Kyocera TASKalfa 552ci Servicebulletin 2KY 002

Service Bulletin

SB Number:

Subject:

SB 2KY-002

Firmware upgrade

Creation Date: 25/08/2010

Model: TASKalfa552ci

1. Added support for the data security kit (E).

2. Maintenance mode U464.

3. Error code C6020.

4. Error code C6130.

5. KPDL error.

6. Sort order at the fax box.

Firmware

Type Upgrade Pack Version Remarks

MAIN FRAME 2KY_V2.00E

Software MAIN 2KY_2F00.002.019 New upgrade

Software MMI 2KY_7000.002.019 New upgrade

Software Engine 2KA_1000.003.003 New upgrade

Software Scanner 2KY_1200.001.020

Software Motor 2H7_1400.003.003

Software Bias 2H7_1600.001.014

Software Sleep 2H7_1800.002.001

Option Language BR 2KY_81BR.001.018

BROWSER 2H7_F000.001.015

FAX BOOT (5JP_5000.001.022)

FAX APL (5JP_5100.C05.006)

FAX IPL (5JP_5200.001.022)

FAX BOOT/APL 5JP_5500.C05.006 Supplied rmware (Combined fax boot and APL rmware)

Software DBA J00_E000.004.003

ENHANCEMENT

DP-750(B)/ DP-760(B) 3LK_9500.009.003

PF-720B (2 cassette) 3LM_9000.004.001 New upgrade

PF-760B (3000) 5H8_9000.003.002

DF-780(B) MAIN (1000) 5JA_9200.007.005 New upgrade

DF-760B (3000) MAIN 3LT_9200.006.003

DF-760B (3000) MIDDLE 3LT_9600.007.002

MT-720B (3000)MAIL BOX 3LW_9800.003.001

Classication

Field measure When the above mentioned phenomenon occurs, please upgrade all the rmware to the latest

KMIS Service Department, Kyocera Mita Europe A081 / SB 2KY-002

Entire stock rework

version at the same time.

In-eld modication at next visit

X

Page 1 of 2

In-eld modication by case

X

No modication necessary

Service Bulletin

Serial numbers of affected machines

Type Serial number

TASKalfa552ci March 2010

The above mentioned changes have been applied to machines produced after the above mentioned production date.

Item Contents

1 Data security kit

(E)

2 Maintenance

mode U464.

3 Error code

C6020.

4 Error code

C6130.

5 KPDL error. The KPDL error may occur, when printing certain PDF les from the USB memory with direct

6 Sort order at the

fax box.

The data security kit (E) is now supported.

Colour dots may appear on the print-out, after lowering the value at maintenance mode U464
(AC Calib Magnication) to prevent the colour dots from appearing.
Therefore the procedure has been changed.

Error code C6020 may occur due to a failure to remove the fuser roller heat caused by a
sudden machine drive stop, when pressing the Energy save key after the machine has
completed warming up in low temperature environments.
Therefore the timing to go into sleep mode and low power mode, has been extended with 7

seconds.

Error code C6130 may occur due to a failure to raise the press roller temperature when
turning ON the main switch in low temperature environments when the power supply has a
low voltage.
Therefore the C6130 detection timing has been changed from 60 to 75 seconds.

printing in duplex mode.

The sort designation has been changed to display in descending order by date when opening
the fax box.
Previously this would be displayed in ascending order by name.

KMIS Service Department, Kyocera Mita Europe A081 / SB 2KY-002

Page 2 of 2