Kodak VERSAMARK DP5120, VERSAMARK DP5122, VERSAMARK DP5240 Operator's Manual

KODAK VERSAMARK DP5000 Series

Remote Control Panel

Operator’s Manual

Kodak Versamark, Inc.

DP5120, DP5240, and DP5122 Printers

K

ODAK VERSAMARK

DP5000 Series Remote Control Panel

Operator’s Guide

DP5120, DP5240, and DP5122 Printers

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction man­ual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful inter­ference, in which case the user will be required to correct the interference at his own expense.

Note: Good quality, shielded (braided shielded) cables must be used for the RS-232-C and Centronics interfaces.

Canadian EMI Compliance Statement

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A
prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada.

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Reg­ulations of the Canadian Department of Communications.

EMI-CISPR 22/EN 55 022/CE Marking

Warning: This is a Class A product. In a domestic environment, this product may cause radio interference in which case the user may be
required to take adequate measures.

KODAK VERSAMARK DP5000 Series Remote Control Panel

Operator’s Guide

© Eastman Kodak Company, 2005. All rights reserved.

This document contains proprietary information of Kodak Versamark, Inc. or its licensors and is their exclusive property. It may not be
reproduced without a written agreement from Kodak Versamark, Inc. No patent or other license is granted to this information.

The software described in this document is furnished under a license agreement. The software may not be used or copied except as provided in
the license agreement.

Kodak Versamark, Inc. makes no warranty of any kind with regard to the contents of this document, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose. Kodak Versamark shall not be liable for any errors or for compensatory,
incidental or consequential damages in connection with the furnishing, performance, or use of this document or the examples contained herein.
Information concerning products not manufactured by Kodak Versamark, Inc. is provided without warranty or representation of any kind, and
Kodak Versamark, Inc. will not be liable for any damages resulting from the use of such information.

Kodak and Versamark are trademarks of Eastman Kodak Company.

0113455-602
0113455-603 5/2005 Printed in U.S.A.

Part Number Media Revision Date Description ECN

0113455-602
0113455-603

Print
PDF

001 05/2005 Revision for new features and Kodak format K5282

Previous Releases

Part Number Revision Date Description ECN

0113455 Print 002 04/2001 Final revision for DP5122 printer PKG960

0113455 Print 001 03/2001 Preliminary revision for DP5122 printer PKG938

0113767 Print 00 04/1997 Initial release 08821

Operator’s Guide iii

Scope

This guide describes how to operate a KODAK VERSAMARK DP5000 series printer
using the Remote Control Panel. The Remote Control Panel (RCP) is a hand-held
device that allows an operator to configure the printing behavior of the printer and
enables basic printer servicing without connecting a PC to the printer. The RCP is
available as an option for the DP5120, DP5240, and DP5122 printers. The RCP
can be used to perform the following operating procedures:

• Adjusting printhead phase and voltage

• Changing fluid system states in the clean, normal or purge tables

• Configuring printing behavior

• Configuring tach and cue settings

• Viewing the printer error log.

The RCP does not initiate printer operation and when it is connected, printer
operating procedures are unchanged. The RCP allows the operator to do certain
procedures while too far from the printer to reach the buttons on its fixed operator
panel.

Some legacy OEM printer controllers require the operator to configure printing
behavior at the printer. These controllers were designed for the obsolete 5000
printer (not the current DP5000 series printers). For configuration, the 5000 printer
had an 4-button operator panel with LCD display. The RCP gives this configura­tion capability to the current DP5000 series printers that have a 13-button opera­tor panel without display (see Figure 2 on page 3).

Refer to the following Kodak Versamark, Inc. manuals for additional information:

• DP5000 series

Operator’s Guide

(011848-602)

This printed manual is shipped with every printer.

• DP5000 series

Service Manual

(0113940-011)

This CD-ROM contains the following PDFs:

•Service Guide

(0113941-603)

Scope

iv DP5000 Series Remote Control Panel

• Illustrated Parts List

(0113943-603)

• Service Diagrams

(0113943-603)

• Installation Guide

(0113944-603).

To order this CD-ROM, contact technical support.

The procedures in this guide should be performed only by a printer operator
trained by Kodak Versamark, Inc.

Text Notations

This manual uses the following typographical conventions.

This style Refers to

Ready

Text displayed by the software.

go

Anything you type, exactly as it appears, whether referenced
in text or at a prompt.

ENTER

Special keys on the keyboard, such as enter, alt, and
spacebar.

[NEXT] Buttons and lights on the printer operator panel.

Save Software command buttons and sections of dialog boxes,

such as group boxes, text boxes, and text fields.

File → Open

A menu and a specific menu command.

ALT+F1

Pressing more than one key at the same time.

ALT, TAB

Pressing more than one key in sequence.

xx,yy

Variable in error messages and text.

jobfile.dat File names.

Scope

Operator’s Guide v

Safety Notations

The following definitions indicate safety precautions to the operator.

Note: Information that needs to be brought to the reader’s attention.

Caution: A situation where a mistake could result in the destruction of data or system-type

damage.

!

WARNING

A potential hazard that could result in serious injury or death.

!

DANGER

An imminent hazard that will result in serious injury or death.

Service and Support

Technical equipment support is available 24 hours a day, 7 days a week.

Software and applications support is available 8:00 a.m. to 5:00 p.m. EST/EDT,
Monday through Friday.

Call for telephone or on-site technical support; to order parts or supplies;
to request documentation or product information.

Phone Fax

U.S.A., Canada, and
worldwide

[phone]
[phone]

[phone]

Europe [phone] [phone]

Asia/Pacific Rim [phone] [phone]

Japan [phone] [phone]

Updated service
information

http://www.kodakversamark.com

Customer support [e-mail]

Operator’s Guide 1

Remote Control Panel Procedures

The procedures in this guide are divided into the following sections:

•Installation

• Display

• Selection screen

• Numeric input screen

•Installation

• Operation

• IJPDS Ethernet kit.

The first four section form an introduction that describes the Remote
Control Panel (RCP) hardware. The last section describes the IJPDS
Ethernet Kit option.

2 DP5000 Series Remote Control Panel

Remote Control Panel Procedures

Installation

Installation

The RCP is connected to the RS232 port on the back of the printer (see
Figure 1) and is powered by that port. The printer provides power only
when it is powered on. The RCP can remain attached during power-up
and shutdown cycles, and can be connected or disconnected when the
printer is powered on (hot plugged).

To install the cable to the remote control panel, carefully push the female
plug snugly into position. Be very careful not to bend the pins. To connect
the remote control panel to the printer, connect the serial port connector
to the RS-232 port at the back of the printer.

Note: Once the cable is connected to the remote control, leave it connected.

When connecting and disconnecting, do so from the printer end only.

Figure 1 Remote control panel attached to DP5120 printer

Operator’s Guide 3

Remote Control Panel Procedures

Display

Display

The Remote Control Panel is a hand held device that allows the operator
to configure the printing behavior of the printer and enable basic printer
servicing. The RCP has the following functional components (see Figure

2):

• LCD display

•Keypad.

Figure 2 Remote Control Panel functional components

The panel case protects its internal circuitry. To properly maintain the
remote control, apply the following guidelines to its care and use:

• Do not drop the remote control panel or immerse it in water.

• Clean the remote control panel with a damp cloth, do not use solvents
or cleaners. Wipe the remote control panel with a dry cloth after it has
been exposed to moisture.

• Do not take the remote control panel apart. There are no user
serviceable parts inside.

Printer operator panel

Keypad

LCD display

4 DP5000 Series Remote Control Panel

Remote Control Panel Procedures

Display

When the RCP is connected, the copyright screen (shown below)
appears and remain displayed connection is established with the printer.
If copyright screen does not clear in 2-3 minutes, check that the cable is
securely connected to the printer port.

The initial selection screen appears 5 seconds after the remote control
panel establishes printer connection. Press any key to skip the 5 second
delay.

Operator’s Guide 5

Remote Control Panel Procedures

Selection Screen

Selection Screen

A selection screen displays the current printer setting in reverse video.
The user uses the arrow keys (shown below) to move between available
selections.

Important: When the selection screen is displayed, press the up or down arrow keys

to change the contrast setting of the LCD display.

To activate the selection chosen press the enter key (shown below).

To keep the existing setting press the escape key (shown below).

Note: In Ready, some printer settings cannot be changed and the arrow keys

are disabled. Put the printer in Standby to enable the arrow keys, then
change the settings.

6 DP5000 Series Remote Control Panel

Remote Control Panel Procedures

Numeric Input Screen

Numeric Input Screen

In a numeric input screen the current printer setting is displayed above
the reverse video input field. The maximum allowable value is displayed
in the lower right hand corner of the screen. The minimum allowable value
is displayed above the maximum allowable value.

• Use the left and right arrows to move within the input field.

• Use the down arrow key to delete the current character.

• Use the numeric keys to enter a new value.

• Press

ENTER (↵) to send the value setting to the printer.

• Press

ESCAPE (!) to return to the previous screen without updating

the value setting to the printer.

Note: If an invalid setting is sent to the printer, the selection will flash and the

previous screen will not appear.

Operator’s Guide 7

Remote Control Panel Procedures

Operation

Operation

The figure below shows the numbers used in the section headings of this
guide to identify the function keys on the remote control panel. Use the
numbers to look up the description of a function or key icon.