Kohler TT-5230 Installation Instructions Manual
Installation Instructions
Alcohol Content Tester
These instructions describe the correct procedure for using the alcohol content tester.
WARNING: Explosive Fuel!
Gasoline is extremely ammable and its vapors can explode if ignited. Store gasoline only in approved containers, in well
ventilated, unoccupied buildings, away from sparks or ames. Do not ll the fuel tank while the engine is hot or running,
since spilled fuel could ignite if it comes in contact with hot parts or sparks from ignition. Do not start the engine near spilled
fuel. Never use gasoline as a cleaning agent.
TT-5230
This Kit Contains –
Qty. Description
1 Alcohol Content Tester
1 Installation Instructions
To Use –
1. Add water to the alcohol content tester up to the water
ll line. See Figure 1.
2. Add the gasoline to be tested into the alcohol content
tester up to the neck of the bole.
Litho In U.S.A. 2/08 Rev. A 9/10 ENGINE DIVISION, KOHLER CO., KOHLER, WISCONSIN 53044
3. Secure the cap onto the alcohol content tester and shake
vigorously.
4. Set alcohol content tester on a level surface or hold
upright. Aer a minute, the alcohol and gasoline will
separate, and the gasoline will rise to the top. The
percentage of alcohol lines will indicate the alcohol
content of the fuel. See Figure 1.
5. Properly dispose of the uid in the tester in accordance
with local regulations.
TT-5230
Installation Instructions
Alcohol Content Tester
These instructions describe the correct procedure for using the alcohol content tester, part number.
WARNING: Explosive Fuel!
Gasoline is extremely ammable and its vapors can explode if ignited. Store gasoline only in approved containers, in well
ventilated, unoccupied buildings, away from sparks or ames. Do not ll the fuel tank while the engine is hot or running,
since spilled fuel could ignite if it comes in contact with hot parts or sparks from ignition. Do not start the engine near spilled
fuel. Never use gasoline as a cleaning agent.
This Kit Contains –
Qty. Description
1 Alcohol Content Tester
1 Installation Instructions
To Use –
1. Add water to the alcohol content tester up to the water
ll line. See Figure 1.
2. Add the gasoline to be tested into the alcohol content
tester up to the neck of the bole.
Litho In U.S.A. 2/08 Rev. A 9/10 ENGINE DIVISION, KOHLER CO., KOHLER, WISCONSIN 53044
3. Secure the cap onto the alcohol content tester and shake
vigorously.
4. Set alcohol content tester on a level surface or hold
upright. Aer a minute, the alcohol and gasoline will
separate, and the gasoline will rise to the top. The
percentage of alcohol lines will indicate the alcohol
content of the fuel. See Figure 1.
5. Properly dispose of the uid in the tester in accordance
with local regulations.
The alcohol content tester may be cleaned, dried, and reused.
Retain these instructions for future reference.
Gasoline/Alcohol Blends
Gasohol (up to 10% ethyl alcohol, 90% unleaded gasoline
by volume) is approved as a fuel for Kohler engines. Other
gasoline/alcohol blends including E20 and E85 are not to be
used and not approved. Any failures resulting from use of
these fuels will not be warranted.
Percentage
of Alcohol
85%
Percentage
of Alcohol
Percentage
20%
10%
Gasoline Fill to neck
of Alcohol
Water
Figure 1. Alcohol Content Tester.
Neck of
Bottle
FLAMMABLE
Discard Properly
Water Fill
Line
The alcohol content tester may be cleaned, dried, and reused.
Retain these instructions for future reference.
Gasoline/Alcohol Blends
Gasohol (up to 10% ethyl alcohol, 90% unleaded gasoline
by volume) is approved as a fuel for Kohler engines. Other
gasoline/alcohol blends including E20 and E85 are not to be
used and not approved. Any failures resulting from use of
these fuels will not be warranted.
2
Percentage
of Alcohol
85%
Percentage
of Alcohol
20%
Percentage
10%
of Alcohol
Figure 1. Alcohol Content Tester.
FLAMMABLE
Discard Properly
Gasoline Fill to neck
Water
Neck of
Bottle
Water Fill
Line
2
Loading...