CPCI
Backplane
Manual
PRODUCT DOCUMENTATION
PD15
CP3-BP2-PB-RIO
Reference ID: 24229 PD15
Revision: 01
Issued: August 29, 2003
The product described in this manual
is in compliance with all applied CE
standards.
PD15: CP3-BP2-PB-RIO CPCI Backplane
Revision History
CPCI Backplane Manual:
Manual/Product Title:
Reference ID: 24229 PD15
Product Documentation:
CP3-BP2-PB-RIO
Rev.
Index
01 Initial Issue Aug. 29, 2003
Brief Description of Changes Date of Issue
Imprint
Copyright © 2003 PEP Modular Computers GmbH. All rights
reserved. This manual may not be copied, photocopied,
reproduced, translated or converted to any electronic or machinereadable form in whole or in part without prior written approval of
PEP Modular Computers GmbH.
DISCLAIMER:
PEP Modular Computers GmbH rejects any liability for the correctness
and completeness of this manual as well as its suitability for any particular purpose.
This manual was realized by: TPD/Engineering, PEP Modular Computers GmbH.
Page 2 © 2003 PEP Modular Computers GmbH RID 24229 PD15, Rev. 01
CPCI Backplane PD15: CP3-BP2-PB-RIO
1. CPCI BackplaneIntroduction
The specific product description provided with this product documentation is part of the PEP’s
CPCI Backplane manual. For further information, in particular regarding general details as well
as safety and warranty statements, refer to the CPCI Backplane Manual, ID 24229.
2. CP3-BP2-PB-RIO Power Bar Backplane
The main features of the 3U, 2-slot, power bar backplane CP3-BP2-PB-RIO, which is
designed for rear I/O applications, are described in the following table:
Table 1: Distinctive Features of Backplane CP3-BP2-PB-RIO
Feature Specification
Form Factor
Size
Number of Slots
Bus Resolution
Bus Frequency
Rear I/O Connectivity
Hot-Swap Capability
Power Supply Connector
Redundant Power Supply
Flexible Grounding Option
Fan Connector
MSD Connector
PS-ON Connector
3U
202.2*128.7 mm
2
32 bits: slots 1 and 2
33 or 66 MHz: slots 1 and 2
P2 on slots 1 and 2
Yes
5 power bar terminals, M3 lugs
Supported
Yes
–
–
–
Reset Function Connector
IPMB Extension Connector
System MON-CTRL Connector
RID 24229 PD15, Rev. 01 © 2003 PEP Modular Computers GmbH Page 3
–
–
Yes