Kontron CFC-ADA-1 User Manual

® Kontron User's Guide

® IDE Compact Flash Adapter for all Boards

Document Revision 200

This page intentionally left blank

Table of Contents

Table of Contents

1 User Information........................................................................................................ 4

1.1 About This Document .........................................................................................4

1.2 Copyright Notice ...............................................................................................4

1.3 Trademarks ......................................................................................................4

1.4 Standards ........................................................................................................4

1.5 Warranty .........................................................................................................5

1.6 Technical Support..............................................................................................5

2 Description................................................................................................................ 6

2.1 Features ..........................................................................................................6

2.2 Connector Layout ..............................................................................................7

3 Mechanical Drawing .................................................................................................... 8

4 Ordering Information.................................................................................................. 9

5 History.....................................................................................................................10

Kontron User's Guide
IDE Compact Flash Adapter for all
Boards

iii

1 User Information

1

User Information

1.1

About This Document

This document provides information about products from Kontron Embedded Modules GmbH and/or its
subsidiaries. No warranty of suitability, purpose, or fitness is implied. While every attempt has been
made to ensure that the information in this document is accurate, the information contained within is
supplied “as-is” and is subject to change without notice.

For the circuits, descriptions and tables indicated, Kontron assumes no responsibility as far as patents or
other rights of third parties are concerned.

1.2

Copyright Notice

Copyright © 2003-2007 Kontron Embedded Modules GmbH

All rights reserved. No part of this document may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language or computer language, in any form or by any means
(electronic, mechanical, photocopying, recording, or otherwise), without the express written permission
of Kontron Embedded Modules GmbH.

DIMM-PC®, PISA®, ETX®, ETXexpress®, microETXexpress™, X-board®, DIMM-IO® and DIMM-BUS® are
trademarks or registered trademarks of Kontron Embedded Modules GmbH. Kontron is trademark or
registered trademark of Kontron AG.

1.3

Trademarks

The following lists the trademarks of components used in this board.

®

®
®
®

Standards

1.4

Kontron Embedded Modules GmbH is certified to ISO 9000 standards.

IBM, XT, AT, PS/2 and Personal System/2 are trademarks of International Business
Machines Corp.

Microsoft is a registered trademark of Microsoft Corp.

Intel is a registered trademark of Intel Corp.

All other products and trademarks mentioned in this manual are trademarks of their
respective owners.

Kontron User's Guide
IDE Compact Flash Adapter for all
Boards

4

1 User Information

1.5

Warranty

This Kontron Embedded Modules GmbH product is warranted against defects in material and
workmanship for the warranty period from the date of shipment. During the warranty period, Kontron
Embedded Modules GmbH will at its discretion decide to repair or replace defective products.

Within the warranty period, the repair of products is free of charge as long as warranty conditions are
observed.

The warranty does not apply to defects resulting from improper or inadequate maintenance or handling
by the buyer, unauthorized modification or misuse, operation outside of the product’s environmental
specifications or improper installation or maintenance.

Kontron Embedded Modules GmbH will not be responsible for any defects or damages to other products
not supplied by Kontron Embedded Modules GmbH that are caused by a faulty Kontron Embedded
Modules GmbH product.

Technical Support

1.6

Technicians and engineers from Kontron Embedded Modules GmbH and/or its subsidiaries are available
for technical support. We are committed to making our product easy to use and will help you use our
products in your systems.

Before contacting Kontron Embedded Modules GmbH technical support, please consult our Web site at
http://www.kontron-emea.com/emd for the latest product documentation, utilities, and drivers. If the
information does not help solve the problem, contact us by telephone or email.

Asia Europe North/South America

Kontron Asia Inc. Kontron Embedded Modules GmbH Kontron America

4F, No.415, Ti-Ding Blvd., NeiHu

District,

Taipei 114, Taiwan

Tel: [phone] Tel: [phone] Tel: [phone]

Fax: + 886 2 2799 7399 Fax: [phone] Fax: [phone]

mailto:[e-mail] mailto:[e-mail] mailto:[e-mail]

Brunnwiesenstr. 16

94469 Deggendorf – Germany

14118 Stowe Drive

Poway, CA 92064-7147

Kontron User's Guide
IDE Compact Flash Adapter for all
Boards

5

2 Description

2

Description

Adapter for connecting a Compact Flash Card Type 1 and 2 or a Microdrive, to a 2,5” or 3,5” Harddisk
Interface.

2.1

Features

®
®
®
®

Note: Adapter comes without cables,

two IDE 44 pin 2mm pin headers JP4 and JP2

one IDE 40 pin 2.54mm pin header JP3

one compact flash socket type II JP1

external power connector JP5 if not supplied by 44 pin IDE interface

Kontron User's Guide
IDE Compact Flash Adapter for all
Boards

6

2 Description

2.2 Connector Layout

JP7 Pin Signal Name Function

1 VCC 5V

2 Power LED Cathode of Power LED

3 VCC 5V

4 HDD LED Cathode of HDD activity LED

JP6 Pin Signal Name Function

1 GND

2 Slave shorted to GND -> Master

JP5 Pin Signal Name Function

1 VCC 5V Power supply

2 GND GND Power Supply

3 GND GND Power Supply

4 Not connected

Kontron User's Guide
IDE Compact Flash Adapter for all
Boards

7

3 Mechanical Drawing

3 Mechanical Drawing

Kontron User's Guide
IDE Compact Flash Adapter for all
Boards

8

4 Ordering Information

4 Ordering Information

Article Number Description

96004-0000-00-2 CFC- ADA1 - Adapter for connecting a Compact Flash Card Type 1 and 2 or a
Microdrive, to a 2,5” or 3,5” Harddisk Interface.
96066-0000-00-0 CFC-Eject1 - Ejection arm to mount on CFC-ADA1for front-panel use.

Accessories

96021-0000-00-0 KAB-IDE-2MM - both sides 44 pin 2mm grid header, connecting 2.5" IDE device
to a 2.5" hard disk interface

Kontron User's Guide
IDE Compact Flash Adapter for all
Boards

9

5 History

5 History

Date Document Name Subjects added, changed, deleted Changed by

13-Sep-01 CFCAK113.doc Initial release of short reference K. Wenke
12-Feb-03 CFCAK114.doc Add description and order information M.Ciolacu
19-Oct-04 CFCAK115.doc Add mechanical drawing, add connector description G. Vogl

21.09.07 CFCAK200.doc New corporate design T. Schertel

Kontron User's Guide
IDE Compact Flash Adapter for all
Boards

10