Kohler KT9484BN Specifications

Roughing-In

K-T948, K-T949, K-T950, K-951, K-952

STILLNESS

BATH AND SHOWER FAUCET TRIM

Product Information

Applicable product: Bath and shower trim, blade handle K-T948-4 Shower only trim, blade handle K-T949-4 Valve only trim, blade handle K-T950-4 Bath spout K-952

Required accessories: RiteTemp HiFlow RiteTemp valve with stops OR K-2971-KS RiteTemp valve with diverter OR K-11748-K RiteTemp valve with diverter and

stops * For a complete listing of all the RiteTemp valves, refer

to the K-304-* Speciﬁcation Sheet or Roughing-In Sheet.

valve OR K-304-*

K-11748-KS

Optional accessories: HiFlow Rite-Temp Deep roughing-in kit for Rite-Temp

(lever and cross handles)

thin wall installation kit 88526

valve

1016154

Installation Notes

Install this product according to the installation guide. NOTICE: Risk of product damage. Long screws, for

installing trim, can damage the K-2971-KS valve. Consult the trim installation guide to verify if the thin wall installation kit (88526) is needed.

Install this product according to the installation guide

Avoid cross-ﬂow conditions. Do not install shut-off device on either valve outlet.

Cap shower outlet if deck-mount spout, diverter, or handshower is connected to spout outlet.

Install straight pipe or tube drop of 7″ (17.8 cm) to 18″ (45.7 cm) with single elbow between valve and wall-mount spout.

1/2" - 14 NPT

2-1/2" (6.4 cm) D.

6-5/16" (16 cm) D.

1/2" - 14 NPT

7-7/8" (20 cm)

3/4" (1.9 cm)

2-7/8" (7.3 cm)

2-1/2" (6.4 cm) D.

8-3/4" (22.2 cm)

2-5/16" (5.9 cm)

Top of Bath

6-3/8" (16.2 cm) D.

10" (25.4 cm) To Spout (Bath Only)

5-1/2" (14 cm) Min

72" (182.9 cm) 78" (198.1 cm) To Floor (Typical)

48" (121.9 cm) To Floor (Shower Only)

STILLNESS®BATH AND SHOWER FAUCET TRIM 1031652-1-