Kyocera Qua tab QZ8 Settings Manual
Setting Guide
(12 keys layout)》
(QWERTY)》
(Godan Keyboard)》
Thank you for buying the "Qua tab QZ8" (simply called the "product" from here on).
In this guide, settings and precautions for using the product are described.
For explanations of basic functions, refer to "Basic Manual".
■Basic Operation
Describes the basic operations.
■Initial Settings
Make initial settings when you turn the
power on for the first time.
■au Initial Setting
Set au ID.
■au mail
Make initial settings for au mail etc.
■Child Lock
Set to use only one app to prevent a
child from launching other apps mistakenly.
Company names and product names referred to in this manual are trademarks or
registered trademarks of respective companies.
The TM, ® marks may be omitted in this manual.
Illustrations and screens shown in this manual may look different from
the actual illustrations and screens.
In some cases, minor details or a part of a screen may be omitted.
Basic Operation
For explanations of basic functions, refer to "Basic Manual".
Home screen (au Basic Home)
《
》
■Setting Display
Set the screen brightness and backlight time of the screen.
■Setting Wi-Fi
Describes how to connect Wi-Fi® network.
®
■Viewing/Playing Data
Describes how to view/play still images
or video data.
■Battery Settings
Describes how to save battery consumption, and how to increase battery
life.
Power button
F
■ The power button is on the top
Turning the power on
Press and hold F (Power button)
until the notification light turns on.
[ ](Chrome)] Chrome icon
Use Google Chrome to view Web pages.
Navigation bar
(BACK): Return to the previous screen. When "
C
H
N
tap this button to hide the keyboard or menu.
(HOME): Display the home screen. Long-touching this button activates Google.
(RECENTS): Show recently-used apps. Long-touching this button activates the multi-
window during apps activation. When the multi-window activates, this button
is changed to "
". Long-touching this button deactivates the multi-window.
Introduction
■Transferring data from au Settings
Menu
Describes how to restore/back up data
from/to your previously used phone to/
from this product using microSD card
or the au server.
December 2017, 1st Edition
Sold by: KDDI CORPORATION
OKINAWA CELLULAR TELEPHONE COMPANY
Manufactured by: KYOCERA Corporation
Displaying home
screen
From the Start screen,
slide the screen.
" appears in the character entry screen,
Start screen
《
Initial Settings
When you turn on the product for the first time after purchasing the product, follow the on-screen instructions to set language, functions and
services.
■ Setting up Google account
Set up Google account to use Google apps such as "Gmail", "Play Store".
Setting items are as below (besides the items below, register "First name" and "Last name").
User name
Password Register password for the Google account.
Register your Google account (user ID) and a character string for mail address. You can register a desired name,
but a name already registered by another user cannot be set.
1 2 3 4 5
Tap "
日本語（日本）
to select "English" →
"United States" → tap
[LET’S GO]
6 7 8 9
Enter a user name →
》
[NEXT]
Checking registration of user
name starts.
"
[Set up as new]
* If you restore a backup
or copy from a device,
select [Copy your data]
and follow the on-screen
instructions.
Enter a password
and reenter the
password for
confirmation →
[NEXT]
Set up the Wi-Fi ®
network to connect as
required
* If you do not set up, tap
[Use cellular network for
setup] → [CONTINUE].
* If you select [Don’t use
any network for setup] →
[CONTINUE], the name
input screen is displayed
and enter your name, and
then proceed to step 11.
And follow the on-screen
instructions.
Confirm/Change
the country name
and phone number
* If you do not set up, tap
“SKIP”.
[NEXT]
→
[VERIFY]
*1
→
[More options] →
[Create account]
* If you have a Google
account, enter a mail
address or phone number
.
[NEXT]
→
Check the contents,
then [I AGREE]
Enter “First name” and
“Last name”
[NEXT] →
→
Enter the date of birth
and gender → [NEXT]
10
Check the contents,
then [NEXT]
11 12 13 14 15
Display
Touch directly with your finger to operate.
Tap/Double-tap
Lightly touch a screen and
then immediately release your
finger. Tapping a screen twice
in the same position is called
double-tap.
Flick
Touch the screen and flick up/
down/left/right.
Long-touch
Keep touching an item, button,
etc.
Drag
While lightly touching the
screen, trace to the desired
position.
Slide
While lightly touching the
screen, trace to the desired
direction.
Zoom-in/Zoom-out
While touching the screen with
two fingers, move the fingers
away and closer to each other.
■ Character entry
Use the software keyboard for entering characters.
Tap the entry field in the character entry screen when registering contacts, creating mail, etc. to display the software keyboard.
Tap a key to enter character.
Switching character input method
Character entry screen (12 keys layout) → long-touch " " → drag to the direction of " " → [Google Japanese Input Settings] → [Keyboard
layout] → flick the keyboard to the left/right to select the desired character input method.
Select protection
features → Follow the
on-screen instructions
to set security and
notification
* If you do not set up, tap
[Not now] →
[SKIP ANYWAY].
*1 Text message for Google verification code will be sent to the set phone number.
Confirm the Google
service settings, then
[AGREE] → [NEXT]
Set up other
settings as required
[YES I’M IN]/
→
[NO THANKS]
Set up other settings as
required → [ALL SET]
Check the contents and
mark the check box, then
[NEXT]
* If you do not set up, tap
“NEXT”.
au Initial Setting
By setting au ID, you can use various services provided by au such as "au Kantan Kessai" which allows you to purchase apps from the au
マ ート パス
• If you skip the operation of "au Initial Setting" at the time of purchase, you can set au ID later. In that case, operate from the home screen
(au Smart Pass) or Google Play. Main setting items are as follows.
→ [ 基本機能
(Basic functions)
]→[
Settings
au Settings Menu
]→[
au Initial Setting]
]→[
1 2 3 4 5
Check / Uncheck [Update]
[GET STARTED]
→
6 7 8 9
[Sign in]
*1
Enter the security code*2
→ [次へ
(Next)]
Enter the password →
[
同意して次へ
(Agree)]
[次へ (Next)]
10
ス
Flick input
Tap a key to display characters like the right screen
that can be input by flick input. Flick to the direction
of the character to enter.
• To enter same characters repeatedly when not in
flick input mode, tap "
" to shift to the right.
Character entry screen
《
(12 keys layout)
》
Displaying input candidates for flick input
To enter "B", flick to the left.
* To enter "A", release the finger.
Character entry mode switch key
Tap to switch character type.
■ Setting Do not disturb feature
• Slide down the status bar → [ ] → [Total silence] / [Alarms only] / [Priority only] →set the auto cancelling time → [DONE] to enable
the Do not disturb feature.
• Slide down the status bar when the Do not disturb feature is enabled → tap [
] / [ ] / [ ] to disable the feature.
■ Setting the App Permissions
The first time you launch an app/function that accesses the functions or information of the product, a confirmation screen for requesting
access permission appears. If the confirmation screen appears, confirm the content and tap "DENY"/"ALLOW".
• If you do not permit, apps/function may not be activated or use of function may be restricted.
• For some apps/functions, an explanation screen for the permission appears. A confirmation screen may appear in several times and its
content may vary. Confirm the content and follow the on-screen instructions.
• In this manual, description of such confirmation screen may be omitted.
*3
[次へ (Next)]
*1 If you registered au ID in the past, step 3 and 4 are not displayed. Go to step 5.
*2 The security code is a four-digit number written at subscription.
*3 A confirmation screen for requesting access permission will be displayed several times. In this case, do the same as step 7.
*4 When “Select apps” is displayed on “Backed up” field, tap to check the app.
*5 If you stored your data to au server using “Data Storage App” , tap “Restore from backup now” to restore the data.
[ALLOW]
Check apps to install*4
[Next]
→
Check items to
configure → [Next]
[Finish]
*5
au mail
To use au mail, subscription to LTE NET is required.
If you did not subscribe it when you purchased the product, contact an au shop or Customer Service Center.
Your au mail address is determined automatically after initial setting. You can change the au mail address later.
■ Initial settings
* You cannot make initial settings in Wi-Fi® communication.
1 2 3 4
Setting Wi-Fi
Use your home Wireless LAN (Wi-Fi®) or public wireless LAN to connect to the Internet.
Main settings are as follows.
WPS system Use for registration of access point compatible with Wi-Fi Protected Setup™ with WPS mark.
* If you turn on wireless LAN (Wi-Fi®) function, battery consumption increases. You are recommended to turn wireless LAN (Wi-Fi®) function to OFF
when not using wireless LAN (Wi-Fi
®
®
) function.
1 2 3
Available Wi-Fi® networks are listed. Select a
®
network to connect → Enter a password
Wi-Fi
as required → [CONNECT] to connect the Wi-
®
network.
Fi
®
network you want to connect
If a Wi-Fi
cannot be detected, tap “ Ad d n e t w o r k ” and
connect the Wi-Fi
®
network manually.
Home screen→[ ]
The license
agreement of au
mail app appears
check the
→
contents, [AGREE]
follow the on-
→
screen instructions
to operate, and go
next.
Check au mail
address, and [
(Close)]
る
* If a confirmation
screen is displayed,
follow the on-screen
instructions.
閉じ
au mail mailbox is
displayed.
■ Changing your au mail address
1 2 3 4 5
Home screen
→ [
]→[Change
[
]
Address/Setting Filter]
[E
メールアドレスの変
(To Change E-mail
更へ
address)]
Enter the security code →
[送信 (Send)]
6 7 8
A confirmation screen
for changing E-mail
address appears →
check the contents,
then [
accept)]
承諾する
(I
Home screen →
[
(Basic
基本機能
Function)] → [Settings]
[Wi-Fi]
Turn “ON” and [ ]
■ Using WPS system access point
4 5
[Advanced] →
[WPS Push Button] /
[WPS Pin Entry]
For using WPS button, tap
"WPS Push Button" and then
keep pressing WPS button of
access point to set to WPS
mode. An access point is
automatically detected and
registration starts.
For entering WPS PIN, tap
"WPS Pin Entry" and enter
displayed PIN code for access
point, then registration starts.
Viewing/Playing Data
By transferring data from the previously used au phone to a microSD™ memory card, you can insert the microSD memory card into this
product and view/play
Conditions appears. Follow the on-screen instructions.
1 2
*
still image or movie data using "File Commander" in the product. When you activate for the first time, the Terms and
* Copyrighted data on the previously used au phone cannot be transferred to the
product. However, some Chaku Uta Full
able to be transferred and played on the product with the same phone number by
backing up with LISMO Port Ver 4.2 or later.
®
, Video Clip, Chaku Uta Full Plus® may be
Enter au mail address →
[送信 (Send)]
[OK] [
閉じる
(Close)]
■ Checking your au mail address
1 2 3
Home screen
] [ ]
→ [
[E-mail information] au mail address is
4
displayed.
Child Lock
Set to use only one app to prevent a child from launching other apps mistakenly. In addition, set the utilization time to prevent excessive use
for many hours.
■Setting Child Lock ■Canceling Child Lock
1 2 1 2
Home screen →
[
(Basic
基本機能
Function)]
[File Commander]
→
[CONTINUE] →
→
[CONTINUE WITH
ADS]
Tap a category to be
displayed → Tap a file →
Tap data
Data is viewed/played.
Battery Settings
■Setting Battery saver
Control operations by vibrator, location information service, etc. to save battery consumption.
1 2 3 4
Home screen → [
(Basic Function)] →
機能
■Setting Battery care mode
Battery life is extended by not fully charged.
[Settings]
基本
[Battery saver] Set to "ON" [Turn on automatically] →
[Never] / [at 5% battery] /
1 2 3
[at 15% battery]
Launch an app to be
pinned, slide down the
status bar, and then
the notification panel is
displayed. → [Child Lock]
* When you launch the Child
Lock for the first time, "How
to use" is displayed. After
reading it, close the Child
Lock once, and repeat
step 1.
Set the utilization time
to turn on the Child
Lock, and [START]
* When the utilization
time is approaching,
the product vibrates.
When the utilization
time is over, the product
is locked automatically.
Long-touch C and N
simultaneously.
Enter the displayed
characters, and [OK]
* When the "unlock
screen for grownups" is set to OFF, the
characters are not
displayed.
Setting Display
Set the screen brightness and backlight time of the screen.
■Adjusting the screen brightness level ■ Increasing the backlight time of the screen
1 2 1 2
Home screen → [
(Basic Function)]
機能
[Settings]
→
[Display] → Slide the
基本
indicator of “Brightness
level” left/right
* To make brighter, slide the
indicator right. To make
darker, slide the indicator
left.
Home screen → [
(Basic Function)]
機能
[Settings]
→
* When [Rollbahn Flap case] → set [Backlight auto extension]
to [ON], the backlight time of the screen is extended
automatically when the case is standing.
基本
[Display] → [Sleep] →
Select the lighting time
Home screen → [
(Basic Function)] →
能
[Settings]
基本機
[Battery] → [ ] →
[Battery care mode]
Set to "ON"
Transferring data from au Settings Menu
Restore/back up data from/to your previously used au phone to/from this product using a microSD memory card or the au server.
• To restore data using the au server, store the data from the old au phone to the au server beforehand. Setting au ID is required for using
the au server (If the old au phone does not have au Settings Menu, use auCloud app).
• For restoring data using a microSD memory card, save the data to the microSD memory card using the old au phone in advance (If the old
au phone does not have au Settings Menu, use au backup app).
1 2 3 4
Home screen →
[
(Basic
基本機能
Function)] → [Settings]
Using "Data Storage App"
To use "Data Storage App" to back up photos, etc. to the au server automatically, set as follows.
Home screen → [
type to back up automatically
[au Settings Menu] [Data Transfer] Tap "
基本機能
(Basic Function)] → [Settings] → [au Settings Menu] → [Backup Setting] → Select a data
機種変更は
(For model
こちら
replacement)" and
transfer data according
to the guidance on the
screen.
Loading...