Kramer Electronics, Ltd.
Preliminary
USER MANUAL
Model:
VS-169TP
16x9 CAT 5 Matrix Switcher
Contents
i
Contents
1 Introduction 1
2 Getting Started 1
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 2
2.3 Recycling Kramer Products 2
2.4 Quick Start 3
3 Overview 4
3.1 Shielded Twisted Pair (STP) / Unshielded Twisted Pair (UTP) 5
4 Your VS-169TP 16x9 CAT 5 Matrix Switcher 5
4.1 Using the IR Transmitter 10
5 Installing the VS-169TP in a Rack 11
5.1 Wiring the CAT 5 LINE IN / LINE OUT RJ-45 Connectors 12
6 Connecting the VS-169TP 16x9 CAT 5 Matrix Switcher 12
6.1 Connecting the RS-232 Ports 15
6.1.1 Connect the Local RS-232 Ports 15
6.1.2 Connect the Control RS-232 Ports 15
6.2 Setting the DIP-switches 15
6.2.1 Setting the Machine # 16
7 Control the VS-169TP 16x9 CAT 5 Matrix Switcher 17
7.1 Controlling via the RS-232 Interface 17
7.2 Controlling via the RS-485 Interface 18
7.3 Controlling via the ETHERNET 19
7.3.1 Connecting the ETHERNET Port directly to a PC (Crossover Cable) 19
7.3.2 Connecting the ETHERNET Port via a Network Hub (Straight-Through Cable) 20
7.3.3 Control Configuration via the Ethernet Port 20
8 Understanding the VS-169TP 16x9 CAT 5 Matrix Switcher 21
8.1 Transmitting the RS-232 Signal 21
9 Operating the VS-169TP 16x9 CAT 5 Matrix Switcher 23
9.1 Switching Inputs #1 and #2 between local and remote 23
9.2 The STATUS 7-Segment Display 24
9.3 Switching an Input to an Output 24
9.3.1 Switching one Input to all Outputs 24
9.3.2 Clearing an Output 25
9.3.3 Clearing all the Outputs 25
9.4 Confirming Settings 26
9.4.1 Toggling between the At Once and Confirm Modes 26
9.4.2 Confirming a Switching Action 26
9.5 Storing/Recalling Input/Output Configurations 27
Contents
ii
9.5.1 Storing an Input/Output Configuration 27
9.5.2 Recalling an Input/Output Configuration 27
9.6 Locking the Front Panel 28
9.7 Choosing the Follow or Breakaway Operation Mode 28
9.7.1 Follow Mode Operation 28
9.7.2 Breakaway Mode Operation 29
10 Flash Memory Upgrade 31
10.1 Switcher Firmware Upgrade 31
10.2 Ethernet Firmware Upgrade 31
10.2.1 Downloading from the Internet 31
10.2.2 Connecting the PC to the RS-232 Port 31
10.2.3 Upgrading Firmware 32
11 Technical Specifications 33
12 Hex Table 33
13 Kramer Protocol 2000 35
Figures
Figure 1: VS-169TP 16x9 CAT 5 Matrix Switcher Front Panel 6
Figure 2: VS-169TP 16x9 CAT 5 Matrix Switcher Rear Panel 8
Figure 3: CAT 5 PINOUT
Figure 4: Connecting the VS-169TP 16x9 CAT 5 Matrix Switcher
Figure 5: DIP-switch Settings
Figure 6: Controlling the VS-169TP via the RS-232 Interface 17
Figure 7: Controlling the VS-169TP via the RS-485 Interface
Figure 8: Local Area Connection Properties Window
Figure 9: Internet Protocol (TCP/IP) Properties Window
Figure 10: Switching an Input to an Output
Figure 11: Switching an Input to Several Outputs 22
Figure 12: MATRIX STATUS Display in the Follow Mode
Figure 13: 7-segment Display During Normal Operation
Figure 14: 7-segment Display Following Power ON
Figure 15: Operating in the RS-232 (Rx) Breakaway Mode 30
Figure 16: MATRIX STATUS Display in the RS-232 (Rx) Breakaway Mode
Figure 17: The KFR-Programmer Window
Tables
Table 1: VS-169TP 16x9 CAT 5 Matrix Switcher Front Panel Functions 7
Table 2: VS-169TP 16x9 CAT 5 Matrix Switcher Rear Panel Functions 9
Table 3: CAT 5 PINOUT
Table 4: DIP-switch Settings 15
Table 5: Machine # DIP-switch Settings
Table 6: VS-169TP Technical Specifications 33
Table 7: VS-169TP Hex Table
12
14
15
18
19
20
22
23
24
24
30
32
12
16
34
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Contents
iii
Table 8: Protocol Definitions 35
Table 9: Instruction Codes for Protocol 2000
36
Introduction
1
i
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range
of problems that confront the video, audio, presentation, and broadcasting
professional on a daily basis. In recent years, we have redesigned and upgraded
most of our line, making the best even better! Our 1,000-plus different models
now appear in 11 groups
1
that are clearly defined by function.
Thank you for purchasing the Kramer VS-169TP 16x9 CAT 5 Matrix Switcher.
This unique matrix switcher, which utilizes cheap twisted pair cabling often preinstalled in buildings these days, routes and distributes signals both from a local
source and at extended ranges (via twisted pair). It is designed especially for
installations where a high level of control possibilities from extended distances is
required. Typical uses include presentation and multimedia applications, as well
as long-range graphics distribution and control for schools, hospitals, security,
and stores.
The package includes the following:
• The VS-169TP 16x9 CAT 5 Matrix Switcher
• Kramer RC-IR2 Infrared Remote Control Transmitter (including the
required battery and a separate user manual
3
)
• Windows®-based Kramer control software
• Power cord
2
, rack “ears”, and this user manual
3
2 Getting Started
We recommend that you:
• Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
• Review the contents of this user manual
Go to http://www.kramerelectronics.com to check for up-to-date user
manuals, application programs, and to check if firmware upgrades are
available (where appropriate).
1 GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers; GROUP 3: Control Systems;
GROUP 4: Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products;
GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity;
GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra Products
2 We recommend that you use only the power cord supplied with this device
3 Download up-to-date Kramer user manuals from our Web site at http://www.kramerelectronics.com
Loading...