Küppersbusch EEBD6750.0J User Manual
EEBD6750.0J
User Manual
EN
Steam oven
CONTENTS
Safety information 2
Safety instructions 3
Product description 6
Control panel 7
Before first use 9
Daily use 9
Clock functions 14
Automatic programmes 15
Using the accessories 16
Additional functions 18
Hints and tips 19
Care and cleaning 41
Troubleshooting 43
Technical information 45
Energy efficiency 45
Subject to change without notice.
SAFETY INFORMATION
Before the installation and use of the appliance, carefully read
the supplied instructions. The manufacturer is not responsible
if an incorrect installation and use causes injuries and
damages. Always keep the instructions with the appliance for
future reference.
Children and vulnerable people safety
• This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved.
• Do not let children play with the appliance.
• Keep all packaging away from children.
•
Keep children and pets away from the appliance when it
operates or when it cools down. Accessible parts are hot.
•
If the appliance has a child safety device, we recommend
you activate it.
•
Cleaning and user maintenance shall not be made by
children without supervision.
•
Children of less than 3 years should be kept away unless
continuously supervised.
2
General Safety
• Only a qualified person must install this appliance and
replace the cable.
• Internally the appliance becomes hot when in operation. Do
not touch the heating elements that are in the appliance.
Always use oven gloves to remove or put in accessories or
ovenware.
• Before maintenance cut the power supply.
• Ensure that the appliance is switched off before replacing
the lamp to avoid the possibility of electric shock.
• Do not use a steam cleaner to clean the appliance.
• Do not use harsh abrasive cleaners or sharp metal scrapers
to clean the glass door since they can scratch the surface,
which may result in shattering of the glass.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its Authorised Service Centre or similarly
qualified persons in order to avoid a hazard.
• To remove the shelf supports first pull the front of the shelf
support and then the rear end away from the side walls.
Install the shelf supports in the opposite sequence.
•
Only use the core temperature sensor recommended for this
appliance.
SAFETY INSTRUCTIONS
Installation
WARNING! Only a qualified
person must install this
appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Obey the installation instruction supplied
with the appliance.
• Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
• Do not pull the appliance by the handle.
• Keep the minimum distance from the
other appliances and units.
• Make sure that the appliance is installed
below and adjacent safe structures.
• The sides of the appliance must stay
adjacent to appliances or to units with
the same height.
Electrical connection
WARNING! Risk of fire and
electrical shock.
• All electrical connections should be
made by a qualified electrician.
• The appliance must be earthed.
• Make sure that the electrical information
on the rating plate agrees with the
power supply. If not, contact an
electrician.
3
• Always use a correctly installed
shockproof socket.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to the
mains plug and to the mains cable.
Should the mains cable need to be
replaced, this must be carried out by our
Authorised Service Centre.
• Do not let mains cables touch or come
near the appliance door, especially when
the door is hot.
• The shock protection of live and
insulated parts must be fastened in such
a way that it cannot be removed without
tools.
• Connect the mains plug to the mains
socket only at the end of the installation.
Make sure that there is access to the
mains plug after the installation.
• If the mains socket is loose, do not
connect the mains plug.
• Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
• The electrical installation must have an
isolation device which lets you
disconnect the appliance from the mains
at all poles. The isolation device must
have a contact opening width of
minimum 3 mm.
• This appliance complies with the E.E.C.
Directives.
Use
WARNING! Risk of injury, burns
and electrical shock or
explosion.
• Use this appliance in a household only.
• Do not change the specification of this
appliance.
• Make sure that the ventilation openings
are not blocked.
• Do not let the appliance stay unattended
during operation.
• Deactivate the appliance after each use.
• Be careful when you open the appliance
door while the appliance is in operation.
Hot air can release.
• Do not operate the appliance with wet
hands or when it has contact with water.
• Do not apply pressure on the open door.
• Do not use the appliance as a work
surface or as a storage surface.
• Open the appliance door carefully. The
use of ingredients with alcohol can
cause a mixture of alcohol and air.
• Do not let sparks or open flames to
come in contact with the appliance
when you open the door.
• Do not put flammable products or items
that are wet with flammable products in,
near or on the appliance.
WARNING! Risk of damage to
the appliance.
• To prevent damage or discoloration to
the enamel:
– do not put ovenware or other
objects in the appliance directly on
the bottom.
– do not put aluminium foil directly on
the bottom of the appliance.
– do not put water directly into the hot
appliance.
– do not keep moist dishes and food
in the appliance after you finish the
cooking.
– be careful when you remove or
install the accessories.
• Discoloration of the enamel has no effect
on the performance of the appliance. It
is not a defect in the sense of the
warranty law.
• Use a deep pan for moist cakes. Fruit
juices cause stains that can be
permanent.
• This appliance is for cooking purposes
only. It must not be used for other
purposes, for example room heating.
• Always cook with the oven door closed.
• If the appliance is installed behind a
furniture panel (e.g. a door) make sure
the door is never closed when the
appliance is in operation. Heat and
moisture can build up behind a closed
furniture panel and cause subsequent
4
damage to the appliance, the housing
unit or the floor. Do not close the
furniture panel until the appliance has
cooled down completely after use.
Steam Cooking
WARNING! Risk of burns and
damage to the appliance.
• Released Steam can cause burns:
– Do not open the appliance door
during the steam cooking operation.
– Open the appliance door with care
after the steam cooking operation.
Care and cleaning
WARNING! Risk of injury, fire,
or damage to the appliance.
• Before maintenance, deactivate the
appliance and disconnect the mains
plug from the mains socket.
• Make sure the appliance is cold. There is
the risk that the glass panels can break.
• Replace immediately the door glass
panels when they are damaged. Contact
the Authorised Service Centre.
• Be careful when you remove the door
from the appliance. The door is heavy!
• Clean regularly the appliance to prevent
the deterioration of the surface material.
• Remaining fat or food in the appliance
can cause fire.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal objects.
• If you use an oven spray, obey the safety
instructions on the packaging.
• Do not clean the catalytic enamel (if
applicable) with any kind of detergent.
Internal light
• The type of light bulb or halogen lamp
used for this appliance is only for
household appliances. Do not use it for
house lighting.
WARNING! Risk of electrical
shock.
• Before replacing the lamp, disconnect
the appliance from the power supply.
• Only use lamps with the same
specifications.
Disposal
WARNING! Risk of injury or
suffocation.
• Disconnect the appliance from the mains
supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent
children and pets to get closed in the
appliance.
Service
• To repair the appliance contact an
Authorised Service Centre.
• Use original spare parts only.
5
PRODUCT DESCRIPTION
General overview
21
10
5
4
6
7
8
9
3
5
4
3
2
1
1
Control panel
2
Electronic programmer
3
Water drawer
4
Socket for the core temperature sensor
5
Heating element
6
Lamp
7
Fan
8
Steam generator with cover
9
Shelf support, removable
10
Shelf positions
Accessories
Wire shelf
For cookware, cake tins, roasts.
Baking tray
For cakes and biscuits.
Grill- / Roasting pan
To bake and roast or as a pan to collect fat.
Core temperature sensor
To measure how far the food is cooked.
6
Telescopic runners
For shelves and trays.
Steam set
One unperforated and one perforated food
container.
The steam set drains the condensing water
away from the food during steam cooking.
Use it to prepare food that should not be in
the water during the cooking (e.g.
vegetables, pieces of fish, chicken breast).
The set is not suitable for food that needs
to soak in the water (e.g. rice, polenta,
pasta).
Sponge
For absorbing the remaining water from the
steam generator.
CONTROL PANEL
Electronic programmer
1110987654321
Use the sensor fields to operate the appliance.
Sensor
field
Function Comment
1
- Display Shows the current settings of the appliance.
7
Sensor
field
Function Comment
2
ON / OFF To activate and deactivate the appliance.
3
Heating Functions or Assisted
Cooking
Touch the sensor field once to choose a heating function or the menu: Assisted Cooking. Touch the sensor
field again to switch between the menus: Heating
Functions, Assisted Cooking. To activate or deactivate the light, touch the field for 3 seconds. You can
activate the light also when the appliance is deactivated.
4
Favourite Programme
To save and access your favourite programmes.
5
Temperature selection
To set the temperature or show the current temperature in the appliance. Touch the field for 3 seconds to
activate or deactivate the function: Fast heat up.
6
Down key To move down in the menu.
7
Up key To move up in the menu.
8
OK To confirm the selection or setting.
9
Home key To go back one level in the menu. To show the main
menu, touch the field for 3 seconds.
10
Time and additional functions
To set different functions. When a heating function
operates, touch the sensor field to set the timer or the
functions: Function Lock, Favourite Programme, Heat
+ Hold, Set + Go. You can also change the settings
of the core temperature sensor.
11
Minute Minder To set the function: Minute Minder.
Display
A
DE
B C
A) Heating function
B) Time of day
C) Heat-up indicator
D) Temperature
E) Duration time or end time of a function
8
Other indicators of the display:
Symbol Function
Minute Minder The function operates.
Time of day The display shows the current time.
Duration The display shows the necessary time
for cooking.
End Time The display shows when the cooking
time is complete.
Temperature The display shows the temperature.
Time Indication The display shows how long the heating
function operates. Press and at
the same time to reset the time.
Calculation The appliance calculates the time for
cooking.
Heat-up Indicator The display shows the temperature in
the appliance.
Fast Heat Up Indicator The function is active. It decreases the
heat up time.
Weight Automatic The display shows that the automatic
weight system is active or that weight
can be changed.
Heat + Hold The function is active.
BEFORE FIRST USE
WARNING! Refer to Safety
chapters.
Initial Cleaning
Remove all accessories and removable
shelf supports from the appliance.
Refer to "Care and cleaning"
chapter.
Clean the appliance before first use.
Put the accessories and the removable
shelf supports back to their initial position.
First Connection
When you connect the appliance to the
mains or after the power cut, you have to
set the language, the display contrast, the
display brightness and the time of the day.
1. Press or to set the value.
2. Press
to confirm.
DAILY USE
WARNING! Refer to Safety
chapters.
Navigating the menus
1. Activate the appliance.
9
2. Press or to select the menu
option.
3. Press to move to the submenu or
accept the setting.
At each point you can go back
to the main menu with .
The menus in overview
Main menu
Sym
bol
Menu item Application
Assisted Cooking Contains a list of automatic programmes.
Heating Functions Contains a list of heating functions.
Steam Cleaning Cleaning the appliance with steam.
Basic Settings You can use it to set other settings.
Favourite Programme Contains a list of favourite cooking programmes cre-
ated by the user.
Submenu for: Basic Settings
Sym
bol
Submenu Description
Set Time of Day Sets the current time on the clock.
Time Indication When ON, the display shows the current time when
you deactivate the appliance.
Set + Go When ON, in the Select Options window you can
choose the function: Set + Go.
Heat + Hold When ON, in the Select Options window you can
choose the function: Heat + Hold.
Extra Time Activates and deactivates the time extension func-
tion.
Display Contrast Adjusts the display contrast by degrees.
Display Brightness Adjusts the display brightness by degrees.
Set Language Sets the language for the display.
Buzzer Volume Adjusts the volume of press-tones and signals by
degrees.
Key Tones Activates and deactivates the tone of the touch
fields. It is not possible to deactivate the tone of the
ON / OFF touch field.
10
Sym
bol
Submenu Description
Alarm/Error Tones Activates and deactivates the alarm tones.
Cleaning Assistant Guides you through the cleaning procedure.
Service Shows the software version and configuration.
Factory Settings Resets all settings to factory settings.
Heating Functions
Heating function Application
Full Steam For vegetables, fish, potatoes, rice, pasta or special
side-dishes.
Half Steam + Heat For dishes with a high moisture content and for
poaching fish, custard royale and terrines.
Quarter Steam + Heat To bake bread, roast large pieces of meat or to
warm up chilled and frozen meals.
ECO Steam The ECO functions let you optimize the energy con-
sumption during cooking. It is necessary to set the
cooking time first. To get more information about the
recommended settings, refer to the cooking tables
with the equivalent function.
Moist Fan Baking To save energy when you bake and cook dry baked
goods. Also to bake baked goods in tins on 1 shelf
position. This function was used to define the energy
efficiency class acc. EN50304.
True Fan Cooking To bake on up to 3 shelf positions at the same time
and to dry food. Set the temperature 20 - 40 °C lower than for the function: Conventional Cooking.
Pizza Setting To bake food on 1 shelf position for a more intensive
browning and a crispy bottom. Set the temperature
20 - 40 °C lower than for the function: Conventional
Cooking.
Slow Cooking To prepare tender, succulent roasts.
Conventional Cooking To bake and roast food on 1 shelf position.
11
Heating function Application
Frozen Foods To make your convenience food like e.g. French
Fries, Wedges, spring rolls crispy.
Turbo Grilling To roast larger meat joints or poultry with bones on 1
shelf position. Also to make gratins and to brown.
Fast Grilling To grill flat food in large quantities and to toast bread.
Grilling To grill flat food and to toast bread.
Keep Warm To keep food warm.
Defrost To defrost frozen food.
Bottom Heat To bake cakes with crispy bottom and to preserve
food.
Dough Proving For controlled rising of yeast dough before baking.
Bread Baking To bake bread.
Au Gratin For dishes such as lasagna or potato gratin. Also to
gratinate and brown.
Preserving To make vegetable preserves such as pickles.
Drying To dry sliced fruit (e.g. apples, plums, peaches) and
vegetables (e.g. tomatoes, zucchini, mushrooms).
Plate Warming To preheat your plate for serving.
Steam Regenerating To reheat already cooked food directly on a plate.
ECO Roasting The ECO functions let you optimize the energy con-
sumption during cooking. It is necessary to set the
cooking time first. To get more information about the
recommended settings, refer to the cooking tables
with the equivalent function.
12
Activating a heating function
1. Activate the appliance.
2. Select the menu: Heating Functions.
3. Press to confirm.
4. Set a heating function.
5. Press to confirm.
6. Set the temperature.
7. Press
to confirm.
Steam cooking
The water drawer cover is in the control
panel.
WARNING! Do not put water
directly into the steam
generator.
Use only water. Do not use
filtered (demineralised) or
distilled water. Do not use other
liquids. Do not put flammable or
alcoholic liquids into the water
drawer.
1.
Prepare the food in the correct
cookware.
2. Press the cover of the water drawer to
open it.
3. Fill the water drawer with 800 ml of
water.
The water supply is sufficient for
approximately 50 minutes.
4. Push the water drawer to its initial
position.
5. Activate the appliance.
6. Select a steam heating function and the
temperature.
7. If necessary, set the function Duration
or End Time .
The first steam shows after
approximately 2 minutes. An acoustic
signal sounds when the appliance is at
approximately the set temperature.
When the steam generator is
empty, an acoustic signal
sounds.
The signal sounds at the end of the cooking
time.
8. Deactivate the appliance.
9. Empty the water drawer after the steam
cooking is completed.
CAUTION! The appliance is
hot. There is a risk of burns.
Be careful when you empty
the water drawer.
When the appliance cools down, soak up
all remaining water from the steam
generator with the sponge. If necessary,
clean the steam generator with some
vinegar. Let the appliance dry fully with the
door open.
Heat-up indicator
When you activate a heating function, the
bar on the display comes on. The bar
shows that the temperature increases.
Fast Heat Up Indicator
This function decreases the heat-up time.
To activate the function, hold
for 3
seconds. The heat-up indicator alternates.
Residual heat
When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
13
CLOCK FUNCTIONS
Clock functions table
Clock function Application
Minute Minder To set a countdown (max. 2 h 30 min). This
function has no effect on the operation of the
appliance. You can also activate it when the
appliance is deactivated.
Use to activate the function. Press or
to set the minutes and to start.
Duration To set the length of an operation (max. 23 h 59
min).
End Time To set the switch-off time for a heating function
(max. 23 h 59 min).
If you set the time for a clock function, the
time starts to count down after 5 seconds.
If you use the clock functions:
Duration, End Time, the
appliance deactivates the
heating elements after 90 % of
the set time. The appliance uses
the residual heat to continue the
cooking process until the time
ends (3 - 20 minutes).
Setting the clock functions
• Before you use the functions:
Duration, End Time, you
must set a heating function
and temperature first. The
appliance deactivates
automatically.
• You can use the functions:
Duration and End Time at the
same time if you want to
automatically activate and
deactivate the appliance on a
given time later.
• The functions: Duration and
End Time do not work when
you use the core temperature
sensor.
1. Set a heating function.
2. Press again and again until the
display shows the necessary clock
function and the related symbol.
3. Press or to set the necessary
time.
4. Press
to confirm.
When the time ends, an acoustic signal
sounds. The appliance deactivates. The
display shows a message.
5. Press a sensor field to stop the signal.
Heat + Hold
Conditions for the function:
• The set temperature is more than 80 °C.
• The function: Duration is set.
The function: Heat + Hold keeps prepared
food warm at 80 °C for 30 minutes. It
activates after the baking or roasting
procedure ends.
You can activate or deactivate the function
in the menu: Basic Settings.
1.
Activate the appliance.
2. Select the heating function.
3. Set the temperature above 80 °C.
4. Press
again and again until the
display shows: Heat + Hold.
5. Press to confirm.
14
When the function ends, an acoustic signal
sounds.
The function stays on if you change the
heating functions.
Extra Time
The function: Extra Time makes the heating
function continue after the end of Duration.
Applicable to all heating
functions with Duration or
Weight Automatic.
Not applicable to heating
functions with the core
temperature sensor.
1. When the cooking time ends, an
acoustic signal sounds. Press a sensor
field.
The display shows the message.
2. Press to activate or to cancel.
3. Set the length of the function.
4. Press .
AUTOMATIC PROGRAMMES
WARNING! Refer to Safety
chapters.
Assisted Cooking with Recipe
Automatic
This appliance has a set of recipes you can
use. The recipes are fixed and you cannot
change them.
1. Activate the appliance.
2. Select the menu: Assisted Cooking.
Press
to confirm.
3.
Select the category and dish. Press
to confirm.
4.
Select a recipe. Press
to confirm.
When you use the function:
Manual, the appliance uses the
automatic settings. You can
change them as with other
functions.
Assisted Cooking with Weight
Automatic
This function automatically calculates the
roasting time. To use it, it is necessary to
input the food weight.
1. Activate the appliance.
2. Select the menu: Assisted Cooking.
Press
to confirm.
3. Select the category and dish. Press
to confirm.
4. Select the function: Weight Automatic.
Press to confirm.
5. Touch or to set the food weight.
Press
to confirm.
The automatic programme starts.
6. You can change the weight at any time.
Press
or to change the weight.
7.
When the time ends, an acoustic signal
sounds. Press a sensor field to
deactivate the signal.
With some programmes turn
over the food after 30 minutes.
The display shows a reminder.
15
Loading...