Kyocera FS-1028, FS-1128MFP Service Bulletin SB 2H9 0029 B335

Therefore, this wa

corrected

Check

SUM

Status

Date

Current

Ver.

Service Bulletin Ref. No.

Subject

(Page.1/2)

2H9-0029 (B335)

<Date> October 27, 2011

Firmware Upgrade (Main: Ver.024.005, FAX: 007.002)

FS-1x28MFP_02.00.0090_(2011-08-20)

Model

FS-1028MFP, FS-1128MFP

Topic

The firmware was upgraded as follows.

Content of Changes

Item Details

No.

Measures against the PDF direct

print failure with a certain PDF file

Measures against the KPDL error

Support for Mexico

-----------------------

The KDPL error occurred when directly printing a certain PDF file from a USB memory in duplex mode.

The Mexican country code was added.

Program No.

ENGINE 2H9_1000005001 3eaf 005.001 2010/11/29 - -

MAIN 2H9_2F00024005 - 024.005 2011/8/20 023.001 FS-1028MFP

MAIN 2JN_2F00024005 - 024.005 2011/8/20 023.001 FS-1128MFP

Ver.

Remark

Ctl No.

569714 TP-10-019 NP-Z10006

TP-090229, LWIK-12379

556269

MAIN

FAX

New upgrade

 New upgrade

SCANNER 2H9_1200004001 - 004.001 2011/2/22 -

Optional language KR

Optional language CN

Optional language BR

FAX BOOT/APL 2H9_5500007002 - 007.002

FAX BOOT/APL 2H9_5700N05001 - N05.001

For the KM sales companies, it is possible to download the firmware at the download center on the ESDC.net. When upgrading the firmware or replacing a board, please upgrade all kinds of the firmware to the latest version at the same time.

2H9_81KR001004 - 001.004

2H9_81CN001005 - 001.005

2H9_81BR001008 - 001.008

- -

- 006.001 Except KTST

- - For KTST

Korean (for KMKR)

Simplified Chinese (for KTST)

Brazilian Portuguese (for KMBR)

 New upgrade

KMC’s Classification Entire Stock Rework In-Field modification at next visit

In-Field modification by case No modification necessary

Field Measure: Please upgrade the firmware when the problem described above arises.

Serial Nos. of the Affected Machines: From the available timing in the September 2011* production

*The above is the plan at the present moment. Please note that this information is subject to change.

European Service & Development Center (ESDC)

KYOCERA MITA Europe B.V.

Therefore, this

s corrected

KPDL

(auto)

is set

file

corrected

with a certain data

error with a certain data

printing a certain PDF file

print failure

printed.

Therefore,

this was corrected.

PDF file

corrected.

chang

e of the resolution

print failure

address search failure

certain PDF file

corrected.

Service Bulletin Ref. No.

<Date> October 27, 2011

Content of Changes

Item Details

No.

DDNS registration failure DDNS could not be registered In the DHCP environment.

Measures against the F000 error with a PS data

SEM command failure when

Measures against the print position shifts with a certain

The F000 error appeared with a certain PS data. Therefore, this was corrected.

----------------------

Print position was shifted with a certain file. Therefore, this was corrected.

(Page.2/2)

2H9-0029 (B335)

Ctl No.

TC-10-038

510299 TP-10-232, #1115873

548199 TP-10-248: NP-Z10078

TP-090393 NP-Z09091

MAIN

Measures against the duplex print failure with a certain file

Measures against the charge counter reset

Measures against the missing upper left corner logo image

Measures against the print

Measures against the text output failure when directly

Measures against the drawing

Measures against the process lockup when printing a certain

Measures against the character pitch shift right after

Measures against the duplex

Measures against the FAX

Measures against the print failure when directly printing a

Upper part of the image on the second side was not printed when printing a certain file in duplex. Therefore, this was

The charge counter was reset to 0 when the original EEPROM was attached after replacement of the main board. Therefore, this was corrected.

---------------------

Undefined error appeared when printing a certain data. Therefore, this was corrected.

Wrong letters in a larger font were printed when directly printing a certain PDF file. Therefore, this was corrected.

When a part of large size drawing was printed, it was not

The process lockup occurred when printing a certain PDF file after the MacOS 10.6 Preview. Therefore, this was

----------------

Duplex output data was printed in simplex. Therefore, this was corrected.

----------------

Printing failed and "PDFConversionError" report was output when directly printing a certain PDF file. Therefore, this was

TP-10-164, NP-Z10059

551597 TC-11-005

553795 TP-11-016, #1183062

556915 TP-10-287, #1140708

554411 TP-11-055, KMA-D-1102-06

550328 TP-070090 NP-Z07031-2

556903 TP-10-252, UTS-10-039

556895 TP-10-279 NP-Z10088

556919 TP-10-282 NP-Z10090

547593 TF-11-002 NP-Z11008

559892 TP-10-190, #1082064,

MAIN

European Service & Development Center (ESDC)

KYOCERA MITA Europe B.V.