Lathem LTT, LTTN, LTTC, LT, LTN User Manual

...
5 (1)
Lathem LTT, LTTN, LTTC, LT, LTN User Manual

LT SERIES

User’s Manual

1 - LT Series Operations Manual

TABLE OF CONTENTS

 

Specifications.......................................................................

2

Introduction..........................................................................

3

LT Series Models.................................................................

4

Optional Features.................................................................

4

Getting Started .....................................................................

5

Installation ...........................................................................

5

Registration..........................................................................

5

Setting the Type Wheels ......................................................

6

Setting the Digital Display...................................................

7

Adjusting Print Impact.........................................................

8

Repeat/Advance Operation ..................................................

8

Consecutive/Duplicate Count ..............................................

9

Adjusting the Registration Position ...................................

10

Changing the Ribbon .........................................................

11

Changing the Fuse .............................................................

12

Changing the Platen ...........................................................

13

Warranty ............................................................................

14

WARNING: This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing devise pursuant to Subpart J of part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of the equipment in a residential area is likely to cause interference, in which case, the user, at his own expense, will be required to take whatever measures may be required to correct the interference.

This document is a confidential proprietary document for the sole use of Lathem Time customers. The information contained herein may not be reproduced for any purpose without the written permission of Lathem Time Corporation.

Copyright © 2009

LATHEM TIME CORPORATION

200 Selig Drive SW., Atlanta, Georgia 30336

2 - LT Series Operations Manual

 

SPECIFICATIONS

PHYSICAL

 

Height:

7 inches

Width:

5 1/4 inches

Depth:

11 inches

Weight:

12 3/4 pounds (standard models)

 

14 pounds (numbering models)

Case:

Impact Resistant Reinforced Lexan

Color:

Cool Gray

Power Cord Length:

6 Feet

COMPONENTS

 

Print Wheels:

Engraved Brass or Cast Zinc Alloy

Printing Platen Assembly:

Textured, soft surface for single copies.

Ribbon:

Purple Silk

Fuse:

3 Amp.

Digital Display:

LED

Timing Motor:

1 RPM, K342 type

Ribbon Drive Motor:

21 RPM, Model 60-3

Transformer:

12 VAC, 50/60 Hz 117 VAC

 

(50/60 Hz 230 VAC Optional)

Numbering Solenoid:

110/120 VAC (220 VAC Optional)

Print Solenoid:

110/120 VAC (220 VAC Optional)

FEATURES

 

Print Impact Adjustment:

Variable, for multi-part forms

Time Format:

12-hour AM/PM

 

24-hour Continental Optional

POWER REQUIREMENTS

 

Voltage:

110/120 VAC (220 VAC Optional)

Current:

9 Amp. Max. Intrm. 110/120 VAC

 

4 1/2 Amp. Max. Intrm. 220 VAC

Frequency:

60 Hz (50 Hz Optional)

POSSIBLE SHOCK HAZARD EXISTS WHEN CASE COVER IS REMOVED AND AC POWER IS CONNECTED. USE CAUTION WHEN SETTING TYPE SECTION.

3 - LT Series Operations Manual

INTRODUCTION

The Lathem LT Series time stamps are considered "standard" by thousands of businesses and institutions because of their low initial cost and years of proven, trouble-free operation. The LT Series offers a wide variety of registration combinations that may be used for timing, numbering, and dating functions. The LT Series consists of four models, and is designed to meet virtually all of your validating needs. Standard features include: automatic registration; motor-driven ribbon shift for smooth, quiet operation; easy ribbon changing; registration position adjustment; and registration impact pressure control. Available options include a digital display, a manual registration button; allowing automatic or manual action, as well as repeat and advance numbering. All units carry a full one-year factory warranty.

Lathem LT Series: Time, Date, and Numbering Stamps

Please read all directions carefully before operating or maintaining your LT Series unit. This operations manual is designed to provide basic operating instructions. Minor maintenance and adjustments may also be performed easily and effectively by referring to these instructions. For service beyond the scope of this manual, contact the dealer from whom you purchased the equipment, or Lathem Time Corporation. Should it be necessary to return the unit, retain the original packing materials for shipping.

4 - LT Series Operations Manual

LT SERIES MODELS

LTD

Registers date, month, and year. Type wheels must be advanced manually. Year wheels carry ten (10) years.

LTN

Registers consecutive numbers. Basic unit includes six (6) numbering wheels which advance automatically. Up to five additional numerical, letter, or code wheels may be purchased. The additional wheels must be advanced manually. (Note: The manual registration button is standard on this module.)

LTT(C)

Registers time, date, month, and year. Type wheels advance automatically. Month and date wheels must be reset manually the first day of each month. Models with a "C" designation have the optional digital display.

LTTN(C)

Registers time, date, month, and year, as well as consecutive numbering. The unit includes six (6) numbering wheels which advance automatically. Month and date type wheels must be reset manually the first day of each month. Models with a "C" designation have the optional digital display. (Note: The manual registration button is standard on this module.)

CONSECUTIVE/DUPLICATE COUNT

Models LTN and LTTN can repeat the same number once, twice, three times or four times before automatically advancing. (For jumper/shunt selection, see page 9, "Consecutive / Duplicate Count.")

OPTIONAL FEATURES

REPEAT/ADVANCE SWITCH

Overrides automatic numbering advance to allow repeating the same number if desired, or advances to a higher number. (See page 8 for operating instructions.)

INSCRIPTION PLATES

The die plates may be permanently fixed or removable. They can have up to 3 lines of 20 characters per line, or carry facsimile signatures. (Note: Removable die plates must be removed before opening top frame and reinstalled after closing top frame.)

Loading...
+ 11 hidden pages