Landoll 2P112 User Manual

INSTALLATION INSTRUCTIONS

NOTE

9 1/4”

MID-MOUNT HITCH KIT (LCSIII) P/N 2P112

LAND COMMANDER III

Prior to mounting the Mid-Mount Hitch loosen the
Hydraulic Hose Clamp Pairs to allow hose movement and
easier hitch installation.

1. Position the Mid-Mount Hitch Weldment onto the
inner frame tubes, 9 1/4” from the lateral frame tube.
See Figure 1-1.

2. Place a 4 hole plate under the frame and attach it to
the mount using (4) 5/8-11 x 8 bolts and lock nuts. Do
not fully tighten at this time. Repeat the procedure for
the remaining 3 plates.

3. Insert the Tandem Haul Adapter Plug into the plug
bracket and secure with attached hardware.

4. Attach both (2) 08MJ X 08FOR Bulkhead Fittings into
the plug bracket and tighten.

5. Attach the (2) Female Couplings and the (2) 45 deg.
Fittings to the Bulkhead Fittings and tighten.

6. Attach the Tandem Haul Adapter Wiring Harness to
the Tandem Haul Adapter Plug, then route the
harness along the left hand side of frame, back to the
AG Harness Extension and plug-in.

7. Attach both (2) 3/8 x 285” Hydraulic Hoses to the 45
deg. fittings and tighten. Attach (2) 08MJ x 08MOR
Adapters and Male Coupling Tips to the opposite end
of the hoses and tighten. Route the harness along
the left hand inner frame, and along the Drawbar
through the Hose Support. Attach to the tractor.

8. Secure all loose hoses and wiring harnesses to the
frame using Ty-Straps provided.

9. Insert Drilled Ball Hitch into top of mount and secure
with 3/4” pin.

10. Tighten all bolts and hoses. See Page 1-3.

Figure 1-1: Mid-Mount Hitch Placement

2P115 1-1

3

1

2

8

7

9

6

12

11

10

13

14

4

5

15

Figure 1-2: 2P112 Mid-Mount Hitch Kit

2P112 Mid-Mount Hitch Kit

ITEM PART NUMBER DESCRIPTION QTY.

1 2P113 HITCH MID-MOUNT LCSIII WLD 1
2 2P125 HITCH BALL,2-5/16 DRILLED 1
3 2P123 PLATE, 4-HOLE PAINTED 4
4 1-654-010059-21 SCREW,HEX CAP, 5/8-11UNCX8 GR5 16
5 1-512-010005-13 NUT, HEX SLFLKG GRB 5/8-11 16
6 4K826 TANDEM HAUL ADAPTER (002500) 1
7 1P782 BULKHEAD, O8MJ X 08MOR 2
8 5K499 HYDRAULIC COUPLING 2
9 121031 FITTING,45EL #8M X #8F 37SWVL 2
10 4K919 HYDRAULIC HOSE - 285” 2
11 202702-8-8S ADAPTER #8 O-RING TO #8 TUBE 2
12 141828 MALE TRACTOR TIP 2
13 105874 TIE,STRAP PLSTC 21.5-24X.301 1
14 1P328 AG HARNESS EXT 12’-6” 1
15 3P007 PIN, 3/4 W/CHAIN 1

1-2 2P115