Features
•
Single lever handle controls both on/off activation and
temperature setting.
•
2.0 gal/min (7.6 l/min) maximum flow rate.
•
Integrated push button diverter.
•
Coordinates with Toobi faucets and accessories to complete
your bathroom.
•
Pressure-balancing diaphragm technology maintains outlet
temperature within +/-3 degrees Fahrenheit during water
pressure fluctuations.
•
Showerhead features MasterClean™ sprayface for easy
cleaning.
Material
•
Includes valve trim, bath spout, showerarm with flange, and
showerhead.
•
Premium material construction with metal handle ensures
reliability and durability.
•
KOHLER finishes resist corrosion and tarnishing.
Installation
•
Trim set requires valve to complete installation.
Required Accessories
K-304/K-P304 Series Rite-Temp® Valves
or
K-2971-KS 3/4" Pressure-balancing Valve
or
K-11748 Series Rite-Temp® Valves
Toobi® Rite-Temp
Bath and Shower Valve Trim
K-T8975-4
Codes/Standards
ASME A112.18.1/CSA B125.1
DOE - Energy Policy Act 1992
EPA WaterSense
California Energy Commission (CEC)
KOHLER® Faucet Lifetime Limited
Warranty
See website for detailed warranty information.
®
®
Recommended Accessories
1151968 Service Kit
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
2-3-2018 04:17
Available Color/Finishes
Color tiles intended for reference only.
DescriptionCodeColor
Polished ChromeCP
Vibrant® Brushed NickelBN
Toobi® Rite-Temp
®
Bath and Shower Valve Trim
K-T8975-4
Technical Information
All product dimensions are nominal.
Spout:
6-3/4" (171 mm)Spout reach:
Showerhead/Body Spray:
2 gal/min (7.6 l/min)Rated maximum flow:
80 psi (5.5 bar)Pressure:
Notes
For use with automatic compensating valves rated
at 1.7 gal/min (6.4 l/min) or less.
Install this product according to the installation
guide.
Install Rite-Temp valve according to valve
installation guide.
NOTICE: Risk of product damage. Long screws,
for installing trim, can damage the K-2971-KS
valve. Consult the trim installation guide to verify
if the thin wall installation kit (88526) is needed.
Avoid cross-flow conditions. Do not install shut-off
device on either valve outlet.
Install straight pipe or tube drop of 7" (178 mm)
to 18" (457 mm) with single elbow between valve
and wall-mount spout.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
2-3-2018 04:17