|
Model: WS-9160U-IT |
|
|
Instruction Manual |
|
|
|
DC: 081815 |
|
WIRELESS THERMOMETER |
|
Time |
|
Hanging |
|
hole |
|
12/24hr |
|
|
|
|
|
|
|
Battery |
Indoor |
|
compartment |
|
2 “AAA” |
|
Temp. |
|
|
|
Alkaline |
|
ºF/ºC |
|
|
|
batteries. |
|
|
|
|
Outdoor |
|
|
Temp. |
|
|
ºF/ºC + |
|
|
Channel |
|
Foldout |
Indicator |
|
|
|
stand |
|
|
|
|
Buttons |
|
|
|
TX29U-IT |
|
|
Temperature |
|
|
Sensor |
|
|
Battery |
|
|
compartment |
|
|
2 “AA” |
|
|
batteries |
|
WS-9160U-IT |
www.lacrossetechnology.com/support |
Page | 1 |
Get Started
Step 1: Insert 2 fresh AA, batteries into the TX29U-IT
sensor according to the polarity marked in the battery compartment.
Step 2: Insert 2 fresh AAA, Alkaline batteries into the wireless thermometer according to the polarity markings.
Step 3: After 5 minutes place sensor outside in a shaded location.
Set 12/24 Hour, Temperature Units, Time
1.Hold the SET button to enter time set mode.
2.Press the + button to adjust values.
3.Press the SET button to confirm adjustments and move to next item.
Settings order:
1.12/24 Hour Format
2.Hour
3.Minutes
Note: 12h = ºFahrenheit & 24h = ºCelsius
Press SET to exit, or wait 30 seconds without pressing buttons to return to the normal time display.
Fahrenheit/Celsius
The temperature is displayed in Fahrenheit when in 12-hour time format and in Celsius in 24 hour timeformat.
1. Hold the SET button to enter time set mode. 2. 12h or 24h will flash.
3. Press the + button to change the time format (temperature display).
4. Press the SET button to confirm.
Note: 12h = ºFahrenheit & 24h = ºCelsius
WS-9160U-IT www.lacrossetechnology.com/support |
Page | 2 |