Kohler TOOBI II Series, TOOBI II 600, TOOBI II 900 Installation Instructions Manual

TOOBI II

INSTALLATION INSTRUCTIONS

VANITY TOPS & CABINETS

BEFORE YOU BEGIN

Please read these instructions carefully to familiarize yourself with the required tools, materials, and
installation sequences. Follow the sections that pertain to your particular installation. This will help you
avoid costly mistakes.

All information in these instructions is based upon the latest product information available at the time of
publication. Kohler NZ reserves the right to make changes in product characteristics, packaging, or
availability at any time without notice.

These instructions contain important care, cleaning, and warranty information - please leave instructions
for the consumer.

Turn off the water supply.

The plumbing installation must comply with Water Supply Regulations / Bylaws. The installation of the
waste and tapware must be carried out by a plumber.

Before installation carefully inspect the vanity for any signs of damage, if damage has occurred do not
proceed with the installation, and advise your supplier immediately.

ORDERING INFORMATION

This installation covers the following products in the TOOBI II range:

TOOBI II 600 Single Drawer Vanity - Slate................................................25802A-NA

TOOBI
TOOBI
TOOBI
TOOBI
TOOBI

TOOBI
TOOBI
TOOBI
TOOBI
TOOBI
TOOBI

II 600 Single Drawer Vanity - Midnight...........................................25803A-NA

II 600 Single Drawer Vanity - Sand Dune......................................25804A-NA

II 600 Vanity With Top Utility Drawer - Slate..................................25805A-NA

II 600 Vanity With Top Utility Drawer - Midnight............................ 25806A-NA

II 600 Vanity With Top Utility Drawer - Sand Dune........................25807A-NA

II 900 Single Drawer Vanity - Slate................................................25808A-NA

II 900 Single Drawer Vanity - Midnight...........................................25809A-NA

II 900 Single Drawer Vanity - Sand Dune......................................25810A-NA

II 900 Vanity With Top Utility Drawer - Slate..................................25811A-NA

II 900 Vanity With Top Utility Drawer - Midnight............................25812A-NA

II 900 Vanity With Top Utility Drawer - Sand Dune........................25813A-NA

SAFETY WARNING

Kohler products are should give continued superior and safe performance, provided:

1. They are installed, commissioned, operated and maintained in accordance with the recommendations
given in this Manual.

2. Periodic attention is given, as necessary, to maintain the products in good functional order. Refer to
‘User Information’ on page 6 of this manual.

3. When installing Kohler Products, manufacturers guidelines for power tool safety should be followed.

1403098-A02-A

-1-

CABINETRY ROUGH-IN

Reference Value

420

890

495

590

Kohler reserves the right to change marked dimensions without prior notice.

UNIT : mm

420

495

PLUMBING INSTALLATION

(a) Install the services. Hot and Cold inlets must be connected
to the correct inlet pipes.

(b) Install the waste in accordance with the manufacturers
instructions together with the overflow kit as shown
in Fig. 1.

Recommended: Kohler Click-Up DN32 Waste (7119A-*)

Caution! Make sure a watertight seal exists

on all drain connections.

Caution! Provide access to the plumbing connections
for future plumbing maintenance.

NOTE: The hot and cold water supplies must be installed with
isolating valves.

Overflow

Waste

DN32 to DN40
adapter

Fig. 1

-2-