This manual is based on the production version of the Kyocera
S1350 phone. Software changes may have occurred after this
printing. Kyocera reserves the right to make changes in
technical and product specifications without prior notice.
The Kyocera Communications Inc. (“KCI”) products described in
this manual may include copyrighted KCI and third party
software stored in semiconductor memories or other media.
Laws in the United States and other countries preserve for KCI
and third party software providers certain exclusive rights for
copyrighted software, such as the exclusive rights to distribute or
reproduce the copyrighted software. Accordingly, any
copyrighted software contained in the KCI products may not be
modified, reverse engineered, distributed or reproduced in any
manner not permitted by law.
Furthermore, the purchase of the KCI products shall not be
deemed to grant—either directly or by implication, estoppel, or
otherwise—any license under the copyrights, patents, or patent
applications of KCI or any third party software provider, except
for the normal, non-exclusive royalty-free license to use that
arises by operation of law in the sale of a product.
Kyocera is a registered trademark of Kyocera Corporation. Brick
Attack and Race 21 are trademarks of Kyocera Wireless Corp.
QUALCOMM is a registered trademark of QUALCOMM
Incorporated.
Openwave is a trademark of Openwave Systems Incorporated.
eZiText is a registered trademark of Zi Corporation. TransFlash
is a trademark of SanDisk Corporation. Bluetooth trademarks
are owned by Bluetooth SIG, Inc. and used by Kyocera
Communications Inc. under license.
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause
undesired operation.
Accessories used with this device for body-worn operations
must not contain any metallic components and must provide at
least 15 mm separation distance including the antenna and the
user’s body.
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured to not exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government. These
limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population. The
guidelines are based on standards that were developed by
independent scientific organizations through periodic and
thorough evaluation of scientific studies. The standards include
a substantial safety margin designed to assure the safety of all
persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a
unit of measurement known as the Specific Absorption Rate, or
SAR. The SAR limit set by the FCC is 1.6 W/kg.*
Tests for SAR are conducted u sing standard operating positions
specified by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified power
level, the actual SAR level of the phone while operating can be
well below the maximum value. This is because the phone is
designed to operate at multiple power levels so as to use only
the power required to reach the network. In general, the closer
you are to a wireless base station antenna, the lower the power
output.
2
Before a phone model is available for sale to the public, it must
be tested and certified to the FCC that it does not exceed the
limit established by the government-adopted requirement for
safe exposure. The tests are performed in positions and
locations (e.g., at the ear and worn on the body) as required by
the FCC for each model.
Body-worn measurements differ among phone models,
depending upon availability of accessories and FCC
requirements. While there may be differences between the SAR
levels of various phones and at various positions, they all meet
the government requirement for safe exposure.
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance
with the FCC RF emission guidelines.
The highest reported SAR values of this phone are:
Cellular CDMA mode (Part 22)
Head: 1.48 W/kg; Body-worn: 0.90 W/kg
PCS mode (Part 24)
Head: 1.28 W/kg; Body-worn: 1.11 W/kg
AWS mode (Part 27)
Head: 1.40 W/kg; Body-worn: 1.08 W/kg
SAR information on this model phone is on file with the FCC and
can be found under the Display Grant section
www.fcc.gov/oet/ea/fccid
OVFS13503CB.
Additional information on SAR can be found on the Cellular
Telecomm unications and Internet Association (CTIA) web-site at
www.ctia.org
* In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged over
one gram of tissue.
.
:
:
:
after searching on the FCC ID:
Bluetooth® Certification
For information about S1350 Bluetooth Certification, visit the
Bluetooth Qualification Program Web site at
www.bluetooth.org/tpg/listings.cfm
.
Caution
The user is cautioned that changes or modifications not
expressly approved by the party responsible for compliance
could void the warranty and user’s authority to operate the
equipment.
Optimize your Phone’s Performance
Use the instructions in this guide to learn how to optimize the
performance and life of your phone and battery.
Air Bags
If you have an air bag, DO NOT place installed or portable
phone equipment or other objects over the air bag or in the air
bag deployment area. If equipment is not properly installed, you
and your passengers risk serious injury.
Medical Devices
Pacemakers
—Warning to pacemaker wearers: Wireless
phones, when in the ‘on’ position, have been shown to interfere
with pacemakers. The phone should be kept at least six (6)
inches away from the pacemaker to reduce risk.
The Health Industry Manufacturers Association and the wireless
technology research community recommend that you follow
these guidelines to minimize the potential for interference.
• Always keep the phone at least six inches (15 centimeters)
away from your pacemaker when the phone is turned on.
• Do not carry your phone near your heart.
• Use the ear opposite the pacemaker.
• If you have any reason to suspect that interference is taking
place, turn off your phone immediately.
Hearing aids
hearing aids. In the event of such interference, you may want to
call the customer service line to discuss alternatives.
Other medical devices
device, consult the manufacturer of the device to determine if it
is adequately shielded from external RF energy. Your physician
may be able to help you obtain this information.
—Some digital wireless phones may interfere with
—If you use any other personal medical
User Guide3
In health care facilities
facilities when instructed. Hospitals and health care facilities
may be using equipment that is sensitive to external RF energy.
—Turn your phone off in health care
Potentially unsafe areas
Posted facilities
posted notices require you to do so.
Aircraft
that is in the air. Turn your phone off or switch it to Airplane
Mode before boarding aircraft.
Vehicles
inadequately shielded electronic systems in motor vehicles.
Check with the manufacturer of the device to determine if it is
adequately shielded from external RF energy.
Blasting areas
progress. Observe restrictions, and follow any regulations or
rules.
Potentially explosive atmospheres
when you are in any area with a potentially explosive
atmosphere. Obey all signs and instructions. Sparks in such
areas could cause an explosion or fire, resulting in bodily injury
or death. Areas with a potentially explosive atmosphere are
often, but not always, clearly marked.
They include:
• fueling areas such as gas stations
• below deck on boats
• transfer or storage facilities for fuel or chemicals
• vehicles using liquefied petroleum gas, such as propane or
• areas where the air contains chemicals or particles such as
• any other area where you would normally be advised to turn
—Turn your phone off in any facility when
—FCC regulations prohibit using your phone on a plane
—RF signals may affect improperly installed or
—Turn off your phone where blasting is in
—Turn off your phone
butane
grain, dust, or metal powders
off your vehicle engine
Use with Care
Use only in normal position (to ear). Avoid dropping, hitting,
bending, or sitting on the phone.
4
Avoid Magnetic Environments
Keep the phone away from magnets which can cause improper
functioning of the phone.
Keep Your Phone Dry
Keep the phone dry. Damage can result if the phone gets wet.
Water damage is not covered under warranty.
Resetting the Phone
If the screen seems frozen and the keypad does not respond to
key presses, reset the phone by completing the following steps:
1. Remove the battery cover.
2. Remove and replace the battery.
If the problem persists, return the phone to the dealer for
service.
Accessories
Kyocera makes no representation or warranty with regard to
accessories other than those originally packaged with the
phone. Please check with the manufacturer of any third party
accessories as to compatibility and safety.
Radio Frequency (RF) Energy
Your telephone is a radio transmitter and receiver . When it is on,
it receives and sends out RF energy. Your service provider’s
network controls the power of the RF signal. This power level
can range from 0.006 to 0.6 watts.
In August 1996, the U.S. Federal Communications Commission
(FCC) adopted RF exposure guidelines with safety levels for
hand-held wireless phones. These guidelines are consistent with
the safety standards previously set by both U.S. and
international standards bodies in the following reports:
• ANSI C95.1 (American National Standards Institute, 1992)
• NCRP Report 86 (National Council on Radiation Protection
and Measurements, 1986)
• ICNIRP (International Commission on Non-Ionizing
Radiation Protection, 1996)
Your phone complies with the standards set by these reports
and the FCC guidelines.
E911 Mandates
Where service is available, this phone complies with the Phase I
and Phase II E911 Mandates issued by the FCC.
Hearing Aid Compatibility (HAC) with Mobile
Phones
Some mobile phones and hearing devices (hearing aids and
cochlear implants), when used together, result in buzzing,
humming, or whining noises detected by the user.
Some hearing devices are more immune than others to this
interference noise, and phones also vary in the amount of
interference they generate.
The wireless telephone industry has developed ratings for some
of their mobile phones, to assist hearing device users in finding
phones that may be compatible with their hearing devices. Not
all phones have been rated.
Phones that are rated have the rating on their box or a label on
the box. The ratings are not guarantees and results will vary
depending on the user’s hearing device and hearing loss. If your
hearing device happens to be vulnerable to interference, you
may not be able to use a rated phone successfully. Trying out
the phone with your hearing device is the best way to evaluate it
for your personal needs.
M-Ratings
—Phones rated M3 or M4 meet FCC requirements
and are likely to generate less interference to hearing devices
than phones that are not labeled. M4 is the better/higher of the
two ratings.
T-Ratings
—Phones rated T3 or T4 meet FCC requirements and
are likely to be more usable with a hearing device’s telecoil (“T
Switch” or “Telephone Switch”) than unrated phones. T4 is the
better/higher of the two ratings. (Note that not all hearing
devices have telecoils in them.)
Hearing devices may also be measured for immunity to this type
of interference. Your hearing device manufacturer or hearing
health professional may help you choose the proper rating for
your mobile phone. The more immune your hearing aid is, the
less likely you are to experience interference noise from mobile
phones.
For more information about hearing aid compatibility, visit the
FCC’s Consumer & Governmental Affairs Bureau Web site at
below the back cover. It
is square. Using your
thumbnail, lift the cover
to remove.
3. Place the battery in the
battery casing with the
metal contacts facing
toward the top of the
phone. The metal
contacts of the battery
must make contact with
the metal contacts of the battery casing.
4. Replace the battery
door by lining up the
notches with the
openings at the top and
on each side of the
battery casing.
5. Snap the cover into
place.
User Guide9
Charge the Battery
1. Connect the AC
adapter to the
Micro-USB jack on the
side of the phone.
2. Plug the adapter into a
wall outlet.
The battery icon in the
upper-right corner of the screen tells you
whether the phone is:
– Charging (the icon is animated)
– Partially charged
– Fully charged
You must have at least a partial charge in the
battery to make or receive calls. You can safely
recharge the battery at any time, even if it has a
partial charge.
Note:
Before removing the battery, make sure
the phone is powered off.
Battery Safety Guidelines
• Do not disassemble or open the battery.
• Do not crush, bend, deform, puncture, or
shred the battery.
• Do not attempt to insert foreign objects into
the battery.
• Do not immerse the battery or expose it to
water or other liquids. Even if a battery
appears to dry out and operate normally,
internal parts can slowly corrode and pose a
safety hazard.
• Always keep the battery between 15 °C and
25 °C (59 °F and 77 °F). Do not expose the
battery to extremes of temperature (heat or
cold), fire, or other hazards such as a
cooking surface, iron, or radiator.
• Never use any damaged battery.
• Only use the battery for its intended phone.
• Only use the battery with a qualified
charger. Use of an unqualified battery
charger may present a risk of fire,
explosion, leakage, or other hazard. If you
are unsure about whether a charger is
qualified, contact customer support.
• Do not short-circuit the battery or allow
metallic conductive objects—such as keys,
coins, or jewelry—to contact the battery’s
terminals.
10Phone Battery
• Replace the battery only with another
qualified battery. Use of an unqualified
battery may present a risk of fire,
explosion, leakage, or other hazard. If you
are unsure about whether a replacement
battery is compatible, contact customer
support.
• Promptly dispose of used batteries in
accordance with local regulations and
recycle if possible. Do not dispose as
household waste.
• Supervise all battery usage by children.
• Avoid dropping the phone or battery . If the
phone or battery is dropped, especially on a
hard surface, an internal short-circuit can
occur and pose a safety hazard. If you
suspect battery damage, take it to a service
center for inspection.
• Improper battery use may result in a fire,
explosion, or other hazard.
Common Causes of Battery Drain
• Playing games or using the Web.
• Taking pictures with the flash on.
• Keeping backlighting on.
• Operating when far away from a base
station or cell site.
• Using data cables or accessories.
• Operating when no service is available, or
service is available intermittently.
• High earpiece and ringer volume settings.
• Repeating sound, vibration, or lighted
alerts.
Phone Overview
Get to Know Your Phone
The following shows the front of the phone.
1. External speaker.
2. Home screen.
3.
Left
softkey selects items that appear on the lower left of the
display. At the home screen, you can select
4.
Speakerphone
incoming calls.
5.
Navigation
accesses the following shortcuts from the home screen:
– Scroll left or right to highlight an icon on the application bar.
– Scroll up to go to
– Scroll down to go to
6.
Send
key starts or answers a call. Press once to display the All
Calls list, and two times to redial the last number dialed.
7. Keypad for entering numbers, letters, or symbols.
8.
* Shift
activate keyguard.
9.
Right
display. At the home screen, you can select
10.
OK
key selects a menu item or option. At the home screen, you launch the application bar
when you press the
11.
Back
key erases characters in text entry and returns you to the previous screen when
navigating through menus.
12.
End
key turns the phone on and off, ends a call or browser session, and returns you to the
home screen.
13.
# Space
mode.
14.
0 Next
User Guide11
key activates the speakerphone and answers
key scrolls through lists and text entry fields and
Contacts > View All
Messaging
key changes the text mode in text entry. Press and hold to
softkey selects items that appear on the lower right of the
OK
key.
key enters a space during text entry. Press and hold to activate or deactivate silent
key cycles through word choices during text entry.
Menu
.
.
.
Contacts
.
The following shows the back of the phone.
1. Jack for a hands-free headset (sold separately).
2. Camera lens.
3. Jack for AC adapter (included) and Micro-USB cable (sold
separately).
4. Accessory eyelet (for optional straps and lanyards). You need
to take the back cover off to attach a strap or lanyard correctly.
5.
Volume
key raises or lowers ringer volume.
6.
Shortcut
key accesses a feature on your phone. You can assign
which feature the
Warning:
Inserting an accessory into the incorrect jack will
Shortcut
key accesses.
damage the phone.
12Phone Overview
MetroPCS Applications
At the home screen, your phone displays an application bar. Scroll left or right with the
Navigation
phone has the following application shortcuts available:
key to highlight an application. Press the OK key to launch an application. Your
mail@metro
Metro411
Visual Voice Mail
MetroWEB
@metro App Store
MetroNavigator
Pocket Express
myMetro
MetroBACKUP
My Extras
Note:
Please check with your service provider regarding the pricing and availability of these
Send email messages.
Find a phone number.
Access your voicemail.
Launch the web browser.
Download an application.
Find directions using GPS.
Check the news.
Check your account status.
Back up your data.
Download a media file.
applications.
User Guide13
Screen Icons
These icons may appear on your phone’s screen.
The phone is operating in IS2000 (1X)
digital mode.
The phone is in airplane mode.
The alarm clock is set.
The phone is set to auto answer.
The battery is fully charged. The more black
bars, the greater the charge.
The phone is transferring data with
Bluetooth.
A headset or other hands free device is in
operation.
A headset or other hands free device is
transferring data.
Bluetooth wireless technology is disabled
(Off).
Bluetooth wireless technology is enabled
(On).
The phone is in camera mode.
The battery will not charge.
Data service is available and active on your
phone. Check with your service provider for
availability.
Data service is available, but the phone is
dormant.
(blinking) The phone is receiving
high-speed data.
(blinking) The phone is sending high-speed
data.
The phone is operating in IS95 digital
mode.
Content is DRM protected.
Position location is set to emergency
services only.
Position location is set to your service
provider and to emergency services.
The phone has a high speed data
connection.
A call is in progress.
The phone is set to light up instead of ring.
New message.
New photo and text message.
New photo and voice message.
New photo message.
New photo, voice and text message.
New text message.
New voice and text message.
New voice message.
14Phone Overview
The phone is not receiving a signal. You
cannot make or receive calls.
The phone is roaming outside of its home
service area.
The phone is in privacy mode or is
accessing a secure Web site.
The phone is receiving a signal. You can
make and receive calls. Fewer bars indicate
a weaker signal.
The speaker phone is turned on.
A T-coil hearing aid is in operation.
A traffic channel is active.
The phone is in TTY device mode.
The phone is set to vibrate or to vibrate and
Download an application.
Browse the web.
Take a picture.
Access these options:
Access these options:
Clock, Tip Calculator, Calculator, Timer, Stopwatch
World Clock
Access these options:
Convenience, Voice Features, Accessories, Network
Security, Memory Status
All, Incoming, Outgoing, Missed
, and
Kilobyte Counter
,
Speed Dial List, Voice Dial List, Delete All
View All, Add New, Metro411, View
.
Inbox, New Text Msg, New Pic Msg
.
Images, Sounds
Voice Memo, Scheduler, Alarm
, and
Memopad
Bluetooth, Sounds, Display
, and
, and
.
Phone Info
Delete Content
.
, and
,
.
, and
,
,
,
,
,
.
16Main Menu
Guide Conventions
In this guide, the following conventions are
used when describing phone features.
Select
means to press the
softkey or
display. For example, “Select
to physically press the left softkey to choose
Menu
Press
example, “Press the
call” tells you to physically press the
on your phone.
Scroll
move through a list on the display. For
example, “Scroll through your contacts list to
choose a contact” means to physically press the
Navigation
the list on the display.
>
option from a menu or list. For example,
“
1. Press the left softkey to select
2. Scroll to the
3. Press the
OK
key to select an item seen on the
from the display.
means to press a phone key. For
means to use the
key up or down to scroll through
(greater than symbol) tells you to select an
Menu
>
Settings
OK
Left
Send
key to make a phone
Navigation
” means to:
Settings
option.
key to select
softkey,
Menu
key to
Menu
Settings
Right
” tells you
Send
key
.
.
User Guide17
2Call Features
This section describes the basic features related
to calls.
Power Phone Up
• To turn your phone on, press and hold the
End
key until the phone display lights up.
• To turn your phone off, press and hold the
End
key until the phone plays a short
musical sound and turns off.
Make Phone Calls
Make sure you are in an area where a signal
can be received. Look for the signal strength
icon on the home screen. The more bars, the
stronger the signal. If there are no bars, move
to where the signal strength is better.
When the phone has been idle for a time, it
cycles into power save mode. Press any key to
return to normal operating mode.
There are several ways you can make a phone
call.
Call Using a Number
1. Enter a phone number.
2. Press the
Call Using a Contact
1. From
2. Press the
18Power Phone Up
Send
View All
Send
key.
, highlight a contact.
key.
Call Using Voice Commands
You can use voice commands to call a contact
from your voice dial list or to dial a phone
number. For more information, see “Voice
Commands” on page77.
Redial a Number
1. Press the
2. Highlight a phone number or contact and
Note:
received or missed, press the
Send
history.
press the
To redial the last number called,
key to open your call
Send
key.
Send
key twice.
Answer Phone Calls
When a call comes in, the phone rings,
vibrates, or lights up. The phone number of the
caller also appears if it is not restricted. If the
number is stored in your contacts list, the
contact’s name appears. There are several ways
you can answer a phone call.
Answer Using Earpiece
Press the
Send
key.
Answer Using Speakerphone
Press the
Speakerphone
key.
End Phone Calls
Press the
End
key.
Activate Voice Dialing
1. Press and hold the
2. Follow the prompts.
For more information, see “Voice Commands”
on page 77.
Send
key.
Volume Control
Adjust Volume during a Call
Press the
Volume
earpiece volume during a call.
Use the Speakerphone
Your phone has a built-in speakerphone.
• To turn on the speakerphone, press the
Speakerphone
appears on the home screen when the
speakerphone is on.
• To turn off the speakerphone, press the
Speakerphone
Note:
If you press the
during an incoming call, you will answer the
call.
Silence an Incoming Call
• To silence the phone without answering the
call, press the
Volume
• To silence the phone and answer the call,
press the
key up or down and then press the
key.
key up or down to adjust the
key. The speakerphone icon
key again.
Speakerphone
Back
key up or down.
Back
key or press the
key or press the
key
Volume
Send
Use Speed Dialing
Speed dialing allows you to assign a one- or
two-digit shortcut to a contact. Before you can
use speed dialing you must save a phone
number as a contact and assign a speed dial
location to it. See “Assign Speed Dials to
Contacts” on page 31.
To call a contact that has a speed dial location:
1. Enter the one- or two-digit speed dial
location.
2. Press the
Send
key.
Emergency Services
Call Emergency Services
You can call an emergency code even if your
phone is locked or your account is restricted.
When you call, your phone enters emergency
mode. This enables the emergency service
exclusive access to your phone to call you
back, if necessary. To make or receive regular
calls after dialing the code, you must exit this
mode.
To dial an emergency code:
1. Enter the 3-digit emergency code.
2. Press the
Note:
code (911, 111, 999, 000, etc.), your phone
operates as described above.
Send
Regardless of the 3-digit emergency
key.
User Guide19
Exit Emergency Services
When you have completed the emergency call:
1. Select
2. Select
Note: To determine who has access to your
location, see “Set Location Information” on
page 74.
Exit
.
Exit
again to confirm your choice.
20Emergency Services
3Text Entry
You can enter letters, numbers, and symbols in
contacts, text messages, and your banner.
Text Entry Modes
The text entry screen has the following
features:
1. Characters remaining
that you can type.
Allowed message
length can vary
depending on your
service.
2. Text entry fields.
3. Current capitalization setting.
4. Current text entry mode.
Note:
The entry mode will default depending
on the task you are doing. For example, when
entering a phone number, you are in
Only
mode. When entering a name for a
contact, you are in
Normal Alpha
Numbers
mode.
Enter Letters with Number Keypad
From the text entry field, select
Normal Alpha
text in the following ways:
• To enter a letter, press a key once for the
first letter, twice for the second letter, and
so on. If your phone is set to Spanish,
accented letters are available. Wait for the
cursor to move right and enter the next
character. Press the
space.
• To change case mode for a single letter,
press that key until you see the letter case
you want. To change the case mode, press
the
• To enter a number , press and hold a number
key until the number appears on the screen.
The icon indicates you are in
Alpha
key to switch input modes.
to enter letters. You can enter
* Shift
key.
input mode. Press and hold the
# Space
Options >
key to enter a
Normal
* Shift
Enter Numbers with Number Keypad
From the text entry field, select
Numbers Only
press a key once.
The icon indicates you are in
Only
input mode. Press and hold the
key to switch input modes.
User Guide21
to enter a number when you
Options >
Numbers
* Shift
Rapid Entry with Number Keypad
From the text entry field, select
Rapid Entry
spell against a dictionary of common words.
You can enter text in the following ways:
• To enter words, press a key once. For
• To change case mode, press the
• To enter a number , press and hold a number
The icon indicates you are in
input mode. Press and hold the
key to switch input modes.
to check words you are trying to
example, to enter the word “Glow” press
the 4 > 5 > 6 keys. If the word doesn’t
match what you want, press
look at other word matches. When you see
the word you want, scroll right.
key until the number appears on the screen.
Options >
0 Next
key to
* Shift
Rapid Entry
* Shift
input
key.
Enter Symbols with Number Keypad
While entering text in
you can enter symbols by pressing the
until you see the symbol you want. Using this
method, you have access to the following
symbols:
. @ ? ! - , & : ‘
To access the full set of symbols:
1. From the text entry field, select
Add Symbols
2. Scroll up or down to view the list of
symbols.
3. Press the number key corresponding to the
symbols to enter it.
22Text Entry Modes
Normal Alpha
.
mode,
1
key
Options
>
Text Entry Quick Reference
This table gives instructions for entering letters, numbers, and symbols.
To...Do this...
Use
Enter a letter
Enter a number
Enter a symbol
Enter a space
Erase a character
Erase all characters
Move the cursor right or left
Move the cursor up or down
Change input mode
Change case mode
Capitalize any letter
Lowercase any letter
Initial caps
Select options on the bottom of th e screen
Normal Alpha
see the letter your want.
Use
Numbers Only
Use
Normal Alpha
you see the symbol you want.
Press the
Press the
Press and hold the
Scroll left or right.
Scroll up or down.
Press and hold the
Press the
In
Normal Alpha
uppercase.
In
Normal Alpha
lowercase.
In
Normal Alpha
sentence case.
Press the appropriate left or right softkey.
mode and press a key until you
mode and press a key.
mode and press the 1 key until
# Space
key.
Back
key.
Back
* Shift
* Shift
key.
mode, press the
mode, press the
mode, press the
key.
key.
* Shift
* Shift
* Shift
key. Choose
key. Choose
key. Choose
User Guide23
4Recent Calls
Recent Calls Menu
Select
Recent Calls
Level 1 >Level 2 > Level 3
Recent CallsAll
from the main menu to access the following functions:
See a list of all voice calls you have received.
See a list of all voice calls you have made.
See a list of all voice calls you have missed.
Access these options:
Access these options:
Life
See how much data you have sent and received.
All, Incoming, Outgoing
.
All Voice Calls, All Data Calls
, and
Missed
, and
.
Work with Call Lists
Return Any Call
1. From
All
, highlight a number.
2. Press the
This list contains all calls made and received.
select
Send
key to call the number or
Options
to access more features.
Return a Received Call
1. From
Incoming
2. Press the
select
, highlight a number.
Send
key to call the number or
Options
to access more features.
This list contains all calls received.
Return an Outgoing Call
1. From
Outgoing
2. Press the
select
, highlight a number.
Send
key to call the number or
Options
to access more features.
This list contains all calls you have made.
24Recent Calls Menu
Return a Missed Call
1. From
Missed
, highlight a number.
2. Press the
This list contains all calls you received, but did
not answer.
select
Send
key to call the number or
Options
to access more features.
Manage a Missed Call Alert
When you have missed a call, a “Missed Call”
alert appears on your screen. Y ou can do one of
the following:
• To clear the screen, select
• To view the call details, select
press the
OK
• To return the call, select
Send
key.
key.
Dismiss
View
and press the
View
.
or
Call List Options
Save Number from Call List
1. At a call list, highlight a number.
2. Select
3. Select
View Contact from Call List
1. At a call list, highlight a contact.
2. Select
Options > Save
Save New Contact
contact or
to an existing contact.
details screen.
Add to Existing
Options > View
.
to create a new
to add a number
to see the contact
Send Text Message from Call List
1. At a call list, highlight a contact.
2. Select
3. Complete your text message and select
Options > Send Text Msg
Send
.
.
Send Multimedia Message from Call List
1. At a call list, highlight a contact.
2. Select
3. Complete your multimedia message and
Options > Send Picture Msg
select
Send
.
.
Erase Call List Records
Erase a Single Record
1. At a call list, highlight a contact.
2. Select
Erase a Call List
From
erase records from. For example to erase all
records from the incoming call list, select
Incoming > Yes
Erase All Call Lists
From
erase all records from all call lists.
Options > Erase Record > Yes
Erase Call Lists
Erase Call Lists
, select a call list to
.
, select
All > Yes
.
to
User Guide25
Work with Call Timers
View Last Call Timer
From
All Voice Calls
to view the total call time of your last call made
or received. Select
View Outgoing Calls Timer
From
All Voice Calls
view the number of calls and the total call time.
Select
Done
This timer tracks all calls made since you last
reset the timer. To reset this timer to zero,
select
Reset > Yes
View Incoming Calls Timer
From
All V oice Calls
view the number of calls and the total call time.
Select
Done
This timer tracks all calls received since you
last reset the timer. To reset this timer to zero,
select
Reset > Yes
View All Calls Timer
From
All Voice Calls
the number of calls and the total call time.
Select
Done
This timer tracks all calls received since you
last reset the timer. To reset this timer to zero,
select
Reset > Yes
, select
Done
when finished.
, select
when finished.
.
, select
when finished.
.
, select
when finished.
.
Last Voice Call
Total Dialed
T otal Received
All Calls
to view
to
to
View Outgoing Data Timer
From
All Data Calls
the number of calls and the total call time.
Select
Done
This timer tracks all calls made since you last
reset the timer. To reset this timer to zero,
select
Reset > Yes
, select
when finished.
.
Total Sent
View Incoming Data Timer
From
All Data Calls
view the number of calls and the total call time.
Select
Done
This timer tracks all calls received since you
last reset the timer. T o reset this timer to zero,
select
Reset > Yes
, select
when finished.
.
T otal R eceived
View All Data Timer
From
All Data Calls
the amount of data sent and received by the
phone since the last reset. Select
finished.
This timer tracks all calls received since you
last reset the timer. T o reset this timer to zero,
select
Reset > Yes
.
, select
All Calls
Done
View Calls Life Timer
From
Life
, select
number of calls and the total call time. Select
Done
when finished.
This timer tracks all calls made and received
for life of the phone and cannot be reset.
All Voice Calls
to view the
to view
to
to view
when
26Work with Call Timers
View Data Life Timer
From
Life
, select
number of calls and the total call time. Select
Done
when finished.
This timer tracks data sent and received for life
of the phone and cannot be reset.
All Data Calls
to view the
View Data Counter
Select
Kilobyte Counter
of kilobytes sent during data calls. Select
when finished.
This timer tracks kilobytes sent during data
calls made, data calls received, and for the life
of the phone. To reset the data counter to zero,
select
Options > Reset > Yes
to view the amount
Done
.
User Guide27
5Contacts
Use
Contacts
to store information about a person or company.
Contacts Menu
Select
Contacts
from the main menu to access the following functions:
Level 1 >Level 2 > Level 3
ContactsView All
Add New
Metro411
View Groups
Speed Dial List
V oice Dial List
Delete All
Contacts Count
Access your existing contacts list.
Add a new entry to your contacts list.
Find a phone number.
View your groups of contacts.
View your contacts assigned with speed dials.
View your contacts assigned with voice dials.
Access these options:
Delete All
Check how much contact space you have used.
.
Contacts Only, Groups Only
, and
28Contacts Menu
Access Contacts
Access Contacts List
1. From
View All
desired contact and scroll to highlight it.
2. Do one of the following:
–Press the
–Press the
details.
– Select
– Select
functions.
View Contact Details
1. From
2. At the contact details screen, highlight a
number, address or note.
3. Select the detail you want to view. For
example, to view a phone number, select
Options > View Number
Use Frequent List
With
Frequent List
of your most frequently called contacts. See
“Enable Frequent List” on page 71.
Use Fast Find
With
Fast Find
two keys to view closer matches in your
contacts list. See “Call Contact using Fast
Find” on page 71.
, enter the first letter of your
Send
key to call the contact.
OK
key to view the contact’s
New
to create a new contact.
Options
to access more
View All
, select a contact.
.
enabled, you can view 15
enabled, you can press one or
Add Contacts
Add Contacts from Home Screen
1. From the home screen, enter a phone
number to save (include the area code).
2. Select
3. Enter a name for the contact.
4. Enter additional phone numbers, email
5. When done, select
Add Contacts from Contacts Menu
1. From
2. Enter a primary number for the contact.
3. Enter additional phone numbers, email
4. When done, select
Add a Code or Extension
When saving the phone number of an
automated service, you may include a pause
for dialing an extension.
1. From the home screen, enter a phone
Save > Save New Contact
addresses, and other contact details. (Scroll
up or down to move through the contact
fields.)
Add New
contact. Scroll down to the next field when
done.
addresses, and other contact details. (Scroll
up or down to move through the contact
fields.)
number.
Save
, enter a name for the
Save
.
.
.
User Guide29
Loading...
+ 65 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.