Kontron CP3-BP8-M User Manual

CPCI

Backplane

Manual

PRODUCT DOCUMENTATION

PD04

CP3-BP8-M

Reference ID: 24229 PD04

Revision: 01

Issued: March 01, 2002

The product described in this manual
is in compliance with all applied CE
standards.

PD04: CP3-BP8-M CPCI Backplane

Revision History

CPCI Backplane Manual:

Manual/Product Title:

Reference ID: 24229 PD04

Product Documentation:
CP3-BP8-M

Rev.

Index

01 Initial Issue Mar. 01, 2002

Brief Description of Changes Date of Issue

Imprint

Copyright © 2002 PEP Modular Computers GmbH. All rights
reserved. This manual may not be copied, photocopied,
reproduced, translated or converted to any electronic or machine­readable form in whole or in part without prior written approval of
PEP Modular Computers GmbH.

DISCLAIMER:

PEP Modular Computers GmbH rejects any liability for the correctness
and completeness of this manual as well as its suitability for any partic­ular purpose.

This manual was realized by: TPD/Engineering, PEP Modular Computers GmbH.

Page 2 © 2002 PEP Modular Computers GmbH RID 24229 PD04, Rev. 01

CPCI Backplane PD04: CP3-BP8-M

1. Introduction

The specific product description provided with this product documentation is part of the PEP’s
CPCI Backplane manual. For further information, in particular regarding general details as well
as safety and warranty statements, refer to the CPCI Backplane Manual, ID 24229.

2. CP3-BP8-M DIN Type M Backplane

The main features of the 3U, 8-slot, DIN type M powered backplane CP3-BP8-M are
described in the following table:

Table 1: Distinctive Features of Backplane CP3-BP8-M

Feature Specification

Form Factor

Size

Number of Slots

Bus Resolution
Bus Frequency

Rear I/O Connectivity

Hot-Swap Capability

Power Supply Connector

Redundant Power Supply

Flexible Grounding Option

Fan Connector

MSD Connector

Power LED Connector

PS-ON Connector

Reset Function Connector

3U

197.12*128.7 mm
8
64 bits: slots 1 to 6

32 bits: slots 7 and 8
33MHz: slots 1 to 8
P2 on slots 7 and 8
—
DIN type M
—
Yes
Yes
Yes
Yes
Yes
Yes

RID 24229 PD04, Rev. 01 © 2002 PEP Modular Computers GmbH Page 3