Kyocera TASKalfa 552ci SERVICEBULLETIN 2MV-002

Service Bulletin

Page 1/1

C152 / SB 2MV-002

SB Number:

Subject:

SB 2MV-002

Rear cover may be deformed due to a screw behind it

Creation Date: 02/08/2012

Model: TASKalfa2550ci

Content of changes

To prevent the rear cover from bending (Parts cover rear assy E SP) due to the screw behind the cover, a hole has
been added to the rear cover and a metal plate has been added to secure the srew to the left rear frame.
The metal plate will not be supplied as a separate part.
To cover the added hole, afx the label cover top to the hole. Clean the surface beneath the label cover top with
alcohol rst.

Added metal plate

Sectional view of the rear cover

Parts

No. Old Parts

No.

1 302MV94490

2MV94490

2 ------------ 303LT04120

New Parts
No.

302MV94491
2MV94491

3LT04120

Added hole to the rear cover

Label cover top specications

Diameter: 10mm
Thickness: 0.025mm

Description Q’TY Interchange-

ability

Old New Old New

PARTS COVER REAR ASSY E SP 1 1 O X

LABEL COVER TOP - 1 - X

Classication

Field measure When installing the latest type of the rear cover (Parts cover rear assy E SP), clean the hole with

Entire stock rework

alcohol and afx the label cover top to the hole.

KDIS Service Department, KYOCERA Document Solutions Europe B.V.

In-eld modication at next visit

In-eld modication by case

X

No modication necessary