La Crosse Technology 616-143 User Manual
Projection Arm
Rotation
(Front and
Back)
Projection
Lens
BACK VIEW
Snooze/Backlight
Projection
Focus
AC Power Jack
GPU280500150WD00
Buttons
FRONT VIEW
DC: 072915
Model 616-143 www.lacrossetechnology.com/support Page | 1
Model: 616-143
Quick Setup Guide
Atomic Projection Alarm Clock
TX141-Bv2
Outdoor Sensor
Battery
Compartment
2-AA batteries.
Battery Cover
Battery
Compartment
3 “AAA”
Observe the correct
polarity before inserting
the batteries
BOTTOM VIEW
Step 1: Insert the included 5-volt AC power adapter into projection
alarm and then into wall outlet.
Step 2: Insert 3 new “AAA” batteries (not included) into the projection
alarm. Observe the correct polarity.
Step 3: Insert 2 new “AA” batteries (not included) into the TX141-BV2
sensor. Observe the correct polarity.
Note: If the outdoor temperature is not displayed after 3 minutes,
Hold the +/TEMP button to search for the sensor. Press the TX button
on the sensor to send a signal.
1. Hold the SET/°F/°C button to enter time set mode.
2. Use the +/TEMP or -/TIME buttons to adjust values.
Press and hold for fast adjustment.
3. Press the SET/°F/°C button to confirm adjustments and move to
the next item.
Time and Date setting order:
1. WWVB (ON/OFF)
2. Time Zone
3. DST Daylight Saving Time (ON/OFF)
Model 616-143 www.lacrossetechnology.com/support Page | 2
GET STARTED
SET TIME AND DATE
Alarm
Bell Icon
4. 12/24 Hour Time Format
5. Hour
6. Minutes
7. Year
8. Month
9. Date
Press the SET/°F/°C button to exit, or wait 20 seconds without
pressing buttons to return to the normal time display.
FAHRENHEIT/CELSIUS
Press the SET/°F/°C button to select Fahrenheit or Celsius
temperature display.
SET TIME ALARM
1. Hold the ALARM button to enter alarm time set mode.
2. Use the +/TEMP or -/TIME buttons to adjust values.
3. Press the ALARM button to confirm adjustments and move to the
next item.
Alarm Time setting order:
1. Hours
2. Minutes
ACTIVATE / DEACTIVATE TIME ALARM
Press the ALARM button once to view alarm time.
Press the ALARM button again to activate the alarm.
Bell icon appears.
Press the ALARM button again to deactivate the alarm.
The bell icon disappears.
SNOOZE (Silences alarm temporarily)
Press the SNOOZE/LIGHT button to silence alarm for 10
minutes.
Zz will show.
When in snooze mode, press ALARM to stop alarm for one day.
Note: The alarm is crescendo sound. The alarm will sound for 2
minutes and then shut off completely.
Model 616-143 www.lacrossetechnology.com/support Page | 3
Loading...