Kontron CP-RIO6-923-F User Manual
www.kontron.com
If it's embedded, it's Kontron.
» Kontron User's Guide «
CP-RIO6-923-F
Document Revision 1.1
Document ID: CP-RIO6-923-F
Issue Date: April 2011
www.kontron.com
Revision History
Rev. Index Brief Description of Changes Date of Issue
0.5 Initial Issue 29.09.2009
1.0 Frontplate drawing updated 01.10.2009
1.1
Minor changes in chapter 1. Section „M12 100BASE-TX Ports“ added in
chapter 3 and other minor changes.
27.04.2011
Customer Service
Contact Information: Kontron Canada, Inc.
4555 Ambroise-Lafortune
Boisbriand, Québec, Canada
J7H 0A4
Tel: (450) 437-5682
(800) 354-4223
Fax: (450) 437-8053
E-mail: support@ca.kontron.com
Visit our site at:www.kontron.com
© 2011 Kontron, an International Corporation. All rights reserved.
The information in this user's guide is provided for reference only. Kontron does not assume any liability
arising out of the application or use of the information or products described herein. This user's guide may
contain or reference information and products protected by copyrights or patents and does not convey any
license under the patent rights of Kontron, nor the rights of others.
Kontron is a registered trademark of Kontron. All trademarks, registered trademarks, and trade names used
in this user's guide are the property of their respective owners. All rights reserved. Printed in Canada. This
user's guide contains information proprietary to Kontron. Customers may reprint and use this user's guide
in other publications. Customers may alter this user's guide and publish it only after they remove the Kontron name, cover, and logo.
Kontron Modular Computer GmbH
Sudetenstrasse 7
87600 Kaufbeuren
Germany
+49 (0) 8341 803 333
+49 (0) 8341 803 339
support-kom@kontron.com
Kontron reserves the right to make changes without notice in product or component design as warranted by
evolution in user needs or progress in engineering or manufacturing technology. Changes that affect the
operation of the unit will be documented in the next revision of this user's guide.
ii CP-RIO6-923-F User Guide
www.kontron.com
Table of Contents
Revision History .................................................................................................................. ii
Customer Service ................................................................................................................ ii
Proprietary Note .................................................................................................................vi
Trademarks ......................................................................................................................vi
Environmental Protection Statement .......................................................................................vi
Before you Begin ...............................................................................................................vii
When Working Inside a Computer .......................................................................................... viii
Advisory Conventions ...........................................................................................................ix
Safety Instructions .............................................................................................................. x
Special Handling and Unpacking Instructions ............................................................................xi
General Instructions on Usage ..............................................................................................xii
Regulatory Compliance Statements ....................................................................................... xiii
Two Year Warranty ............................................................................................................. xiv
1 Introduction ...................................................................................................2
1.1 Product Overview .........................................................................................2
1.2 Technical Specification ................................................................................. 3
2 Installation ....................................................................................................5
2.1 Safety Requirements ....................................................................................5
2.2 Installation Procedure ..................................................................................6
2.3 Removal Procedure ......................................................................................7
3 Hardware Description .......................................................................................9
3.1 RJ45 1000BASE-T Ports .................................................................................9
3.2 M12 100BASE-TX Ports ................................................................................ 10
3.3 CompactPCI Bus Connectors ......................................................................... 11
3.4 Air Baffle ................................................................................................. 15
3.5 Front Panel Elements .................................................................................. 15
A Getting Help ................................................................................................. A-2
A.1 Returning Defective Merchandise............................................................................. A-2
A.2 When Returning a Unit.......................................................................................... A-3
iii CP-RIO6-923 User Guide
www.kontron.com
List of Tables
Table 1-1 CP-RIO6-923-F Main Specifications ................................................................ 3
Table 3-1 Ethernet Port Mapping ............................................................................... 9
Table 3-2 RJ45 Pin Assignment ................................................................................ 10
Table 3-3 Ethernet Port Mapping .............................................................................. 10
Table 3-4 M12 D-coded female Connector Pin Assignment ............................................... 11
Table 3-5 J3 Connector Pin Assignment ...................................................................... 12
Table 3-6 J4 Connector Pin Assignment ...................................................................... 13
Table 3-7 J5 Connector Pin Assignment ...................................................................... 14
iv CP-RIO6-923-F User Guide
www.kontron.com
List of Figures
Figure 3-1: CP-RIO6-923-F Front Panel ........................................................................ 15
Figure 3-2: CP-RIO6-923-F12 Front Panel ..................................................................... 15
Figure 3-3: CP-RIO6-923-F-8M12 Front Panel ................................................................ 15
v CP-RIO6-923-F User Guide
Preface
www.kontron.com
Proprietary Note
This document contains information proprietary to Kontron AG. It may not be copied or transmitted by any
means, disclosed to others, or stored in any retrieval system or media without the prior written consent of
Kontron AG or one of its authorized agents.
The information contained in this document is, to the best of our knowledge, entirely correct. However, Kontron AG cannot accept liability for any inaccuracies or the consequences thereof, or for any liability arising
from the use or application of any circuit, product, or example shown in this document.
Kontron AG reserves the right to change, modify, or improve this document or the product described herein,
as seen fit by Kontron AG without further notice.
Trademarks
Kontron AG and the Kontron logo are trade marks owned by Kontron AG, Germany. In addition, this document
may include names, company logos and trademarks, which are registered trademarks and, therefore, proprietary to their respective owners.
Environmental Protection Statement
This product has been manufactured to satisfy environmental protection requirements where possible. Many
of the components used (structural parts, printed circuit boards, connectors, batteries, etc.) are capable of
being recycled.
Final disposition of this product after its service life must be accomplished in accordance with applicable
country, state, or local laws or regulations.
vi CP-RIO6-923-F User Guide
Preface
www.kontron.com
Before you Begin
Before handling the board, read the instructions and safety guidelines on the following pages to prevent
damage to the product and to ensure your own personal safety. Refer to the "Advisory Conventions" section
for advisory conventions used in this user's guide, including the distinction between Warnings, Cautions and
Notes.
• Always use caution when handling/operating the computer. Only qualified, experienced, authorized
electronics service personnel should access the interior of the computer. The power supplies produce
high voltages and energy hazards, which can cause bodily harm.
• Use extreme caution when installing or removing components. Refer to the installation instructions in
this user's guide for precautions and procedures. If you have any questions, please contact Kontron
Technical Support
WARNING
High voltages are present inside the chassis when the unit’s power
cord is plugged into an electrical outlet. Turn off system power, turn
off the power supply, and then disconnect the power cord from its
source before removing the chassis cover. Turning off the system
power switch does not remove power to components.
vii CP-RIO6-923-F User Guide
Preface
www.kontron.com
When Working Inside a Computer
Before taking covers off a computer, perform the following steps:
• Turn off the computer and any peripherals.
• Disconnect the computer and peripherals from power sources or subsystems to prevent electric shock
or system board damage. This does not apply to when hot-swapping parts.
• Disconnect telephone or telecommunications lines from the computer.
In addition, take note of these safety guidelines when appropriate:
• To help avoid possible damage to system boards, wait five seconds after turning off the computer before removing a component, removing a system board, or disconnecting a peripheral device from the
computer.
When you disconnect a cable, pull on its connector or on its strain-relief loop, not on the cable itself. Some
cables have a connector with locking tabs. If you are disconnecting this type of cable, press in on the locking
tabs before disconnecting the cable. As you pull connectors apart, keep them evenly aligned to avoid bending any connector pins. Also, before connecting a cable, make sure both connectors are correctly oriented
and aligned.
CAUTION
Do not attempt to service the system yourself, except as explained in
this user’s guide. Follow installation and troubleshooting instructions closely.
viii CP-RIO6-923-F User Guide
www.kontron.com
Advisory Conventions
CAUTION
This symbol and title indicate potential damage to hardware and tells
you how to avoid the problem.
CAUTION
Electric Shock
This symbol and title warn of hazards due to electrical shocks (> 60V)
when touching products or parts of them. Failure to observe the precautions indicated and/or prescribed by the law may endanger your
life/health and/or result in damage to your material.
WARNING
Preface
This symbol and title emphasize points which, if not fully understood
and taken into consideration by the reader, may endanger your
health and/or result in damage to your material.
ESD Sensitive Device
This symbol and title inform that electronic boards and their components are sensitive to static electricity. Therefore, care must be taken during all handling operations and inspections of this product, in order to ensure product integrity at all
times.
Please read also the section “Special Handling and Unpacking Instructions”.
Note...
This symbol and title emphasize aspects the reader should read through carefully
for his or her own advantage.
CE Conformity
This symbol indicates that the product described in this manual is in compliance
with all applied CE standards. Please refer also to the section „Regulatory cpmpliance Statements“ in this manual.
ix CP-RIO6-923-F User Guide
Preface
www.kontron.com
Safety Instructions
Your new Kontron product was developed and tested carefully to provide all features necessary to ensure its
compliance with electrical safety requirements. It was also designed for a long fault-free life. However, the
life expectancy of your product can be drastically reduced by improper treatment during unpacking and
installation. Therefore, in the interest of your own safety and of the correct operation of your new Kontron
product, you are requested to conform with the following guidelines.
WARNING
All operations on this device must be carried out by sufficiently
skilled personnel only.
WARNING
Do not connect a switch port to a telephone line.
WARNING
For installation in a Hot-Plug system, observe the safety instructions
specific to the system. Read the relevant documentation.
CAUTION
Electric Shock
High voltages are present inside the chassis when the unit’s power
cord is plugged into an electrical outlet. Turn off system power, turn
off the power supply, and then disconnect the power cord from its
source before removing the chassis cover. Turning off the system
power switch does not remove power to components.
x CP-RIO6-923-F User Guide
Loading...