Kubota RTV-X1140 Operators Manual
OPERATOR'S MANUAL
UTILITY VEHICLE
AU . B . 3 - 3 . - . AK
PRINTED IN U.S.A.
Code No. K7621-7121-2
KUBOTA Corporation 2015
©
R
T
V
-
X
1
1
4
0
1AYAACZAP0010
READ AND SAVE THIS MANUAL
ABBREVIATION LIST
Abbreviations Definitions
2WD
4WD
API
ASABE
ASTM
DIN
fpm
HST
Km/h
MPH
m/s
PTO
RH/LH
ROPS
rpm
r/s
SAE
2 Wheel Drive
4 Wheel Drive
American Petroleum Institute
American Society of Agricultural and Biological Engineers, USA
American Society for Testing and Materials, USA
Deutsches Institut für Normung, GERMANY
Feet Per Minute
Hydrostatic Transmission
Kilometers Per Hour
Miles Per Hour
Meters Per Second
Power Take Off
Right-hand and left-hand sides are determined by facing
in the direction of forward travel
Roll-Over Protective Structures
Revolutions Per Minute
Revolutions Per Second
Society of Automotive Engineers, USA
KUBOTA Corporation is ···
Since its inception in 1890, KUBOTA Corporation has grown to
rank as one of the major firms in Japan.
To achieve this status, the company has through the years
diversified the range of its products and services to a remarkable
extent. 30 plants and 35,000 employees produce over 1,000
different items, large and small.
All these products and all the services which accompany them,
however, are unified by one central commitment. KUBOTA makes
products which, taken on a national scale, are basic necessities.
Products which are indispensable, products intended to help
individuals and nations fulfill the potential inherent in their
environment. For KUBOTA is the Basic Necessities Giant.
This potential includes water supply, food from the soil and from
the sea, industrial development, architecture and construction,
transportation.
VHT
Variable Hydro Transmission
California Proposition 65
WARNING
Engine exhaust, some of its constituents,
certain vehicle components and fluids,
contain or emit chemicals known to the
State of California to cause cancer and birth
defects or other reproductive harm.
IMPORTANT
The engine in this machine is equipped by the manufacture with a
standard spark arrester.
It is a violation of California Public Resource Code Section 4442 to
use or operate this engine on or near any forest-covered, brushcovered land, or grass- covered land unless the exhaust system is
equipped with a working spark arrester meeting state laws. Other
states or federal areas may have similar laws.
Thousands of people depend on KUBOTA's know-how, technology,
experience and customer service. You too can depend on
KUBOTA.
UNIVERSAL SYMBOLS
As a guide to the operation of your vehicle, various universal symbols have been utilized on the instruments and
controls. The symbols are shown below with an indication of their meaning.
Safety Alert Symbol
Seat Belt (2 point type)
Seat Belt (3 point type)
Diesel Fuel
Fuel-Level
Hourmeter/Elapsed Operating Hours
Engine Coolant-Temperature
Brake Fluid
Parking Brake
Battery Charging Condition
Engine Oil-Pressure
VHT Oil-Temperature
Turn Signal/Hazard
Engine-Stop
Engine-Run
Starter Control
Diesel Preheat/Glow Plugs(Low Temperature
Start Aid)
Differential Lock
Differential Lock Hold
Lift Cylinder-Retract
Lift Cylinder-Extend
Lift Cylinder-Float
Steering Wheel-Tilt Control
Hazard Warning Lights
Headlight
Audible Warning Device
Fast
Slow
4-Wheel Drive-On
Lock
Unlock
FOREWORD
You are now the proud owner of a KUBOTA Vehicle. This vehicle is a product of
KUBOTA quality engineering and manufacturing. It is made of excellent materials
and under a rigid quality control system. It will give you long, satisfactory service.
To obtain the best use of your vehicle, please read this manual carefully. It will help
you become familiar with the operation of the vehicle and contains many helpful
hints about vehicle maintenance. This manual contains instructions for minor
maintenance, but information about major repairs is outlined in the KUBOTA Work
Shop Manual and should be performed only by a KUBOTA Dealer Technician. It is
KUBOTA's policy to utilize as quickly as possible every advance in our research.
The immediate use of new techniques in the manufacture of products may cause
some small parts of this manual to become outdated. KUBOTA distributors and
dealers will have the most up-to-date information. Please do not hesitate to consult
with them.
3
This symbol, the industry's ''Safety Alert Symbol'', is used throughout this manual
and on labels on the machine itself to warn of the possibility of personal injury.
Read these instructions carefully. It is essential that you read the instructions and
safety regulations before you attempt to assemble or use this unit.
3
3
3
IMPORTANT :
NOTE :
DANGER :
WARNING :
CAUTION :
Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in minor or moderate injury.
Indicates that equipment or property damage could result if
instructions are not followed.
Gives helpful information.
SAFETY FIRST
CONTENTS
SAFE OPERATION ............................................................................................ -1
SERVICING OF VEHICLE........................................................................................... 1
SPECIFICATIONS....................................................................................................... 2
SPECIFICATION TABLE ......................................................................................... 2
TRAVELING SPEEDS ............................................................................................. 3
VEHICLE LIMITATIONS.............................................................................................. 4
INSTRUMENT PANEL AND CONTROLS................................................................... 5
LOCATION OF PARTS............................................................................................ 5
PRE-OPERATION CHECK ......................................................................................... 9
DAILY CHECK ......................................................................................................... 9
OPERATING THE ENGINE....................................................................................... 10
STARTING THE ENGINE ...................................................................................... 10
Cold Weather Starting ....................................................................................................12
Engine Hand Throttle......................................................................................................12
Block Heater ...................................................................................................................12
STOPPING THE ENGINE...................................................................................... 13
WARMING UP ....................................................................................................... 13
Warm-Up Transmission Oil in the Low Temperature Range.......................................... 13
JUMP STARTING .................................................................................................. 14
OPERATING THE VEHICLE ..................................................................................... 15
OPERATING NEW VEHICLE ................................................................................ 15
Do not Operate the Vehicle at Full Speed for the First 50 Hours ...................................15
Changing Lubricating Oil for New Vehicles .................................................................... 15
STARTING ............................................................................................................. 15
Seat Belt ......................................................................................................................... 15
Tilt Steering Wheel .........................................................................................................16
Seat Slide Lever .............................................................................................................16
Head Light Switch........................................................................................................... 16
Hazard Light Switch........................................................................................................17
Turn Signal Light Switch.................................................................................................17
Horn Button.....................................................................................................................17
Work Light (Front)........................................................................................................... 18
Work Light (Rear) ...........................................................................................................18
Brake Pedal ....................................................................................................................18
Range Gear Shift Lever..................................................................................................19
4WD Lever......................................................................................................................19
Parking Brake Lever ....................................................................................................... 20
Speed Control Pedal.......................................................................................................20
STOPPING............................................................................................................. 21
Stopping.......................................................................................................................... 21
CHECK DURING DRIVING ................................................................................... 21
Immediately Stop the Engine if:......................................................................................21
Easy Checker(TM).......................................................................................................... 21
CONTENTS
Fuel Gauge.....................................................................................................................22
Coolant Temperature Gauge..........................................................................................22
Hourmeter and Odometer...............................................................................................23
Speedometer .................................................................................................................. 23
PARKING ............................................................................................................... 24
Parking Brake Lever ....................................................................................................... 24
ACCESSORY......................................................................................................... 24
12V Electric Outlet..........................................................................................................24
Utility Box........................................................................................................................24
Glove Box (Std.) and Glove Box Cover .......................................................................... 25
OPERATING TECHNIQUES ................................................................................. 25
Differential Lock..............................................................................................................25
Directions for Use of Power Steering..............................................................................26
Unfamiliar Terrain ........................................................................................................... 26
Driving in Reverse ..........................................................................................................26
Driving in "4WD" .............................................................................................................27
Turning the Vehicle.........................................................................................................27
Hills.................................................................................................................................28
Traversing Hillsides ........................................................................................................28
Sliding and Skidding ....................................................................................................... 28
Driving through Water..................................................................................................... 29
OPERATING HAND THROTTLE........................................................................... 29
STATIONARY HYDRAULIC OUTLET ................................................................... 29
SEATING AND CARGO BED.................................................................................... 30
CARGO BED.......................................................................................................... 30
General Caution.............................................................................................................. 30
Max. Cargo Load ............................................................................................................ 30
CHANGING SEATING AND CARGO BED............................................................ 32
Cargo Bed Tailgate......................................................................................................... 34
Raising and Lowering the Cargo Bed.............................................................................34
HYDRAULIC OUTLET............................................................................................... 36
HYDRAULIC OUTLET ........................................................................................... 36
Hydraulic Outlet Lever .................................................................................................... 36
Hydraulic Outlet Valve Coupler Connecting and Disconnecting..................................... 37
TIRES AND WHEELS ............................................................................................... 38
TIRES..................................................................................................................... 38
Inflation Pressure............................................................................................................38
Tire Type and Use .......................................................................................................... 38
WHEELS ................................................................................................................ 39
SHOCK ABSORBERS ........................................................................................... 39
Shock Absorber Spring Adjustment................................................................................ 39
TOWING AND TRANSPORTING.............................................................................. 40
TOWING AND TRANSPORTING .......................................................................... 40
Rear Trailer Hitch............................................................................................................40
Front Trailer Hitch...........................................................................................................40
Winch Mount Bracket......................................................................................................41
Transport the Vehicle Safely...........................................................................................41
MAINTENANCE......................................................................................................... 42
CONTENTS
SERVICE INTERVALS .......................................................................................... 42
LUBRICANTS, FUEL AND COOLANT .................................................................. 45
PERIODIC SERVICE................................................................................................. 49
HOW TO OPEN THE HOOD AND TILT THE SEAT.............................................. 49
Hood ...............................................................................................................................49
Seat ................................................................................................................................49
HOW TO RAISE THE CARGO BED...................................................................... 50
Raising and Lowering the Cargo Bed.............................................................................50
JACK-UP POINT.................................................................................................... 50
Front End........................................................................................................................50
Rear End......................................................................................................................... 51
DAILY CHECK ....................................................................................................... 51
Walk Around Inspection.................................................................................................. 51
Checking around Engine ................................................................................................51
Checking and Refueling..................................................................................................52
Checking Engine Oil Level..............................................................................................52
Checking Transmission Fluid Level................................................................................53
Checking Hydraulic Oil Tank Level................................................................................. 53
Checking Coolant Level.................................................................................................. 54
Cleaning Radiator Screen...............................................................................................54
Cleaning Oil Cooler Net..................................................................................................55
Checking Brake Fluid Level............................................................................................55
Checking Brake Pedal .................................................................................................... 56
Checking Parking Brake ................................................................................................. 56
Checking Easy Checker(TM).......................................................................................... 56
Checking Head Light, Turn Signal Light (if equipped) etc. .............................................56
Checking Seat Belt and ROPS.......................................................................................56
Checking Joint Boot........................................................................................................ 57
Checking Tire Inflation Pressure.....................................................................................58
Checking Backup Beeper ............................................................................................... 58
EVERY 50 HOURS ................................................................................................ 59
Greasing .........................................................................................................................59
Checking Engine Start System.......................................................................................60
EVERY 100 HOURS .............................................................................................. 61
Checking VHT Neutral Spring.........................................................................................61
Checking VHT Pressure Release...................................................................................61
Checking Wheel Fastener Torque..................................................................................62
Cleaning Air Cleaner Primary Element ........................................................................... 62
Adjusting Alternator Belt Tension ...................................................................................63
Checking Fuel Filter........................................................................................................ 64
Checking Battery Condition ............................................................................................ 65
Adjusting Toe-in.............................................................................................................. 66
Cleaning Muffler..............................................................................................................67
EVERY 200 HOURS .............................................................................................. 68
Adjusting Parking Brake .................................................................................................68
Greasing .........................................................................................................................69
Replacing Engine Oil Filter ............................................................................................. 69
Changing Engine Oil....................................................................................................... 70
Replacing Transmission Oil Filter [VHT]......................................................................... 71
Replacing Transmission Oil Filter [SUCTION]................................................................ 71
Changing Hydraulic Tank Oil..........................................................................................72
CONTENTS
Checking Brake Pedal .................................................................................................... 73
Checking Front Brake Case............................................................................................73
Checking Brake Light Switch..........................................................................................74
EVERY 300 HOURS .............................................................................................. 74
Checking Tire..................................................................................................................74
EVERY 400 HOURS .............................................................................................. 75
Changing Front Knuckle Case Oil ..................................................................................75
Changing Transmission Fluid ......................................................................................... 75
Changing Front Axle Case Oil ........................................................................................ 76
Replacing Fuel Filter....................................................................................................... 76
EVERY 800 HOURS .............................................................................................. 77
Adjusting Engine Valve Clearance .................................................................................77
EVERY 1000 HOURS or EVERY 1 YEAR............................................................. 77
Replacing Air Cleaner Primary Element and Secondary Element.................................. 77
EVERY 1500 HOURS ............................................................................................ 77
Checking Fuel Injection Nozzle Injection Pressure.........................................................77
EVERY 2000 HOURS or EVERY 2 YEARS .......................................................... 77
Flushing Cooling System and Changing Coolant ...........................................................77
Anti-Freeze .....................................................................................................................78
EVERY 3000 HOURS ............................................................................................ 79
Checking Injection Pump................................................................................................79
EVERY 1 YEAR ..................................................................................................... 79
Checking Fuel Lines ....................................................................................................... 79
Checking Hydraulic Oil Line............................................................................................79
Checking Radiator Hose, Pipe and Clamp ..................................................................... 80
Checking Intake Air Line................................................................................................. 81
Checking Engine Breather Hose .................................................................................... 82
Checking Brake Hose and Pipe...................................................................................... 82
EVERY 2 YEARS................................................................................................... 83
Changing Brake Fluid ..................................................................................................... 83
EVERY 4 YEARS................................................................................................... 83
Replacing Hydraulic Oil Line...........................................................................................83
Replacing Radiator Hose................................................................................................83
Replacing Fuel Hose ......................................................................................................83
Replacing Engine Breather Hose ...................................................................................83
Replacing Brake Master Cylinder (Inner Parts) ..............................................................83
Replacing Front Brake Seal............................................................................................ 83
Replacing Rear Brake Cylinder Seal .............................................................................. 83
Replacing Intake Air Line................................................................................................ 83
Replacing Brake Hose and Pipe..................................................................................... 83
SERVICE AS REQUIRED...................................................................................... 84
Bleeding Fuel System..................................................................................................... 84
Cleaning around Engine ................................................................................................. 84
Replacing Fuse...............................................................................................................84
Replacing Slow-Blow Fuses ........................................................................................... 86
Replacing Light Bulb.......................................................................................................86
Checking Hydraulic Tank Suction Strainer .....................................................................86
STORAGE ................................................................................................................. 87
VEHICLE STORAGE ............................................................................................. 87
REMOVING THE VEHICLE FROM STORAGE..................................................... 87
CONTENTS
TROUBLESHOOTING............................................................................................... 88
ENGINE TROUBLESHOOTING ............................................................................ 88
BATTERY TROUBLESHOOTING ......................................................................... 89
MACHINE TROUBLESHOOTING ......................................................................... 90
OPTIONS................................................................................................................... 91
INDEX........................................................................................................................ 92
SAFE OPERATION
-1SAFE OPERATION
Careful operation is your best insurance against an
accident.
Read and understand this Operator's Manual carefully
before operating the vehicle.
All operators, no matter how much experience they may
have, should read this and other related manuals before
operating the vehicle or any implement attached to it. It is
the owner's obligation to instruct all operators in safe
operation.
1. BEFORE OPERATING THE VEHICLE
1. Know your equipment and its limitations. Read this
entire manual before attempting to start and operate
the vehicle.
2. Pay special attention to the Danger, Warning and
Caution labels on the vehicle.
3. Do not remove Roll-Over Protective Structures
(ROPS) for any application and fasten seat belts at all
times. This combination will reduce the risk of serious
injury or death, should the vehicle be upset.
If the ROPS is loosened or removed for any reason,
make sure that all parts are reinstalled correctly before
operating the vehicle.
Never modify or repair a ROPS because welding,
bending, drilling, grinding, or cutting may weaken the
structure.
If any structural member of the ROPS is damaged,
replace the entire structure at your local KUBOTA
Dealer.
(1) ROPS
(2) Seat belt
6. Carefully check the vicinity before operating the
vehicle or any implement attached to it. Check for
overhead clearance which may interfere with the CAB
or ROPS. Do not allow any bystanders around or near
the vehicle during operation.
7. Never allow anyone under age 16 or without a valid
driver's license to operate this vehicle.
8. Before allowing other people to use your vehicle,
explain how to operate and have them read this
manual before operation.
9. Never wear loose, torn, or bulky clothing around the
vehicle. It may catch on moving parts or controls,
leading to the risk of an accident. Use additional safety
items, e.g. helmet, safety boots or shoes, eye and
hearing protection, gloves, etc., as appropriate or
required.
10.This vehicle is for off road use only.
KUBOTA does not recommend operating on public
roads.
11.In addition to the driver, only 1 passenger should ride
in the vehicle on row 1 seating mode and 3
passengers maximum for row 2 seating mode.
Minimum age for passenger is 5 years old.
12.Keep all shields in place and stay away from all
moving parts.
13.Check brakes, speed control pedal, and other
mechanical parts for improper adjustment and wear.
Replace worn or damaged parts promptly. Check the
tightness of all nuts and bolts regularly. (For further
details, see "MAINTENANCE" section.)
14.Keep your vehicle clean. Dirt, grease, and trash build
up may contribute to fires and lead to personal injury.
15.Use only implements meeting the specifications listed
under "VEHICLE LIMITATIONS" in this manual or
implements approved by KUBOTA.
16.The maximum cargo capacity of this vehicle is 500 kg
(1100 lbs.) for row 1 seating mode and 300 kg (661
lbs.) for row 2 seating mode. Reduce cargo capacity to
match operating conditions.
Avoid top-heavy loading and ensure that the center-ofgravity remains as low as possible.
Do not carry anything which sticks outside the cargo
bed.
17.Do not modify the vehicle. Unauthorized modification
may affect the function of the vehicle, which may result
in personal injury.
18.Do not carry small children on lap.
4. Always use the seat belts. Check the seat belts
regularly and replace if frayed or damaged.
5. Do not operate the vehicle or any implement attached
to it while under the influence of alcohol, medication,
controlled substances or while fatigued.
SAFE OPERATION-2
2. OPERATING THE VEHICLE
Operator safety is a priority. Safe operation, specifically
with respect to overturning hazards, entails understanding
the equipment and environmental conditions at the time of
use. Some prohibited uses which can affect overturning
hazards include traveling and turning with implements
and loads carried too high etc. This manual sets forth
some of the obvious risks, but the list is not, and cannot
be, exhaustive. It is the operator's responsibility to be alert
for any equipment or environmental condition that could
compromise safe operation.
C Starting
1. Always sit in the operator's seat when starting engine
or operating levers or controls.
2. Before starting the engine, make sure that all levers
are in their neutral positions, that the parking brake is
engaged, and that the hydraulic outlet (if equipped) is
OFF. And make sure the engine hand throttle (if
equipped) is in its idle engine speed position.
3. Do not start engine by shorting across starter
terminals or bypassing the safety start switch. The
vehicle may start in gear and move if normal starting
circuitry is bypassed.
4. Be sure that the operator (and passenger) are properly
positioned and seat belts are appropriately fastened.
5. Do not operate or idle engine in a non-ventilated area.
Carbon monoxide gas is colorless, odorless, and
deadly.
C Operating
1. Always wear the seat belt when operating the unit.
2. Do not wear headphones while operating.
3. Pull only from the trailer hitch (if equipped). Never hitch
to any other point except trailer hitch; such
arrangements will increase the risk of serious personal
injury or death due to a vehicle upset.
5. Avoid sudden starts. To avoid rollovers, slow down
when turning, on uneven ground, and before stopping.
While increasing engine speed with the engine hand
throttle (if equipped), operate the speed control pedal
with great care to avoid sudden starts.
6. The vehicle cannot turn with the differential locked and
attempting to do so could be dangerous.
7. Do not operate near ditches, holes, embankments, or
other ground surface features which may collapse
under the vehicle's weight. The risk of vehicle upset is
even higher when the ground is loose or wet.
8. Watch where you are going at all times. Watch for and
avoid obstacles. Be alert at row ends, near trees, and
other obstructions.
9. When working in groups, always let the others know
what you are going to do before you do it.
10.Never try to get on or off a moving vehicle.
11.Do not stand between vehicle and trailer unless
parking brake is applied.
12.Operate in a manner consistent with loading and
weight configuration and operating terrain.
C Safety for children
Tragedy can occur if the operator is not alert to the
presence of children. Children generally are attracted to
vehicles and the work they do.
1. Never assume that children will remain where you last
saw them.
2. Keep children out of the work area and under the
watchful eye of another responsible adult.
3. Be alert and shut your vehicle down if children enter
the work area.
4. Never carry children in the cargo bed. There is no safe
place for them to ride. No person under the age of 5
may ride as a passenger in this vehicle. A passenger
under 5 years of age requires special restraints which
are not available with this vehicle.
5. Never allow children to operate the vehicle even under
adult supervision.
6. Never allow children to play on the vehicle or on the
implement.
7. Use extra caution when backing up. Look behind and
down to make sure area is clear before moving.
8. Whenever possible, park your vehicle on a firm, flat
and level surface. If this is not possible, park it across
the slope. Set the parking brake(s), lower the
implements to the ground, remove the key from the
ignition and chock the wheels.
(1) Trailer hitch (if equipped)
4. Keep all shields and guards in place. Replace any that
are missing or damaged.
C Operating on slopes
Slopes are a major factor related to loss-of-control and tipover accidents, which can result in severe injury or death.
All slopes require extra caution.
1. Travel straight up or down hill.
2. Reduce load when operating on hilly or over rough
terrain.
3. Keep front wheels straight at crest of hill or going over
bumps.
-3SAFE OPERATION
4. Do not stop or start suddenly when going uphill or
downhill. Be especially cautious when changing
direction on slopes.
5. If vehicle stops or loses power going up a hill, lock
parking brake to hold vehicle on slope. Maintain
direction of travel and release brake slowly. Back
straight downhill while maintaining control. Do not turn
vehicle sideways. Vehicle is more stable in a straight
forward or rearward position.
6. When riding on soft terrain, turn front wheels slightly
uphill to keep vehicle on a straight line across the hill.
7. If the vehicle begins to tip, turn front wheels downhill to
gain control before proceeding.
(1) To avoid upsets, always back up steep slopes. If
you cannot back up the slope or if you feel uneasy
on it, do not operate on it. Stay off slopes too
steep for safe operation.
(2) Driving forward out of a ditch, mired condition or
up a steep slope increases the risk of a vehicle to
be upset backward. Always back out of these
situations. Extra caution is required with 4-wheel
drive mode because the increased traction can
give the operator false confidence in the vehicle's
ability to climb slopes.
(3) Keep all movement on slopes slow and gradual.
Do not make sudden changes in speed, direction
or apply brake and make sudden motions of the
steering wheel.
(4) Special attention should be made to the weight
and location of implements and loads as such will
affect the stability of the vehicle.
C Operation in inclement conditions
1. Only operate during daylight or with good artificial
light.
2. Operate vehicle in an open, unobstructed area.
3. Use helmet and/or protective gear as appropriate or
required for the operating conditions.
4. Reduce speed according to trail, terrain and visibility
conditions.
5. Always drive within the limit of visibility. Slow down
near crest of hill until getting a clear view of the other
side.
6. Stay alert for holes, rocks and other hidden hazards in
the terrain.
7. Never cross any body of water where depth may be
unknown to the operator (Deep water is considered
anything in excess the bottom edge of the axle cap).
Choose a course within the waterway where both
banks have a gradual incline. Cross at a point known
to be safe.
C Driving the vehicle at high speeds
1. Check the front wheel engagement. The braking
characteristics are different between 2 and 4 wheel
drive. Be aware of the difference and use carefully.
2. Always slow the vehicle down before turning. Turning
at high speed may tip the vehicle over.
3. Turn the headlights on.
4. Drive at speeds that allow you to maintain control at all
times.
5. Do not apply the differential lock while traveling at high
speeds. The vehicle may run out of control.
6. Avoid sudden motions of the steering wheel as they
can lead to a dangerous loss of stability. The risk is
especially great when the vehicle is traveling at high
speeds.
C Other miscellaneous
1. Clean platform if dirty and remove any debris from
around foot controls.
2. Always keep both hands on the steering wheel.
3. Always keep arms and legs inside the operating
compartment.
4. Never operate the vehicle while standing.
5. Do not tow a cart with any riders on it.
6. Never attempt wheelies, jumps or other stunts.
7. Never operate with person in the cargo bed.
3. HAULING LOADS IN THE CARGO BED
1. No riders in cargo bed or anywhere else.
2. Do not overload vehicle. Securely anchor all loads.
3. Be sure load is evenly distributed.
4. Reduce cargo capacity when operating on rough or
hilly terrain.
5. Balance loads evenly and secure them. Braking could
shift the load and affect vehicle stability.
6. Never operate vehicle with the cargo bed raised.
7. Operate cargo bed dump with vehicle stationary and
parking brake locked. Do not dump while moving.
8. Operate hydraulic dump on level ground only.
9. Operate dump from operator's seat only.
10.Do not place hands or body under the cargo bed when
lowering bed.
4. OPERATING HYDRAULIC OUTLET
DRIVEN EQUIPMENT (IF EQUIPPED)
1. Before installing or using hydraulic outlet driven
equipment, read the manufacturer's manual and
review the safety labels attached to the equipment.
2. Wait until all moving components have completely
stopped before getting off the vehicle, connecting,
disconnecting, adjusting, cleaning, or servicing any
hydraulically driven equipment.
3. When operating stationary hydraulically driven
equipment, always apply the vehicle parking brake
and place chocks behind and in front of the rear
wheels. Stay clear of all rotating parts. Never step over
rotating parts.
SAFE OPERATION-4
(1) Hydraulic outlet (if equipped)
5. PARKING THE VEHICLE
1. Make sure the HYDRAULIC OUTLET is off (if
equipped), lower all implements to the ground, place
all control levers in their neutral positions, set the
parking brake, stop the engine, and remove the key.
2. Make sure that the vehicle has come to a complete
stop before dismounting.
3. Avoid parking on steep slopes, if at all possible park on
a firm and level surface; if not, park across a slope with
chock the wheels and always with attachment on the
ground.
Failure to comply with this warning may allow the
vehicle to move and could cause injury or death.
4. Tie down in accordance with all local and Federal
regulations.
7. SERVICING THE VEHICLE
Before servicing the vehicle, park it on a firm, flat and level
surface, set the parking brake, lower all implements to the
ground, place the range gear shift lever in neutral, stop the
engine and remove the key.
1. Allow the vehicle time to cool off before working on or
near the engine, muffler, radiator, etc.
2. Always stop the engine before refueling. Avoid spills
and overfilling.
3. Do not smoke when working around battery or when
refueling. Keep all sparks and flames away from
battery and fuel tank. The battery presents an
explosive hazard, because it gives off hydrogen and
oxygen especially when recharging.
4. Before "jump starting" a dead battery, read and follow
all of the instructions. (See "JUMP STARTING" in
"OPERATING THE ENGINE" section.)
5. Keep first aid kit and fire extinguisher handy at all
times.
6. Disconnect the battery's ground cable before working
on or near electric components.
7. To avoid the possibility of battery explosion, do not use
or charge the refillable type battery if the fluid level is
below the LOWER (lower limit level) mark. Check the
fluid level regularly and add distilled water as required
so that the fluid level is between the UPPER and
LOWER marks.
8. To avoid sparks from an accidental short circuit,
always disconnect the battery's ground cable (-) first
and reconnect it last.
(1) Parking brake lever
6. TRANSPORTING
1. Disengage power to attachment(s) when transporting
or not in use.
2. Do not tow this vehicle. Use a suitable truck or trailer
when transporting on public roads.
3. Use extra care when loading or unloading the vehicle
into a trailer or truck.
(1) Battery
9. Do not remove radiator cap while coolant is hot. When
cool, slowly rotate cap to the first stop and allow
sufficient time for excess pressure to escape before
removing the cap completely. This vehicle has a
coolant recovery tank, add coolant or water to the tank,
not the radiator. (See "Checking Coolant Level" in
"DAILY CHECK" in "PERIODIC SERVICE" section.)
10.Do not attempt to mount a tire on a rim. This should be
done by a qualified person with the proper equipment.
11.Always maintain the correct tire pressure. Do not
inflate tires above the recommended pressure shown
in the operator's manual.
-5SAFE OPERATION
16.Fluid escaping from pinholes may be invisible. Do not
use hands to search for suspected leaks; use a piece
of cardboard or wood. Use of safety goggles or other
eye protection is also highly recommended. If injured
by escaping fluid, see a medical doctor at once. This
fluid will produce gangrene or severe allergic reaction.
12.Securely support the vehicle when changing wheels.
13.Make sure that wheel bolts and nuts have been
tightened to the specified torque.
14.Do not work under any hydraulically supported
devices. They can settle, suddenly leak down, or be
accidentally lowered. If it is necessary to work under
the vehicle or any vehicle elements for servicing or
adjustment, securely support them with stands or
suitable blocking beforehand.
15.Escaping hydraulic fluid under pressure has sufficient
force to penetrate skin causing serious personal injury.
Before disconnecting hydraulic lines, be sure to
release all residual pressure. Before applying
pressure to the hydraulic system, make sure that all
connections are tight and that all lines, pipes, and
hoses are free of damage.
"High pressure fluid - Injection into body" hazard
warning.
(1) Cardboard
(2) Hydraulic line
(3) Magnifying glass
17.Waste products such as used oil, fuel, hydraulic fluid,
and batteries, can harm the environment, people, pets
and wildlife. Please dispose properly and in
accordance with all local and Federal regulations.
See your local Recycling Center or KUBOTA Dealer to
learn how to recycle or get rid of waste products.
SAFE OPERATION-6
8. DANGER, WARNING AND CAUTION LABELS
-7SAFE OPERATION
SAFE OPERATION-8
-9SAFE OPERATION
SAFE OPERATION-10
9. CARE OF DANGER, WARNING AND CAUTION LABELS
1. Keep danger, warning and caution labels clean and free from obstructing material.
2. Clean danger, warning and caution labels with soap and water, dry with a soft cloth.
3. Replace damaged or missing danger, warning and caution labels with new labels from your local KUBOTA Dealer.
4. If a component with danger, warning and caution label(s) affixed is replaced with new part, make sure new label(s)
is(are) attached in the same location(s) as the replaced component.
5. Mount new danger, warning and caution labels by applying on a clean dry surface and pressing any bubbles to outside
edge.
SERVICING OF VEHICLE
Your dealer is knowledgeable of your new vehicle and has
the desire to help you get the most value from it. After
reading this manual thoroughly, you will find that you can
do some of the regular maintenance by yourself.
However, when in need of parts or major service, be sure
to see your KUBOTA Dealer.
For service, contact the KUBOTA Dealership from which
you purchased your vehicle or your local KUBOTA
Dealer.
When in need of parts, be prepared to give your dealer the
serial number of the vehicle, engine, transmission and
ROPS.
Locate the serial numbers now and record them in the
space provided.
Type Serial No.
(1) Vehicle identification plate
(2) Product identification number
(3) ROPS serial number
1SERVICING OF VEHICLE
Vehicle
Engine
Transmission
ROPS
Product Identification
Number
Date of Purchase
Name of Dealer
(To be filled in by purchaser)
C Warranty
This vehicle is warranted under the Kubota Limited
Express warranty a copy of which may be obtained from
your selling dealer. No warranty shall, however, apply if
the vehicle has not been handled according to the
instruction given in the Operator's Manual should read,
even if it is within the warranty period.
C Scrapping the vehicle and its procedure
To put the vehicle out of service, follow the local rules and
regulations of the country or territory where you scrap it. If
you have questions, consult your local KUBOTA Dealer.
(1) Engine serial number
(2) Transmission assy serial number
2 SPECIFICATIONS
SPECIFICATIONS
SPECIFICATION TABLE
Model
Make D1105
Type 3 cylinders, 4-cycle, diesel, OHV
Displacement L (cu. in.) 1.123 (68.53)
Engine
Horsepower (Gross) kW (HP) 18.5 (24.8)
Rated revolution rpm 3000
Low idling revolution rpm 1400 to 1500
Fuel Capacity L (U.S.gals) 30 (7.9)
Transmission Continuously variable hydro transmission (VHT)
Wheels, Drive system 4, Rear 2WD or 4WD
Differential lock Standard; foot operated with mechanical holder
Gear selection Hi-Low range forward, neutral, reverse
Front / Rear Wet disk brake
Brakes
Parking brake Rear wheel, hand lever
Steering Hydrostatic power
Front
Suspension
Rear
Worksite/Orange Worksite/Camo
Independent, Dual A-Arm type
RTV-X1140
Length mm (in.) 3610 (142.1)
Width mm (in.) 1605 (63.2)
Height, overall mm (in.) 2025 (79.7)
Front tread centers mm (in.)
Dimensions
Max. Rolling weight
(Towing capacity)
Payload capacity kg (lbs.) 739 (1629)
Weight kg (lbs.) 1075 (2370)
Gross Vehicle Weight
Rating (GVWR)
Rear tread centers mm (in.)
Wheelbase mm (in.) 2495 (98.2)
Ground
clearance
Turning diameter m (ft) 10.4 (34.1)
front axle mm (in.) 285 (11.2)
rear axle mm (in.) 240 (9.4)
kg (lbs.) Rear: 590 (1300), Front: 295 (650)
kg (lbs.) 1814 (3999)
1280 (50.4) HDWS, ATV
3SPECIFICATIONS
Model
Width mm (in.) 1465 (57.7)
Length
(row 1 / row 2)
Depth mm (in.) 285 (11.2)
Cargo bed
Sound level, operator ear db (A) 84
Tires
Tilt steering wheel Std.
Seat belt 2 point type
Volume
(row 1 / row 2)
Bed height
(unloaded)
Cargo bed capacity
(row 1 / row 2)
Front
Rear
mm (in.) 1300 (51.1) / 660 (26.0)
m (cu.ft.) 0.54 (19.1) / 0.28 (9.9)
mm (in.) 900 (35.4)
kg (lbs.) 500 (1102) / 300 (661)
Worksite/Orange Worksite/Camo
RTV-X1140
25x10-12 ATV, 6PLY
25x10-12 HDWS, 6PLY
25x10-12 ATV, 6PLY
25x10-12 HDWS, 6PLY
Front deluxe guard Std. -
Front deluxe guard with light guard - Std.
Body color Orange Camo
Bed lift Std. Std.
Speedometer Std. Std.
Seat slide Std. Std.
A The company reserves the right to change the specifications without notice.
A The values in "Ground clearance" and "Weight" are those of the machine equipped with the tires in the table above.
TRAVELING SPEEDS
Traveling speeds
RTV-X1140
Range gear
shift lever
Gear position
Low km/h (mph) 24 (15)
High km/h (mph) 40 (25)
Reverse km/h (mph) 27 (17)
4 VEHICLE LIMITATIONS
VEHICLE LIMITATIONS
The KUBOTA Vehicle has been thoroughly tested for proper performance with implements sold or approved by KUBOTA.
Use with implements which are not sold or approved by KUBOTA and which exceed the maximum specifications listed
below, or which are otherwise unfit for use with the KUBOTA Vehicle may result in malfunctions or failures of the vehicle,
damage to other property and injury to the operator or others. [Any malfunctions or failures of the vehicle resulting from use
with improper implements are not covered by the warranty]
Max. Cargo loading weight (W1) should not exceed "CBC" or "PCL".
PCL (Permissible Cargo load) is determined by the following calculus equation.
PCL = PC - (operator + passenger + opt. + acc. + cabin) weight
Cargo bed
Rear trailer hitch
Front trailer hitch
Payload capacity 739 kg (1629 lbs.)
CBC (Cargo bed capacity): [Row 1 SEATING MODE] 500 kg (1102 lbs.)
[Row 2 SEATING MODE] 300 kg (661 lbs.)
PC: Payload Capacity
opt.: option
acc.: accessory
cabin [if equipped]: 265 kg (584 lbs.)
Max. rolling weight (W2): 590 kg (1301 lbs.)
Max. tongue weight (W3): 50 kg (110 lbs.)
Max. rolling weight (W4): 295 kg (650 lbs.)
Max. tongue weight (W5): 50 kg (110 lbs.)
Rolling weight: Trailer weight + Trailer load
A Above mentioned specifications are based on level ground condition.
5INSTRUMENT PANEL AND CONTROLS
INSTRUMENT PANEL AND CONTROLS
LOCATION OF PARTS
ILLUSTRATED CONTENTS
(1) Front work light (if equipped).......................... 18
(2) ROPS............................................................. --
(3) Hazard / Turn signal light (if equipped)........... 17, 17
(4) Front hood...................................................... 49
(5) Headlights...................................................... 16
(6) Winch mount bracket...................................... 41
(7) Front trailer hitch bracket................................ 40
(8) Battery........................................................... 65
(9) Front guard.................................................... --
(10) Front trailer hitch (if equipped)...................... 40
6 INSTRUMENT PANEL AND CONTROLS
ILLUSTRATED CONTENTS ILLUSTRATED CONTENTS
(1) Steering wheel................................................. -- (13) 12V accessory plug........................................ 24
(2) Cup holder........................................................ -- (14) Glove box cover............................................. 25
(3) Horn button...................................................... 17 (15) Liquid crystal display...................................... 21
(4) Key switch........................................................ -- (16) Speedometer................................................. 23
(5) Turn signal light switch (if equipped)................. 17 (17) Hourmeter...................................................... 23
(6) Head light switch.............................................. 16 (18) Coolant temperature gauge............................ 22
(7) Hazard light switch (if equipped)....................... 17 (19) Fuel gauge..................................................... 22
(8) Brake pedal...................................................... 18 (20) Turn signal indicator (if equipped) /
(9) Speed control pedal......................................... 20 Hazard signal indicator (if equipped).............. 17, 17
(10) Range gear shift lever..................................... 19 (21) 4WD indicator................................................. 19
(11) Tilt lever.......................................................... 16 (22) Easy Checker(TM)......................................... 21
(12) Parking brake lever........................................ 20
7INSTRUMENT PANEL AND CONTROLS
ILLUSTRATED CONTENTS ILLUSTRATED CONTENTS
(1) Seat belts......................................................... 15 (7) Differential lock holder...................................... 25
(2) Operator's seat................................................. 49 (8) Hydraulic lift cylinder lever or Hydraulic outlet
(3) Passenger seat................................................ 49 lever (if equipped)............................................. 34, 36
(4) Seat slide lever................................................. 16 (9) Engine hand throttle (if equipped)..................... 29
(5) 4WD lever........................................................ 19 (10) Rear bracket latch.......................................... 32
(6) Differential lock pedal....................................... 25 (11) Rear seat........................................................ 32
8 INSTRUMENT PANEL AND CONTROLS
ILLUSTRATED CONTENTS ILLUSTRATED CONTENTS
(1) Cargo bed........................................................ 30 (7) Fuel tank cap.................................................... 52
(2) Tailgate............................................................ 34 (8) Rear trailer hitch (if equipped)........................... 40
(3) Tail lamp (Combination lamp if equipped)......... 16 (9) Hydraulic outlet (if equipped)............................ 36
(4) Muffler.............................................................. 67 (10) Rear work light (if equipped)........................... 18
(5) Rear trailer hitch bracket................................... 40 (11) Backup beeper (if equipped)........................... 58
(6) Handgrip.......................................................... -- (12) Mirror.............................................................. --
PRE-OPERATION CHECK
DAILY CHECK
To prevent trouble from occurring, it is important to know
the condition of the vehicle well. Check it before starting.
To avoid serious injury or death:
A Be sure to check and service the vehicle on a
level surface with the engine shut off and the
parking brake "ON" and implement lowered to
the ground if equipped.
Check item
- Walk around inspection
- Check engine oil level
- Check transmission fluid level
- Check brake fluid level
- Check hydraulic tank oil level
- Clean hydraulic oil cooler net
- Check coolant level
- Clean grill, radiator screen
(When used in a dusty place)
- Clean area near engine manifold
- Check brake pedal
- Check parking brake
- Check indicators, gauges and meters
- Check lights
- Check seat belt and ROPS
- Check front and rear joint boots
- Check tire inflation pressure
- Check backup beeper (if equipped)
- Refuel
(See "DAILY CHECK" in "PERIODIC SERVICE" section.)
- Care of danger, warning and caution labels
(See "DANGER, WARNING AND CAUTION LABELS" in
"SAFE OPERATION" section.)
9PRE-OPERATION CHECK
10 OPERATING THE ENGINE
OPERATING THE ENGINE
STARTING THE ENGINE
To avoid serious injury or death:
A Read and understand "Safe Operation" in front
of this manual.
A Read and understand the danger, warning and
caution labels located on the vehicle.
A To avoid the danger of exhaust fume
poisoning, do not operate the engine in a
closed building without proper ventilation.
A Never start engine while standing on ground.
Start engine only from operator's seat.
A Always set range gear shift lever to the
"NEUTRAL" position and to place the Hydraulic
Outlet lever (if equipped) in "OFF" position and
to place the hydraulic lift cylinder lever to the
"NEUTRAL" position before starting the
engine.
A Make sure the engine hand throttle (if
equipped) is in its idle engine speed position.
A Do not use starting fluid or ether.
A To protect the battery and the starter, make sure that
the starter is not continuously turned for more than 10
seconds.
1. Make sure the parking brake is set.
(1) Parking brake lever
(2) Release button
(A) Pull to "PARK"
2. Set the range gear shift lever to the
"NEUTRAL" position.
(1) Range gear shift lever (L) LOW Range
(H) HIGH Range
(N) "NEUTRAL"
(R) "REVERSE"
Loading...