1
OUTLINE
1 OUTLINE
2 UNIT EXPLANATION
3 DIS./ASSEMBLY
OUTLINE OF SYSTEM
OUTLINE OF SYSTEM
3
Front
Finisher Trays [FT-107]
Finisher [FS-107]
Inner Tray Unit [IT-101]
RADF [DF-314]
1 OUTLINE
Platen Cover [CV-109]
Main body
2 UNIT EXPLANATION
3 DIS./ASSEMBLY
Pedestal [DK-109]
Right Side Rear
Key counter
Total counter
2-Tray DB [DB-209/210]*
E-RDH/FAX expansion memory [MU-403/404/405]
Fax control board [FK-101/102]
1-Tray LCT DB [DB-409/410]*
Printer controller [IP-011]
Network board
[KN-304]
Expansion memory
[MU-403/404]
Printer controller [IP-421]
Expansion memory
[MU-403/404/405]
Network board [KN-303]
Hard disk [HD-103]
Postscript [PS-341]
Printer controller [IP-422]
Hard disk [Field option]
Postscript [PS-343]
Expansion memory
[MU-411]
* The DB-209 and DB-409 are not compatible with the 7022/7130/7035. The DB-210 and DB-410 are
compatible with all models.
REVISED EDITION
3
DATE
Jan. 2002
1-1
PA GE
1-1
METHOD
REPLACEMENT
7020 SERIES PRODUCT SPECIFICATIONS
7020 SERIES PRODUCT SPECIFICATIONS
1 OUTLINE
2
2 UNIT EXPLANATION
3 DIS./ASSEMBLY
1. Type
Type: Semi-console type
Copying method: Indirect electrostatic method
Original table method:
Fixed
Original alignment: Left rear standard
Photosensitive material:
OPC
Sensitizing method:
Laser writing
Paper feed trays: Two trays
(500 sheets per tray; 80g/m
Multisheet by-pass tray
(50 sheets; 80g/m2)
DB-209/210 (Two trays; 500
sheets/tray; 80g/m
DB-409/410 (One tray; 1500
sheets; 80g/m2)*
*Option
2. Functions
Originals: Sheets; book; solid object
Original size: A3 max.
Copy sizes: A3 to A5, 11x17 to 5.5x8.5
U.S.A. Europe and others
Tray1
Tray2
By-pass
tray
ADU usable paper size:
11 × 17, 8.5 × 14,
8.5 × 11, 8.5 × 11R,
5.5 × 8.5, A3, A4,
A4R, A5R, B5, B5R, F4
8.5 × 14, 8.5 × 11,
8.5 × 11R, 5.5 × 8.5,
F4, B4, A4, A4R,
B5R, A5R
11 × 17, 8.5 × 14,
8.5 × 11, 8.5 × 11R,
5.5 × 8.5, A3, A4,
A4R, A5R, B5, B5R,
F4
11 × 17, 8.5 × 14,
8.5 × 11, 8.5 × 11R,
5.5 × 8.5, A3, A4,
A4R, A5R, B5, B5R,
F4
U.S.A. Europe and others
B4, A4, A4R, B5, B5R,
A5R, F4, 8.5 × 14,
8.5 × 11, 8.5 × 11R,
5.5 × 8.5,
A3, B4, A4, A4R, B5,
B5R, A5R, 11 × 17,
8.5 × 11, 8.5 × 11R,
F4
A3, B4, A4, A4R, B5,
B5R, A5R, 11 × 17,
8.5 × 11, 8.5 × 11R,
F4
A3, B4, A4, A4R, B5,
B5R, A5R, 11 × 17,
8.5 × 11, 8.5 × 11R, F4
Magnification:
Fixed magnifications:
x1.00, x1.41, x1.22, x1.15,
x0.86, x0.82, x0.71
Special ratio: Three kinds.
Zoom magnifications:
x0.25 to x4.00 (1% steps)
Vertical magnifications:
x0.25 to x4.00 (1% steps)
Horizontal magnifications:
x0.25 to x4.00 (1% steps)
2
)
2
)*
Warm-up time (at 20˚C, at rated voltage):
Other than 7035 Within 30 seconds
3
7035
First copy out time:
Other than 7035
3
7035
Continuous copy speed (life size copies/min):
7020 20copies/minute
7022 22copies/minute
3
7025 25copies/minute
7030/7130 30copies/minute
3
7035 35copies/minute
Continuous copy count:
Copy density selections: manual (9 steps), AE
Resolution: 600 dpi x 600 dpi
E-RDH memory: Standard 32 MB
Within 45 seconds
Approx. 5 seconds
Approx. 4.2 seconds
1 to 999
Arbitrary density (2 modes)
Maximum 288 MB
3
Maximum 160 MB
(7020/25/30/35)
(7022/7130)
3. Applicable copy paper
Plain paper: 60 to 90 g/m2 high-quality
paper
Special paper: Label paper
(by-pass feed only) OHP film
Blueprint-master paper
Recycled paper
50 to 59 g/m
91 to 130 g/m
2
high-quality paper
2
high-quality paper
REVISED EDITION
3
DATE
Jan. 2002
1-2
PA GE
1-2
METHOD
REPLACEMENT
7020 SERIES PRODUCT SPECIFICATIONS
4. Options
3
Caution:
RADF: DF-314
Finisher: FS-107
Drawer base unit: DB-209*/210 (2-tray)
Inner tray unit: IT-101
Finisher trays: FT-107
Install up to two trays into FS-107
Pedestal: DK-109
Platen cover: CV-109
Key counter
Total counter
Expansion memory unit:
For E-RDH/FAX memory explanion
Expansion memory for IP-011 printer
Expansion memory for IP-421 printer
Expansion memory for IP-422 printer
3
Printer controller: IP-011/421/422
3
Fax control board: FK-101/102
Network board: KN-303
Ethernet network for IP-421
Network board: KN-304
Ethernet network for IP-011
Hard disk: HD-103
Hard disk for the IP-421
Postscript: PS-341
PostScript for the IP-421
Postscript: PS-343
3
PostScript for the IP-422
For details of the correspondence between
each of the following options and the main
body, refer to the “
LIST OF OPTIONS
THAT CAN BE USED WITH THE 7020
SERIES
”.
DB-409*/410 (1-LCT)
3
*Not applicable to machines
other than the 7020/25/30.
MU-403 : 32MB DIMM
MU-404 : 64MB DIMM
MU-405 : 128MB DIMM
MU-403 : 32MB DIMM
MU-404 : 64MB DIMM
MU-403 : 32MB DIMM
MU-404 : 64MB DIMM
MU-405 : 128MB DIMM
MU-411 : 64MB DIMM
5. Particulars of machine
Power supply: 120 VAC ±10% (for U.S.A.)
220 to 240 VAC 10%
(for Europe)
Power consumption: Max.1170W
(only main body)
Weight: Approx. 72 kg
Machine dimensions:
Width: 590mm
Depth: 595mm
Height: 765mm (With DF)
6. Maintenance
Periodic maintenance
Machine service life: 1,200,000 copies or 5 years
3
: Per 100,000 copies
(7020/25/30/35)
800,000 copies or 5 years
(7022/7130)
7. Consumables
For 7020/25/30
Developer: Exclusively for Konica 7020/25/30
Toner: Exclusively for Konica 7020/25/30
Drum: Exclusively for Konica 7020/25/30
(φ60)
For 7035
Developer: Exclusively for Konica 7035
Toner: Exclusively for Konica 7035
Drum (Note): Common to Konica 7020 (φ60)
3
For 7022/7130
Developer: Exclusively for Konica 7022/7130
Toner: Exclusively for Konica 7022/7130
Drum: Common to 7020 (φ60)
Note: Common with the 7020/25/30. However,
items which do not have 7022,7130,7035
listed on the package box should not be used.
8. Environmental conditions
Temperature: 10 to 30˚C
Humidity: 10 to 80% RH
Note: Specifications are subject to change without
notice.
1 OUTLINE
2 UNIT EXPLANATION
3 DIS./ASSEMBLY
REVISED EDITION
3
DATE
Jan. 2002
1-3
PA GE
1-3
METHOD
REPLACEMENT
CENTER CROSS SECTION
CENTER CROSS SECTION
1 OUTLINE
2
2 UNIT EXPLANATION
3 DIS./ASSEMBLY
1
V mirror unit
Toner bottle
Cleaning/tonerrecycling unit
Charging
corona unit
Image write unit
Exposure unit
Developing unit
Upper tray
CCD unit
Fixing unit
Drum unit
Separation
corona unit
Transfer
corona unit
ADU unit
(ADU door)
Lower tray
Tray 3/tray 4 paper
feed path
By-pass unit
Paper path when DB is
installed.
DB
Path of the paper for
making a two-sided copy
REVISED EDITION
1
DATE
May 2000
1-4
PA GE
1-4
METHOD
REPLACEMENT
DRIVE SYSTEM DIAGRAM
DRIVE SYSTEM DIAGRAM
[1] Main drive
2
< Fixing/Cleaning/IT-101 drive>
Paper exit drive
Fixing unit
drive
IT drive coupling
Main motor (M1)
1 OUTLINE
[IT-101]
2 UNIT EXPLANATION
Cleaning/tonerrecycling unit drive
3 DIS./ASSEMBLY
<Drum Drive>
Developer agitation
drive
Main motor (M1)
Drum drive shaft
REVISED EDITION
2
DATE
Feb. 2001
1-5
PA GE
1-5
METHOD
REPLACEMENT
1 OUTLINE
1 OUTLINE
2
2 UNIT EXPLANATION
DRIVE SYSTEM DIAGRAM
[2] Developing drive
1
Developing
sleeve
Developing unit
Drum drive
shaft
Developing
motor (M3)
3 DIS./ASSEMBLY
REVISED EDITION
1
DATE
May 2000
1-6
PA GE
1-6
METHOD
REPLACEMENT
DRIVE SYSTEM DIAGRAM
[3] Paper feed drive
<Drive from paper feed motor to loop clutch>
1
Paper feed
motor (M9)
<Drive from loop clutch>
<a. Upper tray drive>
1 OUTLINE
Loop clutch (MC2)
2 UNIT EXPLANATION
SD1 (upper) drives
when ON.
Paper feed SD
(upper) (SD1)
3 DIS./ASSEMBLY
<b. Lower tray drive>
Loop roller
(lower)
SD2 (lower)
drives when ON.
Loop roller (upper)
Loop clutch (MC2)
Loop clutch (MC2)
Paper feed solenoid (lower) (SD2)
REVISED EDITION
1
DATE
May 2000
1-7
PA GE
1-7
METHOD
REPLACEMENT
DRIVE SYSTEM DIAGRAM
1 OUTLINE
1 OUTLINE
1
<c. By-pass feed drive>
2
2 UNIT EXPLANATION
3 DIS./ASSEMBLY
Driven by SD3 ON.
By-pass
paper feed
SD (SD3)
<Registration clutch drive>
Registration clutch
(MC1)
Loop clutch (MC2)
Loop roller (By-pass)
Paper feed motor (M9)
REVISED EDITION
1
DATE
May 2000
1-8
PA GE
1-8
METHOD
REPLACEMENT
DRIVE SYSTEM DIAGRAM
[4] ADU drive
1
ADU conveyance roller
(Driven by M1)
ADU conveyance rollers
(Driven by M9)
1 OUTLINE
2 UNIT EXPLANATION
3 DIS./ASSEMBLY
ADU motor (M6)
REVISED EDITION
1
ADU roller
DATE
May 2000
1-9
PA GE
1-9
METHOD
REPLACEMENT
1 OUTLINE
1 OUTLINE
2
2 UNIT EXPLANATION
DRIVE SYSTEM DIAGRAM
[5] Reading drive
2
<Old type>
V mirror unit
Exposure unit
Optics wire (rear)
Optical motor (M2)
Optics wire (front)
3 DIS./ASSEMBLY
<New type>
2
V mirror unit
Exposure unit
Optics wire (rear)
Optical motor (M2)
REVISED EDITION
2
Optics wire (front)
Feb. 2001
DATE
1-10
PA GE
1-10
METHOD
REPLACEMENT
DRIVE SYSTEM DIAGRAM
[6] Toner supply drive
<7020/25/30>
Toner supply motor 1 (M4)
Toner bottle SD (SD6)
Toner agitation plate
Toner conveyance screw
1 OUTLINE
2 UNIT EXPLANATION
3 DIS./ASSEMBLY
3
<Other than 7020/25/30 >
Toner supply motor 1 (M4)
Toner supply motor 2 (M10)
Toner agitation plate
Toner conveyance screw
REVISED EDITION
3
DATE
Jan. 2002
1-11
PA GE
1-11
METHOD
REPLACEMENT
Loading...