Features
•
Two-piece design.
•
Elongated bowl offers added room and comfort.
•
Comfort Height® feature offers chair-height seating that
makes sitting down and standing up easier for most adults.
•
Top-mount two-button flush offers a choice of 1.0 or 1.6
gallons per flush (gpf).
•
Skirted trapway simplifies cleaning.
•
Combination consists of the K-4326 bowl and the K-3569
tank.
•
Patented ReadyLock™ installation system, a simple solution
for skirted toilets, saves time, hassle, and eliminates the need
to drill into the floor for standard 12" (305 mm) rough-in.
•
Standard 12" (305 mm) rough-in only. Cannot be combined
with K-5383, or K-5381 for use in 10" or 14" installations.
Technology
•
Dual-flush technology allows you to choose between a full or
partial flush.
Installation
•
Seat sold separately.
•
Standard 12" (305 mm) rough-in.
Water Conservation & Rebates
•
Eligible for consumer rebates in some municipalities.
•
This product can help a building earn Water Efficiency points
in LEED® Green Building Rating System.
Recommended Products/Accessories
K-4636 Cachet® Quiet-Close™ Elongated Toilet Seat
K-5588 Purefresh® Elongated Toilet Seat
K-186 Dual Flush Actuator
1265114 Connector Hose
Included Components
Product consists of:
4326
3569
Additional Components:
Dual flush push buttons
ReadyLock™ installation system
Tank accessory pack
Tank cover
Codes/Standards
ASME A112.19.2/CSA B45.1
ASME A112.19.14
DOE - Energy Policy Act 1992
EPA WaterSense
®
California Energy Commission (CEC)
KOHLER® Toilets and Seats Limited
Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
Color Code Description
0 White
96 Biscuit
NY Dune
95 Ice™ Grey
7 Black Black™
Persuade® Curv Comfort Height
®
Two-piece elongated dual-flush chair height toilet
K-6355
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
11-14-2021 03:41 - US/CA/MX
Persuade® Curv Comfort Height
For Back-to-Back Toilet Installations
Use a 45° double
wye fitting.
Do not use a
double sanitary tee.
12" (305 mm)
10-1/4"
(260 mm)
5" (127 mm) Range
For Existing Supply
7-1/4"
(184 mm)
11-11/16"
(297 mm)
32-7/8"
(835 mm)
Front of Bowl
12-3/8"
(314 mm)
3/8" NPT Supply
16-1/2"
(419 mm)
11" (279 mm)
11-13/16"
(300 mm)
28-3/16" (716 mm)
8-1/2"
(216 mm)
Min
C
L of Outlet
1/2"
(13 mm)
1"
(25 mm)
14-1/4"
(362 mm)
Technical Information
All product dimensions are nominal.
Toilet type: Two-piece, Floor-mount
Waste Outlet: Floor
Bowl shape: Elongated
Trap passageway: 2" (51 mm)
Water Consumption
Full: 1.6 gpf (6 lpf)
Water surface size: 4-1/2" x 5-3/4" (114 mm x 146 mm)
Rim to water
surface:
8-1/2" (216 mm)
Rough-in: 10" (254 mm)
Seat-mounting
holes:
5-1/2" (140 mm)
Notes
Install this product according to the installation
instructions.
The rough-in must be 12" (305 mm) or more
from the base of the wall or baseboard. Install
or relocate the supply and outlet as necessary
to conform to rough-in dimensions.
If this toilet is installed in new construction,
install a new supply stop following the
dimensions in the diagram.
In installations with the supply stop installed,
the existing supply stop may need to be
relocated if it is less than 8-1/2" (216 mm)
from the centerline of the toilet. Dry fit the
toilet to confirm if the supply stop needs to be
relocated.
The supplied hose will extend roughly 6" (152
mm) from the toilet. If the supplied hose does
not reach the supply stop, a longer supply hose
may be used.
For back-to-back toilet installations: Use only a
45° double wye fitting.
®
Two-piece elongated dual-flush chair height toilet
K-6355
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
11-14-2021 03:41 - US/CA/MX
Loading...