La Crosse Technology WS 9133TWC, WS-9133T-IT, WS-9133T-IT User Manual

WIRELESS 915 MHz WEATHER STATION
g
Contents
Instruction Manual
English 1 French 22 Spanish 43
TABLE OF CONTENTS
Topic Page
Inventory of Contents 2 Features 3 Setting Up 4 Battery Installation 5 Function keys6 LCD Screen and Settings8 Manual Settings9 Alarm setting and snooze 11 Weather forecast icons and tendency 11 Indoor temperature and MIN/MAX records 14 Outdoor temperature and MIN/MAX records 14 Resetting MIN/MAX records 14 915 MHz Reception 15 Mountin Care and Maintenance 17 Specifications 18 Warranty Information 19
INVENTORY OF CONTENTS
1. Wireless Temperature Station
2. Wireless Temperature Sensor (TX37U-IT) and mounting bracket
3. Instruction Manual
16
This product offers:
FEATURES:
The Weather station
Battery compartment
Function
keys
1
INSTANT TRANSMISSION is the state-of-the-art
new wireless transmission technology, exclusively designed and developed by LA
CROSSE TECHNOLOGY. INSTANT TRANSMISSION offers you an im m ed iate
update (every 4 seconds!) of all your outdoor data measured from the transmitters: follow your climatic variations in real-time!
Foldout stand
Hanging hole
Battery compartment cover
Time display (hour and minutes) 12/24 hour display Alarm function with snooze Temperature display in degree Farenheit (ºF) or Celsius (°C) Indoor and outdoor temperature with MIN/MAX records Manual reset of MIN/MAX records Weather forecast with weather tendency indicator Wireless transmission at 915 MHz Signal reception intervals at 4 seconds Low battery indicator Wall mounting or table standing (foldout stand)
The Outdoor Temperature Transmitter
SETTING UP:
Note:
This weather station receives only one outdoor transmitter.
1. First, insert the batteries into the Temperature transmitter. (see “Install and replace batteries in the Temperature transmitter“).
2. Immediately after and within 30 seconds, insert the batteries into Weather station (see “Install and replace batteries in the Weather station”). Once the batteries are in place, all segments of the LCD will
Remote transmission of outdoor temperature to Rain resistant casing
Wall mounting and table-stan ding
2
Temperature Station by 915 MHz signals
3
4
light up briefly. Following the time as 12:00 and the weather icon will be
y
A
y
r
r
r
y
r
y
r
r
displayed. If these are not displayed after 60 seconds, remove the batteries and wait for at least 10 seconds before reinserting them.
3. After inserting the batteries, the Weather station will start receiving data from the transmitter. The outdoor temperature and the signal reception icon should then be displayed on the Weather stat ion. If this does not happen after 3 minutes, the batteries will need to be removed from both units and reset from step 1.
4. In order to ensure sufficient 915 MHz transmission however, this should under good conditions be a distance no more than 100 meters (330 feet) between the final position of the Weather Station and the transmitter (see notes on “Mounting” and “915 MHz Reception”).
HOW TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE STATION
The Weather Station uses 3 x AA, IEC LR6, 1.5V batteries. When batteries
will need to be replaced, the low battery icon will appear on the LCD. To install and replace the batteries, please follow the steps below:
1. Lift up the battery compartment cove r.
2. Insert batteries observing the correct polarity (see marking).
3. Replace compartment cover.
HOW TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER
Note:
In the event of changing batteries in any of the units, all units need to be reset by following the setting up procedures. This is because a security code is assigned by the transmitter at start-up and this code must be received and stored by the Weather station in the first 3 minutes of po wer being supplied to it.
BATTERY CHANGE:
It is recommended to replace the batteries in all units regularly to ensure optimum accuracy of these units (Battery life See Specifications below).
FUNCTION KEYS: Weather station:
The weather station has four easy to use function keys.
Please participate in the preservation of the environment. Return used batteries to an authorized depot.
The Temperature Transmitter uses 2 x AA, IEC LR6,
1.5V battery. To install and replace the batteries, please follow the steps below:
1. Remove the battery compartment cover at the back of the transmitter.
2. Insert the batteries, observing the correct polarity (see marking).
3. Replace the battery compartment cover on the unit.
+ ke
5
LARM key
MIN/MAX RESET key
SET key
Press the key to enter manual setting modes: time, 12/24 hour ti me Stop the alarm
+ key
To make adjustment for various settings Stop the alarm
ALARM key
Enter the alarm setting mode Switch the alarm ON/ OFF Stop the alarm
MIN/MAX RESET key
Press and hold to reset the MIN/MAX temperature records Activate the snooze Exit manual setting modes
SET ke
display, and temperature unit (ºC/ºF) setting
LCD SCREEN AND SETTINGS:
Alarm icon
* When the outdoor signal is successfully received by the Weather Station, this icon will be switched on. (If not successful, the icon will not be shown in LCD) So user can easily see whether the last reception was successful (icon on) or not (icon off).
For a better display clarity, the LCD screen is split int o 3 sections.
Section 1 - TIME AND ALARM
Display of time
Weathe
tendenc
indicato
Low batter
indicato (weathe
station)
Indoo
Temperature
in °C/ °F
MIN/MAX indoo
temperature
6
Time
Weather forecast icon
Low batter y indicator (transmitter) Outdoor Reception Signal icon*
Outdoor Temperature in °C/ °F
MIN/MAX outdoor temperature
7
8
Loading...
+ 4 hidden pages