Kohler K-72530T-R, K-72530T Installation Instructions Manual

Page 1
-1-
1044886-T01-A
BEFORE YOU BEGINBEFORE YOU BEGIN
ã ã
, 2012
Copyright Kohler China Ltd., 2012
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
E1
1.5mg/L
ORDERING INFORMATION
This installation covers the following products in the TRESHAM range:
Tresham Mirrored Cabinet (Left Hinge) ...............K-72530T
Tresham Mirrored Cabinet (Right Hinge) .........K-72530T-R
( ) ...........................................K-72530T
( )........................................K-72530T-R
SAFETY WARNINGS
Kohler products are precision-engineered and should give continued superior and safe performance, provided:
1. They are installed, commissioned, operated and maintained in accordance with the recommendations given in this Manual.
2. Periodic attention is given, as necessary, to maintain the product in good functional order. Recommended guidelines are given in the section.
Carefully inspect the new fixture for any signs of damage.
When installing Kohler products, manufacturer's guidelines for power tool safety should be followed.
MAINTENANCE
1.
2.
()
158 200436
INSTALLATION INSTRUCTIONS
MIRRORED CABINET K-72530T/K-72530T-R
TRESHAM
1201256-T01-A
Page 2
-2-
ROUGHING-IN
UNIT : mm
TOOLS AND MATERIALS
·
·
·
·
·
·
Pencil Measuring Tape Level Safety Glasses Drill Screwdrivers
·
·
·
·
·
·
Kohler reserves the right to change marked dimensions without prior notice.
Reference Value
762
133
90
133
500
500
762
1201256-T01-A
Page 3
·
·
·
·
Decide on the location of the mirrored cabinet. Mark the positions of the wall hanging brackets on the wall according to the dimensions given.
Make sure that you avoid hidden cables
and pipes when you drill holes in the wall.
CAUTION!
-3-
1. Secure the Mirrored Cabinet
WARNING: Risk of property damage. The mirrored
cabinet is heavy. Obtain sufficient help to lift or move it. It is suggested to remove the door panel before hanging the mirrored cabinet. If not, please make sure to press the door panel firmly when lifting it. Otherwise, the door panel may open by itself, which may affect installation or cause damage.
1.
INSTALLATION
!
!
!
Using a suitable drill, drill the holes for the wall hanging brackets. Secure the brackets to the wall with the appropriate wall plugs and screws. Please check with leveling ruler to ensure that the wall hanging bracket is level. Place the mirror cabinet on the wall, hanging it over the brackets on the wall.
!
·
Level the cabinet by adjusting the adjustment screws. The top screw adjusts the cabinet horizontally, and the bottom screw adjusts it vertically. Use a spirit level to ensure the cabinet is level.
!
!
!
!
·
36
17
762
17
500
1100~1200
1826~1926
1201256-T01-A
Page 4
-4-
2. Installation of Anti-Fog Film
CAUTION!
CAUTION!
To avoid electric shock, please ask the professional electrician to connect the cables. Please obey the local electricity regulations.
To avoid electric shock, please power off before cable connection.
·
Please connect the wires before hanging the mirrored cabinet if the position for wire connection is behind it.
2.
·
220V/50HZ
3.
·
·
3. Install the Door Knobs
·
·
From the back side of the door, insert the screw through the predrilled hole to the front. Thread the knob onto the screw. Tighten securely.
1201256-T01-A
Page 5
-5-
5. Door Reinstallation
5.
NOTE: To ease installation, get assistance supporting the
door.
Align the hinge hooks with the slot of the top bracket. Slide the hinge onto the top bracket. Clip the hinge onto the bracket to secure. Repeat for the lower hinge.
·
·
·
·
·
·
·
·
Bracket
Slot
Hook
4. Door Adjustments
4.
Adjustment
Removal
·
·
·
·
Refer to the illustration and note the screwdriver location for the desired adjustment.
Apply a small amount of leverage to the door with one hand to keep the door in the full open position. Press the clip to release the hinge from its bracket. Move the door forward to slide the hinges off the brackets.
·
·
·
·
Adjustments
Height
Depth
Clip
Side
Bracket
1201256-T01-A
Page 6
-6-
WARNING! Risk of product damage.
1. Many cleansers contain abrasive and chemical substance which is not suitable for cleaning stainless steel, enamel, plating or plastic products. You may use mild cleansers or soaps to clean the surfaces. Wipe any splashes of cleaner solutions from the surface with clean soft cloth.
2. Maintain ventilation in the bathroom, and separate the dry area from the damp one if conditions permit. Try to open the door and windows of the bathroom and maintain good ventilation.
3. Kohler bathroom cabinet are dealt with strict procedures for damp-proof, whose good damp-proof function ensures good performance even in bathroom of huge humidity. Yet do not splash and pour water directly on the bathroom cabinet. Make sure that the bathroom is not over damp and wipe any splashes from surfaces immediately.
4. Maintenance of door board: Clean and wipe door board regularly, and wipe the condensation vapor with dry and soft cloth.
5. Ensure that electrical connections for appliances such as head lamp is insulated; wipe mirror surface with chamois regularly to guarantee the persistent excellent performance.
6. Please do not sit, lean or step on the cabinet.
7. If any fixtures caused by abnormal reasons, Kohler China can supply paid replacement for service parts caused by abnormal reasons in the limited duration of warranty.
1.
2.
3.
4.
5.
6.
7.
USER MAINTENANCEUSER MAINTENANCE
1201256-T01-A
Loading...