IPD 1200
Technical Data
IPD Series: Intelligent Power Drive Amplifiers
▸ High power density – 2 x 600 W at 4 ohms
TM
▸ Low mains current draw with proven IDEEA
▸ AES3 and analog inputs – Redundant AES3-analog failover and
link outputs for each type
▸ Integrated DSP – 40 multi-slope parametric equalizers,
adjustable high- and low-pass filters, input and output delays (up
to 2 s. each), crossover with multiple filter types
▸ Networked control – Input mixing and DSP parameters
accessible on IntelliDrive Controller™ touch-based GUI
The IPD Series presents bold new thinking in two compact, powerful and cost-effective intelligent power ampliers. As with all Lab.gruppen
products, the IPD 1200 delivers high sustained power output along with exemplary performance and robust build quality. In addition, the IPD 1200
incorporates a full set of added value features: analog and AES3 digital inputs, on-board DSP (with functionality rivaling high-priced external units),
and Ethernet-based networking for monitoring and control using a FOH computer or – coupled with a WiFi router – wirelessly via an iPad.
technology
Total Input Flexibilit y
With AES3 digital inputs standard, IPD Series ampliers connect
directly to digital console stage boxes, eliminating a D-A/A-D
conversion cycle. AES3 inputs can be set for automatic failover to
analog, and input mixing is available for all four inputs.
Brawn with Brains
The IPD 1200 delivers a robust 2 x 600 W 4 ohms, and couples its
audio muscle to extraordinary intelligence. At the heart of the IPD
platform is a latest-generation DSP engine equipped with up to a total
of 40 real-time, multi-slope parametric EQs along with adjustable gain,
input and output delay, and both high- and low-pass lters of multiple
types adjustable to any frequency. Up to 100 user-dened presets may
be stored on-board.
▸ Wireless control via iPad – Requires connection of WiFi router
▸ Four-channel input mixer
▸ Software congurable limiters (SCVPL
▸ Binding post and Neutrik
▸ Universal power supply: 100 - 240 V at 50 or 60 Hz
®
speakON® connectors
TM
)
Take Control. Anywhere.
All setup parameters for input mixing, DSP features and limiter
setting are accessible on the front panel, along with dedicated mute
buttons. However, most users will take advantage of the advanced,
Ethernet-based networked monitoring and control features. Network
conguration is fast and foolproof, with automatic discovery and
identication of all connected ampliers. The sleek IPD Controller GUI
is designed for touch-based devices, and enables quick grouping
of ampliers along with intuitive setup and preset storage of all DSP
parameters. Simply download the free app* and add a WiFi router for
iPad control anywhere in the venue.
* Availab le late 2013
Applications
• Touring musicians’ and
rental systems
• Portable corporate
AV systems
• Houses of worship
WWW.LABGR U PPEN.COM
• Performing ar ts centres
• Hotels and convention
centres
• Theme park installations
Specifications IPD 1200
General
Numbe r of channels (not b ridgable) 2
Maximum total output power 1200 W
Output voltage 70 V peak / 50 Vr ms / 36.2 dBu
Outpu t current 16 Arms
Max. Outp ut Power (all ch.’s driven)
2 ohms 500 W
4 ohms 600 W
8 ohms 300 W
16 ohms 150 W
Performa nce
THD+N 20 Hz - 20 kHz @ 1 W <0.1%
THD+N @ 1 kHz, 1 dB below clip <0.05%
Output noise -66 dB u
Signal To Noise Ratio 102 dB
Channel separation @ 1 kHz >80 dB
Frequency response (-3 dB) 2 Hz - 42 kHz
Input impedance 18 kOhm
Common Mode Rejection (CMR)
Output impedance
Input sensitivity for maximum output voltage 6 dBu
Maximum analog input level 20 dBu
Gain (al l DSP controls set to 0 d B) 30.2 dB
Mains power
Nominal mains voltage 100 - 240 VAC
Opera ting mai ns voltage 60 - 265 VAC
Standby consumption <6.5 W
Mains connector
Physical
Dimen sions ( Rack ra il - rear panel) W: 483 mm (19”), H: 44 mm (1 U), D: 272 mm (10.7”)
Dimen sions (over all in cl. hand les & rea r support) W: 483 mm (19”), H: 44 mm (1 U), D: 344 mm (13.5”)
Weight 4.6 kg (10.1 lbs)
Finish
Connectors
Analo g input c onnectors pe r chann el 3-pin XLR femal e
Analo g input l ink con nectors per ch annel 3-pin XLR male
AES inpu t conne ctor 3-pin XLR f emale
AES inpu t link co nnecto r 3-pin XLR male
Outpu t conne ctors pe r channel Neutr ik spea kON / Binding po sts, ele ctron icall y balan ced
Network connector RJ45 (Ethernet)
Buttons
Encoder
LED’s
Approvals
>50 dB
25 mOhm
Locking IEC inlet
Black, anodized aluminium front panel. Black/grey steel chassis
Power
Menu
Back
Mute (per channe l)
Power
Adjust/Set
Signal / Mute (per channel)
Limit (per channel)
Power State
CE, UL (ANSI/UL, CAN/CSA), PSE, RCM, CCC, FCC.
All specifications are subject to change without notice.
WWW.LABGR U PPEN.COM
Item no. TDS-IPD1200 - 30.11.2015
Loading...