Landoll 3K914 User Manual

3K914 REAR HITCH KIT

INSTALLATION INSTRUCTIONS

Place L.H. Hitch Bracket on top of the Landcommander frame and position as shown in
drawing below. Place a 3K935 strap on underside of frame and assemble loosely with
5/8 X 12” machine bolts, lockwashers, and nuts. Attach the R.H. hitch bracket in
similar fashion.

Next, attach the 1” thick hitch plate to the angles at the rear of the hitch brackets.
Use 5/8 X 2 1/2” capscrews, lockwashers, flat washers, and nuts.

Square up the entire assembly and tighten all fasteners.

LANDCOMMANDER FRAME

5/8 X 12” MACHINE BOLTS

REAR

5/8 LOCK WASHERS
5/8 HEX NUTS
3K935 STRAPS (UNDER FRAME)

5/8 X 2 1/2” CAPSCREWS
5/8 LOCK WASHERS
5/8 FLAT WASHERS (ON BOTTOM SIDE, AGAINST SLOTS)
5/8 HEX NUTS

0613 3K937