
Antennas & Accessories
AirLancer ON-D9a
WLAN directional antenna with 9° beam angle and 2x2 MIMO
The weatherproof LANCOM directional antenna AirLancer ON-D9a is ideal for establishing high-speed
point-to-point links for bridging long distances by WLAN in the outdoors. Thanks to 2x2 MIMO, it offers maximum
performance for the WLAN standard IEEE 802.11ac with up to 867 Mbps.
a
WLAN directional antenna with 9° beam angle and +23 dBi gain (5 GHz)
a
2x2 MIMO technology for reliable WLAN transmissions at up to 867 Mbps and long-distance point-to-point
links
a
Mounting kit, cables and adapters included
a
Connects to LANCOM indoor access points via the adapter AirLancer AN-RPSMA-NJ

AirLancer ON-D9a
Technical Information
4900 Mhz - 5900 MhzFrequency range
50 OhmImpedance
Dual linear, horizontal and verticalPolarization
23 dBiGain
9°Half-Power-Beam-Width horizontal
9°Half-Power-Beam-Width vertical
typ. 1.5:1 - max. 2.0:1VSWR
Mechanical Information
2 x N-Jack - 2 x 50cm NP-NP AdapterConnectors & Cables
340 mm (L) x 340 mm (W) x 30 mm (H)Dimensions
1.6 kgWeight
UV resistant plasticHousing material
lightgrayColor
-40° to 80°COperating temperature
Article
Point-to-Point radio linkRecommended use case
Wall and pole mount includedMounting material
Support
2 years, support via hotline and Internet KnowledgeBaseWarranty
Accessories
AirLancer cable NJ-NP 3m, item no. 61230, AirLancer cable NJ-NP 6m, item no. 61231, AirLancer cable NJ-NP 9m, item no. 61232Antenna cable
AirLancer AN-RPSMA-NJ adapter to connect ON Antennas to LANCOM Indoor Access Points and IAPs, item no. 61259Adapter
AirLancer SN-ANT surge arrestor (2.4 and 5 GHz), to be integrated between Access Point and antenna, item no. 61258Surge arrestor (antenna cable)
Fit for the following LANCOM devices
LANCOM OAP Series 32x and 8xxOutdoor
All LANCOM Indoor Access Points and IAPs via separately available Adapter AirLancer AN-RPSMA-NJ*Indoor
You need one adapter per antenna connector*) Note
Item number(s)
61244AirLancer ON-D9a