Lancom OAP-322 User Manual

Wireless LAN

LANCOM OAP-322

Dual-radio outdoor 11n WLAN access point for professional outdoor WLAN
applications – simultaneously in the 2.4-GHz and 5-GHz frequency bands

The LANCOM OAP-322 features two radio modules for parallel operation in the 2.4-GHz and 5-GHz frequency

bands. Connectors for external antennas mean that it offers maximum flexibility for outdoor wireless applications.

a

Dual concurrent WLAN – parallel operation at 2.4 and 5 GHz with up to 300 Mbps with IEEE 802.11a/g/n

a

Four external antenna connectors

a

Robust IP66 protective housing – reliable even at extreme temperatures (-33°C to +70°C)

a

Dynamic WLAN optimization thanks to LANCOM Active Radio Control (ARC)

a

Professional security features such as IEEE 802.1X

a

Zero-touch deployment with a LANCOM WLAN controller or LSR

a

Easy and secure integration of external users with the LANCOM Public Spot Option

DATASHEET

LANCOM OAP-322

Dual concurrent WLAN with up to 300 Mbps

The LANCOM OAP-322 features two WLAN radio modules

for IEEE 802.11n and offers a wide range of options for

outdoor applications: The quick and easy setup of modern

outdoor hotspots, professional WLAN coverage of open

spaces, or even high-speed P2P links for interconnecting

buildings in the 5-GHz band.

Maximum reliability in all weathers

The LANCOM OAP-322 has a robust IP66 protective housing,

making it fully dust proof and water-jet resistant. What's

more, a temperature range of -33°C to +70°C guarantees

reliable operation even under extreme conditions.

Active Radio Control for dynamic radio-field

optimization

The LANCOM OAP-322 supports the WLAN optimization

concept LANCOM Active Radio Control. This intelligent

combination of innovative features included with the LCOS

operating system - such as Band Steering, Adaptive Noise

Immunity, RF Optimization, and Client Steering - sustainably

increases WLAN performance and supports administrators

with professional tools for WLAN management.

Secure integration of external users

In combination with the LANCOM Public Spot option, the

LANCOM OAP-322 is ideal for operating hotspots. Users

benefits from a hotspot that is secure and easy-to-use, while

hotspot operators can be sure that their own network

remains separate from the guest network.

Maximum future-proofing

LANCOM products are designed for a service life of several

years and are equipped with hardware dimensioned for the

future. Even reaching back to older product generations,

updates to the LANCOM Operating System - LCOS - are

available several times a year, free of charge and offering

major features.

LANCOM security for wireless networks

With numerous integrated security features, such as IEEE

802.1X, this outdoor access point provides optimal security

for networks. Administrators and employees alike benefit

from professional security policies on the network.

Support for zero-touch deployment

Quick and easy network integration of the access points as

well as automatic assignment of the configuration - without

manual configuration. For WLAN controller or LSR-based

installations, the access point receives an appropriate

configuration immediately after network authentication.

DATASHEET

LANCOM OAP-322

WLAN product specifications

2400-2483.5 MHz (ISM) and 5150-5825 MHz (depending on country-specific restrictions)Frequency band 2.4 GHz or 5 GHz

Data rates IEEE 802.11n

Data rates IEEE 802.11a/ h

Data rates IEEE 802.11b/g

Range (outdoor / P2P)

per transmit chain

Output power at radio module, 2.4 GHz
and per transmit chain

Max. allowed radiation power (EIRP), 5 GHz

GHz

Receiver sensitivity 2.4 GHz

Radio channels 5 GHz

Supported WLAN standards

IEEE standards

Standard IEEE 802.11n

Supported features

WLAN operating modes

Modes

Security

Encryption options

Encryption

300 Mbps according to IEEE 802.11n with MCS15 (fallback to 6,5 Mbps with MCS0). Compatible to IEEE 802.11a/n, IEEE 802.11g/n,
IEEE 802.11b/g/n or IEEE 802.11b/g compatibility mode or pure IEEE 802.11n, pure IEEE 802.11a, IEEE 802.11g or pure IEEE 802.11b
mode and data rates selectable

54 Mbps (fallback to 48, 36 , 24, 18, 12, 9, 6 Mbps, Automatic Rate Selection), fully compatible with TPC (adjustable power output)
and DFS (automatic channel selection, radar detection) and data rates selectable

54 Mbps to IEEE 802.11g (fallback to 48, 36, 24, 18, 12, 9, 6 Mbps, Automatic Rate Selection) compatible to IEEE 802.11b (11, 5.5,
2, 1 Mbps, Automatic Rate Selection), IEEE 802.11b/g compatibility mode or pure IEEE 802.11g or pure IEEE 802.11b and data rates
selectable

The actual range depends on the environmental conditions. The Antenna Distance Calculator on www.lancom.de provides information
on the possible data rates and distances.

IEEE 802.11a/h: +14 dBm @ 54 MBit/s, IEEE 802.11n: +12 dBm @ (MCS7, 20 MHz), +11 dBm @ (MCS7, 40 MHz)Output power at radio module, 5 GHz and

IEEE 802.11b: +19 dBm @ 54 MBit/s, IEEE 802.11g: +16 dBm @ 54 MBit/s, IEEE 802.11n: +15 dBm @ (MCS7, 20 MHz), +14 dBm @
(MCS7, 40 MHz)

IEEE 802.11a/h: Up to 30 dBm / 1000 mW EIRP (depending on national regulations on channel usage and subject to further obligations
such as TPC and DFS)

IEEE 802.11b/g: Up to 20 dBm / 100 mW EIRP (transmission power control according to TPC)Max. allowed radiation power (EIRP), 2.4

Transmission power reduction in software in 1 dB steps to min. 0.5 dBmMinimum transmission power

IEEE 802.11a/h: -77 dBm @ 54 Mbps, IEEE 802.11n: -63 dBm@ MCS7, 20 MHz, -70 dBm @ MCS7, 40 MHzReceiver sensitivity 5 GHz

IEEE 802.11b: -85 dBm @11 Mbps, IEEE 802.11g: -77 dBm @ 54 Mbps, IEEE 802.11n: -74 dBm @ MCS7, 20 MHz, -71 dBm @ MCS7,
40 MHz

Up to 26 non-overlapping channels (available channels and further obligations such as automatic DFS dynamic channel selection
depending on national regulations)

Up to 13 channels, max. 3 non-overlapping (depending on country-specific restrictions)Radio channels 2.4 GHz

Up to 32 independent WLAN networksMulti-SSID

Up to 30 clients per radio (recommended), 512 clients (max.)Concurrent WLAN clients

IEEE 802.11n, IEEE 802.11a, IEEE 802.11g, IEEE 802.11b, IEEE 802.11i, IEEE 802.1X, IEEE 802.11u, IEEE 802.11r (Fast Roaming), IEEE

802.11w (Protectet Management Frames), WME and U-APSD/WMM Power Save as defined in IEEE 802.11e, IEEE 802.11h, IEEE

802.11d

2x2 MIMO, 40-MHz channel, 20/40MHz coexistence mechanisms in the 2.4 GHz band, MAC aggregation, Block Acknowledgement,
STBC (Space Time Block Coding), LDPC (Low Density Parity Check), MRC (Maximal Ratio Combining), Short Guard Interval

WLAN access point (standalone, WLC or Lightweight Controller architectur managed), WLAN bridge (P2P or P2MP) (standalone or
AutoWDS*), (standalone, WLC or Lightweight Controller architectur managed), WLAN client mode, transparent WLAN client mode

Only in installations with WLAN controller*) Note

IEEE 802.1X (WPA2-Enterprise), IEEE 802.11i (WPA2-Personal), Wi-Fi Certified™ WPA2™, WPA, WEP, IEEE 802.11w (Protected
Management Frames), LEPS (LANCOM Enhanced Passphrase Security)

AES:CCMP (Advanced Encryption Standard with Counter Mode and Cipher Block Chaining Message Authentication Code Protocol),
TKIP (Temporal Key Integrity Protocol), RC4 (only used by WEP)

EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-AKA Prime, EAP-FASTEAP types (authenticator)

LCOS 9.10

DATASHEET

LANCOM OAP-322

Security

RADIUS/EAP-server

Others

LANCOM Active Radio Control

Roaming

Roaming

Layer 2 features

Protocols

Layer 3 features

Firewall

Security

IPv4 services

IPv6 protocols

WAN protocols

User administration MAC-based, rate limiting, passphrases, VLAN user based, authentication of IEEE 802.1X clients via EAP-TLS,
EAP-TTLS, EAP-MD5, EAP-GTC, PEAP, MSCHAP or MSCHAPv2

WLAN protocol filters, IP-redirection of any packet received over the WLAN interface, IEEE 802.1X supplicant, background scanning,
client detection ("rogue WLAN client detection"), Wireless Intrusion Detection System (WIDS)

Steering of WLAN clients to the ideal access pointClient Steering*

Steering of 5GHz clients to the corresponding high-performance frequency bandBand Steering

Selection of optimal WLAN channels by the administratorManaged RF Optimization*

Better WLAN throughput due to immunity against interferencesAdaptive Noise Immunity

Monitoring your WLAN for sources of interferenceSpectral Scan

Only in installations with WLAN controller*) Note

IAPP (Inter Access Point Protocol), IEEE 802.11r (Fast Roaming), OKC (Opportunistic Key Caching), Fast Client Roaming (only in operating
mode client modus)

4.096 IDs based on IEEE 802.1q, dynamic assignment, Q-in-Q taggingVLAN

WME based on IEEE 802.11e, Wi-Fi Certified™ WMM®Quality of Service

SSID based, WLAN client basedRate limiting

IGMP-SnoopingMulticast

Ethernet over GRE-Tunnel (EoGRE), ARP-Lookup, LLDP, DHCP option 82, IPv6-Router-Advertisement-Snooping, DHCPv6-Snooping,
LDRA (Lightweight DHCPv6 Relay Agent), Spanning Tree, Rapid Spanning Tree, ARP, Proxy ARP, BOOTP, DHCP

Stateful inspection firewall including paket filtering, extended port forwarding, N:N IP address mapping, paket tagging, user-defined
rules and notifications

Traffic shaping, bandwidth reservation, DiffServ/TOS, packetsize control, layer-2-in-layer-3 taggingQuality of Service

Intrusion Prevention, IP spoofing, access control lists, Denial of Service protection, detailed settings for handling reassembly,
session-recovery, PING, stealth mode and AUTH port, URL blocker, password protection, programmable reset button

PAP, CHAP, MS-CHAP, and MS-CHAPv2PPP authentication mechanisms

VRRP (Virtual Router Redundancy Protocol), analog/GSM modem backupHigh availability / redundancy

IPv4-, IPv6-, NetBIOS/IP multiprotokoll router, IPv4/IPv6 dual stackRouter

ARF (Advanced Routing and Forwarding) up to separate processing of 16 contextsRouter virtualization

HTTP and HTTPS server for configuration by web interface, DNS client, DNS server, DNS relay, DNS proxy, dynamic DNS client, DHCP
client, DHCP relay and DHCP server including autodetection, NetBIOS/IP proxy, NTP client, SNTP server, policy-based routing

DHCPv6 client, DHCPv6 server, DHCPv6 relayIPv6 services

WEBconfig, HTTP, HTTPS, SSH, Telnet, DNS, TFTP, firewall, RAS dial-inIPv6 compatible LCOS applications

RIPv2Dynamic routing protocol

DNS, HTTP, HTTPS, ICMP, NTP/SNTP, NetBIOS, PPPoE (server), RADIUS, RADSEC (secure RADIUS), RTP, SNMP, TFTP, TACACS+IPv4 protocols

NDP, stateless address autoconfiguration (SLAAC), stateful address autoconfiguration (DHCPv6), router advertisements, ICMPv6,
DHCPv6, DNS, HTTP, HTTPS, PPPoE, RADIUS, SMTP

VDSL, ADSL1, ADSL2 or ADSL2+ with external ADSL2+ modem at an ETH portWAN operating mode

PPPoE, Multi-PPPoE, ML-PPP, GRE, EoGRE, PPTP (PAC or PNS), L2TPv2 (LAC or LNS) and IPoE (using DHCP or no DHCP), RIP-1, RIP-2,
VLAN, IPv6 over PPP (IPv6 and IPv4/IPv6 dual stack session), IP(v6)oE (autokonfiguration, DHCPv6 or static)

6to4, 6in4, 6rd (static and over DHCP), Dual Stack Lite (IPv4-in-IPv6-Tunnel)Tunneling protocols (IPv4/IPv6)

LCOS 9.10

DATASHEET

LANCOM OAP-322

Interfaces

1 x 10/100/1000BASE-T autosensing (RJ-45), PoE (Power over Ethernet)Ethernet port

1 x 10/100BASE-T autosensing (RJ-45), PoE (Power over Ethernet)Ethernet port

Four N connectorsExternal antenna connectors

Hardware

12 V DC, external power adapter (230 V) with bayonet cap. PoE (Power over Ethernet), compliant with IEEE 802.3afPower supply

10 bis 28 V DC input voltage, optionally available: 24 V DC power supply unit LANCOM OAP-320 PSUPower supply

Temperature range -33° to +70 °CEnvironment

Housing

Management and monitoring

Monitoring functions

Declarations of conformity*

Scope of delivery

Support

Options

LANCOM Warranty Advanced Option L

LANCOM Public Spot

Robust metal housing, IP 66 protection rating, ready for wall and pole mounting, 3 LEDs for status display, please note: device must
not be mounted in salt water environments without a suitable protective housing; Dimensions 255 × 250 × 80 mm (length x width x
depth)

LANconfig, WEBconfig, LSR (LANCOM Large Scale Rollout), WLAN controller, LANCOM Layer 2 management (emergency management)Management

Alternative boot configuration, voluntary automatic updates for LCMS and LCOSManagement functions

Two stored firmware versions, incl. test mode for firmware updatesFirmSafe

LANmonitor, WLANmonitor, LSM (LANCOM Large Scale Monitor)Monitoring

Device SYSLOG, SNMPv2c, extensive LOG and TRACE options, PING and TRACEROUTE for checking connections, internal logging buffer
for firewall events

Extensive Ethernet, IP and DNS statistics; SYSLOG error counter, accounting information exportable via LANmonitor and SYSLOGMonitoring statistics

EN 60950-1, EN 301 489-1, EN 301 489-17CE

EN 301 8935 GHz WLAN

EN 300 3282.4 GHz WLAN

IPv6 Ready GoldIPv6

You will find all declarations of conformity in the products section of our website at www.lancom-systems.eu*) Note

Hardware Quick Reference (EN, DE), Installation Guide (DE/EN/FR/ES/IT/PT/NL)Manual

Data medium with management software (LANconfig, LANmonitor, WLANmonitor, LANCAPI) and documentationCD/DVD

Water-resistant, UV-resistant Ethernet PoE cable with water-resistant screw connector, 15mCable

Mounting kit for wall and pole mountingMounting Kit

Four 3 dBi dipole dual-band antennasAntenna

Via Power over Ethernet compliant with IEEE 802.3af, 1 x PoE Injector suppliedPower supply unit

3 years support via hotline and Internet KnowledgeBaseWarranty

Regular free updates (LCOS operating system and LANCOM Management System) via InternetSoftware updates

Option to extend the manufacturer´s warranty from 3 to 5 years, item no. 10712LANCOM Warranty Basic Option L

Option to extend the manufacturer´s warranty from 3 to 5 years and replacement of a defective device on the next working day, item
no. 10717

Hotspot option for LANCOM access points and the LANCOM 17xx series for user authentication (up to 64), versatile access (via voucher,
e-mail, SMS), including a comfortable setup wizard, secure separation of guest access and internal network, item no. 60642

LCOS 9.10

DATASHEET

LANCOM OAP-322

Accessories

LANCOM WLAN controllers

Power over Ethernet Injector

Item number(s)

Gehäusezeichnung

LANCOM WLC-4006+, item no. 62035 (EU), item no. 62036 (UK) and item no. 62037 (US), LANCOM WLC-4025+, item no. 61378,
item no. 61379 and item no. 61384 (US), LANCOM WLC-4100, item no. 61369 (EU) and item no. 61377 (UK), LANCOM WLC Basic
Option for Routers, item no. 61639

AirLancer Extender O-D80g, item no. 61221, AirLancer Extender O-D60a, item no. 61222, AirLancer Extender O-D9a, item no. 61224External antenna, outdoor use

AirLancer cable NJ-NP 3m, item no. 61230, AirLancer cable NJ-NP 6m, item no. 61231, AirLancer cable NJ-NP 9m, item no. 61232Antenna cable

AirLancer Extender SA-5L surge arrestor (2.4 and 5 GHz), to be integrated between Access Point and antenna, item no. 61553Surge arrestor (antenna cable)

AirLancer Extender SA-LAN surge arrestor (LAN cable), item no. 61213Surge arrestor (LAN cable)

LANCOM OAP Ethernet cable (30 m), item no. 61347LAN cable (outdoor)

1-port PoE injector with Gigabit support, integrated power supply, compatible with the standard IEEE 802.3af/at, item no. 61738 (EU)
and 61739 (UK)

The polarization diversity antennas require 2 cables and surge arrestors*) Note

61552LANCOM OAP-382

61691 (UK), Power supply unit for LANCOM OAP-321-3G, LANCOM OAP-3G and LANCOM OAP-322LANCOM OAP-320 PSU

LCOS 9.10

www.lancom-systems.de

LANCOM Systems GmbH I Adenauerstr. 20/B2 I 52146 Würselen I Deutschland I E-Mail [e-mail]

LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. Subject to change without notice. No liability for

technical errors and/or omissions. 10/15