Konica AD-7 SERVICE BULLETIN 004

PARTS MODIFICATION NOTICE

REF NO. : MO010052

DATE : 2001/02/13
MODEL NAME : D1320/1320F D1300/1300F AD-7
MODEL CODE : 1159-215 1160-215 4458-617

PMN NO. : 032 034 004

PAGE NO. :

1/1

DEVELOP

MODEL NAME :

SUBJECT :

KDB NO. :

D1320/1320F, D1300/1300F, AD-7
CORRECTION FOR PARTS MANUAL

- - - - - - - - - -

Please make the following corrections to your Parts Manual.

D1320/1320F PAGE 35
D1300/1300F PAGE 35

3008

AD-7 PAGE 5

3008

The “I” (Interchangeability) column indicates whe ther a modified p art can be in stalled in p r e - mo dification machin e . If a “ Y ” is listed under the “I” column, a part under “AFTER MODI. P/NO. ” column can be installed in pre-modification machine and
the machine functions properly. If a “S” is listed, there is a new part which is used with the modified part as a set. The set can be installed in pre-modification machine and the machine func tions properly. If a “N” is listed, t he modified part cannot
be installed in pre-modificati on machine. Even though the modifi ed par t could be installed in the machine physicall y , it would not function properly.
The “SE/No. ” column indicates a serial No. and the following 5 meanings. 1. “Blank” shows that there is no modification.( A revised version will be followed as soon as a s erial No. is confirmed.) 2. “∗” shows that a modification has been done.( See
the above section for the details.) 3. “N/A” shows that a modification has been done.(The serial No. can not be confirmed.) 4. “AFTER” shows parts which are not used in the production line but used only as the spare parts. 5. “DISCON” shows that
the model has been discontinued for the production.
The “SFIX” column indicates the area codes ( the last three numbers on the item code). The area code “000” means the part can be used in al l areas.

DEV-E PRINTED IN JAPAN