Kyocera FS-1028, FS-1128MFP Service Bulletin 2HS-009

Service Bulletin
SB Number:
Subject:
SB 2HS-009
Vertical black streak on the left edge of the print-out
Creation Date: 30/09/2010
FS-1100/1300D/1350DN/1120D/1320DN/1370DN/1028MFP/
1128MFP
Phenomenon The vertical black streak may appear 1-2mm from the left edge of the print-out.
Cause Light from the laser scanner unit is reected by the shutter spring at the drum unit.
Solution The shape of the seal drum frame on the left side of the frame drum has been changed to
seal drum frame B to prevent the light reection from the shutter spring. The seal drum frame B is a component part of the drum and is not available as a individual part.
Parts
No. Old Parts
No.
1 302H493010
2H493010
2 302HS93011
2HS93011
3 302LZ93060
2LZ93060
New Parts No.
302H493011 2H493011
302HS93012 2HS93012
302LZ93061 2LZ93061
Description Q’TY Interchange-
ability
Old New Old New
DK-150 O O 1 1 O FS-1120D/1350DN/
DK-130 O O 1 1 O FS-1100/1300DN
DK-170 O O 1 1 O FS-1320DN/1370DN
SP Applicable Models
1028MFP/1128MFP
Classication
Field measure Please afx black insulation tape to the seal drum frame so that the width becomes 24.5mm.
Serial numbers of affected machines
Type Serial number
FS-1100/1300D/1350DN/ 1120D/1320DN/1370DN/ 1028MFP/1128MFP
Machines produced after the above mentioned production date, should not have the above mentioned
phenomena.
Entire stock rework
August 2010 production.
In-eld modication at next visit
Serial numbers of affected units
Type Serial number
DK-130 WUV0806162
DK-150 WJD0838728
DK-170 Not available
Units produced after the above mentioned serial numbers, should not have the above mentioned
phenomena.
In-eld modication by case
X
No modication necessary
KMIS Service Department, Kyocera Mita Europe A311 / SB 2HS-009
Page 1 of 2
Service Bulletin
Frame drum (DK-130)
Seal drum frame
Old condition: Seal drum frame
16mm
New condition: Seal drum frame
24.5mm
Field measure: Seal drum frame
Old Seal drum frame
16mm
Black insulation tape
24.5mm
Afx black insulation tape to the old seal drum frame so that the width is 24.5mm
KMIS Service Department, Kyocera Mita Europe A311 / SB 2HS-009
Page 2 of 2
Loading...