Page 1
-1-
NEW ELOSIS
INSTALLATION INSTRUCTIONS
OPEN SHELF
K-77219T
BEFORE YOU BEGINBEFORE YOU BEGIN
·
·
·
·
·
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation . This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China. reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
These instructions contain important care, cleaning, and
warranty information-
Before installation carefully inspect the new fixture for any
signs of damage.
This product complies with GB/T10357.4-2013,
GB/T10357.5-2013 and GB24977-2010.
Don't use acidic or alkalic cleaners or
alcohol to clean the surface. Use a dampened cloth to
clean.
Use anchors
(not provided) rated for the loaded weight of this
product. Refer to the anchor manufacturer's
instructions.
please leave instructions for the
consumer.
WARNING:
CAUTION: Risk of property damage.
·
·
·
·
·
-
GB/T10357.4-2013 GB/T10357.5-2013
GB24977-2010
ZHONGSHAN KOHLER SHOWER CO., LTD. NO13-1, XINYE ROAD, ZHONGSHAN TORCH
DEVELOPMENT ZONE, ZHONGSHAN, GUANGDONG, CHINA POST CODE: 528437
13-1 528437
©©Copyright Kohler China Investment Co., Ltd. 2016
2016
TOOLS AND MATERIALS
Drill with Assorted Bits Assorted
Screwdrivers
Band Tape PencilLevelling Ruler
Plus:
!
!
Protective Material
Tape
!
!
ACCESSORIS LISTACCESSORIS LIST
Glass Shelves
79*242*6mm
3PCS
Wall Anchors
4PCS
Top Clips
2PCS
Screw ST3.5X35
ST3.5X35
4PCS
Shelf Clip
14PCS
Mounting Bar
1PCS
Hole Plugs
40PCS
1304454-T01-B
Page 2
-2-
Kohler reserves the right to change marked dimensions without prior notice.
ROUGHING-IN
UNIT : mm
Reference Value
852
300 100
CABINET INSTALLATIONCABINET INSTALLATION
Drill holes
4- 6mm
4- 6mm
Drill holes
4- 6mm
4- 6mm
Screw ST3.5X35
and
ST3.5X35
Wall Anchors
40mm from top part of the countertop (such as faucet)
( ) 40mm
1304454-T01-B
Page 3
-3-
INSTALLATION
STEP
1
STEP
2
Install mounting bar
Take out the mounting bar and put level. Drill holes according to the hole spaces.
Fix the clips and the cabinet
1. Put the cabinet on the mounting bar.
1.
2. Insert the clips into the two sides on cabinet top and mark with pencil. Release the clips and drill holes at marked positions.
2.
3. Fix the two clips and move to top. Put the cabinet onto the mounting bar and tighten the clips with screws.
3.
4. After completely tightening the clips, loosen the screws 5 to 7 times to avoid over tightening.
4. 5 7
Top Clip
Cabinet
Mounting Bar
1304454-T01-B
Page 4
-4-
STEP
3
Install glass shelf
1. Insert the snap-in pins into the side holes.
1.
2. Insert the glass shelf into the snap-in pins. as shown in
the illustration.
2.
A
B
1304454-T01-B
Loading...