Konica AFR-12 SERVICE BULLETIN KB0000171

Supplemental Technical Informatiaon

Create Date : 2000/11/02

for Parts Modification Notice

Model Area

AFR-12 Firmware

Symptom

AFR-12 IC7 Firmware version upgrade infomation

Description

Because of the version upgrade the firmware becomes compatible with the new model as well as the current model.

Note: The adjustment procedure for the Document Stop Position is changed as follows when the AFR-12 with the upgraded firmware is mounted to CF910.

"Checking and Adjusting the Document Stop Position" of the "Setting-Up Instructions" describes the following.

After the modification Tolerance : 1 to 3mm in the "c" direction from the right edge of

the Original Scale.

Before the modification Tolerance : 1 to 3mm in the "c" direction from the right edge of

the Original Scale (for Metric Area only) 0 to 1mm in the "d" direction from the right edge of the Original Scale (for Inch Area only)

( KDB No.: KB0000171 )

(The tolerance has become equal in Inch-Area and Metric-Area.)

Parts Modification Notice

MO000745