Korg MS2000B, MS2000BR User Manual

Sicherungsstift

MS2000B / MS2000BR Owner's Manual Addendum

Thank you for purchasing the MS2000B/BR Analog Modeling Synthesizer. To ensure trouble-free enjoyment, please read this manual carefully and use the product as directed.

The MS2000B provides an XLR microphone jack on the front panel. Also included is a matching gooseneck microphone that can plug directly into this jack, providing immediate access to the Vocoder functions (see “MICROPHONE CONNECTIONS”). In addition, the MS2000B and MS2000BR contain many new internal programs compared to the original MS2000/R (see “VOICE NAME LIST“).

The specifications and functions remain the same as for the MS2000 / MS2000R. Please read and refer to the MS2000 / MS2000R Owner's Manual.

MICROPHONE CONNECTIONS (MS2000B ONLY)

Do not use the AUDIO IN 2 jack when using the microphone provided. Use only the microphone included with the MS2000B when using the front panel mic input jack. Set the AUDIO IN [2/VOICE] knob to zero when you are not using the AUDIO IN 2 jack or the mic input jack. Do not apply pressure to the neck of the microphone, and do not bend it more than necessary. These actions may cause damage

to the microphone, etc.

INSTALLING THE MICROPHONE

Please refer to “Using the vocoder function” (page 17 of the MS2000/MS2000R Owner's Manual). When connecting the MS2000B microphone, make sure the microphone and the mic input jack are facing the same way (the screw on the base of the microphone should face the rear of the MS2000B)

Hold the microphone by the base when connecting and disconnecting.

DISCONNECTING THE MICROPHONE

Push down on the latch lever of the mic jack and, while holding the microphone by its base, pull the mic straight up and out of the mic jack.

Be sure to depress the latch lever on the mic jack when removing the microphone.

Mic base

Latch lever

MS2000B / MS2000BR Zusatzanleitung

Vielen Dank für den Kauf des MS2000B/BR Analog Modeling Synthesizers. Um ein lange und problemlose Nutzung sicherzustellen, sollten Sie diese Anleitung sorgfältig lesen und das Instrument entsprechend bedienen.

Der MS2000B besitzt eine XLR Mikrofon-Buchse auf dem Frontpanel und ein, im Lieferumfang enthaltenes, passendes Schwanenhals-Mikrofon, welches Ihnen die Benutzung der Vocoder-Funktionen sofort ermöglicht. (siehe „ANSCHLUSS DES MIKROFONS“). Außerdem wurden viele der Werkssounds für den MS2000B/BR komplett neu programmiert (siehe „VOICE NAME LIST“).

Die technischen Daten und Funktion sind ansonsten identisch mit denen des MS2000/R. Zur Bedienung studieren Sie bitte daher die bisherige MS2000/MS2000R Anleitung.

ANSCHLUSS DES MIKROFONS (nur MS2000B)

Zum Anschluss des beiliegenden Mikrofons bitte ausschließlich die dafür vorgesehene frontseitige Mikrofonbuchse verwenden, nicht die AUDIO IN 2 Klinkenbuchse.

Falls Sie weder den Mikrofoneingang noch die AUDIO IN 2 Buchse verwenden, drehen Sie den AUDIO IN [2/VOICE] Regler zurück auf „0“.

Üben Sie keinen Druck auf den Schwanenhals des Mikrofons aus und biegen Sie ihn nur soviel wie notwendig, da sonst das Mikrofon beschädigt werden könnte.

Achten Sie beim Anschluss des Mikrofons darauf, dass der integrierte XLR Stecker korrekt in die Buchse gesteckt wird (Die Schraube am unteren Ende des Mikrofons muss nach hinten weisen). Zur Bedienung der Vocoder-Funktion lesen Sie bitte die Seite 17 der MS2000/MS2000R Bedienungsanleitung.

Um Beschädigungen vorzubeugen, halten Sie das Mikrofon während des Anschließens und Abnehmens am unteren Ende fest.

ABNEHMEN DES MIKROFONS

Drücken Sie den Sicherungsstift der XLR-Buchse nach unten und ziehen sie währenddessen das Mikrofon nach oben heraus. Halten Sie dabei das Mikrofon am unteren Ende.

Griff

S U

MS2000B/MS2000BR Mode d’emploi

Tout d’abord nous tenons à vous remercier de votre achat du synthétiseur à modélisation analogique MS2000B/BR. Afin de profiter pleinement de votre achat, veuillez lire attentivement ce manuel, et utiliser votre appareil dans des conditions correctes.

Le MS2000B possède une entrée microphone sur la face avant, et un microphone est inclus pour la fonction Vocodeur. (Voir “COMMENT INSTALLER L’ACCESSOIRE MICROPHONE FOURNI”). Quelques programmes internes ont été modifiés par rapport au MS2000 (voir “VOICE NAME LIST“).

Les caractéristiques et fonctions sont les mêmes que les MS2000/MS2000R. Veuillez S ‘il vous plait lire et vous référer au mode d’emploi de ces modèles.

COMMENT INSTALLER L’ACCESSOIRE MICROPHONE FOURNI (SEULEMENT MS2000B)

S’il vous plait, ne pas utiliser l’entrée AUDIO IN2 quand vous utilisez le microphone fourni. Vérifiez que vous utilisez le microphone fourni uniquement avec l’entrée Micro.

Réglez le bouton AUDIO IN [2/VOICE] sur zéro quand vous n’utilisez pas l’entrée AUDIO IN 2 et l’entrée Micro. Ne pas trop manipuler le corps du micro et ne pas le tirer plus que nécessaire, cela pourrait provoquer des déconnections ou des

troubles.

INSTALLATION DU MICROPHONE.

S’il vous plait veuillez vous référer au chapitre “Utilisation de la fonction vocoder“ (page 17 du mode d’emploi des MS2000 et MS2000R). Quand vous connectez le Microphone fourni, veillez à ce que la connectique du Micro et la prise d’entrée coïncident (une vis sur la tige du Micro est située sur la face arrière).

Veuillez maintenir la tige du Microphone fourni quand vous l’installez ou vous le démontez.

Griff

DEMONTAGE DU MICROPHONE

Poussez le petit levier et en même temps tirer le Microphone tout en maintenant la prise en face avant.

petit levier

S U

2003 KORG INC. 1504 DTH



Printed in Japan

Voice Name List

No. Name Category Mode SEQ 1 SEQ 2 SEQ 3 ARPEGGIATOR

A01 UnisonRingLD Synth-Lead Single Cutoff Panpot Off A02 Flashin'Pad Seq/Motion Single LFO2 Frequency Cutoff EG1 Intensity Panpot Off

A03 X-ModBass Synth-Bass Dual

A04 IDM Pad Strings/Pad Single LFO2 Frequency Cutoff Resonance Off A05 HyperForce Synth-Hard Single Pitch Cutoff Off A06 Pan Tran Synth-Soft Single Panpot Off A07 Razor Blade Seq/Motion Single Osc2 Semitone Cutoff Level Random A08 DetuneBass Synth-Bass Single Pitch Cutoff Panpot Off

A09 High Voltage Synth-Lead Dual

A10 AnalogBell Percussive/Bell Single Patch 3 Intensity EG2 Release Time Patch 4 Intensity Alt1 A11 FonkaDeli Keyboards Single Cutoff EG2 Release Time Osc1 Control2 Off

A12 AutoTrance Seq/Motion Dual

A13 4OSC"m7" Synth-Hard Dual

A14 Digy Bass Synth-Bass Single Pitch Cutoff Off A15 Domin8or S.E/Drum Single Patch 1 Intensity Off A16 FilterString Strings/Pad Single Cutoff Osc2 Tune Off B01 70'sFunkLead Synth-Lead Single Cutoff Pitch Panpot Off B02 SawSaw Seq/Motion Single Osc2 Semitone Resonance Cutoff EG1 Intensity Off B03 House Bass Synth-Bass Single EG1 Attack Time EG2 Release Time Cutoff EG1 Intensity Off

B04 Stairs Pad Strings/Pad Dual

B05 Poly Line Synth-Hard Single Cutoff Resonance Off B06 Ice Field Synth-Soft Single EG2 Attack Time Noise Level Off B07 Fairies Seq/Motion Single Osc1 Control2 Cutoff Level Alt1 B08 Line Bass Synth-Bass Single Pitch Level Patch 2 Intensity Off B09 ModLead Synth-Lead Single Osc2 Semitone Panpot Cutoff Off

B10 RingPerc Percussive/Bell Dual

B11 Reed Piano Keyboards Single Patch 1 Intensity Off

B12 Filter Muzik Seq/Motion Dual

B13 RingChord Synth-Hard Single Osc1 Control2 Panpot Cutoff Off B14 Warp Bass Synth-Bass Single Resonance Osc2 Level EG1 Attack Time Off B15 KillaBeez S.E/Drum Single Noise Level Resonance Cutoff Off B16 Evolution Strings/Pad Single LFO1 Frequency Patch 4 Intensity EG2 Release Time Off C01 TriangleLead Synth-Lead Single Pitch Panpot Cutoff Off C02 GatedSyncBas Synth-Bass Single Osc2 Semitone Panpot Off C03 Bass Machine Synth-Bass Single Pitch Panpot Cutoff Off

C04 Snowdance Strings/Pad Dual

C05 Stab Saw Synth-Hard Single Osc2 Tune Pitch Panpot Off C06 Wheeler Pad Strings/Pad Single Cutoff Resonance Level Off C07 SynthHarp Seq/Motion Single Cutoff Patch 1 Intensity Panpot Up C08 AcidRingBass Synth-Bass Single Pitch Cutoff Panpot Off C09 Dirty Sync Synth-Lead Single Osc2 Semitone Panpot Pitch Off C10 ElektricArpe Percussive/Bell Single EG2 Decay Time EG2 Release Time Osc1 Control1 Random C11 RockOrgan Keyboards Single Panpot Cutoff Off

C12 Ready 2 Air Seq/Motion Dual

C13 Sweep"min" Synth-Hard Single Pitch Level Cutoff Off C14 TechRingBass Synth-Bass Single Patch 2 Intensity LFO2 Frequency Pitch Off C15 Echo Park S.E/Drum Single Level Pitch Off C16 PWM Strings Strings/Pad Single Resonance Cutoff Cutoff EG1 Intensity Off

D01 Uni Synth Synth-Lead Dual

D02 Electrick Seq/Motion Single Cutoff EG1 Intensity Level Panpot Trigger D03 Zap Bass Synth-Bass Single Pitch Panpot Osc1 Control1 Off D04 Reactor Pad Strings/Pad Single Step Length Panpot Off D05 TheMehT Synth-Hard Single Osc2 Semitone Cutoff Osc1 Control2 Off D06 Astral Vox Synth-Soft Single Osc1 Control2 Cutoff EG1 Intensity Level Off

D07 Water Edge Seq/Motion Dual

D08 Phunk Bass Synth-Bass Single Pitch Panpot Cutoff Off D09 Ana Fuzz Synth-Lead Single Cutoff EG1 Intensity Cutoff Level Off D10 Deep Bell Percussive/Bell Single Patch 1 Intensity Off D11 PhaserClav Keyboards Single Level Panpot Cutoff Off

D12 Trip Planet Seq/Motion Dual

D13 Glass Synth-Hard Single Pitch Off D14 ReverseBass Synth-Bass Single Pitch Panpot Cutoff Off

D15 Diginator S.E/Drum Dual

D16 Ana Strings Strings/Pad Single Resonance Cutoff Patch 3 Intensity Off

T1 Pitch Cutoff Panpot T2 Cutoff Pitch Panpot

T1 Osc2 Semitone Cutoff T2 Osc2 Semitone Cutoff

T1 Pitch Cutoff EG1 Intensity Level T2 Osc2 Semitone Pitch T1 Pitch EG2 Sustain Level Cutoff T2 Pitch EG2 Sustain Level Cutoff

T1 Panpot Cutoff EG1 Intensity Step Length T2

T1 Osc1 Control2 Cutoff T2 Resonance

T1 Pitch Osc2 Semitone T2 Noise Level Cutoff Pitch

T1 Osc1 Control2 Level Cutoff T2 Cutoff EG2 Attack Time Level

T1 Cutoff Resonance Noise Level T2 Pitch Level Osc1 Control2

T1 Step Length Panpot Osc2 Semitone T2 Step Length Panpot Osc2 Semitone

T1 Noise Level T2 Pitch Osc2 Level

T1 Level Osc1 Level Osc2 Semitone T2 EG2 Decay Time Level Pitch

T1 Panpot T2 Pitch Level

Off

Trigger

Off

Alt1

Off

Random

Off

Alt2

Off

No. Name Category Mode SEQ 1 SEQ 2 SEQ 3 ARPEGGIATOR

E01 Rez Lead Synth-Lead Single Osc2 Level EG1 Attack Time Off E02 DWGS WaveSeq Seq/Motion Single Osc1 Control2 Panpot Off E03 AcidSawBass Synth-Bass Single Cutoff EG1 Intensity Level Panpot Off

E04 TickerPad Strings/Pad Dual

E05 Slippy Pad Synth-Hard Single Pitch Cutoff Panpot Off E06 Synth Brass Synth-Soft Single Osc2 Semitone Panpot Cutoff Off E07 S&H Signal Seq/Motion Single Panpot LFO2 Frequency Pitch Up E08 Magnum Bass Synth-Bass Single Pitch Patch 3 Intensity Cutoff Off E09 Freq Lead Synth-Lead Single Patch 1 Intensity Off E10 BleepsPerc Percussive/Bell Single Noise Level Cutoff Pitch Random E11 Brett Ped Keyboards Single Osc1 Control2 Cutoff EG2 Sustain Level Off

E12 Auto Disco Seq/Motion Dual

E13 NoisyHit Synth-Hard Dual

E14 RingSyncBass Synth-Bass Single Pitch Cutoff Panpot Off E15 Stutter S.E/Drum Single Patch 4 Intensity LFO2 Frequency Patch 2 Intensity Off E16 StringMachin Strings/Pad Single Cutoff EG2 Release Time Patch 1 Intensity Off

F01 Far Horizon Synth-Lead Dual

F02 Burnin'Rave Seq/Motion Dual

F03 Sub Bass Synth-Bass Single Pitch Cutoff Osc1 Control1 Off F04 Stream Pad Strings/Pad Single Step Length Level EG2 Attack Time Off F05 Square Comp Synth-Hard Single Cutoff EG1 Intensity EG1 Attack Time Cutoff Off F06 Organ Bass Synth-Bass Single Pitch Cutoff Panpot Off

F07 Tap Lead Seq/Motion Dual

F08 Banana Bass Synth-Bass Dual

F09 UnisonSqurLd Synth-Lead Single Pitch Panpot Cutoff Off F10 Bound Ball Percussive/Bell Single Osc1 Control1 Panpot Patch 2 Intensity Off F11 Lounge Organ Keyboards Single Panpot Cutoff Off

F12 Zoop Mania Seq/Motion Dual

F13 "M3rd"Chord Synth-Hard Dual

F14 Jami Bass Synth-Bass Single Osc2 Level Cutoff Resonance Off F15 Bad Dream S.E/Drum Single LFO1 Frequency Cutoff Panpot Off F16 Need4Speed Seq/Motion Single Pitch Cutoff EG1 Intensity Trigger G01 Turn Wheel Synth-Lead Single Osc2 Level Osc1 Control1 LFO1 Frequency Off G02 Trip 2 Ibiza Seq/Motion Single Cutoff Off G03 80's Bass Synth-Bass Single Pitch Cutoff Noise Level Off G04 Motion Pad Strings/Pad Single Patch 1 Intensity Patch 2 Intensity Off G05 Golden Synth Synth-Hard Single Osc2 Tune Off G06 NuSkoolDrop Synth-Bass Single Patch 1 Intensity Osc1 Control1 Off G07 Synth Lana Seq/Motion Single Panpot Pitch Step Length Up G08 MG Bass Synth-Bass Single Pitch Cutoff Panpot Off

G09 Bass&5thLead Split Prog Split

G10 ElectroShock Percussive/Bell Dual

G11 Pulse Comp Keyboards Single Panpot Level Osc2 Level Off

G12 Snow&Ice Split Prog Split

G13 Century Stab Synth-Hard Single Patch 1 Intensity Cutoff EG1 Intensity EG1 Decay Time Off G14 Drive Bass Synth-Bass Single Resonance EG2 Release Time Off G15 DooM S.E/Drum Single Pitch Cutoff Osc2 Semitone Off

G16 stROBOsCOPe Split Prog Split

H01 CleanVocoder Vocoder Prog Vocoder Off H02 WispaVocoder Vocoder Prog Vocoder Off H03 DarkVocoder Vocoder Prog Vocoder Off H04 Vocoder Ens Vocoder Prog Vocoder Off H05 Vocoder Cho Vocoder Prog Vocoder Off H06 Vocoder 5th Vocoder Prog Vocoder Off H07 Bass Vocoder Vocoder Prog Vocoder Off H08 VoiceChanger Vocoder Prog Vocoder Off H09 VocoderPulse Vocoder Prog Vocoder Off H10 Vocoder Squ Vocoder Prog Vocoder Off H11 Vocoder Wah Vocoder Prog Vocoder Off H12 Vocoder Vox Vocoder Prog Vocoder Off H13 Vocoder DWGS Vocoder Prog Vocoder Off H14 Vocodevil Vocoder Prog Vocoder Off H15 AudioIn INIT AudioIn Single Trigger H16 INIT Program Init Prog Single Off

T1 EG1 Decay Time EG2 Sustain Level Osc1 Control2 T2 Osc1 Control2 Cutoff

T1 Pitch T2 Cutoff Noise Level T1 EG1 Decay Time T2 Cutoff Resonance EG1 Decay Time

T1 Osc2 Level Osc2 Tune Cutoff T2 Osc2 Level Osc2 Tune Cutoff T1 Cutoff T2 Panpot

T1 Cutoff Osc2 Semitone T2 Pitch Cutoff T1 Pitch Cutoff Panpot T2 Pitch Cutoff Panpot

T1 Patch 4 Intensity EG2 Decay Time Pitch T2 Osc2 Level Osc1 Control1 Level T1 T2 Osc2 Semitone

T1 Pitch Patch 3 Intensity Cutoff T2 Panpot Cutoff Step Length T1 Pitch Cutoff T2 Cutoff

T1 Osc1 Control2 Osc1 Control1 T2 Osc2 Semitone

T1 Pitch Cutoff Cutoff EG1 Intensity T2 Osc2 Semitone Cutoff Panpot

Alt1

Off

Trigger

Off

Down

Off

Alt1