La Crosse Technology BBB87269 Instruction Manual
Model: BBB87269
Instruction Manual
DC:102015
Atomic Digital Wall Clock
Table of Contents
Welcome ...........................................................................
Get Started ........................................................................
Button Functions ................................................................
Settings: Time, Date, etc. ....................................................
Time Zone Settings and 12/24 Hour Time ...............................
Set Time Alarm ..................................................................
Activate/Deactivate Alarm ....................................................
Snooze ..............................................................................
Reset Button ......................................................................
Care and Maintenance .........................................................
Specifications .....................................................................
Warranty and Support .........................................................
FCC Statement ...................................................................
Canada Statement ..............................................................
1
1
2
3
6
6
6
5
4
5
5
5
7
7
Welcome!
Thank you for purchasing the Atomic Digital Wall Clock, designed for
years of trouble free performance. Please read this important note
about setup. Thank you!
IMPORTANT:
After installing batteries, the clock will look for the Atomic time signal
for 10 minutes. The buttons will not function during the signal search.
Options:
• Hold the Atomic Search button for 5 seconds to stop the
Atomic signal search.
• Manually set the time, date, and time zone.
• The clock will search for the Atomic time signal again after
midnight.
• Press Atomic Search button anytime, to start an Atomic signal
search.
For information about Atomic Time, visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm
Get Started
1. Insert 3 new “C” Alkaline batteries into the clock. Observe the
correct polarity.
2. Wait for the clock to set itself to Eastern time zone (default), then
press the ZONE button to select your time zone.
OR
3. Stop the initial Atomic Time Search and set the time manually.
ALARM
+ C -
+ C - + C -
Page 1 www.lacrossetechnology.com/support BBB87269
Button Functions
ALARM
MODE/SET
Normal Time Display:
• Press and release to enter alarm mode
• Hold 5 seconds to set time
Alarm Mode:
• Hold 5 seconds to set alarm
• Press and release to conrm
ALARM
• Press and release to activate or deactivate
time alarm
+12/24
Normal Time Display:
• Press and release to select 12 hour or 24
hour time format
• Hold 5 seconds to change time zone
Time Set or Alarm Set Mode:
• Press and release to adjust value by 1
• Hold to adjust value quickly
SNOOZE
• When alarm rings, press to activate snooze
MINUS
Time Set or Alarm Set Mode:
• Press and release to adjust value by 1
• Hold to adjust value quickly
Atomic Tower Button
• Hold 5 seconds to start or stop Atomic Time
signal search
RESET
• Press once with a paper clip to return clock
to default settings
Note: When clock is searching for Atomic time and tower icon
is ashing, buttons will not function. Hold the Tower button for
5 seconds to stop the search, so buttons can be used.
BBB87269 www.lacrossetechnology.com/support Page | 2
Loading...