCLR
WED
4PM
THU
5WKCLK
FRI
6CKT*
MEM
CLR
Setting the Time DWA Series
To set the time on an "Old Style" keypad:
!
If you have a 4000DWA Series, wait until you here the clock "click", make
a sample registration and note the time
!
Set the Time of Day by pressing
1. Current Day of Week
2.
WK
AM
time)
or
PM
CLK
3.
4. Hour and Minutes (set the minutes one-minute ahead of the clock
5. Wait until the clock "clicks" and press
Example: To set the time to Monday, 9:30AM press:
MON
2WKAM930CLK
Note: A colon in the upper left area of display indicates PM
"New Style" Keypad
SET
TIME
12/24 HR
DISPLAY
RESTART
SUN MON TUE
WED THU FRI
SAT REV FWD
MANUAL
SIGNAL
SET
DAY
SIGNAL
OFF
CLEAR
SIGNAL
TEST
BATT RUN
PGM
SIGNALS
SIGNAL
LENGTH
NEXT
SIGNAL
To set the time on a "New Style" keypad:
!
If you have a 4000DWA Series, wait until you here the clock "click", make
a sample registration and note the time
!
Set the Day of Week by pressing
1.
SET DAY
2. Current Day of Week
3.
RUN
!
Set the Time of Day by pressing
1.
SET TIME
2. Press
time
3. Wait until the clock "clicks" and press
Example: To set the Day of Week to Monday press:
SET
DAY MON RUN
Example: To set the Time of Day to 9:30AM press:
SET
TIME FWD RUN
FWD
or
to set the display one-minute ahead of the clock
REV
RUN
Tip Set DWA.pdf Page 1 of 1
Note: A colon in the upper left area of display indicates PM
Loading...