Landoll SCP-2 User Manual
OPERATOR’S MANUAL
REPAIR PARTS CATALOG
Subsoil Chisel Plow
with ONE & TWO SHANKS
MODELS: SCP-1
SCP-2
IMPORTANT!
Repairs cannot be purchased
retail direct from factory.
Order through your Brillion dealer.
BRILLION FARM EQUIPMENT
1298rev2-10-04 BRILLION, WISCONSIN 54110 6K007
www.brillionfarmeq.com
1298rev401 6K007
1298rev401 6K007
SUBSOIL CHISEL PLOW
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Introduction ..................................................................................................................................... 3
Location Reference ................................................................................................................ 3
Parts Ordering ........................................................................................................................ 3
Safety Suggestions ........................................................................................................................ 4
Safety Signs ............................................................................................................................ 4
Safety Sign Location .............................................................................................................. 5
Set-Up Instructions ......................................................................................................................... 6
Shank Assembly ..................................................................................................................... 6
Support Stands ....................................................................................................................... 7
Machine Specifications ................................................................................................................... 7
SCP-1 & SCP-2
CONTENTS
Repair Parts.................................................................................................................................. 8
1-Shank Frame Assembly ...................................................................................................... 8
2-Shank Frame Assembly .................................................................................................... 10
Shank Assembly ................................................................................................................... 12
Index ............................................................................................................................................. 14
1298rev401 6K007
Page I
1298rev401 6K007
Introduction
Your Brillion Sub-soil Chisel Plow is built with the best materials and workmanship available. It has
been designed to give years of trouble-free operation. Proper care and operation will insure that you
receive the service and long life built into this machine.
Study this manual carefully before attempting to operate the machine. If items in the manual are not
understood, contact your local Brillion dealer.
This safety alert symbol is used to call your attention to
instructions concerning your personal safety. It is found on your
machine and in this manual. It is important to pay attention the the
precautions indicated and to be alert to the possiblility of personal
injury or death.
Federal law requires you to explain the safety and operating
instructions furnished with this machine to all employees before they
are allowed to operate the machine. These instructions must be
repeated to the employees at the beginning of each season. Be sure
to observe and follow these instructions for your own and your
employee’s safety.
Location Reference
Right hand, left hand, and forward designations are determined by standing behind the machine and
facing the direction it will travel during field operation.
Parts Ordering
When ordering parts for this machine, include the complete model number and serial number. Refer to the
nameplate located on the right side of the center frame plates. Please read and record this number upon
taking delivery of this machine. See Figure 1.
Machine Model No. ________________________
Serial Number ____________________________
Date Purchased __________________________
Be sure to read the Warranty Card which is provided.
Return the proper portion of the Warranty Card for
recording at the factory.
Nameplate
Figure 1
1298rev401 6K007
Page 3
SAFETY SUGGESTIONS
Investigation has shown that nearly one-third of all farm accidents are caused by careless use of
machinery. You can do your part in improving safety by observing the following suggestions. Insist
that all people working with you or for you abide by them.
1. Never turn corners at a high rate of speed.
2. Never work under the chisel plow unless it is securely blocked up and cannot be knocked off
the blocks.
3. Always take care in raising and lowering the chisel plow, and be certain that no one is in the
way.
4. Never allow passengers to ride on the chisel plow.
5. Display the Slow Moving Vehicle emblem when traveling on roads.
6. When traveling on the road at night, make sure that reflective decals and accessory warning
lights are mounted and visible on the machine. Local regulations should be checked first, and if
there are none, the chisel plow owner should take the initiative to make his machine noticeable
at night.
SAFETY WARNING SIGNS
The “WARNING” signs illustrated on this page are placed on the machine to warn of hazards.
The warnings found on the sign are for your personal safety and those around you. Their locations
on the machine are shown on the following page. OBSERVE THESE WARNINGS!
Keep these signs clean so they can be observed readily. Wash with soap and water or cleaning
solution as required.
Replace “WARNING” signs should they become damaged, painted over or if they are missing.
When replacing decals, clean the machine surface thoroughly using soap and water or cleaning
solution to remove all dirt and grease.
Figure 2A
CAUTION
1. DO NOT LUBRICATE, ADJUST OR REPAIR WHEN MACHINE IS IN MOTION.
2. DO NOT TOW OR TRANSPORT FASTER THAN 15 MILES PER HOUR.
3. DO NOT RIDE OR ALLOW OTHERS TO RIDE ON THE MACHINE.
4. BLOCK UP ALL HYDRAULICALLY OR MECHANICALLY RAISED COMPONENTS TO
PREVENT UNINTENDED LOWERING, OR LOWER THE MACHINE TO THE GROUND
TO MAKE ADJUSTMENT OR REPAIRS WHEN NOT IN USE.
5. KEEP ALL PERSONS AWAY FROM MACHINE DURING HITCHING AND OPERATING.
6. SLOW DOWN BEFORE MAKING SHARP TURNS OR USING THE BRAKES.
DRIVE SLOWLY OVER ROUGH GROUND, SIDE HILLS, AND AROUND CURVES TO
AVOID TIPPING.
7. COMPLY WITH ALL LAWS WHEN TRANSPORTING THE MACHINE ON PUBLIC
ROADWAYS.
8. INSTRUCT ALL OPERATORS IN THE SAFE OPERATION OF THE MACHINE.
REVIEW THE OPERATOR’S MANUAL FOR CORRECT PROCEDURES.
9. BLOCK IMPLEMENT TO PREVENT MOVEMENT WHEN UNHITCHED FROM TRACTOR.
8J310
1
CAUTION
DEEP TILL OPERATION CAN DAMAGE
UNDERGROUND UTILITIES CAUSING
DANGEROUS CONDITIONS AND
DISRUPTING SERVICES. DETERMINE
THE DEPTH AND LOCATION OF BURIED
CABLES, PIPE LINES, AND DRAIN
TILES BEFORE OPERATION.
1. 8J310 - Decal, “Caution” list
2. 2J430 - Decal, Reflective Red
3. 8K829 - Decal, Deep Till Caution
2
3
8K829
1298rev401 6K007
2-10-04
Page 4
Loading...