Karcher K 4.650 User Manual

K 4.650

Operating Instructions

Before first use of the unit
Please read these Operat­ing Instructions and act in
accordance with them

Register and win!

www.kaercher.com

59639020 (11/10)

234

Contents

General information . . 6

Proper Use . . 6
Environmental protection . . 6
Warranty . . 6
Symbols in the operating instructions . . 6
Symbols on the machine . . 6

Safety instructions . . 7

Safety Devices . . 8
Prerequisites for the appliance's stability . . 8

Operation . . 9

Scope of delivery . . 9
Description of the Appliance . . 9
Before Startup . . 9
Water supply . 10
Start up . 11
High pressure operation . 11
Working with detergent . 12
Interrupting operation . 12
Finish operation . 12

Transport . 12

When transporting by hand . 12
When transporting in vehicles . 12

Storage . 13

Storing the Appliance . 13
Frost protection . 13

Maintenance and care . 13

Maintenance . 13
Care . 13
Spare parts . 13

Troubleshooting . 14

Technical specifications . 14

– 5

General information

Dear Customer,

Please read and comply with

these original instructions prior
to the initial operation of your appliance and
store them for later use or subsequent own­ers.

Proper Use

This high-pressure cleaner is designed for
domestic use only:

– to clean machines, vehicles, buildings,

tools, facades, terraces, garden equip­ment etc. using a high-pressure water
jet (and detergents if required).

– with accessories, replacement parts

and detergents approved by KÄRCH­ER. Observe the instructions provided
with these detergents.

Environmental protection

The packaging material can be recy-

cled. Please do not place the packag­ing into the ordinary refuse for disposal, but
arrange for the proper recycling.

Old appliances contain valuable ma-

terials that can be recycled. Please

arrange for the proper recycling of old
appliances. Please dispose your old appli­ances using appropriate collection sys­tems.

Notes about the ingredients (REACH)

You will find current information about the
ingredients at:

http://www.karcher.de/de/unternehmen/
umweltschutz/REACH.htm

Warranty

The warranty terms published by the rele­vant sales company are applicable in each
country. We will repair potential failures of
your appliance within the warranty period
free of charge, provided that such failure is
caused by faulty material or defects in man­ufacturing. In the event of a warranty claim
please contact your dealer or the nearest
authorized Customer Service centre.
Please submit the proof of purchase.
(See address on the reverse)

Symbols in the operating instruc-

tions

 Danger

Immediate danger that can cause severe
injury or even death.

몇 Warning

Possible hazardous situation that could
lead to severe injury or even death.

Caution

Possible hazardous situation that could
lead to mild injury to persons or damage to
property.

Symbols on the machine

– High-pressure jets can be

dangerous if improperly
used. The jet must not be
directed at persons, ani­mals, live electrical equipment or at the
appliance itself.

– Frost can destroy the not completely

drained appliance. Store the appliance
in a frost resistant room during winter.

– 6

Safety instructions

 Danger

 Never touch the mains plug and the

socket with wet hands.

 The appliance must not be used if the

power cord or important parts of the ap­pliance, e.g. high-pressure hoses, trig­ger gun or safety devices are damaged.

 Check the power cord and mains plug

for damage before every use. If the
power cord is damaged, please arrange
for it to be replaced immediately by an
authorised repair agent or a skilled
electrician

 Check the high-pressure hose for dam-

age before every use. Please arrange
for the immediate replacement of a
damaged high-pressure hose.

 The appliance may not be used in areas

where a risk of explosion is present.

 If the appliance is used in hazardous ar-

eas (e.g. filling stations) the corre­sponding safety provisions must be
observed.

 High-pressure jets can be dangerous if

improperly used. The jet must not be di­rected at persons, animals, live electri­cal equipment or at the appliance itself.

 The high-pressure jet must not be di-

rected at other persons or directed by
the user at him/herself to clean clothing
or footwear.

 Never use the appliance to clean ob-

jects containing hazardous substances
(e.g. asbestos).

 Vehicle tyres or tyre valves are suscep-

tible to damage from the high-pressure
jet and may burst. The first indication of
this is a discolouration of the tyre. Dam­aged vehicle tyres/tyre valves are high­ly dangerous. Ensure that a distance of
at least 30 cm is observed when clean­ing with the jet!

 Risk of explosion!

Do not spray flammable liquids.

Never draw in fluids containing solvents
or undiluted acids and solvents! This in­cludes petrol, paint thinner and heating
oil. The spray mist thus generated is
highly inflammable, explosive and poi­sonous. Do not use acetone, undiluted
acids and solvents as they are damag­ing to the materials from which the ap­pliance is made.

몇 Warning

 The mains plug and the coupling of an

extension cable must be watertight and
must never lay in the water.

 Unsuitable extension cables can be

hazardous. Only use extension cables
outdoors which have been approved for
this purpose and labelled with a suffi­cient cable cross-section: 1 - 10 m: 1.5

2

mm

; 10 - 30 m: 2.5 mm

 Always fully unroll electrical cables from

the cable drum.

 High-pressure hoses, fixtures and cou-

plings are important for the safety of the
appliance. Only use high-pressure hos­es, fixtures and couplings recommend­ed by the manufacturer.

 This appliance is not intended for use

by persons with reduced physical, sen­sory or mental capabilities.

The appliance must not be operated by
children or persons who have not been
instructed accordingly.

Children should be supervised to pre­vent them from playing with the appli­ance.

Keep packaging film away from children

- risk of suffocation!

 The operator must use the appliance

correctly. When working with the appli­ance, he must consider the local condi­tions and pay due care and attention to
other persons, in particular children,
who are nearby.

2

– 7

 Do not use the appliance when there

are other persons around unless they
are also wearing safety equipment.

 Wear protective clothing and safety

goggles to protect against splash back
containing water or dirt.

Caution

 In case of extended downtimes, switch

the appliance off at the main switch / ap­pliance switch or remove the mains
plug.

 Do not operate the appliance at temper-

atures below 0 °C.

 Observe a distance of at least 30 cm

when using the jet to clean painted sur­faces to avoid damaging paintwork.

 Never leave the appliance unattended

when it is in operation.

 Make sure that the power cable or ex-

tension cables are not damaged by run­ning over, pinching, dragging or similar.
Protect the power cable from heat, oil,
and sharp edges.

 All current-conducting parts in the work-

ing area must be protected against jet
water.

 The appliance may only be connected

to an electrical supply which has been
installed in accordance with IEC 60364.

 The appliance may only be connected

to alternating current. The voltage must
correspond with the type plate on the
appliance.

 For safety reasons, we recommend that

you operate the appliance only via a
earth-leakage circuit breaker (max.
30 mA).

 Cleaning operations which produce oily

waste water, e.g. engine washes, un­derbody washes, may only be carried
out using washing stations equipped
with an oil separator.

 This appliance was designed to be

used with detergents which are sup­plied or recommended by the manufac­turer. The use of other detergents or

chemicals may compromise the safety
of the appliance.

Safety Devices

Caution

Safety devices protect the user and must
not be modified or bypassed.

Power switch

The appliance switch prevents unintention­al operation of the appliance.

Lock trigger gun

This lock locks the lever of the trigger gun
and prevents the inadvertent start of the ap­pliance.

Overflow valve with pressure switch

The overflow valve prevents the permissi­ble working pressure from being exceeded.
If the lever on the trigger gun is released
the pressure switch turns off the pump, the
high-pressure jet is stopped. If the lever is
pulled the pump is turned on again.

Prerequisites for the appliance's

stability

Caution

Create stability for the appliance prior to all
work on or with the appliance to prevent ac­cidents or damage.

– The stability of the appliance is warrant-

ed when it is placed onto an even sur­face.

– 8

Operation

Scope of delivery

The scope of delivery of your appliance is il­lustrated on the packaging. Check the con­tents of the appliance for completeness
when unpacking.
In the event of missing accessories or any
transport damage, please contact your
dealer.

Description of the Appliance

Illustrations on fold-out page!

1 Coupling element for water

connection
2 Water connection with integrated sieve
3 Appliance switch "0/OFF“/ „I/ON“
4 High pressure hose
5 Dosage regulator for detergent
6 Storage for trigger gun
7 High-pressure hose drum
8 Transport handle
9 Hand crank for hose drum
10 Storage of detergent reservoir with de-

tergent connection
11 Storage for accessories
12 Storage hook for mains connection ca-

ble
13 Mains cable with mains plug
14 Detergent reservoir with locking lid
15 Wheels
16 Trigger gun
17 Lock trigger gun
18 Key to detach the high pressure hose

from the trigger gun
19 Spray lance with pressure regulation

(Vario Power)
20 Spray lance with Dirtblaster

Special accessories

Special accessories expand the possibili­ties of using your appliance. Please contact
your KÄRCHER dealer for further informa­tion.

Before Startup

Mount loose parts delivered with appliance
prior to start-up.

Install wheels

 Illustration

Push the wheels into the intake and se­cure with the enclosed plugs, watch for
positioning of plug.

Install the storage for hand-spray gun

 Illustration

Place the bottom holder into the recess­es and push forward until it audibly
locks in.

Insert the top holder and push down all
the way.

Install the storage hook for the mains
connection cable

 Illustration

Press in the storage hook and lock it
into the top position.

Install the transport handle

You will need the 2 included screws as well
as a Philips screwdriver PH 2.
 Illustration

Slide the transport handle into the guide
and secure it with 2 screws.

Install the dosage regulator for detergent

You will need the 2 included screws as well
as a Philips screwdriver PH 2.
 Illustration

Insert both detergent hoses onto the
hose fittings.

Install the dosage regulator and con­nect using 2 screws.

Note: During installation you must
make sure that the tongues of the dos­age regulator match up with the intend­ed recesses in the casing.

– 9

Install the high pressure hose drum

 Illustration

Slide the free end of the coiled high

pressure hose through the recesses on

the dosage regulator.

Insert the hose drum into the intakes on

the transport handle.

Insert the axle of the hand crank into the

guides.

Install the fixating plate and secure it

using 2 screws.

Press the connecting fitting from the

short high pressure hose into the brass

intake, secure with clamps.

Note: Make sure the connection nipple

is aligned correctly.

Connect the high pressure hose to the
hand spray gun

 Illustration

Push the high pressure hose into the

trigger gun until it locks audibly.

Note: Make sure the connection nipple

is aligned correctly.

Check the secure connection by pulling

on the high pressure hose.

Water supply

몇 Warning

According to the applicable regula­tions, the appliance must never be
used on the drinking water supply
without a system separator. Use a
suitable system separator manufactured by
KÄRCHER; or, as an alternative, a system
separator as per EN 12729 Type BA. Water
flowing through a system separator is con­sidered non-drinkable.

Caution

Always connect the system separator to
the water supply, never directly to the appli­ance!

Note: Impurities in the water can damage
the high-pressure pump and accessories.
For protection, the use of the KÄRCHER
water filter (optional accessory, order no.

4.730-059) is recommended.

Water supply from mains

Observe regulations of water supplier.
For connection values, see type plate/tech­nical data.
 Use a fibre-reinforced water hose (not

included) with a standard coupling.
(Minimum diameter 1/2 inch (13 mm),
minimum length 7.5 m).

 Illustration

Screw the supplied coupling element to
the water connection on the appliance.

Push the water supply hose onto the
coupling unit, then connect it to the wa­ter supply.

How to draw water from a bucket when
using a KÄRCHER Pressure Cleaner

KÄRCHER recommends using the suction
hose accessory (sold separately) Order no.

9.505-779.0.

STEP 1:

 Connect the suction hose to the water

inlet on the pressure cleaner and drop
the other end into a bucket.

Tip: If you are not using this accessory, coil
a hose into the bucket and ensure that you
only use a standard hose clamp to connect
to the pressure washer.

CLICK FITTINGS MUST NOT BE USED!

STEP 2:

 Fill up your bucket with water.

– 10

STEP 3:

 Connect the KÄRCHER power cord to

an electricity source and turn on at pow-

erpoint. Make sure the high pressure

nozzle is not connected and turn the

unit on at the ON/OFF switch. Press the

trigger on the gun - the unit is ready for

use once there is a constant water sys-

tem.

STEP 4:

 Connect the high pressure nozzle and

press the hand trigger to begin clean-

ing.

Start up

Caution

Dry runs lasting longer than two minutes
lead to damages to the high pressure
pump. If the appliance does not build up
pressure within two minutes, switch it off
and proceed as instructed in the Chapter
"Troubleshooting".

 Illustration

Push the spray lance into the trigger

gun and fasten it by turning it through

90°.
 Illustration

Unwind the high pressure hose from the

hose drum. Hold on to the transport

handle during this procedure.

Note: If the hand crank is in its secured
position, fold it up first.

 Completely open the water tap.
 Insert the mains plug into the socket.
 Turn on the appliance “I/ON”.

High pressure operation

몇 Danger

The trigger gun is subjected to a recoil force
when the water jet is discharged. Make
sure that you have a firm footing and are
also holding the trigger gun and spray lance
firmly.

Caution

Prior to cleaning, make sure that the high
pressure is placed safely on level ground.
Wear protective goggles and protective
clothing during the cleaning process.

 Unlock the lever on the trigger gun.
 Pull on the lever of the trigger gun; the

device will switch on.

Note: Release the lever of the trigger gun;
the device will switch off again. High pres­sure remains in the system.

Spray lance with pressure regulation

Carrying out the most common cleaning
tasks. The work pressure can be stageless­ly regulated between "Min" and "Max".

 Release the lever on the trigger gun.
 Turn the spray lance to the desired po-

sition.

Note: Suitable for working with detergent;
for this, turn the spray lance to the "Mix" po­sition.

Spray lance with Dirtblaster

For particularly dirty items or areas.

Caution

Car tyres, paint or sensitive surfaces such
as wood should not be cleaned with the dirt
blaster, as there is a risk of damage.

– Not suitable for use with detergents.

– 11

Working with detergent

Please use exclusively KÄRCHER deter­gents and care products to carry out the re­spective cleaning task, as these were
specifically developed for your appliance.
The use of other detergents and care prod­ucts may lead to premature wear and can
invalidate your warranty claims. Please ob­tain information at your local dealer or re­quest information directly from KÄRCHER.
Notes regarding the detergent: The most
commonly use detergents can be pur­chased ready to use in their detergent res­ervoirs with locking lids. This will make the
pesky refilling and filling processes redun­dant.
 Illustration

Remove the lid from the detergent res-

ervoir and press the detergent reservoir

into the detergent connection with the

opening facing down.
 Illustration

Adjust the suction volume of the deter-

gent solution by means of the dosage

regulator for detergents.
 Use spray lance with pressure regula-

tion (Vario Power).
 Turn the spray lance to "Mix" position.

Note: This will mix the detergent with

the water stream.
Note: If required, the washing brushes can

be used to work with detergent.

Recommended cleaning method

 Spray the detergent sparingly on the

dry surface and allow it to react, but not

to dry.
 Spray off loosened dirt with the high-

pressure jet.

Interrupting operation

 Release the lever on the trigger gun.
 Lock the lever on the trigger gun.
 During longer breaks (more than 5 min-

utes), also turn the appliance off using

the "0/OFF" switch.
 Insert the trigger gun in its holder.

Finish operation

Caution

Only separate the high-pressure hose from
the trigger gun or the appliance while there
is no pressure in the system.

 Remove the detergent reservoir from

the intake and close it with the lid. To
store, place into the intake rotated by
180°.

 Release the lever on the trigger gun.
 Turn off the appliance "0/OFF".
 Turn off tap.
 Detach the appliance from the water

supply.
Caution: When disconnecting the sup-

ply or high pressure hose, warm water
may leak from the connections after op­eration.

 Press the lever on the trigger gun to re-

lease any remaining pressure in the
system.

 Lock the lever on the trigger gun.
 Pull out the mains plug.

Transport

Caution

In order to prevent accidents or injuries,
keep in mind the weight of the appliance
during transport (see Specifications).

When transporting by hand

 Lift appliance by the carrying handle

and carry it.

 Pull the appliance by its transport han-

dle.

When transporting in vehicles

 Prior to horizontal transport: Remove

the detergent reservoir from the intake
and close it with the lid.

 Secure the appliance against shifting

and tipping over.

– 12

Storage

Maintenance and care

Caution

In order to prevent accidents or injuries,
keep in mind the weight of the appliance
when selecting a storage location for it (see
Specifications).

Storing the Appliance

 Park the machine on an even surface.
 Illustration

Wind the entire high pressure hose onto

the hose drum by rotating the hand

crank counter-clockwise.
 Insert the hand spray gun with the spray

lance into the holder for the hand spray

gun.
 Stow away the mains cable and acces-

sory at the machine. Store the appli-

ance in a dry room.

Frost protection

Caution

Protect the appliance and its accessories
against frost.

The appliance and its accessories can get
destroyed through frost if there are any wa­ter residues in them. To avoid damage to
them:
Completely drain all water from the appli­ance:
 Detach the appliance from the water

supply.
 Detach spray lance from the trigger

gun.
 Switch the appliance on ("I/ON“), press

the trigger gun lever until no further wa-

ter is discharged (approx. 1 min).

 Turn off the appliance.
 Store the appliance and the entire ac-

cessories in a frost-safe room.

 Danger

Turn off the appliance and remove the
mains plug prior to any care and mainte­nance work.

Maintenance

The appliance is maintenance-free.

Care

Prior to longer periods of storage, e.g. in
the winter:
 Completely drain all water from the ap-

pliance:
(for a description, see section on "Frost

protection")

 Illustration

Pull out the sieve in the water connec­tion using flat-nose pliers and clean un­der running water.

Spare parts

Use only original KÄRCHER spare parts.
You will find a list of spare parts at the end
of these operating instructions.

– 13

Troubleshooting

You can rectify minor faults yourself with
the help of the following overview.
If in doubt, please consult the authorized
customer service.

 Danger

Turn off the appliance and remove the
mains plug prior to any care and mainte­nance work.
Repair works may only be performed by the
authorized customer service.

Appliance is not running

 Pull on the lever of the trigger gun; the

device will switch on.
 Check whether the voltage indicated on

the type plate corresponds to the volt-

age of the mains supply.
 Check the mains connection cable for

damages.

Pressure does not build up in the appli­ance

 Check setting at the spray lance.
 Remove air from appliance before oper-

ation.

Switch on the appliance without con-

nection the HP hose (max. 2 minutes)

and run it until the water discharging

from the HP outlet is free of bubbles.

Switch off appliance and reconnect HP

hose.

 Check the water supply.
 Pull out the sieve in the water connec-

tion using flat-nose pliers and clean un-

der running water.

Appliance does not start, motor hums

Cause: Voltage reduction due to weak
mains supply or when using an extension
cable.

 When switching on, first pull the lever of

the trigger gun and then switch the ap-

pliance switch to "I/ON".

Strong pressure fluctuations

 Clean high-pressure nozzle: Remove

dirt and debris from the nozzle bore, us-

ing a needle and rinse through with wa­ter from the front.

 Check water flow quantity.

Appliance is leaking

 Slight leakage from the appliance pump

is normal. If the leakage increases con­tact the authorized customer service.

No detergent infeed

 Use spray lance with pressure regula-

tion (Vario Power).
Turn the spray lance to "Mix" position.

 Check the settings at the dosage regu-

lator for detergent.

 Check the detergent suction hose for

kinks.

Technical specifications

Power connection

Voltage
1~50 Hz

Connected load 1,9 kW
Mains fuse (slow-blow) 10 A
Protective class I
Protection class IP X5

Water connection

Max. feed temperature 40 °C
Min. feed volume 10 I/min
Max. feed pressure 0,8 MPa
Max. Suction height 0,5 m

Performance data

Working pressure 12 MPa
Max. permissible pressure 13 MPa

Water flow rate 6,7 I/min
Detergent flow rate 0 - 0,3 I/min

Subject to technical modifications!

240 V

1885 PSI

– 14

Notes:

A

Alfred Kärcher Ges.m.b.H.
Lichtblaustraße 7
1220 Wien

[phone]

☎

AUS

Kärcher Pty. Ltd.
40 Koornang Road
Scoresby VIC 3179

(03) 9765 - 2300

☎

B / LUX

Kärcher N.V.
Industrieweg 12
2320 Hoogstraten

B: 0900 10027

☎

LUX: 0032 900 10027

BR

Kärcher Indústria e Comércio Ltda.
Av. Prof. Benedicto Montenegro 419
CEP 13.140-000 - Paulínia - SP

0800 176 111

☎

CDN

Kärcher Canada Inc.
6975 Creditview Road Unit #2
Mississauga, Ontario L5N 8E9

1-800-465-4980

☎

CH

Kärcher AG
Industriestraße 16
8108 Dällikon

0844 850 863

☎

CZ

Kärcher spol s r.o.
Modletice č.p. 141
251 01 Říčany u Prahy

0323 606 014

☎

D

Alfred Kärcher GmbH & Co. KG
Service-Center Gissigheim
Im Gewerbegebiet 2
97953 Königheim-Gissigheim

[phone]

☎

DK

Kärcher Rengøringssystemer A/S
Gejlhavegård 5
6000 Kolding

70 206 667

☎

E

Kärcher S.A.
Pol. Industrial Font del Radium
Calle Doctor Trueta 6-7
08400 Granollers (Barcelona)

902 170 068

☎

F

Kärcher S.A.S.
5 Avenue des Coquelicots
Z.A. des Petits Carreaux
94865 Bonneuil-sur-Marne

(01) 43 996 770

☎

FIN

Kärcher OY
Yrittäjäntie 17
01800 Klaukkala

0207 413 600

☎

GB

Kärcher(UK) Limited
Kärcher House
Beaumont Road
Banbury
Oxon, OX16 1TB

01295 752 200

☎

GR

Kärcher Cleaning Systems A.E.
31-33, Nikitara str. &
Konstantinoupoleos str.
13671 Acharnes

210 - 2316 153

☎

H

Kärcher Hungária Kft
Tormásrét ut 2.
2051 Biatorbágy

[phone]

☎

HK

Kärcher Limited
Unit 10, 17/F.
APEC Plaza
49 Hoi Yuen Road
Kwun Tong, Kowloon

[phone]

☎

I

Kärcher S.p.A.
Via A.Vespucci 19
21013 Gallarate (VA)

848 - 99 88 77

☎

IRL

Karcher Limited
12 Willow Business Park
Nangor Road
Clondalkin Dublin 12

(01) 409 77 77

☎

KOR

Karcher Co. Ltd. (South Korea)
Youngjae B/D, 50-1, 51-1
Sansoo-dong, Mapo-ku
Seoul 121-060

032-465-8000

☎

MAL

Karcher Cleaning Systems Sdn. Bhd.
No. 8, Jalan Serindit 2
Bandar Puchong Jaya
47100 Puchong, Selangor

[phone]

☎

MEX

Karcher México, SA de CV
Av. Gustavo Baz No. 29-C
Col. Naucalpan Centro
Naucalpan, Edo. de México
C.P. 53000 México

01 800 024 13 13

☎

N

Kärcher AS
Stanseveien 31
0976 Oslo

24 17 77 00

☎

NL

Kärcher BV
Postbus 474
4870 AL Etten-Leur

0900-33 444 33

☎

NZ

Karcher Limited
12 Ron Driver Place
East Tamaki, Auckland

[phone]

☎

P

Neoparts - Com. e Ind. Automóvel, S.A.
Av. Infante D. Henrique, Lote 35
1800-218 Lisboa

21 8558300

☎

PL

Kärcher Sp. z o.o.
Ul. Stawowa 140
31-346 Kraków

[phone]

☎

PRC

Kärcher Cleaning Systems Co., Ltd.
Part B, Building 30,
No. 390 Ai Du Road
Shanghai Waigaoquiao 200131

[phone]

☎

RO

Karcher Romania s.r.l.
Sos. Odaii Nr. 439
013606 Bucureşti

0372 709 001

☎

RUS

OOO«epxep»
109147,Moca
y.Taaca,.34,cp.3

[phone]

☎

S

Kärcher AB
Tagenevägen 31
42502 Hisings-Kärra

[phone]

☎

SGP

Karcher Asia Pacific Pte. Ltd.
5 Toh Guan Road East
#01-00 Freight Links
Express Distripark
Singapore 608831

6897-1811

☎

SK

Kärcher Slovakia, s.r.o.
Beniakova 2
94901 Nitra

037 6555 798

☎

TR

Kärcher Servis Ticaret A.S.
9 Eylül Mahallesi
307 Sokak No. 6
Gaziemir / Izmir

[phone]

☎

TWN

Karcher Limited
5F/6. No.7
Wu-Chuan 1st Rd
Wu-Ku Industrial Zone
Taipei County

[phone]

☎

UA

Kärcher Ukraine
Kilzeva doroga, 9
03191, Kyiv

(044) 594 75 75

☎

UAE

Karcher FZE
Jebel Ali Free Zone
RA 8, XB 1, Jebel Ali, Dubai

[phone]

☎

USA

Alfred Karcher, Inc
2170 Satellite Blvd
Suite 350
Duluth, GA 30097

678-935-4545; 877-527-2437

☎

ZA

Kärcher (Pty.) Limited
144 Kuschke Street
Meadowdale
Edenvale 1614

[phone]

☎

08/2009