Kodak Verite User Manual

Wireless Printer

Extended User Guide

?

We’re glad you chose this KODAK VERIT Wireless Printer.

Need help fast?

Read your Start Here Guide and/or Extended User Guide first for quick tips that make using your KODAK VERIT
Wireless Printer more enjoyable. If you have read your instructions and still need assistance, you may access our online
help at

www.kodakverite.com/support

or call 1-844-995-6325 (1-844-99KODAK)

Details, explanations, and expressions in the display panel of the actual product may differ from those shown in this
Extended User Guide. The displayed items and specifications are subject to change without notice.

Contents

Introduction ............................................................... 3

Notice and Safety ......................................................................................... 3

Dear Customer ............................................................................................. 3

About this Extended User Guide .............................................................. 3

General safety information ....................................... 4

Overview .................................................................... 7

Control panel & Menu display ...................................................................8

Meaning of LED behavior and error lights .............................................. 9

Initial operation ....................................................... 10

Packing contents ........................................................................................ 10

Unpack.......................................................................................................... 10

Install ink cartridges ....................................................................................11

Load paper ....................................................................................................12

Turn On the unit ..........................................................................................12

Initial setup ...............................................................13

Select language ............................................................................................13

Cartridge Setup............................................................................................13

Wi-Fi Setup ...................................................................................................13

Network and Password ..............................................................................14

Wi-Fi Protected Setup ................................................................................14

Before you install the printer driver .........................................................15

Changing connection type .........................................................................17

Print using your smartphone/tablet ........................18

Use the mobile App ....................................................................................18

Mobile connection by NFC for Android™ ..............................................19

Mobile connection by

(wireless direct) .........................................19

Print via cloud services ...........................................20

Google Cloud Print™ .................................................................................20

AirPrint .........................................................................................................20

Check print status from your PC ..............................21

Status Messenger for Windows® ............................................................21

Status Monitor Center for Windows® ...................................................22

Status display for Mac ..............................................................................22

Making copies ..........................................................29

Copy Setting ................................................................................................30

Check ink levels .......................................................................................... 32

Scanner .................................................................... 32

Scan in Windows® (KODAK VERITE Printer Home) .......................... 33

Scan in Mac .................................................................................................35

Settings .................................................................... 37

Maintenance ............................................................................................... 37

Paper Setup .................................................................................................38

Network Status ...........................................................................................39

Wi-Fi Setup ................................................................................................. 40

Enable Wi-Fi ................................................................................................42

Device Setup ...............................................................................................43

Direct Connect Time .................................................................................43

AirPrint .........................................................................................................43

Google Cloud Print™ .................................................................................44

Print Reports ...............................................................................................45

Restore Factory Default ............................................................................45

Web interface ..........................................................46

Confirming the IP Address .......................................................................46

Calling the Web interface .........................................................................46

Device Status ..............................................................................................47

Device Configuration .................................................................................47

Network ........................................................................................................47

Mobile ...........................................................................................................48

Order Supplies ............................................................................................48

Firmware Update ........................................................................................49

Login Password ...........................................................................................49

Service .....................................................................50

Checking ink levels .....................................................................................50

Changing the ink cartridge .......................................................................50

Ordering supplies ........................................................................................51

Fixing a paper jam .......................................................................................51

Restoring the factory settings ..................................................................51

Power cycling ...............................................................................................51

Cleaning the printhead nozzles ................................................................51

Cleaning the ink cartridge nozzles and contacts .................................52

Preserving the ink cartridges ................................................................... 52

Cleaning the scanner glass.......................................................................52

Cleaning the exterior of the unit ............................................................. 52

Periodic maintenance is required ...........................................................52

Important Notice Regarding Printheads ................................................52

Print media .............................................................. 23

Specifications for print media .................................................................23

Insert paper into the paper support ....................................................... 23

Print settings ........................................................... 25

Confirming Printing Preferences for Windows® .................................. 25

Confirming Print Settings for Mac .......................................................... 27

Using Menu display ................................................. 29

English

Troubleshooting ...................................................... 53

Setup troubleshooting ............................................................................... 53

Status messages, LCD messages and LED behaviors ......................... 56

Improving the print quality ........................................................................61

Appendix .................................................................. 62

Specifications .............................................................................................. 62

Note about recycling .................................................................................62

Material safety data sheets (MSDS) .....................................................62

Limited Warranty .................................................... 63

2

Introduction

•

•

Notice and Safety

Please read the following instructions carefully before operating the
device and refer to them as needed to ensure the continued safe
operation of your device.

Your KODAK Product and supplies have been designed and tested to
meet strict safety requirements, including safety agency evaluation
and certification, compliance with electromagnetic regulations and
established environmental standards.

The safety, environmental testing and performance of this device have
been verified using approved materials only.

WARNING: Unauthorized alterations, which may include the

Dear Customer

With the purchase of this device, you have chosen a quality KODAK
Product brand. This device fulfills the most varied requirements for
personal use or in your office/business everyday.

For printing purposes, your device utilizes the most up-to-date printing
technology. Starter Ink Cartridges are provided with the device; however,
you must remove All packaging used for transportation before you use
the device.

You can find the most up-to-date driver and manuals on the website:

www.kodakverite.com/support

We hope you enjoy your device and its many functions!

addition of new functions or connection of external
devices, may impact the product certification.
Please contact your Customer Support representative
for more information at

www.kodakverite.com/support

About this Extended User Guide

Read the entire Extended User Guide carefully.
Follow all safety instructions in order to ensure proper operation of your
device. The manufacturer accepts no liability if these instructions are not
followed.

Symbols used in this Extended User Guide

Symbols Description

DANGER

Danger to Persons

This symbol gives warning of danger to
persons. Physical injury or damage can result
from improper handling.

DO NOT TOUCH

This symbol gives warning of danger to
persons. Physical injury or damage can result
from improper handling.

Damage to the Device or Loss of Data

CAUTION C

Note(s) ❏

This symbol gives warning of damage to
the device and possible loss of data. These
damages can result from improper handling.

This symbol designates tips that will help you
to use your device more effectively and easily.

Features

Paper requirement

• You can load up to 60 sheets of normal printer paper into the paper
support.

Refer to “Specifications for print media” on page 23.

»

ID Card Copy function

• Using the ID Card Copy function, you can copy both sides of a small
document (e.g. business card) onto one page.

Refer to “ID Card Copy” on page 31.

»

Web interface

• The web interface is available to you on all operating systems.
You can access the web interface with an internet browser on your
PC and conduct many different settings to your device.

Refer to “Web interface” on page 46.

»

Status messenger (for Windows® only)

• The Status Messenger is available on the operating system.
It is installed together with the printer driver and informs you the
newest driver, firmware, or application to download and install.
Also, it shows the present status of the device. You receive detailed
error messages among other things.

Refer to “Check print status from your PC” on page 21.

»

Copying and scanning

• The device also supports copying and scanning of color or black &
white documents. You can scan the document and save it to your
network PC.

Refer to “Making copies” on page 29 and “Scanner” on page 32.

»

English

3

General safety information

•

•

•

Funai reserves the right to change products at any time without being
obliged to adjust earlier supplies accordingly.

The material in this Extended User Guide is believed adequate for the
intended use of the system. If the product or its individual modules or
procedures are used for purposes other than those specified herein,
confirmation of their validity and suitability must be obtained. Funai
warrants that the material itself does not infringe any United States
patents. No further warranty is expressed or implied.

Funai cannot be held responsible neither for any errors in the content
of this document nor for any problems as a result of the content in this
document. Errors reported to Funai will be adapted and published on the
Funai support website as soon as possible.

Warranty

• Do not attempt to take the device apart. There is danger of an
electrical shock. No components are user serviceable. Opening the
device voids the warranty. Do not disassemble or remove covers to
the inside of the device. Repairs may only be done by an authorized
service center. Failure to do so shall void any warranty, stated or
implied.

• Any operation expressly prohibited in this Extended User Guide,
any adjustments or assembly procedures not recommended or
authorized in this Extended User Guide shall void the warranty.

• Do not make any changes or settings that are not described in this
Extended User Guide. Physical injury or damage to the device or loss
of data can result from improper handling. Take note of all warning
and safety notes indicated.

• Do not remove the product label located on the bottom side from
your device; this would void the warranty.

Setting up the device

Please read the following instructions when you set up the device.

• Select a stable location.
Select a level, stable place with adequate space for air circulation.
Make sure to allow extra space to open covers and trays.
The setup area should be well-ventilated and away from direct
sunlight or sources of heat, cold, and humidity. Do not set the device
near the edge of your desk or table.

• Place the device on a flat and stable surface.

• The device should be placed securely. If the device should fall, it can
be damaged or can cause injury to people, especially small children.
If the device is dropped it should be inspected by an authorized
service center.

• Position all cables in such a way that no one will stumble on them,
thus avoiding possible injuries to persons or damage to the device
itself.

• Protect the device against direct sunlight, heat, large temperature
fluctuations and moisture. Do not place the device in the vicinity of
heaters or air conditioners. Observe the information on temperature
and humidity in the technical data.

• The device must have sufficient ventilation and may not be covered.
Do not put your device in closed cabinets or boxes. Do not place the
device on soft surfaces such as tablecloths or carpets and do not
cover the ventilation slits. Otherwise the device could overheat or
degrade.

• The area in which you operate the device must be adequately
ventilated, especially if the device is used frequently. Set up your
device in such a way that the Heat or A/C vent's air flow must be
directed away from the work station.

• Never use a gas duster on this device. This gas trapped inside of this
device may cause ignition and explosion.

• In the event that the device becomes too hot, or if you see smoke
coming from the device, you must immediately disconnect the AC
plug from the AC outlet. Have your device examined by trained
professionals at an authorized service center. To prevent the spread
of fire, open flames should be kept away from the device.

• Do not allow liquids to enter into the device. Disconnect the device
from the AC plug if liquids or foreign objects have entered the
device and have your device examined by trained professionals at
an authorized service center.

• Do not allow children to handle the device without supervision. The
packing materials should be kept out of the hands of children.

• Do not press forcefully on the scanner lid when you scan thicker
documents or three-dimensional items, this could damage the
scanner lid and/or the scanner glass.

• Make sure to place the device on a desk or table with adequate
strength. Do not shake the device as this may cause printing failure
or trouble. Do not place the device in a location or environment of
high temperature or high humidity.

Power supply

• Check whether the voltage rating of your device (indicated on the
product label located on the bottom side) is adequate for the power
source available at the setup location.

• Do not plug in the device in moist rooms. Never touch the AC power
cord or the AC plug connection with wet hands.

• Set up your device so that the AC plug is easily accessible. In an
emergency, disconnect your device from the power supply by
pulling the AC plug.

• Never touch the AC power cord if the insulation is damaged. Turn
Off the circuit breaker for that AC outlet.

• Damaged wire could cause fire or electrical shock. Keep the AC
power cord straight without being twisted, bent or scraped.
Please contact an authorized service center.

• Before cleaning the surface of your device, disconnect it from the
power supply by pulling the AC plug. Use a soft, lint-free cloth.
Never use liquid, gaseous or easily flammable cleansers (sprays,
abrasives, polishes, or alcohol). Do not allow any moisture to reach
the interior of the device.

• In rare cases, the saved settings can be partly or completely reset
to factory defaults when the AC plug is disconnected or in the event
of a power outage. Do not disconnect the AC plug right after a print
job or after entering settings.

• Press
To completely turn Off the device, you must disconnect the AC plug.
Disconnect the AC plug to shut the device Off when trouble is found
or not in use. The AC plug shall remain readily available.

(Power) to turn the device On or Off (Standby).

CAUTION C

• Turn the device Off (Standby) using (Power) button
located on the Control panel of the device before you
disconnect the AC plug from the AC outlet to turn the Unit
completely Off.

English

4

Continued on next page.

•

Federal communications commission notice

•

•

•

•

•

•

•

This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference
that may cause undesired operation.

This equipment may generate or use radio frequency energy.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.

This transmitter must not be co-located or operated in conjunction
with any other antenna or transmitter.

Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an AC outlet on a circuit different from

that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

Trademark information

All other registered and unregistered trademarks are the property of
their respective owners.

ENERGY STAR® is a joint program of the U.S.
Environmental Protection Agency and the U.S.
Department of Energy helping us all save money and
protect the environment through energy efficient
products and practices.

The Wi-Fi CERTIFIED Logo is a certification mark of
the Wi-Fi Alliance.

The Wi-Fi Protected Setup Identifier Mark is a mark of
Wi-Fi Alliance.

Google Cloud Print™ is a trademark of Google Inc.

AirPrint™ and the AirPrint logo™ are trademarks of
Apple Inc.

Declaration of conformity

Trade Name: KODAK
Responsible party: FUNAI CORPORATION, Inc.
Product Name: VERITÉ 55
Regulatory Model
Address: 19900 Van Ness Avenue, Torrance, CA

90501 U.S.A.
Telephone Number: 1-844-995-6325 (1-844-99KODAK)

For regulatory purpose, this product is assigned a regulatory model name.

The regulatory model name should not be confused with the
product name or product model.

Canadian notice

CAN ICES-3(B)/NMB-3(B)
This device complies with Industry Canada license-exempt RSS

standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.

CAN ICES-3(B)/NMB-3(B)

PC connection

Use only a custom high speed certified USB cable to connect the
device to your PC. The recommendable cable length is no longer than
5 feet (1.5 m).

: JM502-20UB (US Model)

• Windows®, Windows® Server, Windows® Vista, Internet Explorer®

and the Windows logo are trademarks of the Microsoft group of
companies in the United States and/or other countries.

• Google™, Google Chrome™, Chrome OS™, Google Drive™, Gmail™
and Android™ are trademarks of Google Inc.

• Mac OS®, OS X®,
logo® are trademarks of Apple Inc., registered in the U.S. and other
countries.

• iOS is a trademark or registered trademark of Cisco® in the U.S. and
other countries and is used under license by Apple Inc.

• Intel® Core™ is a trademark of Intel Corporation in the U.S. and/or
other countries.

Copyright

All other trademarks referenced herein are the property of their
respective owners.

Cables

Connections to this device must be made with shielded cables with
metallic RFI / EMI connector hoods to maintain compliance with FCC
Rules and Regulations.

Wireless network

The functioning of security systems, medical equipment or sensitive
devices can be disrupted by the transmission power of the device.
Observe any usage regulations (or restrictions) in the vicinity of such
equipment.

The use of this device can affect the operation of insufficiently
shielded medical devices, hearing aids and pacemakers through the
release of high frequency radiation. Also consult a doctor or the
manufacturer of a medical device to establish whether these are
sufficiently shielded from external high frequency radiation.

iPhone®, iPod touch®, iPad®,

Safari® and Mac

English

5

Continued on next page.

•

Near field communication (NFC)

•

•

•

•

•

•

Near Field Communication (NFC) is a Wireless connectivity
technology that enables convenient short-range communication
between electronic devices.

Using the NFC feature, you can directly print from your smartphone/
tablet simply by holding your smartphone/tablet over the NFC tag on
the device. Make sure you have read all the precautions below before
using the NFC.

– Do not place any metallic object on the NFC tag on the device.
– Do not place strong magnet on or near the device.
– Make sure to first turn ON the NFC feature on your smartphone/

tablet, then hold it within 0.4 inch (10 mm) from the device.

– If the NFC does not work, try moving the position of the

smartphone/tablet.

– Do not press your smartphone/tablet hard against the device. Your

smartphone/tablet or the device may be damaged.

– Depending on the material used or the thickness of the

smartphone/tablet cover, connection to the device may be
affected.

Caution when handling ink cartridges

Never open an ink cartridge. Store both new and used cartridges in a
place where they will not come into the hands of children.

Ink cartridge safety

If ink gets on your skin, wash with soap and water. If ink gets into
your eyes, flush immediately with water. If any discomfort or change
in vision persists after washing, seek medical attention immediately.

For Material Safety Data Sheets (MSDS) on inks, go to

www.kodakverite.com/support

LCD (liquid-crystal display) safety

Use only a dry, soft cloth to clean the LCD. Do not use any liquid or
chemical cleaners. If the LCD is damaged, contact Customer Support
immediately. If any of the solution from the display gets on your
hands, wash them thoroughly with soap and water.

If the liquid crystal solution gets into your eyes, flush your eyes
immediately with water. If any discomfort or change in vision persists
after washing, seek medical attention immediately.

About the firmware

When carrying out a Firmware update only use the Firmware file for
your device from the website:
Using other Firmware files can lead to your device not functioning
properly. Funai accepts no liability for device malfunctions which can
be traced back to the use of third party Firmware.

www.kodakverite.com/support

Copying and Scanning precautions

Be aware that scanning, photocopying, or editing any of the following
may be punishable by law.

Copyrighted work

Unauthorized reproduction of copyrighted work is prohibited except
for personal/domestic use or use in a limited extent based on that
purpose.

Reproducing a photographic portrait may also be subject to
punishment.

Currency, securities, etc.

Forging any of the following to use as genuine articles or producing
misleading articles is subject to punishment by law.

• Banknotes, paper money, coins (including foreign currency)

• Government bonds, territorial bonds

• Postal money order certificates

• Postal stamps, documentary stamps

• Capital stock certificates, debenture stock certificates

• Bills, checks

• Commuter passes, coupon tickets

• Other valuable paper

Official documents

Forging any of the following to use as genuine articles is subject to
punishment by law.

• Licenses, copies of corporate registration, and other
certifications/documents issued by public officials or
government offices.

• Agreements/contracts, documents of “rights and obligations”,
etc. for proof of facts created by private individuals.

• Seals, signatures, or symbol marks put on by public officials.

• Private seals and signatures

Relative laws

Criminal code, Copyright law, Act on Control of Imitation of
Currency and Securities, Alteration and Imitation of Coins, Money
Bills, Banknotes and Securities Circulating in Foreign States,
Postal Act, Act on Control of Imitation of Postal stamps, Act
on Punishment of Crimes Related to Stamps, Act on Control of
Imitation of Stamps.

When paper jam has occurred

In case of a paper jam, remove the paper carefully out of the device.
Throw the paper away carefully.
Do not make any repairs to the device yourself. Improper

maintenance can result in injuries or damage to the device. Only have
your device repaired by an authorized service center.

English

© 2015 Funai Electric Co., Ltd. All rights reserved.

The Kodak trademark and trade dress are used under license from
Eastman Kodak Company.

Funai is a registered trademark of Funai Electric Co., Ltd. and may not be
used in any way without the express written consent of Funai.

No part of this manual may be reproduced, transmitted, disseminated
or transcribed, in any form or for any purpose without the express prior
written consent of Funai. Furthermore, any unauthorized commercial
distribution of this manual or any revision hereto is strictly prohibited.
Information in this document is subject to change without notice. Funai
reserves the right to change the content herein without the obligation to
notify any person or organization of such changes.

6

Overview

•

•

•

Rear view

11 AC power cord and AC plug

Front view

1 Paper support

2 Paper guide

3 Scanner lid

4 Paper exit tray

5 Exit tray extender

6 Menu display

7 Control panel

1

2
3

12 USB port — USB connection for your PC

11

6

12

7

4
5

When opening the lid/door

8 Scanner glass

9 Ink door

10 Ink cartridge holder

8

9

10

English

7

Continued on next page.

Control panel & Menu display

•

•

1 Menu display

2 (down) button

OK

3

button

Buttons

(down)

(up)

— Use to select an item, set number of

copies, or to enter a text string on the
Menu display.

4 (up) button

5 (wireless direct) LED and button

6 (error) LED

7 button

8 button

9 (network) LED

10 (Power) LED and button

7
8

9

OK

1

2
3

4

5

6

— Use to confirm the current selection.

— Use to

· return to the previous screen

· cancel a print job

· delete the letters when inputting

· change the password

Unit status: when establishing a WPS
(Wi-Fi Protected Setup) connection

· Press and hold (less than 3
seconds): cancels the WPS
process.

— Use to

· start a print job with the current
selection

· change deleted letters when
inputting

Unit status: ready

· Press and hold (less than 3
seconds): starts copying.

After ink cartridge replacement:

· Press and hold (less than 3
seconds): starts the cartridge
alignment.

· This button is not available when
progress screen is displayed, in
Setup on the Menu display or
during job.

10

LEDs

— Indicates the connection status of the

wireless direct.

(wireless direct)

(error) — Indicates an error has occurred.

(network) — Indicates the connection status of the

(

)

Power

wireless network.

— Indicates whether the unit is supplied

with power and is online.

Note(s) ❏

• You can find the meaning of status and error lights in “Meaning
of LED behavior and error lights” on the next page. Please also
note the messages displayed in the web interface, or in the
Status Messenger (for Windows® only) on your PC.

(wireless direct)

(Power)

— Use to connect to the wireless network.

Wireless feature: On

· Press and hold (less than 3
seconds): establishes Wireless
Connection to the mobile device
using easy simple print.

· Press and hold (until the screen
of the Menu display switches):
establishes Wireless Connection
screen. Follow Step 2-4 in “Wi-Fi
Protected Setup” (right column)
on page 40.

— Press to turn the power On or Off.

Press and hold (3 seconds or less):
enters sleep mode.

Press and hold (3 seconds or more):
turns the power Off. Make sure that you
need to turn the unit back On once if the
unit is in sleep mode.

Note(s) ❏

• The function carried out will vary, depending on the unit’s status
when you press the button.

English

8

Continued on next page.

Meaning of LED behavior and error lights

•

Wireless direct LED — indicated by

Error LED — indicated by

Power LED — indicated by

Network LED — indicated by

LED(s) Behavior Meaning / Possible cause(s)

No light Unit is turned Off.

Unit status

LED lighting patterns

Blinking 1 Blinking slowly
Blinking 2
Blinking 3
Blinking 4

Lights up very rapidly
Lights up slowly No light for 3 sec.

Lights up for 3 sec. No light for 1 sec.
Blinking 5 Blinking rapidly
Blinking 6 Blinking very rapidly
Blinking 7

Blinking 8

Blinking 9

Blinking 10
Blinking 11

Lights up rapidly

Blinking very rapidly x 2 times

than 1 sec.

Blinking very rapidly x 3 times

than 2 sec.

Blinking very rapidly x 4 times

Lights up slowly

No light for more than 3 sec.

No light for 5 sec.

No light for more

No light for more

No light for 2 sec.

No light for more than 1 sec.

Lights up

and

Blinking 11

Lights up

Blinking 1

Blinking 7

Blinking 1

Blinking 5

Unit is Starting.
When you turn On, KODAK Logo with "Starting Up" and the progress bar (
the Menu display.

Indicates that the unit is Ready.
The unit is able to receive a print job.

Indicates that the unit is Running.
This LED behavior is used when printing, copying, scanning, canceling a print job and after the print jobs are
received.

Indicates that the unit is in sleep mode, a mode which is effective in saving power.
Even in this mode, the unit is able to receive a print job from USB/network equipment.

System error occurred.
Turn the power back On.

While running the alignment process, any new print job received will start printing after the alignment process
is done. (The print job is not effected while the unit is scanning the alignment pattern.)

Network status

LED(s) Behavior Meaning / Possible cause(s)

Lights up The unit is connected to the network using a wireless connection.

Blinking 2

Blinking 8

No light

Lights up

Blinking 2

Indicates that the unit started to connect to the network using a wireless connection.
The unit is not connected to the network yet.
This behavior is also used if a connection point is not found.

Indicates that the unit started to connect to the network using a WPS (Wi-Fi Protected Setup) connection.
The unit is not connected to the network yet.

Indicates that wireless connection is Off.
The unit is not connected to the network.

Indicates that the unit is directly connected to your smartphone/tablet via wireless connection.
The unit is connected to the network using easy simple print.

Indicates that the unit is in easy simple print and there is no connection point.
Connection with network equipment is not established yet.

       ) will be displayed on

English

Blinking 8

Blinking 6

Blinking 9

Blinking 10

Blinking 5

Blinking 6

Indicates that the unit started to connect to the network using easy simple print connection.
The unit is not connected to the network yet.

Indicates that the wireless function is initializing. While the initialization is in process, wireless operation will
not be available, such as using

Indicates that the unit is in process of the Google Cloud Print™ registration.
Proceed to Google account registration and register this unit to your Google account.

For more information about how to register your unit with Google Cloud Print™.
Indicates that the unit needs confirmation to complete the Google Cloud Print™ registration.

OK

Press
Indicates that the WPS connection failed.

The unit detected the router, but failed to establish a connection.
Indicates that the WPS connection failed.

The session overlap error occurred because two routers started the Wi-Fi Protection Setup simultaneously.

. For more information about how to register your unit with Google Cloud Print™.

(wireless direct).

9

Initial operation

FU
N

A
I
w

ar
r
a

nt
s
this

P
ro

du
c

t
to be

f
ree

fr
om

malfu

n
ctio

ns
a

nd
de

f
e
c
ts

i
n
b

o
th materials

a
n
d wor

km
an

s
hip fo

r
o
n

e year

f
r
o
m

the

date

of
p
urchas

e

.

LIMIT

S
A

ND EXCLU

S
I

O

NS

:

Wa
rra

n
t
y s

e
rvice i

s

o
n
ly
availab

le f

r
o
m w

ith
i

n the country where the Product

w

a
s
o

r
iginally purchas

e

d. Yo
u

m
a
y be required

t
o s
hi

p

Pr
o
duc

t
,
a
t

your ex

p

ense
, t

o
th

e
a
utho

r
i
z

ed
s
erv

i
c
e

fac
i
l
ity for the co

unt

ry whe

re t

he P

rod

u
c
t was

purch

as
ed

.

F
u
na
i
wi

l
l
re

p
a
ir

or
re

p
lac
e
t

hi
s Produ

ct i
f

it
f
ai

ls
t
o
funct

i
on pr

o

perly durin

g
th

e
w

a
r
ra

nt
y per

i
od,

s
ubject t

o any cond

i
t
i
on

s an

d/
or

l

imit

a
tio

ns
st

ate

d
h

er

e
i
n. W
a

r
rant

y
servic

e

w
i

ll

inc

l

u

d

e
a

ll

l

a

b

o
r as w

e

ll

as any

n
ece

ssa

ry
a

d

justments an

d

/
o
r

re
p

l

acement part

s
. If

Funa

i
i
s

una

b
l

e
to r

ep

a
i
r
or

rep

l

a
c

e a P

ro

d

u

ct
, Fun

a
i wi

l
l

, at its

option, re

fu

n

d

t

h

e purc

h

ase

pr
i
c
e pa

i

d

for
t

h

e
P
ro

d

u
ct pr

o
vi

d

e

d

t

h

e

P

ro

d

uc

t

h

a
s

b

een

retu

r
n
e

d

to

F
unai a

l

ong
w

it

h

p

r
oof of t

h

e

p
u
r
c

h

a
s
e price

p
a
i

d

.
R
epair

,

rep

l

ac
e
me

n
t,
or

re

f
un

d

o
f t

h

e p

u
r

c

h

ase pri

c
e

ar

e
t

h

e so

l

e re

me

d

ies un

d

er
t

h

is
warr

an
ty.

If r

epl
acement parts

a
re use

d

i
n
mak

i
ng

re
p

airs, tho

se

pa
r
t
s

ma
y

be remanufact

u
red or

ma

y
c
ontai

n

r
e
ma

n
u
fa

c
tur
ed

ma

t
eria
l

s.
I
f

it i
s

nec

e
ss

a
r
y
to

r
e

p

lace

t
he entire Product,

it may be

r
e

p

la
ced

with

a

rem

a
n
u
factured

P
r
o
d

uct.

Rem

a
n
ufactured Pr

oduc

t
s
,

p

arts

a
n

d

ma
t

er
i
a

l

s
are

w
arra

n

te

d

f
or

t

h

e rema

i
ning warran

t

y
term

of t

h

e
o
r

i
gi
na

l

P
ro

d

uct

, o
r

9
0

d

a
ys
a

fter t

h

e

d

ate o

f
t

h

e
r

e

p

ai

r
or

r
e

p
l

ac

ement

, w

h

ic

h

e

v
er is

l

o

n
g
er.

THIS WARRANTY IS EXTENDED ONLY TO THE OR

IGINAL RET

AIL PURCHASER. A PURCHASE RECEIPT OR OTHER

P
ROOF OF ORIGINAL RETAIL PURCHASE W

ILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE

U
N
DER THI

S

WARRANTY

.

T

h

is

w
a

rran

ty
s

h

a

ll

not

b

e
e
x

te
n

d

e

d

to a

n
y ot

h

e
r

p

e
rs

o
n or

transferee

.

T

h

is warra

n
ty

i
s v

o
i

d

an

d

of no e


ec

t
i
f
any

s
e
r
ia

l

num

b

ers o

n
t

h

e

p
ro

d

uct

are a

l

t

e
re

d

, rep

l

ace

d

,

d

e
f
a
c
e

d

,
m
i

ssi
ng or

i

f se
r
vi
ce

was

a
t

t
e
m

pte

d
b

y

a
n u

naut

h

orize

d

servic

e
center

.

T

h

is warr

an
t
y

on

l

y
cove

r
s
fai

l

ures

d

ue to

d

e
f
ects

in mat

e
ria

l

or w

o
r

k

m

an
s

h

i

p

w

h

ic

h

occur

d

urin

g norma

l

use.

I
t

d

oes

no
t
cover

d

amage

w

h

ic

h

occ

urs in s

h

i

p

ment, or fai

l

ures w

h

ic

h

are

ca
use

d
b

y

re

p

a

ir
s,
a

l

tera

t
io

n
s
o

r

p

ro

d

ucts not su

ppl

ie

d

b

y
F

U
N
AI

,
or

d

amage, w

h

ic

h

resu

l

ts

f
ro
m

acci

d

ent,

misus

e
,
a

b

use, m

is

h

an

dl

ing, misa

ppl

i
c
at
i

on,
a

l

t
erati

o

n
, fa

u

l

ty insta

ll

ation, im

p

ro

p

er
m

ainte

n
ance, co

mme
rcia

l

us
e

s
u
c

h

a
s
h

ot

e

l

, renta

l

o
r
o c

e use of t

h

is
p

ro

d

uct
,
or
d

am

a
g
e w
h

i
c
h

res
u
l

ts fro

m
fi re

,

fl

oo
d

,
l

ig

h

tni
n
g or

o

t

h

er
ac

t
s o

f Go
d.

THIS WARRANTY D

O

ES N

O

T
CO

VER PA

C

KIN
G

MATERIALS

,

ANY A

CC

ESS
O

RIES

,

ANY

CO

SMETI

PARTS

CO

MPLETE ASSEMBLY PARTS

,

DEM

O
O

R FL
OO

R M

O

DELS. FU

N
A
I AND

ITS REPRESENTATIVE

S

HALL IN N

O

EVENT BE LIABLE F

O

R ANY

G

ENERAL, INDIRE

T

R

NSE

OU

T

O

F

O

R

OCC

ASI

O

NED BY THE

SE

F
R THE INABILITYT

IS MADE IN LIEU OF ALL OTHER WARR

A
NTIES

THE PART F FUNAI, ALL THER WAR
FITNESS F

OR A PA

RTICULAR

ALL WAR

L

imited Warranty

Wireless Printer

www.kodakverite.com/support

www.kodakverite.com/support

Wireless Printer

What's

Do not connect USB cable until prompted.

1

Un

p

ack

a

b

c

2

ES

Desempaque

FR

Déballez

JF12

0

UB

★★★★

*2PMZ00

053H*

W

e’re

g

lad

y

ou chose this KODAK VERIT

É

Wireless Printer.

Th

is

Start here Guide

wi

ll
h

e

l

p you get your printer connecte

d

for

p

rinting, sca

nnin

g or co

p

ying. We also suggest you access

th

eExtended User Guide

an

d

rea

d

it for quic

k

tips to get t

h

e

most from your Wireless Printer

.

ES

s alegra que haya elegido esta Impresora
Nos aleg
Inalámbrica KODAK VERITÉ. Esta

g

qyg

Guía

¡Cominece

aquí!

le ayudará a conectar su

i

m

p

resora

p

ara im

p

resi

ón, escaneo o c

o

p

iado.

T

am

b

ién

l

e sugerimos

q

ue acce

d

a a

l

aGuía del

usuario ampliada

y

l

a

l

ea res

p

ecto a c

onsejos

r

ápi

d

os para o

b

tener e

l

mayor provec

h

o

d

e su

Impresora Inalámbrica.

FR

Nous sommes heureux que

vous ay

ez choisir

cette imprimante sans fi l KODAK VERITÉ.

qy

C

e Guide Commencez ici

v

ous

a

i

de

r

a
à

c

onnecter votre im

p

rim

ante

p

our

l

’

i

m

p

ression,

l

a

numé

risation ou

l

a copie. Nous vous

s

uggérons

d

’accé

d

er au Guide d’utilisateur

étendu

et

d

e le li

re

p

our de

s

conseils ra

p

ides

vous

p

ermettant de

p

rofi ter

p

leinement de

votre im

p

rimante sans fi

l

.

S

tart here

•

FUNAI warrants this Product to be free from malfunctions and defects in both materials and workmanship for one year from the date

of purchase

.

LIMITS AND EXCLUSI

O

NS

:

Warranty service is only available from within the country where the Product was originally purchased. You may be required to s

hip

Product, at your expense, to the authorized service facility for the country

where the Product was purchased

.

F
un

ai will repair or replace thi

s Product if it fails to function properly during the warranty period, subject to any conditions and/or

l

imitations state

d
h

erein. Warranty service wi

ll

inc

l

u

d

e a

ll
l

a

b

or as we

ll

as any neces

sary a

d

justments an

d

/or rep

l

acement parts. If

Funai is una

bl

e to repair or rep

l

ace a Pro

d

uct, Funai wi

ll

, at its option, refun

d

t

h

e purc

h

ase price pai

d

for t

h

e Pro

d

uct provi

d

e

d

t

h

e

Pro

d

uct

h

as

b

een returne

d

to Funai a

l

ong wit

h

proof of t

h

e purc

h

ase price pai

d

. Repair, rep

l

acement, or refun

d

of t

h

e purc

h

ase price

are t

h

e so

l

e
reme

d

ies un

d

er t

h

is warranty.

If replacement parts are used in making repa

irs, those parts may be remanufactured or may contain remanufactured materials. If

it is necessary to re

p

lace the entire Product, it may be re

p

laced with a remanufactured Product. Remanufactured Products,

p

arts

an

d

materia

l

s are warrante

d

for t

h

e remaining warranty term of t

h

e origina

l

Pro

d

uct, or 90

d

ays after t

h

e

d

ate of t

h

e re

p

air or

re

pl

acement, w

h

ic

h

ever is

l

onger.

THIS WARRANTY IS EXTENDED ONLY T

O THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER

PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE

UNDER THI

S

WARRAN

TY

.

T

h

is warranty s

h

a

ll

not

b

e exten

d

e

d

to any ot

h

er

p

erson or transferee

.

T

h

is warranty is voi

d

an

d

of no e ect if any seria

l

num

b

ers on t

h

e pro

d

uct are a

l

tere

d

, rep

l

ace

d

,

d

eface

d

, missing or if service was

attempte

d

b

y an unaut

h

orize

d

service center

.

T

h

is warranty on

l

y covers fai

l

ure

s

d

ue to

d

efects in ma

teria

l

or wor

k

mans

h

i

p

w

h

ic

h

occur

d

uring norma

l

use. It

d

oes not cover

d

amage

w

h

ic

h

occurs in s

h

i

p

ment, or fai

l

ures w

h

ic

h

are cause

d
b

y r

e

p

airs, a

l

terations or

p

ro

d

ucts not su

ppl

ie

d
b

y F

UNA

I, or

d

amage, w

h

ic

h

resu

l

ts from acci

d

ent, misuse, a

b

use, mis

h

an

dl

ing, misa

ppl

ication, a

l

teration, fau

l

ty insta

ll

ation, im

p

ro

p

er maintenance, com

mercia

l

use suc

h

as

h

ote

l

, renta

l

or o ce use of t

h

is

p

ro

d

uct, or

d

amage w

h

ic

h

resu

l

ts from fi

re,

fl

oo

d

,

l

ig

h

tning or ot

h

er acts of Go

d.

THIS WARRANTY

D

O

ES N

O

T

CO

VER PA

C

KIN

G

MATERIALS

,

ANY A

CC

ESS
O

RIES

,

ANY

CO

SMETI

C

PARTS

CO

MPLETE ASSEMBLY PARTS

,

DEM

O
O

R
FL

OO

R M

O

DELS. FUNAI AND ITS REPRESENTATIVES

R A

SHALL IN N

O

EVENT B

E LIABLE F

O

R ANY

G

ENERAL, INDIRE

T

R

NSE

U

ENTIAL DAMA

OU

T

O

F

O

R

OCC

ASI

O

NED BY THE

SE

F

R THE INABILITY

T

SE THIS PR

D

IS MADE IN LIEU OF ALL OTHER WARRANTIES

E

XPRESS OR IMPLIED

AND OFA

THE PART

F FUNAI, ALL

THER WARRANTIES IN

LUDIN

THE WARRA

FITNESS FOR A PA

RTICULAR PURPOSE

ARE HEREBY DISCLAI

LL WARRANTY INSPE

TINS AND REP

AIRS M

ST BEPE

P
RTANT:

ome states or jurisdicti

ons do notal

above limitation or exclusio
ong an imlied war
his warrant

the Unitd

L

imited Warranty

Wireless Printer

www.kodakverite.com/support

www.kodakverite.com/support

Wireless Printer

Do not connect USB cable until prompted.

1

Un

p

ack

a

b

c

2

ES

Desempaque

FR

Déballez

JF12

0

UB

★★★★

*2PMZ00053H*

W

e’re

g

lad

y

ou chose this KODAK VERIT

É

Wireless Printer.

Th

is Start here Guide

wi

ll

h

e

l

p you get your printer connecte

d

for

p

rinting, scanning or co

p

ying. We also suggest you access

th

eExtended User Guide

an

d

rea

d

it for quic

k

tips to get t

h

e

most from your Wireless Printer

.

ES

s alegra que haya elegido esta Impresora

Nos aleg
Inalámbrica KODAK VERITÉ. Esta

gq yg

Guí

a

¡Cominece aquí!

le ayudará a conectar su

i

m

p

resora

p

ara im

p

resión, escane

o

o c

o

p

iado.

T

am

b

ién

l

e sugerimos

q

ue

acce

d

a a

l

aGuía del

usuario ampliada

y

l

a

l

ea res

p

ecto a consejos

r

ápi

d

os para o

b

tener e

l

mayor provec

h

o

d

e su

Impresora Inalámbrica.

FR

N

ous sommes heureux que vous ayez choisir

cette imprimante sans fi l KODAK VERITÉ.

qy

C

e Guide Commencez ici

v

ous

a

i

de

r

a

à

c

onnecter votre im

p

rimante

p

our

l

’im

p

ression,

l

a numérisation ou

l

a copie. Nous vous

s

uggérons

d

’accé

d

er au Guide d’utilisateur

étendu

et de le lire

p

our des conseils ra

p

ides

vous

p

ermettant de

p

rofi ter

p

leinement de

votre im

p

rimante sans fi

l

.

S

tart here

•

Packing contents

1 Unit
2 Start Here Guide
3 Warranty/Safety Sheet
4 Black/Color ink cartridges

1

234

Note(s) ❏

5XL

BLACK

5XL

COLOR

ColorBlack

Removing packaging material from the unit

1 Remove the tapes used for transportation from the unit, then take

the plastic bag and binding wire out for the AC power cord from the
bottom of the unit.

3

3

2 Lift the paper support up, then remove the tape with foam

wrapping paper.

Missing package contents

• If any of the parts are missing or damaged, please contact an
authorized service center.

Unpack

Remove the unit and ink cartridges from the box using the
straps, then remove the Start Here Guide and Warranty/
Safety Sheet.

Black

Color

3 Remove the tape including the white paper.

4 Open the scanner lid, then remove the protective paper.

1 2

English

2

2

1

1

3

10

Continued on next page.

Install ink cartridges

•

2

XL

1

XL

Install ink cartridges to ink cartridge holder

1 Remove the black and color ink cartridges from packaging.

5 Set the color ink cartridge all the way into the cartridge slot on the

right side.

Color

5

XL

BLACK

2 Remove the plastic tapes on the black and color ink cartridges

using the red pull tab.

DO NOT TOUCH

• Do not touch the gold contact area on the back or the metal
nozzles on the bottom of the cartridge.

5

XL

COLOR

ColorBlack

e

e

e

d

d

d

i

i

i

l

l

l

S

S

S

6 Set the black ink cartridge all the way into the cartridge slot on the

left side.

Black

e

e

e

d

d

d

i

i

i

l

l

l

S

S

S

7 Push and click the cartridge tab to close the cartridge slot until the

cover snaps securely into position.

P

P

u

u

s

s

h

h

h

h

a

a

r

r

d

d

!

!

3 Lift the ink door to access the cartridge slot.

1

2

4 Press the cartridge tab to open the cartridge slot.

s

s

s

s

e

e

r

r

P

P

8 Close the ink door.

CAUTION C

Ink Cartridge Not Inserted Correctly!

• If the ink door does not close properly, the ink cartridges are
not inserted correctly. Remove the ink cartridges and then
insert them again correctly.

!

!

English

11

Continued on next page.

Load paper

•

DO NOT Connect

the USB c able

before t he

Driver is Installed.

Turn On the unit

Set paper into the paper support

1 Slide the paper guide to the left first.

2 Fan the plain paper to be printed and then tap the paper sheets so

the sides are the same.

3 Set the plain paper (Letter or A4 size 20 lb. or 75 g/m

paper support. You can load up to 60 plain paper sheets. Slide the
paper guide firmly against the edge of the paper.

2

) into the

1 Connect the AC plug to the AC outlet.

CAUTION C

DO NOT CONNECT the USB CABLE YET.

2

4 Open the paper exit tray and the exit tray extender.

1

2

• USB 2.0 type A-Male to type B-Male cable not included.

1

2  (Power) LED will light up, when the unit is turned On.

Loading Paper

Note(s) ❏

• You can load up to 15 index cards or postcards, 10 glossy paper
sheets or 5 envelopes on the paper support.

Refer to “Print media” on page 23.

»

English

12

Initial setup

English

Español
Français

Language

Step 1 of 5 :

Cartridge Setup

For best results,

please proceed with

cartridges setup.

Step 2 of 5 :

Cartridge Setup

Test Print

Step 3 of 5 :

Cartridge Setup

Place test print on

WKHXSSHUOHFRUQHU

of scanner. Press .

Step 4 of 5 :

Cartridge Setup

Test Scan

Step 5 of 5 :

Cartridge Setup

Cartridge Setup

complete.

Network and Password

Wi-Fi Protected Setup
Skip

Wi-Fi Setup

Select language

4 The unit will start scanning the alignment pattern to set an

appropriate alignment on this unit.

1 Press to select the desired language, then press

OK

.

• After initial setup, if you would like to change to another
language, refer to “Language” on page 43.

OK

Cartridge Setup

1 [Cartridge Setup] screen will be displayed on the Menu display.

Make sure plain letter or A4 size paper is loaded in the paper
support, then press

.

NextSkip

5 When alignment is completed, [Cartridge Setup complete]

message will be displayed on the Menu display, then press

OK

Next

Note(s) ❏

• Make sure to use only blank paper (sold separately).
Never use colored or patterned paper when you set the
alignment.

OK

.

2 The unit will start printing the alignment pattern.

3 Open the scanner lid and place the alignment pattern paper facing

down on the scanner glass, then press
scanner lid.

after closing the

ScanBack

Wi-Fi Setup

Select Wi-Fi Setup type and follow the Menu display instructions.

OK

Note(s) ❏

• The factory default network connection method is a DHCP
connection (automatic acquisition).

• If you would like to set the IP address manually, refer to below.

– You can setup from the Menu Control Panel, then select the

[IP Address]. IP Address...Navigate to [Home > Setup > Wi-Fi
Setup > IP Address] and press

Refer to “Wi-Fi Setup - IP Address” on page 41.

»

• When performing network connection, make sure the unit is not
placed too far away from the access point/router and the access
point/router is powered On and its settings are correct.
If you need additional help on network problems, visit our
website at

www.kodakverite.com/support

OK

.

English

&

&

e

e

s

s

r

r

e

e

v

v

e

e

c

c

e

e

a

a

l

l

R

R

p

p

13

Continued on next page.

Network and Password

Network and Password

Wi-Fi Protected Setup

Skip

Wi-Fi Setup

XXXXXXXX

XXXXXXXX

XXXXXXXX

Other

Network and Password

Network and Password

SSID: XXXXXXXX

Password:

XXXXXXXX

Network and Password

Connected to

XXXXXXXX

Press to print report.

Press to continue.

Network and Password

3XVK:36EXRQ

RQ:L)LURXWHU

120

W

L)L3URWHFWHG6HWXS

&RQQHFWHGWR

XXXXXXXX

W

L)L3URWHFWHG6HWXS

:L)L6HWXS

1HWZRUNDQG3DVVZRUG

:L)L3URWHFWHG6HWXS

6NLS

1 If you would like to connect to a router manually, press to

select [Network and Password], then press

OK

OK

.

5 [Connected to network...] message will appear on the Menu display

when the Connection is successful. Press
Connection setting is completed.

OK

Print

Continue

OK

Refer to “Wi-Fi Setup - Network and Password” on page 40.

»

OK

twice, then the

2 SSID names of routers are listed on the Menu display. Select the

SSID that you would like to connect, then press

• If the SSID that you would like to connect to is not displayed in

OK

the list, select [Other] then press

. Enter the SSID name, then

select the SSID security type.

Back

OK

Select

OK

.

3 [Enter Password] will appear on the Menu display, then enter

Password. Press
After entering the Password, press

OK

press

.

• If you would like to use capital letters, numbers or symbols, press
.

• When you enter a wrong letter, then you can erase it by pressing

.

to select a letter, then press OK.

to select [Done], then

Enter Password

a bcdefghi j

klmnopqrst
uvwxyz Done

ABC

OK

Select

Wi-Fi Protected Setup

1 Press to select [Wi-Fi Protected Setup] then press
2 Press the WPS button on router.

*

WPS

OK

&DQFHO

OK

1H[W

How long the WPS button must be pressed and other specifics vary

depending on the router type. Please refer to router’s manual.

Note(s) ❏

• If you do not want to Setup the Wi-Fi now, you can Setup later
after the initial setup is completed.

Refer to “Wi-Fi Setup” on page 40.

»

WPS

OK

.

4 Confirm the SSID name and Password displayed on the Menu

display, then press

English

OK

. The unit will start connecting to the router.

OK

Back Continue

If you would like to setup Wi-Fi later...

1 Press to select [Skip] then press

OK

twice.

2 Press

OK

to go to [Home].

14

Wi-Fi Setup

Network and Password
Wi-Fi Protected Setup

Skip

BackOKContinue

Wi-Fi Skipped

To install Wi-Fi later,

go to

the Wi-Fi setup menu.

BackOKContinue

Continued on next page.

Before you install the printer driver

•

DO NOT Connect

the USB c able

before t he

Driver is Installed.

•

•

•

Requirements

Your PC must have one of the following operating systems.

Microsoft® Windows®

OS Version Processor Browser USB port

Windows® 8.1

Windows® 8
Windows® 7

Windows® Vista

Windows® Server 2012
Windows® Server 2008
Windows® Server 2003

Apple Mac OS

OS Version Processor Browser USB port

OS X v10.9

(Mavericks)

OS X v10.8

(Mountain Lion)

OS X v10.7

(Lion)

Mac OS X v10.6

(Snow Leopard)

32-bit (x86) or

64-bit (x64)

Intel® Core™

Processor

Internet

Explorer®

Safari

USB 2.0

High Speed

or

Full Speed

USB 2.0

High Speed

or

Full Speed

How to download the printer driver

1 From your computer go to www.kodakverite.com/support and

select the "Download" Tab.

2 Select "PC Drivers, Firmware & Software" then follow Instruction

on your computer.

Download

Download the printer driver installer file to your PC.

Install

For Windows® users

• Make sure that your PC is turned On and you are logged on with
administrator rights.

• In this Extended User Guide, the file extensions of the programs,
files are omitted. If you set your PC to show the file extensions, the
program and file names appear to be different from those described
in this user guide.

• In this Extended User Guide, the appearance of the screen images
are based on Windows® 7; however, other operating systems (e.g.,
Windows® 8, etc.) provide basically the same operations. (There
may be programs and functions named differently.)

CAUTION C

• If there are any programs running, close them first.

• The screens may differ depending on your operating system.

• Make sure the USB cable (not included) is NOT connected to the
unit. If you have already connected the cable, disconnect it.

CAUTION C

DO NOT CONNECT the USB CABLE YET.

1 Double-click on the downloaded installer file to extract it.

KODAKVERITE55-vxxxxx

Driver’s version

2 If “User Account Control” window appears, click “Yes”.

• USB 2.0 type A-Male to type B-Male cable not included.

English

15

Continued on next page.

For Mac users

•

1 Double-click the downloaded installer file to mount it.

KODAKVERITE55-vxxxxx

Driver’s version

2 The following window will appear. Double-click on [KODAK

VERITE50 Series_Print.mpkg].

Note(s) ❏

• If the installer does not start when you double-click [KODAK
VERITE50 Series_Print.mpkg], please try the following steps:

1 Select [System Preferences] in the Apple Menu. The Apple

Menu is located on the top left of the screen. Click the Apple
icon to display the pull-down menu.

2 Click [Security & Privacy].
3 Click the [General] tab and you will see the [Allow application

downloaded from:] option. If the setting is locked, please
unlock it.
[Security & Privacy] window. Click the lock icon to unlock.
You may be required to enter the login password to proceed.

The Lock icon is displayed on the bottom left of the

4 Select [Anywhere] from options listed. For more information,

visit our FAQ on the website at -

www.kodakverite.com/support

Connect

1 Follow the on-screen instructions until [Select Connection Type]

appears.

2 Select your connection type, then follow the on-screen instructions

to complete the setup.

Note(s) ❏

• If you have selected [Wireless Connection], the  (network)
LED will light up when connection to access point/router is
established.

• If you have selected [USB Connection], make sure the USB cable
is connected to the unit at this point, and check the status on
your PC.

Wireless Connection

1 Make sure the unit and your PC are connected properly to the same

router (network).

2 Select [YES], then click [Continue].

English

16

Continued on next page.

3 The following window will appear. Select [KODAK VERITE 50

•

•

Series], then click [Continue]. Your PC is connected to the unit
successfully.

USB Connection

2

1

Changing connection type

If you would like to change the connection type, refer to the available
connection types below.

• Changing to “Wireless Connection” after installing the printer driver.

• Changing to “USB Connection” after installing the printer driver.

Changing to “Wireless Connection” after installing the
printer driver

If you would like to connect to the unit wirelessly after installing the
printer driver, you can use the Wireless Setup Utility (Windows®) or
Wireless Setup Assistant (Mac).

Follow the start-up Steps below

Wireless Setup Utility (for Windows®)

1 Go [Start].
2 Select [All Programs] > [KODAK VERITE] > [KODAK VERITE 50

Series] > [KODAK VERITE Printer Home].

3 Select [Settings].
4 Select [Wireless setup utility].

Your PC

1
2 Your unit

5 If “User Account Control” window appears, click “Yes”.

• After starting Wireless Setup Utility, follow the instructions on the
screen.

Wireless Setup Assistant (for Mac)

1 Select [Go] on the menu bar.
2 Select [Applications].
3 Select [KODAK VERITE].
4 Select [Wireless Setup Assistant]. The application will start.

• After starting Wireless Setup Assistant, follow the instructions on
the screen.

Changing to “USB Connection” after installing the printer
driver.

If you would like to connect to the unit with USB cable after installing
the printer driver, connect the unit and your PC with a USB cable.
Your PC will automatically recognize the unit.

English

17

Print using your smartphone/tablet

•

•

You can print the data in your smartphone/tablet directly to the unit.
Printing is also available by using the mobile App for Android™ or
iOS.

For more information, read the following requirements and usage for
your smartphone/tablet.

Requirements

Your smartphone/tablet must have one of the following operating
systems.

Android™

Use the mobile App

Printing using the print application is available.

How to download the mobile App

1 From your mobile device go to www.kodakverite.com/support
2 Click on "Download" Tab and then Select "Connect your Mobile

Device" follow Instruction.

3 Install Printer App on your smartphone/tablet using process

defined by App Site.

OS Version Memory required

Android™ 4.0.3 or later

iOS

OS Version Memory required

iOS 6.1 or later

(iPhone, iPod touch, iPad)

• In order to download the mobile App, you will need a Google
Account or an Apple ID. If you have NFC-supporting device, you
can set the mobile App for Android™ by simply placing your
smartphone/tablet near the NFC tag on the unit.

Refer to “Mobile connection by NFC for Android™” on page 19.

»

5 MB or more

free space

5 MB or more

free space

Recommended

product specification

NFC

Built-in camera

Wi-Fi

Recommended

product specification

Built-in camera

Wi-Fi

Note(s) ❏

• Connect your mobile to the same wireless network that your unit
is using.

4 When the install icon appears on your smartphone/tablet display,

then tap the install icon.

• Please visit our website for more information about the mobile App

-

www.kodakverite.com/support

Note(s) ❏

• The mobile App's name and screen images display the current
version. They may be changed due to updates.

English

18

Continued on next page.

Mobile connection by NFC for Android™

Mobile connection by (wireless direct)

Note(s) ❏

• Check whether your Android™ smartphone/tablet supports NFC
first.

1 Place your Android™ smartphone/tablet near the NFC tag on the

unit.

2 Your Android™ smartphone/tablet will be connected to the

website (Play Store) where you can download the mobile App.

3 Install the mobile App.
4 After installation is completed, place your Android™ smartphone/

tablet near the NFC tag again. The mobile App will run and your
Android™ smartphone/tablet will automatically connect to the
unit.

(wireless direct) LED will change from blinking to steady

•
lighting when the connection is completed.

• From the next time on, you can connect simply by tagging the
NFC once on the unit.

Note(s) ❏

• This unit allows you to directly print from your Android™
smartphone/tablet simply by holding your Android™
smartphone/tablet over the NFC tag on the unit.

• Using the NFC does not require installing print driver or
connecting to an access point. You will only need an NFC
supported Android™ smartphone/tablet.

• Depending on the material of the Android™ smartphone/tablet
cover, NFC recognition may not work properly. (e.g. Chromium
plating)

• Only Android™ 4.1 or higher will automatically enable the
wireless direct feature on your Android™ smartphone/tablet
when you enable the NFC feature.

Note(s) ❏

• Check whether your smartphone/tablet supports QR code
reading first.

1 Scan the QR code below (or on the Start Here Guide) with your

smartphone/tablet and visit the address obtained.

1

2

2 Your smartphone/tablet will be connected to the website (store)

where you can download the mobile App.

3 Install the mobile App.
4 After installation is completed, run the mobile App and follow its

directions and press
smartphone/tablet with the unit.

•

(wireless direct) LED will change from blinking to steady

lighting when connection is completed.

• If your smartphone/tablet and the unit have already connected
to the same router (network), you do not need to press
(wireless direct).

• From the next time on, you do not need to scan the QR code.
Simply run the mobile App, then follow its directions and press

(wireless direct) to connect your smartphone/tablet with the

unit.

(wireless direct) in order to connect your

Note(s) ❏

• QR code (Quick Response code) is a type of two-dimensional
barcode that can be read using smartphones/tablets.

English

19

Print via cloud services

This unit supports Google Cloud Print™ and iOS / OS X AirPrint.

Google Cloud Print™

Google Cloud Print™ is a service provided by Google that allows
you to print to the unit registered to your Google account using a
network-compatible device (such as a smartphone/tablet or PC),
without installing the printer driver on the unit.

Refer to “Google Cloud Print™” on page 44.

»

Google Cloud Print™

Note(s) ❏

• In order to use Google Cloud Print™, you must have a Google
account and sign in to your account.

• Make sure the unit and your smartphone/tablet or PC are
connected to the internet.

Supported operating systems and applications

Google Cloud Print™ is compatible with the following operating
systems and applications:

Supported operating systems

– Chrome OS™
– Android™ 2.1 or later
– iOS 3.0 or later

AirPrint

With iOS / OS X AirPrint, you can print photos, emails, web pages,
and documents wirelessly from your Apple devices (iPhone, iPod
touch,

iPad).

iOS / OS X AirPrint does not require a driver to be installed.

Refer to “AirPrint” on page 43.

»

Note(s) ❏

• Your Apple devices need to be connected to the same wireless
network that your unit is using.

WPS

Supported operating systems

Following Apple devices running the latest version:

– iPhone (3GS or later)
– iPod touch (3rd generation or later)
– iPad (all models)
– OS X (v10.7 or later)

• For more information about AirPrint, visit website at -

kodakverite.com/support

www.

Applications that can be used for printing

– Applications for Chrome OS™
– Google Chrome™ browser
– Google Drive™ for mobile
– Gmail™ webmail service for mobile

• For more information about Google Cloud Print™, visit website at -

www.kodakverite.com/support

English

20

Check print status from your PC

•

Status Messenger for Windows®

The Status Messenger application automatically displays an error
when a unit error has occurred. It is installed together with the printer
driver, and is added to the Start-up program by default, so it will
automatically launch at startup. It can also be activated from the
Windows Start Menu. When the Status Messenger is activated, an
icon appears in the Windows® taskbar.

Normal state:
Error or Warning:
For example, if there is no paper in the paper support, an error occurs

when you try to print...

A

A pop-up appears from the taskbar icon to provide immediate error
notification. If you click on the pop-up, an error recovery guide
appears so that you can confirm a detailed explanation on how to fix
the problem.

Color: Green
Color: Red

Error Message

Status Messenger Settings

To configure the Status Messenger, right click on the icon in the
taskbar and select [Settings].

Right

click

You can change the following items in the Status Messenger Settings.

• Alert me when a problem prevents printing

When checked: A message will pop up when an error occurs.

• Alert me when my supplies are low

When checked: A message will pop up when information is available.

• Show me detailed status about my supplies.

When checked: Status Monitor Center will be launched by clicking on
the pop-up or the icon in the Windows® taskbar.

Settings for pop-up message and detailed information display can be
configured in Status Messenger Settings.

For how to configure the settings, refer to the following instructions.

English

21

Continued on next page.

Status Monitor Center for Windows®

The Status Monitor Center application is installed together with the
printer driver and displays the status of the unit upon request.

• There are two ways to startup the Status Monitor Center.

1 Start the Status Monitor Center from Windows Start Menu.
2 Start the KODAK VERITE Printer Home – Scan from the Windows

Start Menu and click on [Maintenance] and then click on [Supplies
status].

Note(s) ❏

• You will need to select a unit to monitor at initial startup if you
have activated the Status Monitor Center from Windows Start
Menu.

Status display for Mac

You can check the Print Settings display for unit errors. Error
messages will be displayed at the bottom of the Print Settings display.

e.g. error message

Note(s) ❏

Macintosh Screenshots

• The screen shots in this guide were made with OS X 10.9. If you
use a different OS X version, the screen interfaces look slightly
different. The functions, however, are the same.

3 A new window will appear. You can check the status of the unit,

including the status of the ink level.

Status/Error Message

B

4 Click on [Refresh] to check the latest status.

Note(s) ❏

• If your OS is Windows® 8, install the printer driver for Windows®

7. You will be able to use the Status Messenger and Status
Monitor Center.

• If your OS is Windows® 8, the Status Messenger and Status
Monitor Center will not be displayed in the Windows Start Menu.
They will be displayed on the Desktop display.

Microsoft® Windows® Screenshots

• The screen shots in this guide were made with Windows® 7.
If you use a different Windows® OS version , the screen
interfaces look slightly different. The functions, however, are the
same.

English

22

Print media

Specifications for print media

You can setup normal printer paper, envelopes or printed documents
(forms) into the paper support.

Paper support

Paper Sizes Letter · Legal · JIS B5 · A4 · Executive · A5 · Statement

A6 · 3x5 in. · 4x6 in. · 5x7 in. · Hagaki · 3.5x5 in.(L)
10 Envelope · DL Envelope · C5 Envelope

Weight Plain paper: 17 - 24 lb. (64 - 90 g/m2)

Cards: 90 - 110 lb. (163 - 200 g/m2)
Envelopes: 20 - 24 lb. (75 - 90 g/m
Photo paper: 50 - 65 lb. (180 - 240 g/m

Capacity Plain paper (20 lb. or 75 g/m2): Up to 60

Cards (110 lb. or 200 g/m
Envelopes (24 lb. or 90 g/m2): Up to 5
Photo paper (65 lb. or 240 g/m2): Up to 10

• Letter, A4, A5, A6, 3x5 in., 4x6 in., 5x7 in., Hagaki, Borderless
printing is supported when printing from your PC.

CAUTION C

Unsuitable Paper!

• Do not insert any sheets of paper into the paper support…

- that are wet, have been edited with correction fluid, are soiled
or have a coated surface.

- that are held together with office or notebook staples or with
tape or glue.

- that are pasted with note paper.

- that are creased, crumpled or torn

- that are curled.

2

): Up to 15

2

)

2

)

Insert paper into the paper support

1 Slide the paper guide to left side.

2 Fan the plain paper to be printed and then tap the paper sheets so

the sides are the same.

3 Insert the paper into the paper support. You can load up to 60

plain paper sheets (20 lb. or 75 g/m
against the edge of the paper.

2

2

). Slide the paper guide firmly

0.08 inches (2 mm)
or more

Forms from a Laser Printer!

• Forms that have been printed out by a laser printer are not
suitable for further printing.

Note(s) ❏

Curled Paper

• If paper is curled, use it after flattening paper. 0.08 inches (2
mm) or more curl may cause paper jam.

Storing Paper

• To avoid curling, when you do not use the unit, unused paper is
put into package, please keep it in a flat state. And also, store it

avoiding heat, humidity, and direct sunlight.

1

English

23

Continued on next page.

4 Open the paper exit tray and exit tray extender.

Loading Pre-printed Material

• If you would like to print on an input sheet (for example, forms or
stationery), place the input sheet with the non-printed side facing
forward in the paper support.

CAUTION C

Forms from a Laser Printer!

• Forms that have been printed out by a laser printer are not
suitable for further printing.

Note(s) ❏

Loading Envelopes

• Insert the envelopes into the paper support. You can load up to 5
envelopes. Place the envelopes with the non-printed side facing
forward in the paper support.

CAUTION C

• Do not reverse the direction when loading envelopes.

Child Safety

• Do not pull out the paper support swiftly, otherwise the tray
may fall resulting in injury.

5 Make sure the inserted paper format and paper type matches the

printer settings.

Refer to “Print settings” on page 25.

»

English

24

Print settings

•

•

•

•

•

Confirming Printing Preferences for Windows®

Note(s) ❏

Microsoft® Windows® Screenshots

• The screen shots in this guide were made with Windows® 7.
If you use Windows® OS other than Windows® 7, the screen
interfaces look slightly different. The functions, however, are the
same.

Edit print settings

When you print a document, the [Print] dialog box appears.
Select [KODAK VERITE 50 Series] (this unit) and click on
[Properties] or [Preferences] and such. The changes to the settings
only apply to a print job of the respective application and only until
this application is closed.

Edit standard print settings

You can adjust the standard print settings using the print menu. Click
on [Start > Devices and Printers]. Right click on the name of the
unit and select [Printer properties]. Click on [Preferences...] in the
[General] tab.

Save Changes

Click on [Save...] on the print settings in the lower right corner, to
save the changes to the respective register. The saved configuration
information will be managed by names. Click on [Save] to apply the
settings when saving. Click on [Cancel] to close the window without
saving.

Load Settings

You can access the saved settings quickly by selecting a name from
[Load settings]. If you click on [Manage Settings...], you can manage
the settings, such as deleting it.

Layout

Page Orientation:

This function allows you to select the direction of printing on a
page. You can set whether to print in Portrait or Landscape format.
Adjusting this setting in the print settings of the application is the
best option as many programs overwrite the settings of the printer
driver.

Page Layouts:

For the page layout, you can select [Multiple pages per side (N-Up)].
If [Multiple pages per side (N-Up)] is selected, you can print multiple
pages on one side of a paper. If [Poster] is selected, you can print
a document in a larger format. The Poster option lets you enlarge a
print job to several times the standard size. Depending on the poster
size that you select, your document is divided into an equal number
of sections, each of which prints on a full sheet of paper. When all
sections have printed, you can trim the extra white space around
each page and join the individual sheets to create a poster. Supported
size of poster - 2 x 2 (4 pages), 3 x 3 (9 pages), or 4 x 4 (16 pages).

Print on Both Sides (Duplex):

You can select whether to print on one side only or manually print
on both sides. When [Print on one side only] is selected, the unit will
print on one side. When [Manually print on both sides] is selected,
the unit will print out all front pages (odd number pages), followed
by the Instruction Sheet. After the Instruction Sheet has printed,
you must manually turn the stack of printed pages (including the
Instruction Sheet on top of the printed pages) over and place them
in the paper support as instructed on the Instruction Sheet. The
Instruction Sheet will automatically be discharged in the paper exit
tray upon completion of the print job. The unit will automatically start
printing the back pages 30 seconds after the Instruction Sheet is
printed.
If [Long edge] is selected under the [Manually print on both sides]
setting, the unit will set a binding margin on the long side edge of the
paper. If [Short edge] is selected, the unit will set a binding margin on

the short side edge of the paper.
Before placing the pages with the front printed sides in the paper

support, make sure of the following to avoid paper jam or double­feed:

• All other paper (unused paper) has been removed from the
paper support.

• The ink is completely dry.

• The paper is not curled or creased. If it is, flatten the paper.

• Align the corners of the paper.

• A paper jam or double-feed may occur if the paper is in bad
condition or the printed page is placed incorrectly.

• Maximum number of sheets by paper type:
Plain paper (20 lb): 30 sheets (60 pages)
Post card: 15 sheets

Copies:

Enter the number of copies you would like to print. Activate [Collate],
if you would like to print the copies sorted and not have all the copies
of one page behind each other in succession. Activate [Reverse page
order], if you would like to change the print order to print the last
page of your document first.

English

25

Continued on next page.

•

Paper

•

•

Quality

Paper size:

Select the format of the document.

• Letter (8 1/2 x 11 in)

• Legal (8 1/2 x 14 in )

• Executive (7 1/4 x 10 1/2 in)

• Statement (5 1/2 x 8 1/2 in)

• A4 (210 x 297 mm)

• JIS B5 (182 x 257 mm)

• A5 (148 x 210 mm)

• A6 (105 x 148 mm)

• Postcard (4 x 6 in)

• Index Card (3 x 5 in)

• 2L (127 x 178 mm)

• L (89 x 127mm)

Adjusting this setting in the print settings of each application is the
best option as many programs overwrite the settings of the printer
driver. If you would like to resize the printing document, click on
[Resizing Options...]. You can also create and manage custom paper
size by selecting [Manage Custom Sizes...].

Paper type:

Select the desired paper type. Ensure that the selected paper size is
used.

• Hagaki (100 x 148 mm)

• Envelope 10 (4 1/8 x 9 1/2 in)

• Envelope DL (110 x 220mm)

• Envelope C5 (162 x 229mm)

• Letter Borderless

• A4 Borderless

• A5 Borderless

• A6 Borderless

• Hagaki Borderless

• 4 x 6 in Borderless

• L (89 x 127mm) Borderless

• 2L (127 x 178 mm) Borderless

Print Quality:

Select the Quality settings to match the document type to be
printed. You can select the type of print quality [Auto/Draft/Normal/
Best].

[Auto] Printing with a quality suitable for the paper type that is
selected.
[Draft] High-speed printing, but low image quality.
[Normal] Standard speed printing and image quality.
[Best] Highest quality image, but printing speed is low.

Sharpen:

Activate Sharpen, if you would like to add sharpness to the image.

Color Output:

Ink to Use: Select the ink type you would like to use. Select print
output from [Color] or [Black and white].

[Automatic] The unit prints by automatically selecting ink.
[Color + Black] The unit prints using both color and black ink.
[Color Only] The unit prints using only color ink.
[Black + Color (grayscale)] The unit prints in grayscale by blending black
and color ink.

[Black Only] The unit prints using only black ink.

Print Color Text as Black: Print color text using the black-and-white
ink option selected above.

Watermark

English

You can choose a watermark from three modes. (Same watermark on
all pages, a different watermark on first page, or a different watermark
on odd/even pages.) Select a watermark that you would like to add to
your print job. To add a new watermark, click on [Edit Watermarks...].

26

Continued on next page.

Confirming Print Settings for Mac

•

•

•

•

Note(s) ❏

Macintosh Screenshots

• The screen shots in this guide were made with the Preview
(Applications) of OS X 10.9. If you use other version of OS X or
other application, the screen interfaces look slightly different.
The functions, however, are the same.

Save changes

1 Click on [Presets] list box, and select [Save Current Settings as

Preset...]. The saved configuration information will be managed by
names.

2 Input name in [Preset Name:] textbox, then select [Preset Available

For:] radio button.

3 Click on [OK] to save and close the window.
4 Select [Cancel] to close window without saving.

Load settings

• You can access the saved settings quickly by selecting a name
from [Show Presets...] in [Presets] list box.

Change Print options

• In the Print Setting menu, select the Print options you want to
change in the red frame below.

Paper Size:

Select the format of the document. Adjusting this setting in the print
settings of each application is the best option as many programs
overwrite the settings of the printer driver. You can also create and
manage custom paper size by selecting [Manage Custom Sizes...].

Orientation:

Choose Portrait or Landscape output.

Edit print settings for a print job

When you print a document, follow the Steps below.

1 Open the file you want to print.
2 Select [File] on the menu bar.
3 Select [Print...], then the Printer Setting menu will be displayed.
4 If details are not displayed, select [Show Details] on the bottom

of the Print Menu. You can edit print settings when details are
displayed.

Preview

Auto Rotate:

Automatically selects portrait or landscape.

Scale:

Enter the scaling ratio.

Scale to Fit:

Input the scaling ratio of [Print Entire Image] or [Fill Entire Paper]
automatically.

Images per page:

Print multiple copies on the sheet.

English

27

Continued on next page.

•

Layout

•

•

•

•

Pages per Sheet:

Print multiple pages on one sheet.

Layout Direction:

If you print multiple pages on a sheet, select the layout direction.

Border:

Print the border on the sheet.
Reverse page orientation: If you would like to reverse page

orientation, select the checkbox.

Flip horizontally:

If you would like to flip horizontally, select the checkbox.

Cover page

If necessary, you can print the cover page.

Print Cover Page:

If you would like to print the cover page, select [Before document] or
[After document].

Cover Page Type:

If you would like to print the cover page, select the cover page type.

Quality and media

Paper handling

Pages to Print:

If you would like to print odd/even pages only, select [Odd only] or
[Even only].

Page Order:

If you would like to print in reverse order, select [Reverse].

Scale to fit paper size:

If you would like to scale to fit your printer paper, select the checkbox
and select [Destination Paper Size].

Destination Paper Size:

Select the paper size to scale.

Scale down only:

If you don’t want to scale up, select the checkbox.

Print Quality:

Select the Quality settings to match the document type to be
printed. You can select the type of print quality [Auto/Draft/Normal/
Best].

[Auto] Printing with a quality suitable for the paper type
that is selected.
[Draft] High-speed printing, but low image quality.
[Normal] Standard speed printing and image quality.
[Best] Highest quality image, but printing speed is low.

Paper Type:

Select the desired paper type. Ensure that the selected paper size is
used.

Sharpen:

Activate Sharpen, if you would like to add sharpness to the image.

Advanced Options

Color Output: Select print output from [Color] or [Black and white].
Ink to Use: Select the ink type you would like to use. Select print

output from [Color] or [Black and white].

[Automatic] The unit prints by automatically selecting ink.
[Color + Black] The unit prints using both color and black ink.
[Color Only] The unit prints using only color ink.
[Black + Color (grayscale)] The unit prints in grayscale by blending black
and color ink.

[Black Only] The unit prints using only black ink.

English

28

Using Menu display

Making copies

1 From the Control panel, use to

navigate the desired settings, and press

OK

.

2 From the Setting screen, press to

scroll to the setting you would like to set,
and then press
Use
press OK to confirm the selection.

OK

.

to select among settings, then

Home

Home

Copy

Copy Setting
Ink Levels
Scan

Copy

e.g.) Copy Setting

Copy Setting

Copies 1

Color Color
Quality Text
Resize 100%

Back Copy

The copy function is available using on the unit.

1 Lift the scanner lid on the unit.
2 Load the original print side down on the scanner glass.

3 Close the scanner lid.
4 Specify the settings as necessary.

Refer to “Copy setting” on page 30 for its settings.

»

5 Press .

6 The unit will start copying.

• To cancel copy, press

Direction of the copy

• Document is being copied as described above, printed copy
comes out as shown below.

.

English

29

Continued on next page.

Copy Setting

•

•

•

•

•

Copies

Set the number of copies.

1 From the Control panel, navigate to

[Home > Copy Setting > Copies], then

OK

press

.

Copy Setting

Copies 1

Color Color
Quality Text
Resize 100%

Back Copy

Resize

Set the resize for enlarging or compressing
the copy document.

1 From the Control panel, navigate to

[Home > Copy Setting > Resize], then

OK

press

.

Copy Setting

Copies 1
Color Color
Quality Text

Resize 100%

Back Copy

2 Select the number of copies [1] to [99].

Use
or

3 Press

to increase the number of copies

to decrease the number of copies.

OK

.

Note(s) ❏

• Each time you press at Step 2 for
a few seconds, the number of copies will
increase or decrease by 10 copies.

Color

Set the copy color setting.

1 From the Control panel, navigate to

[Home > Copy Setting > Color], then press

OK

.

2 Press to select the copy color

setting.

• Color • Black/White

3 Press

OK

to confirm.

Copies

Set number of copies.

UP

1

Down

CancelOKSetting

Copy Setting

Copies 1

Color Color

Quality Text
Resize 100%

Back Copy

Color Select

Color

Black/White

CancelOKSetting

2 Press to select the resize setting.

• 100% Default

• 130% Letter->Legal

• 104% Executive->Letter

• 97% Letter->A4

• 93% A4->Letter

Copy Resize

100% Default

130% Letter->Legal
104% Executive->Letter
97% Letter->A4

CancelOKSetting

• 85% Letter->Executive

• Custom*

Copy Resize

* You can select custom resize range from 25% to 400%. Press

to select the resize value. The default value is 100%.

3 Press

OK

to confirm.

CAUTION C

• [Resize] and [Pages per Side] can never be set at the same
time. If either setting is set, another one will be reset to the
[Resize]: [100%] or [Pages per Side]: [One].

Note(s) ❏

• Each time you press and hold under [Custom] a few
seconds, the resize value will increase or decrease by 10%.

Paper Size

Set the paper size for the copy document.

1 From the Control panel, navigate to

[Home > Copy Setting > Paper Size], then

OK

press

.

Copy Setting

Color Color
Quality Text
Resize 100%

Paper Size Letter

Back Copy

Quality

Set the copy quality.

1 From the Control panel, navigate to

[Home> Copy Setting > Quality], then

OK

press

.

2 Press to select the copy quality.

• Text

• Text&Photo

3 Press

English

OK

to confirm.

• Photo

• Draft

Copy Setting

Copies 1
Color Color

Quality Text

Resize 100%

Back Copy

Copy Quality

Text

Text/Photo
Photo
Draft

CancelOKSetting

2 Press to select the paper size.

• Letter

• Legal

• JIS B5

• A4

• Executive

• A5

• Statement

• A6

3 Press

OK

to confirm.

• 3 x 5 in.

• 4 x 6 in.

• 5 x 7 in.

• Hagaki

• 3.5 x 5 in.(L)

• 10 Envelope

• DL Envelope

• C5 Envelope

30

Copy Paper Size

Letter

Legal
JIS B5
A4

CancelOKSetting

Continued on next page.

•

Paper Type

•

rtrait

p

e

n

•

•

Set the paper type.

1 From the Control panel, navigate to

[Home > Copy Setting > Paper Type] and

OK

press

.

Copy Setting

Quality Text
Resize 100%
Paper Size Letter

Paper Type Plain

Back Copy

9 Remove the first page from the scanner

glass and place the next page.

10 Press to continue to scan the next

page. Repeat this until you have scanned
all the pages.

Copy Pages per Side

Place next page on

Flatbed Scanner and

to continue.

press

Start

2 Press to select the paper type.

• Plain

• Labels

• Envelope

3 Press

OK

to confirm.

Pages per Side

You can copy multiple pages on one sheet
by printing smaller images of each page.

• Glossy Photo

• Matte Photo

1 Lift the scanner lid on the unit.
2 Load the original print side down on the

scanner glass.

3 Close the scanner lid.

4 From the Control panel, navigate to

[Home > Copy Setting > Pages per Side],
then press

OK

.

5 Press to select from the following

printing option.

• One

• 2 in 1 Portrait

• 2 in 1 Landscape

• 4 in 1 Portrait

• 4 in 1 Landscape

Copy Paper Type

Plain

Labels
Envelope
Glossy Photo

CancelOKSetting

Copy Setting

Resize 100%
Paper Size Letter
Paper Type Plain

Pages per Side One

Back Copy

Copy Pages per Side

One

2 in 1 Portrait
2 in 1 Landscape
4 in 1 Portrait

CancelOKSetting

CAUTION C

• [Resize] and [Pages per Side] can never be set at the same
time. If either setting is set, another one will be reset to the
[Resize]: [100%] or [Pages per Side]: [One].

Brightness

Set the level of brightness.

1 From the Control panel, navigate to

[Home > Copy Setting > Brightness], then

OK

press

• Press

.

to adjust the brightness of

Paper Size Letter
Paper Type Plain
Pages per Side One

Brightness 3

Back Copy

your copy document from 5 levels.

2 Press

ID Card Copy

OK

to confirm the setting.

CancelOKSetting

You can copy both sides of a small document
(e.g. ID card, business card) onto one page.

Copy Setting

Brightness

Light

 3

Dark

2 in 1 Portrait 2 in 1 Landscape 4 in 1 Portrait 4 in 1 Landscape

21

1

2

Note(s) ❏

• If the document for printing is vertically oriented, select the
Portrait. Otherwise, select the Landscape.

6 Press

OK

.

7 Press , to start scanning the first

page.

8 On the Menu display, [Would you like

to include another page?] message will
appear. If you have the next page ready to
scan, press

• If you press
start the copying process with only the
scanned data up to that point.

English

OK

.

here, the unit will

12

4

3

include another page?

1 La

2

1

Copy Pages per Side

Would you like to

No

Include

OK

sca

Note(s) ❏

• This function is valid only with letter or
A4 size paper.

43

1 Load plain letter or A4 size paper on the

paper support.

Copy Setting

Paper Type Plain
Pages per Side One
Brightness 3

ID Card Copy

Back Copy

2 From the Control panel, navigate to

[Home > Copy Setting > ID Card Copy],
then press

OK

.

3 Lift the scanner lid on the unit.
4 Load the front side of the ID card facedown

on the scanner glass in the left rear
placement corner with arrows and then
press

.

31

Continued on next page.

ID Card Copy

Use A4 or Letter

in paper size.

Place ID card in the top

corner and press

Cancel Start

.

5 Load the back side of the ID card facedown

•

on the scanner glass in the left rear
placement corner with arrows and then
press

.

6 Copying process will start.

ID Card Copy

Copy the back side of

the ID Card?

Skip Copy

Note(s) ❏

• In the following cases, copy settings are not saved and the
settings will be reset to default.

– When you return to the [Home] setting by pressing

• If you have changed the Paper Settings in the Setup Menu, the
default value of Paper Settings in the Copy Menu will also be
changed.

Check ink levels

Ink levels

From the Control panel, navigate to
[Home > Ink Levels] and press

OK

.

Copy
Copy Setting

Ink Levels

Scan

Home

Copy

Scanner

You can use a variety of scanner functions from your smartphone/tablet
or PC. The KODAK VERITE Printer Home is available if your PC has a
Windows® platform.

The scanner function is also available by using an application called
"Image Capture" bundled as a default for Mac.

Or the mobile App for Android™ and iOS. For information on the mobile
App, refer to “Print using your smartphone/tablet” on page 18.

Note(s) ❏

• You cannot use the scan function directly with this unit.

• Load the original print side down on the scanner glass. Make sure
to align the original print to the left rear corner of the scanner

.

glass with arrow marks.

Black

Back

Ink Levels

Color

• The readable area of the scanner is not equal to the area of the
scanner glass. Therefore, when placing the document in the left
rear corner of the scanner the edges of the document may not be
scanned.

• Approx. 0.079 inch (2 mm) missing in the short side, and approx.

0.024 inch (0.6 mm) missing in the long side of the scan area.

English

32

Continued on next page.

Scan in Windows® (KODAK VERITE Printer Home)

Run the KODAK VERITE Printer Home from the Startup menu.
You can select the scan mode from 4 modes [PDF], [Advanced scan],
[Single photo] and [Multiple photos].

PDF

The scanned document is output as a PDF file.

1 Place the document on the scanner glass, then click on [PDF] on

the [KODAK VERITE Printer Home]. The unit will automatically
start the print job.

2 A preview will appear on your PC monitor when scanning is

completed.

3 Select the desired destination where the scanned document is to be

saved.

Note(s) ❏

• When you scan multiple pages, the scanned document in
succession will be saved as a single PDF data.

Advanced scan

You can change the scan settings to user-defined settings.
This mode is useful when you want to scan a part of the document.
While viewing a preview, you can change the scan settings. The
scanned data is output as a JPEG file.

1 Click on [Advanced scan].
2 Place the document on the scanner glass.
3 Double-click on the scan preview screen. A scan image will appear.

· Perform this Step as necessary. If you do not need to, skip and
move on to Step

4 Set the scan settings, such as Paper Type or Resolution as

necessary. Set the scan area by using the scan preview screen.

5 If you click on [Scan], the scan will start.
6 Select the desired destination where the scanned document is to be

saved.

Note(s) ❏

• JPEG image will be created for each scanned data.

.

4

Advanced scan window (Scan settings): [USB connection]

The following image appears via USB connection only.

Scan Presets:

Select Preset mode as necessary.
(It is possible to manage the preset mode.)

Scan Source:

Flatbed is available for scan source.

Paper Size:

Select the paper size from below:

• Letter

• Executive

• A4

• A5

• B5

• Statement

• 3x5 photo

• 4x6 photo

Resolution (dpi):

Select the scan resolution from below:

• 75 dpi

• 100 dpi

• Business card

• A6

• 8x10 in

• 5x7 in

• 3.5x5

• L

• 2L

• 10x15 cm

• 150 dpi

• 200 dpi

• 300 dpi

• 600 dpi

• 13x18 cm

• Hagaki

• 4x8 in

• 10x20 cm

• 9x13 cm

• 20x25 cm

• Custom

• 1200 dpi

Note(s) ❏

• Scanning at 2400 dpi or more is available on “High Resolution
Scanning” application included with the software.

Color Depth:

Select the scan color depth from below:

• Gray • Black and white • Color

Content Type:

Specify the content type of the scan document from below:

• Text • Text/Graphics • Photo

Scan:

Starts scan.

English

33

Continued on next page.

Scan Preview:

To display the preview of the scan data, double-click on the area
marked (1) below.

(1)

A

Setting the Scan Area

1 Double-click on the scan preview screen.
2 Set the scan area by moving the box on the scan preview screen.
3 If you click on [Scan], the scan will start.
4 Select the desired destination where the scanned document is to be

saved.

Single photo

The scanned document is output as a JPEG file.

1 Place the document on the scanner glass, then click on [Single

photo] on the [KODAK VERITE Printer Home]. The unit will
automatically start the print job.

2 A preview will appear on your PC monitor when scanning is

completed.

3 Select the desired destination where the scanned document is to be

saved.

Note(s) ❏

• JPEG image will be created for each scanned data.

Multiple photos

The scanned data is output as multiple photos.
Allow at least 1 inch of space between photos if you want to scan
multiple photos at once and save them as separate images.

1 Click on [Multiple photos] on the [KODAK VERITE Printer Home].
2 Place the document following the instructions on your PC monitor.
3 To start scanning, click on [Continue]. The document will be

automatically saved.

Note(s) ❏

• You cannot specify the destination where the document is to be
saved.

• If the photo is not created as separate images, check the
following:

– Check the distance between each photo.
– Make sure there is no dirt on the surface of the scanner glass.
– Retry with reduced number of documents.

Multiple photos Window

English

Set Scanning Area

A

Saved data

Select [Scan] to start multiple scan. Select [Cancel] to cancel.

34

Continued on next page.

•

Advanced scan (Scan settings): [Wi-Fi connection]

•

•

•

The following image appears via Wi-Fi connection only.

Orientation:

Specify the orientation of the original document on the scanner glass.

Note(s) ❏

• When connected via Wi-Fi, the Scan Preview screen will not be
displayed in the Scan settings, and [Custom] is not available in
the [Paper Size] setting.

Scan in Mac

Run the Image Capture application. (Scanning with other applications
such as “Preview” is a very similar process.)

Simplified scan mode

In the “simplified” scanner interface, follow these Steps:

1 Place the document you would like to scan on the scanner glass.
2 Open Image Capture located in the Applications folder.
3 Select this unit from list of devices.
4 Select the desired destination where the scanned document is

to be saved from the [Scan To] pop-up menu.

5 Click [Scan] to scan.
6 A preview will appear on your monitor when scanning is

completed.

Advanced scan (Advanced settings): [USB or Wi-Fi]

Brightness:

Select the brightness level. Adjust the bar toward the left end to set
the reproduction darker. Adjust the bar toward the right end to set
the reproduction lighter. The brightness level will be reflected on the
scanned data.

Contrast:

Select the contrast level. Adjust the bar toward the left end to reduce
the contrast. Adjust the bar toward the right end to increase the
contrast. The contrast level will be reflected on the scanned data.

Background Removal:

Select background removal to remove the background on the
scan data. The background removal feature adjusts the amount of
background that is visible on the scanned data.

Reset:

Select to restore the default settings.

Advanced scanning options

In the “simplified” scanner interface, click [Show Details] if you want
to enter a detailed scan mode with more advanced options.

Kind:

Select the scan color depth from below:

• Color • Black & White • Text

– Choose “Black & White” to scan an object in Grayscale (256 or

Thousands of grays).

– Choose “Text” to scan text documents.

Resolution:

Select the scan resolution from below:

• 75 dpi

• 100 dpi

– Select the [Use Custom Size] checkbox to enable the [Size]

fields to specify the width and height you want to scan. Select
pixels, inches or cm (centimeters).

• 150 dpi

• 200 dpi

• 300 dpi

• 600 dpi

• 1200 dpi

English

35

Continued on next page.

Rotation Angle:

Set the number of degrees of clockwise rotation for your scanned
image.

Auto Selection:

Choose one of the following from the [Auto selection] pop-up menu.

[Off] – to normally select the object.
[Detects Separate Items] – to automatically select and

straighten the objects you are
scanning.

[Detects Separate Items] – to include all the items on the

scanner bed in one image.

Scan To:

Select the desired destination where the scanned document is to be
saved.

Name:

Enter the name of scanned images. For multiple scans, the name
entered will be a part of incrementally named scans. For example,
enter “doc”, and the names of the scanned images will be “doc1.jpeg”,
“doc2.jpeg”, and so forth.

Format:

Select the image format of the scan from below:

• JPEG

• TIFF

• PNG

Image Correction:

When [Manual] is selected, the adjustment of the following
parameters are possible.

Document Type:

Select the type of document to be scanned from below:

• Text Only • Photo • Mixed Graphics

• JPEG 2000

• GIF

• BMP

• PDF

When choosing [Color] in [Kind:]

[Brightness] – to adjust the balance between light and dark.
[Tint] – to adjust the color balance between red and

green.

[Temperature] – to adjust the color balance of warm and cool.
[Saturation] – to adjust the vividness of colors.

When choosing [Black & White] in [Kind:]

[Brightness] – to adjust the balance between light and dark.
[Contrast] – to adjust the balance of sharpness and

softness.

English

36

Continued on next page.

When choosing [Text] in [Kind:]

•

•

– [Threshold] to adjust the transition point between dark and light.

Note(s) ❏

• Those images are created based on the screen of OS X 10.9.2.
If the version of the OS is different or the OS is updated, it is
possible that the display on the screen changes.

Settings

You can setup the unit as you like depending on your needs.

Maintenance

You can perform maintenance operations for the ink cartridge.

Clean Printhead

1 From the Control panel, navigate to

[Home > Setup > Maintenance], then press

OK

.

2 Press to select [Clean Printhead],

then press

3 Load plain Letter or A4 -size paper.

OK

.

Maintenance

Clean Printhead

Cartridge Setup

BackOKSelect

4 Press to start cleaning the

printhead.

5 A page prints, forcing ink through the ink

cartridge nozzles to clean them.

6 Print the document again to verify that the

print quality has improved.

Cartridge Setup

Print the alignment pattern for alignment
adjustment. By reading the pattern with the
scanner, the printer alignment is optimized
and the print quality would be better.

1 From the Control panel, navigate to

[Home > Setup > Maintenance], then press

OK

.

2 Press to select [Cartridge Setup],

then press

OK

.

3 [Cartridge Setup] screen will be displayed

on the Menu display. Make sure plain letter
or A4 -size paper is loaded in the paper

support, then press

.

Clean Printhead

Press

to clean Printhead.

Cancel Start

Clean Printhead

Cleaning...

Maintenance

Clean Printhead

Cartridge Setup

BackOKSelect

Cartridge Setup

Step 1 of 5 :

For best results,

please proceed with

cartridges setup.

Cancel Next

English

37

Continued on next page.

4 The unit will start printing the alignment

Place this paper on the scanner, aligned to the

upper left corner,

then press

Please Finish the step 3 of 5

Step 3

Pl

h

l

,

s

d

Set Test Pattern Printed

S

d

Set Test Pattern Printed

S

Paper on Scanner.

PaperonScanner.

Th Stt t t

Then Stert to setup

ThenSterttosetup

New Ink CartridgeeNewInkCartridge

NewInkCartridge

Exit Start

Eit Stt

•

•

pattern.

• The
blink rapidly. LED lighting pattern is
“Blinking 5”.

Refer to “Meaning of LED behavior and error

»

(Power) LED will light up then

lights” on page 9.

Cartridge Setup

Step 2 of 5 :

Test Print

Paper Setup

Sets the paper type and paper size.

Note(s) ❏

• If you change the following Paper Settings, the default paper
setting values in the Copy Menu will also be changed.

• This setting will also affect the AirPrint paper size setting.

Paper Size

Set the paper size for the copy document.

1 From the Control panel, navigate to

[Home > Setup > Paper Setup > Paper
Size], then press

OK

.

Paper Setup

Paper Size Letter

Paper Type Plain

BackOKSelect

5 Open the scanner lid on the unit. Load the

front side of the alignment pattern result
facedown at the placement corner of the
scanner glass (see below), then press

to start alignment adjustment after

closing the scanner lid.

Please Finish the step 3 of 5

then press

then pres

upper left corner,

upper left corner

Place this paper on the scanner, aligned to the

ace this paper on t

e scanner, a

igned to the

Exit Start

Then Stert to setup
Paper on Scanner.

Set Test Pattern Printed

New Ink Cartridge

Step 3

6 The unit will start scanning the alignment

pattern to set an appropriate alignment on
this unit.

Cartridge Setup

Step 3 of 5 :

Place test print on
the upper left corner
of scanner. Press

Back Scan

Cartridge Setup

Step 4 of 5 :

Test Scan

2 Press to select the paper size.

• Letter

• Legal

• JIS B5

.

• A4

• Executive

• A5

• Statement

• A6

3 Press

OK

Paper Type

to confirm.

• 3 x 5 in.

• 4 x 6 in.

• 5 x 7 in.

• Hagaki

• 3.5 x 5 in.(L)

• 10 Envelope

• DL Envelope

• C5 Envelope

1 From the Control panel, navigate to

[Home > Setup > Paper Setup > Paper
Type], then press

OK

.

2 Press to select the paper type.

• Plain

• Labels

• Envelope

3 Press

OK

to confirm.

• Glossy Photo

• Matte Photo

Paper Size

Letter

Legal
JIS B5
A4

CancelOKSetting

Paper Setup

Paper Size Letter

Paper Type Plain

BackOKSelect

Paper Type

Plain

Labels
Envelope
Glossy Photo

CancelOKSetting

7 When alignment is completed, [Alignment

successful.] message will be displayed on
the Menu display, then press

English

Cartridge Setup

OK

.

Step 5 of 5 :

Alignment successful.

OK

Press

.

OK

38

Continued on next page.

Network Status

•

•

•

•

•

You can check the following settings for the network/router
connection status.

Connection

1 From the Control panel, navigate to [Home

> Setup > Network Status > Connection],
then press

OK

.

2 The Wireless Connection status is

displayed. [Connected] or [Disconnected]
will be shown on the screen.

Connection

Signal Quality
Security
IP Address

Network Status

BackOKSelect

Connection

Connected

Back

2 The wireless security type is displayed.

[Open], [WEP-64], [WEP-128], [WPA/
WPA2-PSK] or [WPA2-PSK] will be shown

on the Menu display.

IP Address

1 From the Control panel, navigate to [Home

> Setup > Network Status > IP Address],
then press

OK

.

Security

WPA2-PSK

Back

Network Status

Connection
Signal Quality
Security

IP Address

BackOKSelect

Signal Quality

1 From the Control panel, navigate to [Home

> Setup > Network Status > Signal Quality],
then press

OK

.

2 The wireless signal quality is displayed.

[No Signal] or 8 levels of signal will be
shown on the screen.

Security

1 From the Control panel, navigate to [Home

> Setup > Network Status > Security], then

OK

press

.

Network Status

Connection

Signal Quality

Security
IP Address

BackOKSelect

Signal Quality

Signal Level

Infrastructure

Low High

Back Refresh

Network Status

Connection
Signal Quality

Security

IP Address

BackOKSelect

2 The IP address is displayed on the screen.

XXX.XXX.XXX.XXX

– The

represents the IP

address of your unit.

MAC Address

1 From the Control panel, navigate to [Home

> Setup > Network Status > MAC Address],
then press

OK

.

2 The MAC address is displayed on the

screen.

XX-XX-XX-XX-XX-XX

– The

address of your unit.

represents the MAC

IP Address

XXX.XXX.XXX.XXX

Back

Network Status

Signal Quality
Security
IP Address

MAC Address

BackOKSelect

MAC Address

XX-XX-XX-XX-XX-XX

Back

English

39

Continued on next page.

Wi-Fi Setup

•

•

You can set the following Wi-Fi settings.

Network and Password

If you would like to connect to a router
manually, follow the Steps below.

1 From the Control panel, navigate to [Home

> Setup > Wi-Fi Setup > Network and
Password], then press

2 Press Select the SSID that you

would like to connect, then press

• If it is not displayed the SSID that you
would like to connect in the list, select
[Other] then press
name, then select the security type of the
SSID.

Refer to “Manual SSID Setting” on page

»

40.

XXXXXXXXXXXX

– A

access point in your Wi-Fi range.

3 Enter Password. Press to select a

lower case letter, then press OK.

– If you would like to use capital letters,

numbers or symbols, press
Press

to go back to the lower case

letter screen.

– When you enter a wrong text character,

then you can erase it by pressing

4 After entering the Password, press

to select [Done], then press

OK

.

OK

.

OK

. Enter the SSID

represents the name of an

.

.

OK

.

Wi-Fi Setup

Network and Password

Wi-Fi Protected Setup
IP Address
Proxy

BackOKSelect

Network and Password

XXXXXXXXXXXX

XXXXXXXXXXXX
XXXXXXXXXXXX
Other

BackOKSelect

Network and Password

Enter Password

a bcdefghi j

klmnopqrst
u v w x y z Done

ABCOKSelect

Network and Password

*****************
abcdef ghi j
klmnopqrst
uvwxyz Done

ABCOKSelect

6 [Connected to...] message will appear on

the Menu display when the connection is
successful. Press
setting is completed.

Manual SSID Setting

OK

, then the connection

1 Enter SSID name of your router.

Press
then press

– If you would like to use capital letters,

numbers or symbols, press
Press
letter screen.

– When you enter a wrong text character,

then you can erase it by pressing

to select a lower case letter,

OK

.

.

to go back to the lower case

.

2 After entering the SSID name, press

to select [Done], then press

– Press  (down/up) to select the

security type of SSID, then press

OK

.

OK

.

Note(s) ❏

• When you enter the same SSID name
manually that you previously used
on this unit, the security type is set
automatically.

Network and Password

Connected to

XXXXXXXXXXXX

Press

to print report.

Press

to continue.

OK

PrintOKContinue

Network and Password

Enter SSID

a bcdefghi j

klmnopqrst
u v w x y z Done

ABCOKSelect

Network and Password

*****************
abcdef ghi j
klmnopqrst
uvwxyz Done

ABCOKSelect

Network and Password

Open

WEP-64
WEP-128
WPA/WPA2-PSK

BackOKSelect

5 Confirm the SSID name and Password

displayed on the Menu display, then press

OK

. The unit will start connecting to the

router.

English

Network and Password

SSID: XXXXXXX
Password:

*****************

BackOKContinue

Wi-Fi Protected Setup

1 From the Control panel, navigate to [Home

> Setup > Wi-Fi Setup > Wi-Fi Protected
Setup], then press

OK

.

2 Press WPS button on the router.

40

Wi-Fi Setup

Network and Password

Wi-Fi Protected Setup

IP Address
Proxy

BackOKSelect

Wi-Fi Protected Setup

Push WPS button

on Wi-Fi router.

120

Cancel

Continued on next page.

3 [Connected to XXXXXXXX] appears on

•

•

the Menu display, WPS (Wi-Fi Protected
Setup) is completed.

XXXXXXXX

– The

router.

4 Press

represents the SSID of your

OK

to [Wi-Fi Setup] screen.

Wi-Fi Protected Setup

Connected to
XXXXXXXX

Use

OK

Proxy

1 From the Control panel, navigate to [Home

> Setup > Wi-Fi Setup > Proxy], then press

OK

.

Wi-Fi Setup

Network and Password
Wi-Fi Protected Setup
IP Address

Proxy

BackOKSelect

IP Address

1 From the Control panel, navigate to [Home

> Setup > Wi-Fi Setup > IP Address], then

OK

press

.

2 Press to select [Auto] or [Manual],

then press

[Auto] DHCP mode

It's easy to Automatically get the IP address
of this unit from the network.

[Manual] Static mode

Set the network address manually.

OK

.

3 If you select [Manual], set the items below.

• IP Address

• Subnet Mask

– Press

[Subnet Mask], [Gateway] or [DNS],
then press OK.

• Default Gateway

• DNS Address

to select [IP Address],

Wi-Fi Setup

Network and Password
Wi-Fi Protected Setup

IP Address

Proxy

BackOKSelect

IP Address

Auto

Manual

BackOKSelect

IP Address

IP Address

Subnet Mask
Gateway
DNS

BackOKSelect

2 Proxy has 3 setup items.

Press
[Port], then press

Proxy

Press
press

Address

Enter proxy address. Press
a lower case letter, then press

– If you would like to press capital letters,

numbers or symbols, press

– When you enter a wrong letter, then you

can erase it by pressing

– After entering the proxy address, press

to select [Proxy] [Address]

OK

.

to select [On] or [Off], then

OK

.

to select [Done], then press OK.

to select

OK

.

.

Proxy

Proxy Off

Address
Port

BackOKSelect

Proxy

On

Off

BackOKSelect

Proxy

Enter Proxy Address

a bcdefghi j

klmnopqrst
u v w x y z Done

.

ABCOKSelect

– Set digits one at a time. Press

to select from [0] to [9], then

OK

press

.

– When you enter a wrong number, then

you can correct it by pressing .

– After you select the last digit, then press

OK

to set IP Address and return to the

previous screen.

English

(e.g.) [IP Address]
screen

IP Address

92 . 168 . 011 . 011

1

BackOKSelect

Port

Press
number, then press

– You can enter numbers only.
– When you enter a wrong number, then

– After entering the proxy port, press

41

to select a proxy port

OK

.

you can erase it by pressing

to select [Done], then press OK.

Proxy

Enter Proxy Port

1 234567890

OK

.

Continued on next page.

Done

Select

•

Host Name

1 From the Control panel, navigate to [Home

> Setup > Wi-Fi Setup > Host Name], then

OK

press

.

Wi-Fi Setup

Wi-Fi Protected Setup
IP Address
Proxy

Host Name

BackOKSelect

Enable Wi-Fi

Enable or disable the wireless network for this unit.

1 From the Control panel, navigate to

[Home > Setup > Enable Wi-Fi], then press

OK

.

Setup

Paper Setup
Network Status
Wi-Fi Setup

Enable Wi-Fi

BackOKSelect

2 The Host Name is displayed on the screen.

If you would like to change it, press

OK

.

3 Enter Host Name. Press to select a

lower case letter, then press

– Current Host Name is displayed.
– If you would like to press capital letters,

numbers or symbols, press

– When you enter a wrong text character,

then you can erase it by pressing

OK

.

.

.

4 After entering the Host Name, press

to select [Done], then press OK.

Host Name

Verite55-XXXXXXXX

BackOKChange

Host Name

Verite55-XXXXXXXX

a bcdefghi j

klmnopqrst
u v w x y z Done

ABCOKSelect

Host Name

Verite55-YYYYYYY

abcdef ghi j
klmnopqrst
uvwxyz Done

ABCOKSelect

2 Press the to select [Enable] or

[Disable].

3 Press

OK

to confirm.

Enable Wi-Fi

Enable

Disable

CancelOKSelect

English

42

Continued on next page.

Device Setup

•

•

You can set the following unit settings.

Language

1 From the Control panel, navigate to [Home

> Setup > Device Setup > Language], then

OK

press

.

Device Setup

Language English

Sleep 10min

BackOKSelect

Direct Connect Time

The Setting of the Disconnect time when no Direct Mode operation
is detected.

1 From the Control panel, navigate to

[Home > Setup > Direct Connect Time],
then press

OK

.

Setup

Wi-Fi Setup
Enable Wi-Fi
Device Setup

Direct Connect Time

BackOKSelect

2 Press the to select the desired

language from [English], [Español], or
[Français], then press

3 Press

OK

to confirm. If you would like to
change the chosen language, press
return to the [Device Setup] screen.

Sleep

OK

.

to

1 From the Control panel, navigate to [Home

Menu > Setup > Device Setup > Sleep],
then press

OK

.

Language Select

English

Español
Français

CancelOKSelect

Language Select

You have chosen

English as

the language for

your printer.

Cancel

Device Setup

Language English

Sleep 10min

BackOKSelect

2 Press to select Direct Connect Time

among the selection from [Disconnect], [5
min], [10 min], [60 min] and [Unlimited].

3 Press

OK

to confirm.

– If you select [Unlimited], when the

mobile is connected by Direct Mode until

Direct Connect Time

Disconnect

5 min

10 min
60 min

BackOKSelect

selecting [Disconnect] this unit remains in
the Direct Mode.

– If you select [Disconnect], the Direct

Connection will be immediately
terminated.

OK

AirPrint

Enable or disable the AirPrint function.

1 From the Control panel, navigate to

[Home > Setup > AirPrint], then press

OK

.

Setup

Enable Wi-Fi
Device Setup
Direct Connect Time

AirPrint

BackOKSelect

2 Select Sleep Time from [1] minute to [120]

minutes. Use
Time or to decrease the Sleep Time.

3 Press

OK

English

to increase the Sleep

to confirm.

Sleep

Set Sleep Time

UP

10

Down

CancelOKSetting

2 Press to set [Enable] or [Disable].
3 Press

OK

to confirm.

43

AirPrint

Enable

Disable

CancelOKSelect

Continued on next page.

Google Cloud Print™

•

•

You can set the Google Cloud Print™ settings.

Status

Display the connection status or registration
status of the Google Cloud Print™ service.

1 From the Control panel, navigate to [Home

> Setup > Google Cloud Print > Status],
then press

OK

.

Google Cloud Print

Status

Register
Enable/Disable

BackOKSelect

Register to Google Cloud Print™

1 From the Control panel, navigate to [Home

> Setup > Google Cloud Print > Register],
then press

OK

.

Google Cloud Print

Status

Register

Enable/Disable

BackOKSelect

2 The Google Cloud Print™ connection (or

registration) status, unit name, and unit
description will be shown on the Menu
display.

– The

***********

name of your unit.

represents the system

Google Cloud Print

Status

Not configured

Verite55-***********

KODAK VERITE 55

Back

3 Press to return to the previous menu.

The following table shows the Google Cloud Print™ service registration
and connection status of this unit.

Status Unit state

Not configured Unit is not registered to the Google Cloud

Disabled The Google Cloud Print™ service has been

Not connected Unit is not connected to use the Google Cloud

Connected Unit is connected to use the Google Cloud

Disconnected Unit has been disconnected to use the Google

Registration in
progress

Print™ service.
The Google Cloud Print™ feature is not
available.

disabled.
The Google Cloud Print™ feature is not
available. (Unit is registered in the Google
Cloud Print™ service.)

Print™ service.
The Google Cloud Print™ feature is not
available. (Unit is registered in the Google
Cloud Print™ service.)

Print™ service.
The Google Cloud Print™ feature is available.
(Unit is registered in the Google Cloud Print™
service.)

Cloud Print™ service.
The Google Cloud Print™ feature is not
available. (Unit is registered in the Google
Cloud Print™ service.)

Registration is in process to use the Google
Cloud Print™ service.
The Google Cloud Print™ feature is not
available.
Registration should complete.

2 Registration will start and [Registering

printer with Google] will be displayed on
the screen. The unit will print a registration
URL for the Google Cloud Print™
registration.

Note(s) ❏

• Load plain Letter or A4 -size paper.

3 Use your smartphone/tablet or PC to

access that registration URL within 14
minutes and follow its instructions.

4 The mail address you registered will appear

on the Menu display, Register of Google
Cloud Print™ is completed.

5 Press

OK

to [Google Cloud Print] screen.

Note(s) ❏

• Make sure you access the registration
URL within 14 minutes at Step 3. The
registration URL will be unavailable after
15 minutes.

• To cancel the registration process from
the unit, press
message [Cancel Process?] appears,
press

. If [Are you sure to cancel the

print job?] appears, press OK.

. If the confirmation

GCP Registration

Registering printer

with Google.

Cancel

Registration

URL

GCP Registration

During Registration

Waiting for

access to URL

Cancel

GCP Registration

Cloud Printer

Mail address

[e-mail]

Verite55-***********

OK

English

44

Continued on next page.

•

Enable/Disable to Google Cloud Print™

1 From the Control panel, navigate to [Home

> Setup > Google Cloud Print > Enable/
Disable], then press

OK

.

Google Cloud Print

Status
Register

Enable/Disable

BackOKSelect

Restore Factory Default

All of the unit settings will be reset to the factory default.

1 From the Control panel, navigate to

[Home > Setup > Restore Factory Default],
then press

OK

.

Setup

AirPrint
Google Cloud Print
Print Reports

Restore Factory Default

BackOKSelect

2 Press to set [Enable] or [Disable].
3 Press

OK

to confirm.

GCP Enable/Disable

Enable

Disable

CancelOKSelect

The following table shows actions available in the Google Cloud Print™
action.

Select Action

Action

Register Register to Google Cloud Print™
Disable Disable Google Cloud Print™
Enable Enable Google Cloud Print™
Unregister Unregister from Google Cloud Print™

Print Reports

Print out the configuration information.

1 From the Control panel, navigate to

[Home > Setup > Print Reports], then press

OK

.

2 Load plain Letter or A4 -size paper.

Setup

Direct Connect Time
AirPrint
Google Cloud Print

Print Reports

BackOKSelect

2 Press

OK

.

3 Press .

• If you press
restored to factory defaults and the unit
will restart.
If you press
[Setup] screen.

, all settings will be

, the display will return to

Restore Factory Default

Erase ALL content

and settings,

and restore

factory defaults?

CancelOKRestore

Restore Factory Default

Are you sure

you want to restore

factory defaults?

Cancel Restore

3 Press to start printing the

configuration report.

English

Print Reports

Press

to print.

Cancel Print

Configuration

Report

45

Web interface

The Web interface is available to you on all operating systems.
You can access the web interface with an internet browser on your
PC and conduct many different settings to your unit.

You can access the Web interface if the unit is connected to a
network via Wireless Connection.

Note(s) ❏

• Before you start, make sure your PC and the unit are connected
to the same network.

• When the unit is connected to the network, the 
LED lights up.

(network)

Calling the Web interface

For the first time use, you will need to set the Password to get
the entire features on the Web interface. After you have set the
Password, you do not need to set the Password anymore.

1 Start an internet browser on a PC, which is connected to the

network.

Note(s) ❏

Suitable internet browser

• We recommend the following internet browser.

– Windows®: Internet Explorer® (version 8.0 or above)
– Mac: Safari (version 1.3 or above)

Confirming the IP Address

You will need the current IP address of the unit in order to access the
Web interface. To confirm the IP address of the unit, you can check
by selecting [Setup > Network Status > IP Address] on the Control
panel.

Refer to “IP Address” on page 39.

»

Alternatively, you can also verify the IP address by printing out the
Configuration Report.

Refer to “Print Reports” on page 45.

»

Configuration Report

Device Information

Model Name KODAK VERITE 55
Serial Number XXXXXXXXXXXXXX
Firmware Version 1.00.000 (R5787)

Device Statistics Information

Printed Page 10
Scanned Page 12

Supply Information

Black Cartridge

Cartridge Status Installed
Cartridge Type XXL
Ink Level 98 %

Color Cartridge

Cartridge Status Installed
Cartridge Type XXL
Ink Level 99 %

Device Configuration

Language English
Default Paper Size Letter
Default Paper Type Plain
Sleep Time-out 10 min
EWS Access path http://xxx.xxx.xxx.xxx

Network Information

㸸
㸸

EWS Access path

http://xxx.xxx.xxx.xxx

2 Enter the IP address of the unit in the address bar of the browser.

http://xxx.xxx.xxx.xxx

Unit’s IP address

3 The following screen will be displayed.

English

Unit’s IP address

46

Click on the item to check the information or change
its settings.

The printer’s status is displayed here.
[Ready / Busy / Status message]
More details on Status messages and how to correct
problems can be found under "Status messages, LCD
messages and LED behaviors".

Refer to "Status messages, LCD messages and LED

»

behaviors" on page 56.

Changes the display language.
After selecting the language, click on [Accept].
Input "admin" into the "Password" field, then click on [Login]
then, create the Password as you like.

Refer to "Login Password" on page 49.

»

Continued on next page.

Device Status

•

•

•

•

•

•

You can check the status of the unit, such as remaining ink level.

Device Configuration

General Settings

You can change the following items.

• Default paper size/type
If you change this setting, the default paper size/type in Copy
Menu setting are also changed.

• Sleep mode time
You can change the time required before unit enters sleep mode
from [1 min/10 min/20 min/30 min/40 min/50 min/60 min/70
min/80 min/90 min/100 min/110 min/120 min].

Print Reports

You can print out the configuration report.

Factory Reset

You can restore the default settings to the unit.

Note(s) ❏

• The unit will automatically restart after reset to factory settings.
(The Web Interface will be disconnected.)

Enable Wi-Fi

You can turn On / Off the Wireless function.

Note(s) ❏

• Even if the Wireless function is set to Off, when you connect by
Easy Simple Print, the Wireless function will be valid.

• When you have connected the unit to the access point/router, if
you set to disable Wi-Fi, you will not be able to operate from the
Web Interface. If you connect to Wi-Fi again, select the “Enable”
from the “Enable Wi-Fi” of unit menu.

Refer to “Enable Wi-Fi” on page 42.

»

TCP/IP (IPv4) Settings

Network

If necessary, you can confirm or set the state of the network. If you
are not familiar with network management, use the default settings.

Note(s) ❏

• Be careful if you want to assign the IP address manually. If the
IP address you entered is not correct, you will not be able to
connect to the unit. When you cannot connect to the unit after a
configuration change, please reset the unit.

Refer to “Restore Factory Default” on page 45.

»

• When the connection of the unit is changed, the Web interface
will be disconnected. If necessary, reconnect the Web interface.

You can change the IP source / IP address or the like.

Note(s) ❏

• The initial value of the IP Source of Wireless is DHCP.

IPv6 Settings

This unit supports IPv6 in order to support AirPrint.
You can check the information on IPv6.

English

47

Continued on next page.

•

Wireless LAN Settings

•

•

•

• You can change connection settings by setting the SSID / Security /
Password for Wireless Connection.

Proxy Settings

Google Cloud Print™

You can set the Google Cloud Print™ settings.

• Registration and connection status of Google Cloud Print™ will
be shown. More information can be found under "Google Cloud
Print™".

Refer to “Google Cloud Print™” on page 44 for more information.

»

• The printer name and its information are displayed when you are
using Google Cloud Print™.

Action

You can set the following for the Google Cloud Print™ setting.
After you select the Action, click on [Accept].

• You can connect to internet through a proxy server.

Mobile

AirPrint

You can AirPrint Settings.

Refer to “AirPrint” on page 20 for more information.

»

Note(s) ❏

• When you select [Certificate Installation] or [Certificate Request
Generate], you can set the encrypted communication.

AirPrint Configuration

You can turn On/Off the AirPrint function. If set to On, you can print
using the AirPrint.

Select Action

Register to Google Cloud
Print

Disable Cloud Print Disable Google Cloud Print™
Suspend Cloud Print Suspend Google Cloud Print™
Enable Cloud Print Enable Google Cloud Print™
Resume Cloud Print Resume Google Cloud Print™
Unregister from Google Unregister from the Google Cloud Print™
Register Cancel Cancel the Google Cloud Print™

Set XMPP Ping Interval Set the interval time to communicate

*Usually, set the communication interval to 5 minutes (default).
To change this setting, select [Set Interval] in [Select Action] and

choose the communication interval from 1 minute to 10 minutes.

Note(s) ❏

• When you select [Register to Google Cloud Print], then ensure
plain Letter or A4-size paper is loaded.

Register to Google Cloud Print™

registration

with the Google Cloud Print™ service.

Action

Order Supplies

If you would like to purchase consumable material, visit the following
website at

www.kodakverite.com/support

• The printer name (Friendly Name) and its information are
displayed when you are using AirPrint.

English

48

Continued on next page.

Firmware Update

• If the firmware update for this unit is available, the Update
button is displayed. Press it and start to update the firmware.

• When the firmware is the latest version, the Update button is not
displayed.

Login Password

• Once you have logged in to the Web interface with "admin", you
need to change the Password.

Note(s) ❏

• Record the Password in case you forget it.

• If you have forgotten the Password, you can perform [Restore
Factory Default] to reset all settings, including the Password, to
their factory default. After resetting the unit, you can login with
the default Password "admin".

• Passwords may only contain alphanumeric characters, and are
from 1 to 32 characters in length.

• The default Password "admin" provides you with full access to
all setup functions, but can allow access by an unauthorized third
party. It is recommended that you change the Password.

English

49

Service

2

XL

1

XL

3 Remove the cartridges.

Note(s) ❏

• If any problems occur, please see the notifications on the Status
Messenger (Windows®).

Refer to “Status Messenger for Windows®” on page 21.

»

Checking ink levels

Using the Control panel

• From the Control panel, press

OK

.

Using PC

Refer to “Status Messenger for Windows®” on page 21.

»

until [Ink Levels], then press

Changing the ink cartridge

CAUTION C

Use Original Consumable Materials!

• Use only original consumable materials. These are available
from a specialized retailer or through our order service. Other
consumable materials can cause damage to the unit.

Observe Packaging Instructions

• Follow the instructions on the packaging of the consumable
materials.

Black

e

e

e

d

d

d

i

i

i

l

l

l

S

S

S

4 Remove the black and color ink cartridges from the packaging.

5

XL

BLACK

5 Remove the plastic tapes on the black and color ink cartridges

using the red pull tab.

DO NOT TOUCH

Color

S

S

S

ColorBlack

l

l

l

COLOR

e

e

e

d

d

d

i

i

i

5

XL

1 Open the unit by lifting the ink door.

Do Not Open During a Print Job!

• Never open the ink door while printing.

1

2

2 Press the cartridge tab to open the cartridge slot.

• Do not touch the gold contact area on the back or the metal
nozzles on the bottom of the cartridge.

6 Set the color ink cartridge all the way into the slot on the right side.

Color

e

e

e

d

d

d

i

i

i

l

l

l

S

S

S

7 Set the black ink cartridge all the way into the slot on the left side.

Black

e

e

e

d

d

d

i

i

s

s

s

s

e

e

!

!

r

r

P

P

English

50

Continued on next page.

i

l

l

l

S

S

S

8 Push and click the cartridge tab to close the slot until the cover

•

•

•

snaps securely into position.

P

P

u

u

s

s

h

h

h

h

a

a

r

r

d

d

!

!

Fixing a paper jam

Clearing paper jam in the unit

Note(s) ❏

• The parts inside the unit are sensitive. Avoid unnecessarily
touching these parts while clearing jams.

1 Check the paper support or the paper exit tray for jammed paper.
2 Firmly grasp the paper, and then gently pull it out.

9 Close the ink door.

CAUTION C

Ink Cartridge Not Inserted Correctly!

• If the ink door does not close properly, the ink cartridges are
not inserted correctly. Remove the ink cartridges and then
insert them again correctly.

Ordering supplies

If you would like to purchase consumable material, visit the following
website at

Ordering ink cartridges

Black Cartridge 5/5XL/5XXL BLACK

Color Cartridge 5/5XL/5XXL COLOR

Combo Cartridge 5XL BLACK & COLOR

Note(s) ❏

• For page yield information, visit www.kodakverite.com/support

• The cartridges used for printing documents can also be used for

• For best results, use only genuine KODAK VERITE Ink Cartridges.

www.kodakverite.com/support

Item Part Number

printing photos.

Note(s) ❏

• Be careful not to tear the paper while removing it.

3 Press , to restart the rest of the print job. If you want to

cancel the print job, then press

.

Restoring the factory settings

You can restore the default settings on the unit using the web
interface or Control panel.

Refer to “Restore Factory Default” on page 45.

»

Power cycling

Refer to “Troubleshooting” on page 53.

»

If a problem occurs that cannot be corrected with the instructions in
this Extended User Guide, follow the Steps given here.

1 Pull out the AC plug.
2 Wait at least 30 seconds, then connect the AC plug back into the

AC outlet.

3 Follow the instructions on the display and in the error report. If the

problem repeats, visit the following website at

com/support

www.kodakverite.

Using genuine KODAK VERITE Ink Cartridges

KODAK VERITE Ink Cartridges are designed to perform for superior
print quality, and our inks are formulated to work with the unit and
help extend the life of your product.

We recommend that you use only genuine KODAK VERITE Ink
Cartridges sold by Funai Corporation, Inc.

Funai’s warranty does not cover damage caused by non-KODAK
VERITE Ink or Ink Cartridges.

English

Cleaning the printhead nozzles

Using the Control panel

1 From the Control panel, press until [Setup], then press
2 Press to select [Maintenance], then press
3 Press to select [Clean Printhead], then press
4 Load plain Letter or A4 -size paper.

5 Press to start cleaning the printhead.

6 A page prints, forcing ink through the ink cartridge nozzles to clean

them.

7 Print the document again to verify that the print quality has

improved.

51

Continued on next page.

OK

.

OK

.

OK

.

Cleaning the ink cartridge nozzles and contacts

Cleaning the scanner glass

1 Remove the ink cartridge(s).
2 Dampen a clean, lint-free cloth with water, and then place the cloth

on a flat surface.

3 Gently hold the nozzles against the cloth for about 3 seconds, and

then wipe in the direction shown.

4 Using another clean section of the cloth, gently hold the cloth

against the contacts for about 3 seconds, and then wipe in the
direction shown.

5 With another clean section of the cloth, repeat Step 3 and Step 4,

and then let the nozzles and contacts dry completely.

6 Reinsert the ink cartridge(s), and then print the document again.
7 If the print quality does not improve, clean the print nozzles, and

then try printing the document again.

8 Repeat Step 7 up to two more times.
9 If print quality is still not satisfactory, replace the ink cartridge(s).

Preserving the ink cartridges

• Keep new ink cartridges in their packaging until you are ready to
install them.

• Do not remove a ink cartridge from the unit except to replace,
clean, or store it in an airtight container. The cartridges do not
print correctly if left exposed for an extended period of time.

1 Dampen a clean, lint-free cloth with water.
2 Gently wipe the scanner glass clean.

Note(s) ❏

• Make sure all ink or corrective fluid on a document is dry before
placing the document on the scanner glass.

Cleaning the exterior of the unit

1 Make sure that the unit is turned Off and unplugged from the AC

outlet.

SHOCK HAZARD

• To avoid the risk of electric shock, disconnect the AC power
cord from the AC outlet and disconnect all cables to the unit
before proceeding.

2 Remove paper from the paper support and paper exit tray.
3 Dampen a clean, lint-free cloth with water.

CAUTION C

Warning-Potential Damage:

• Do not use household cleaners or detergents, as they may
damage the finish on the unit.

4 Wipe only the outside of the unit, making sure to remove any ink

residue that has accumulated on the paper exit tray.

CAUTION C

Warning-Potential Damage:

• Using a damp cloth to clean the interior may cause damage to
your unit.

5 Make sure the paper support and paper exit tray are dry before

beginning a new print job.

CAUTION C

Refilling ink cartridges

• The warranty does not cover repair of failures or damage
caused by a refilled ink cartridge.

• KODAK does not recommend use of a refilled ink cartridge.

• Refilling a ink cartridge can affect print quality and may cause
damage to the unit.

• For the best results, use KODAK Supplies.

Warning - Drying out of the Printheads:

• Do not move the Ink Cartridge Holder by hand.
If you move the Cartridge Holder to the left the printhead
Cover Caps will not protect the Printheads from Drying out.

English

Periodic maintenance is required

The unit will automatically clean the nozzle itself regularly to keep an
appropriate print quality. This maintenance begins automatically even
when the unit is in sleep mode.

Important Notice Regarding Printheads

This unit automatically protects the printhead (caps) on each ink
cartridge in order to prevent the printheads from drying. This function
is only performed in Power-Off mode when pressing
button. Do not Unplug the AC power cord from the AC outlet to
shut down the unit or move the ink cartridge access holder after the
unit was shut down. Failure to do so may result in Clogging of the
Printhead Nozzles.

52

(Power)

Troubleshooting

You can correct most problems by yourself. If you need additional help, the KODAK Solutions Center offers the most up-to-date driver, manuals,
the latest FAQs and troubleshooting tips. Visit our website at

Setup troubleshooting

Incorrect language appears on the display Change the language selection during initial setup

– During initial setup, and every time you reset the unit to factory default settings, you will be

– Factory default

»

Select a different language after initial setup

In case the wrong language was set during initial setup, you can still change the language
settings of the unit.

»

Power button is not lit

Software did not install

• Press (Power)

Make sure the unit is on by pressing

• Disconnect and reconnect the AC plug

1 Disconnect the AC plug from the AC outlet for 30 sec.
2 Connect the AC plug to an AC outlet that other electrical

3 If the (Power) LED is not On, press (Power).

If you encountered problems while installing, or if the unit does not appear in the list in the
printers folder or as the unit option when sending a print job, you can try uninstalling and
reinstalling the software.

Make sure your operating system is supported

The following operating systems are supported:

www.kodakverite.com/support

asked to select a language.

Refer to “Restore Factory Default” on page 45.

Refer to “Language” on page 43.

(Power).

devices have been using or check this outlet with another device.

Microsoft® Windows®

OS Version Processor Browser USB port

Windows® 8.1 Windows® Server 2012

Windows® 8 Windows® Server 2008
Windows® 7 Windows® Server 2003

Windows® Vista

Apple Mac OS

OS Version Processor Browser USB port

OS X v10.9

(Mavericks)

OS X v10.8

(Mountain Lion)

– Linux Debian 6.0, Ubuntu 12.04 LTS

Check that your computer meets the minimum system requirements listed on the printer box.

• Check the USB connection

OS X v10.7

(Lion)

Mac OS X v10.6

(Snow Leopard)

32-bit (x86) or

64-bit (x64)

Intel® Core™

Processor

Internet

Explorer®

Safari

USB 2.0

High Speed

or

Full Speed

USB 2.0

High Speed

or

Full Speed

1 Check the USB cable for any obvious damage. If the cable is damaged, use a new one.
2 Firmly plug the square end of the USB cable into the back of the unit.
3 Firmly plug the rectangular end of the USB cable into the USB port of your PC.

The USB port is marked with the USB symbol.

• Reconnect the power supply

1 Press (Power) to turn the unit Off.
2 Disconnect the AC plug from the AC outlet.
3 Connect the AC plug to the AC outlet.

4 Press (Power) to turn the unit On.

English

53

Continued on next page.

Software did not install (continued)

Page does not print

• Temporarily disable security programs in Windows®

1 Close all open programs.
2 Disable any security programs.
3 Double-click the downloaded installer file to extract it.
4 Follow the instructions on the computer screen to install the software.
5 When the installation is completed, enable the security software again.

• Check messages

If an error message appears, then resolve the error before trying to print again.

• Check power

If the
connected to the unit and the AC plug is connected to a known working AC outlet that other
electrical devices have been using or check this outlet with another device.

• Remove and then reload paper

• Check ink

Check the ink levels, and then install new ink cartridges if necessary.

• Check cartridges

(Power) LED is not On, then make sure that the AC power cord is properly

1 Remove the ink cartridges.
2 Make sure the sticker and tape have been removed.
3 Reinsert the cartridges.

• Check printer default and pause settings

Using Windows® 7

1 From the Windows

®

start menu, click Devices and Printers.

2 Either double-click the icon for your unit or right-click the icon for your unit and select

See what’s printing to open the print queue.

3 On the menu, make sure there are no check marks next to Pause Printing or Use Printer

Offline.

4 If you made any changes, try to print again.

If a check mark does not appear next to Set As Default Printer, then you must select the unit for
each file that you want to print.

• Disconnect and reconnect power supply

Print unexpectedly or it prints garbage data.

1 Press (Power) to turn the unit Off.
2 Disconnect the AC plug from the AC outlet for 30 sec.
3 Connect the AC plug to the AC outlet.
4 Press (Power) to turn the unit On.

• Remove and reinstall the software

If you encountered problems while installing, or if the unit does not appear in the printers
folder or as a printer option when sending a print job, then try uninstalling and reinstalling the
software.

• Make sure that the USB cable is not too long.

• Make sure that the USB cable is not damaged or broken.

• If you are using a USB interface-switching device, remove it. Connect your computer directly

to your unit, and then try again.

• Make sure that you have chosen the correct printer driver to [Set as Default Printer].

• Make sure that this unit is not connected to the same port that is also connected to a storage

device or scanner device. Remove all other devices and connect only this unit (printer) to this
port.

English

54

Continued on next page.

Solving the power problems

•

•

•

•

•

•

Removing and reinstalling the software

Enabling the USB port in Windows®

• The unit and your PC cannot exchange data.

• Make sure the power supply is attached correctly to the unit

1 Press (Power) to turn the unit Off.
2 Disconnect the AC plug from the AC outlet.
3 Wait 30 seconds and then connect the AC plug to the AC outlet.
4 Press (Power) to turn the unit On.

• Make sure the unit is not in sleep mode

If the power light is blinking On and Off slowly, then the unit is in sleep mode.

1 Disconnect the AC plug from the AC outlet.
2 Wait 30 seconds and then connect the AC plug to the AC outlet.

3 Press (Power) to turn the unit On.

If the unit is not working properly, or if a communication error message appears when you try to
use the unit, then you may need to remove and reinstall the software.

Using Windows® 7

1 Click [Start] button.
2 Click All Programs, and then select the printer software folder “KODAK VERITE >

KODAK VERITE 50 Series” from the list.

3 Select Uninstall.
4 Follow the instructions on your PC screen to remove the printer software.
5 Restart the PC before reinstalling the printer software.
6 Click Cancel on all New Hardware Found screens.
7 From your computer go to www.kodakverite.com/support and select the "Download"

Tab.

Refer to “Before you install the printer driver” on page 15.

»

• To confirm that the USB port is enabled on your PC:

Using Windows® 7

1 Click [Start] button.
2 Click Control panel > Hardware and Sound.
3 Under Devices and Printers, click Device Manager.
4 Double-click Universal Serial Bus Controller.

If USB Host Controller and USB Root Hub are listed, then the USB port is enabled. For more
information, see your PC documentation.

Status Messenger Error Message appears

Refer to “Check print status from your PC” on page 21 and “Status

»

messages, LCD message and LED behaviors” on page 56.

Paper handling

Refer to “Print media” on page 23 and “Status messages, LCD

»

messages and LED behaviors” on page 56 (status message: Paper
Jam).

Pages are printed, but there are problems with:

– Print quality

Refer to “Improving the print quality” on page 61.

»

Network problems

If you need additional help, the Funai Solutions Center offers the most­up-to-date driver, manuals, the latest FAQs and troubleshooting tips.
Visit our website at

English

www.kodakverite.com/support

Alignment problems

If the following message is displayed on the LCD after running
alignment, make sure whether the alignment pattern is a printing
failure or not.

Cartridge Setup

Test scan failed.

Place test print in

upper left corner of

scanner, and close lid.

Back Scan

Refer to “Cartridge Setup” on page 37.

»

Check the ink cartridges.

1 Open the Ink Door, then remove and reinstall the Ink Cartridges.
2 Load a plain and unmarked A4- or Letter-size paper. The unit

will read any markings on used paper, which could cause the
alignment error message to reappear.

3 Close the Ink Door.
4 Press

55

OK

to clear the message.

Continued on next page.

Status messages, LCD messages and LED behaviors

•

The Status information will report problems with the unit.
Take the proper action by referring to the following table.

Refer to “Status information” on page 21.

»

Wireless direct LED — indicated by

Error LED — indicated by

Power LED — indicated by

Network LED — indicated by

Status messages LCD messages LED behaviors Unit status or possible causes Refer to

Communication failed on the unit.

Communication failure

Insert Paper

Ready

(No Error message)

Insert Paper

Please insert paper

OK

and press

CancelOKStart

.

blinks as pattern 1

and

lights up

Insert Paper.

LED lighting patterns

Blinking 1 Blinking slowly
Blinking 2
Blinking 3
Blinking 4

Lights up very rapidly
Lights up slowly No light for 3 sec.
Lights up for 3 sec.

No light for 1 sec.
Blinking 5 Blinking rapidly
Blinking 6 Blinking very rapidly
Blinking 7

Blinking 8

Blinking 9

Blinking 10
Blinking 11

Lights up rapidly
Blinking very rapidly x 2 times

than 1 sec.
Blinking very rapidly x 3 times

than 2 sec.
Blinking very rapidly x 4 times

Lights up slowly No light for more than 1 sec.

No light for 5 sec.

– Check the AC plug is connected to the AC

outlet properly, the unit is turned On, or the
connection environment (USB, Wireless) to the
unit. Then follow the procedures by showing the
help text on your connected unit.

• If this error occurs occasionally, refer the
latest troubleshooting to visit our website at

www.kodakverite.com/support

• If you cannot solve the problem, disconnect
the AC plug and contact an authorized service
center.

– Check the paper support.

• Set specified paper in the paper support, and
then press OK.

No light for more than 3 sec.

No light for more

No light for more

No light for 2 sec.

“Insert paper into the paper
support”
on page 23.

Paper Jam

Please confirm the LCD
display of the device.

Paper Jam

Clear jam and

OK

.

press

Cartridge Setup

Please check
ink cartridge lock.
And retry by

Cartridge Error

ink cartridge lock.
And retry by

OK

Please check

OK

A paper jam has occurred inside of the unit.

– Firmly grasp the paper, and then gently pull it

and light up

OK

out.

OK

Press

, to restart the rest of the print job.

• If you want to cancel the print job, then press
.

“Clearing paper jam in
the unit”
on page 51.

An ink cartridge is not installed correctly.

– If the packaging paper is stuck in the ink door,

remove it.

.

OK

blinks as pattern 4

and lights up

– Reinstall the cartridge, then close the lid

completely.

• Confirm the ink cartridge is correctly installed,

then press OK.

"Unpack" on page 10.
"Install ink cartridges" on

page 11.
"Changing the ink cartridge"

on page 50.

.

OK

English

56

Continued on next page.

Status messages LCD messages LED behaviors Unit status or possible causes Refer to

A paper jam has occurred inside of the unit.

– Firmly grasp the paper, and then gently pull

Paper Jam M:
Reboot by AC plug out

Paper Jam M

Paper Jam or

feed Roller Stall.

Clear Jam

and reboot

by AC plug out.

and

blink as pattern 1

it out. Pull out the AC plug. Wait at least 30
seconds, then connect the AC plug back into the
AC socket.

• If this error occurs occasionally, refer the

latest troubleshooting to visit our website at

www.kodakverite.com/support

“Clearing paper jam in
the unit”
on page 51.

“Power cycling”
on page 51.

• If you cannot solve the problem, disconnect

the AC plug and contact an authorized service
center.

Pull out the AC plug.

– Check that the Ink Cartridges have no obstacles

Cartridge/Paper Jam:
Reboot by AC plug out

Cartridge/Paper Jam

Please clear

the paper jam.

Reboot

by AC plug out.

and

blink as pattern 1

and clear pathways.
Connect the AC plug to the AC outlet.

• If this error occurs occasionally, refer the

latest troubleshooting to visit our website at

www.kodakverite.com/support

• If you cannot solve the problem, disconnect

“Clearing paper jam in
the unit”
on page 51.

“Power cycling”
on page 51.

the AC plug and contact an authorized service
center.

Control panel Open

– Close the panel (Ink Door).

Printer Ink door open.

Ink Door Open

Please close

ink door.

and light up

Black Ink is invalid.

Color Ink is invalid.

Both black and color Ink
are invalid.

Black Ink empty

Color Ink empty

Incorrect Ink

Black ink
is invalid.

Check the ink.

Incorrect Ink

Color ink
is invalid.

Check the ink.

Incorrect Inks

Both black and

color ink are

invalid.

Black Ink Empty

Black Color

Empty

Black

Empty

Empty

Color Ink Empty

Color

Empty

blinks as pattern 4

and

lights up

blinks as pattern 4

and

lights up

Soiled or unsupported ink cartridge has been
inserted.

– Clean the surface of the nozzles and contacts on

the Ink cartridges with a dampened soft cloth
then let them dry before reinserting cartridge.

– Replace the current Ink cartridge(s) with an

authorized Ink cartridge(s).

• If this error occurs occasionally, try to replace

the current Ink cartridge(s) with a new Ink
cartridge(s).

The ink is empty in the ink cartridge.

– Replace with a new Ink cartridge(s).

• Order a new Ink cartridge from our website at

www.kodakverite.com/support

“Cleaning the ink cartridge
nozzles and contacts”
on page 52.

“Changing the ink cartridge”
on page 50.

“Changing the ink cartridge”
on page 50.

Both Inks empty

English

Both Inks Empty

Black

Color

EmptyEmpty

57

Continued on next page.

Status messages LCD messages LED behaviors Unit status or possible causes Refer to

No ink detected.

–

No Ink detected

No Ink detected

Please insert

ink cartridge.

blinks as pattern 4

and

lights up

Remove and reinstall the Ink cartridges.

– Make sure the Ink cartridges are inserted

correctly.

– Clean the surface of the nozzles and contacts on

the Ink cartridges with a dampened soft cloth

“Changing the ink cartridge”
on page 50.

“Cleaning the ink cartridge
nozzles and contacts”
on page 52.

then let them dry before reinserting cartridge.

Black ink cartridge error.

–

Black Ink Error

Black Ink Error

Please replace

the black ink.

blinks as pattern 4

and

lights up

Clean the surface of the nozzles and contacts on
the Ink cartridges with a dampened soft cloth
then let them dry before reinserting cartridge.

– Replace the current Ink cartridge with an

authorized Ink cartridge.

• If this error occurs occasionally, try to replace

“Cleaning the ink cartridge
nozzles and contacts”
on page 52.

“Changing the ink cartridge”
on page 50.

the current Ink cartridge with a new Ink
cartridge.

Color ink cartridge error.

–

Color Ink Error

Color Ink Error

Please replace

the color ink.

blinks as pattern 4

and

lights up

Clean the surface of the nozzles and contacts on
the Ink cartridges with a dampened soft cloth
then let them dry before reinserting cartridge.

– Replace the current Ink cartridge with an

authorized Ink cartridge.

• If this error occurs occasionally, try to replace

“Cleaning the ink cartridge
nozzles and contacts”
on page 52.

“Changing the ink cartridge”
on page 50.

the current Ink cartridge with a new Ink
cartridge.

Ink cartridges error.

–

Both Inks Error

Both Inks Error

Please replace

the both inks.

blinks as pattern 4

and

lights up

Clean the surface of the nozzles and contacts on
the Ink cartridges with a dampened soft cloth
then let them dry before reinserting cartridge.

– Replace the current Ink cartridges with

authorized Ink cartridges.

• If this error occurs occasionally, try to replace

“Cleaning the ink cartridge
nozzles and contacts”
on page 52.

“Changing the ink cartridge”
on page 50.

the current Ink cartridges with new Ink
cartridges.

Ink cartridges error.

–

Defective Cartridge

Ink Error

Defective cartridge.

Check the ink.

blinks as pattern 4

and

lights up

Clean the surface of the nozzles and contacts on
the Ink cartridges with a dampened soft cloth
then let them dry before reinserting cartridge.

– Replace the current Ink cartridges with

authorized Ink cartridges.

• If this error occurs occasionally, try to replace

“Cleaning the ink cartridge
nozzles and contacts”
on page 52.

“Changing the ink cartridge”
on page 50.

the current Ink cartridges with new Ink
cartridges.

Black ink is empty in the ink cartridge.

You get good printed results with Color mode

–

when you make prints in this condition, and the
warning indication continues until you press

OK

.

• If you want to use both Ink cartridges, please

Black Ink Empty

Black Ink Empty

Printing in

color-only mode.

blinks as pattern 1
and

blinks as

pattern 3

OK

replace with a new Black Ink cartridge.

Color ink is empty in the ink cartridge.

You get good printed results with Mono mode

–

when you make prints in this condition and the
warning indication continues until you press

OK

.

• If you want to use both Ink cartridges, please

Color Ink Empty

Color Ink Empty

Printing in

mono-only mode.

blinks as pattern 1
and

blinks as

pattern 3

OK

replace with a new Color Ink cartridge.

English

58

Continued on next page.

Status messages LCD messages LED behaviors Unit status or possible causes Refer to

Black ink is not inserted.

– You get good printed results with Color mode

when you make prints in this condition, and the
warning indication continues until you press

OK

.

• If you want to use both Ink cartridges, please

The black ink cartridge
is not detected.

Black Ink missing

Printing in

color-only mode.

blinks as pattern 1
and

blinks as

pattern 3

OK

replace with a new Black Ink cartridge.

Color ink is not inserted.

– You get good printed results with Mono mode

when you make prints in this condition, and the
warning indication continues until you press

OK

.

• If you want to use both Ink cartridges, please

The color ink cartridge
is not detected.

Color Ink missing

Printing in

mono-only mode.

blinks as pattern 1
and

blinks as

pattern 3

OK

replace with a new Color Ink cartridge.

Black ink is empty in the ink cartridge.

– You get good printed results with Color mode in

this condition.

• If you want to use both Ink cartridges, please

cancel the print job then press and
replace with a new Black Ink cartridge.

“Changing the ink cartridge”
on page 50.

Black Ink Empty

Print

Printing...

■■■■■■□□

Black Ink Empty

Cancel

blinks as pattern 1

Color Ink Empty

The black ink cartridge
is not detected.

The color ink cartridge
is not detected.

The black ink level is
low.

The color ink level is
low.

Print

Printing...

■■■■■■□□

Color Ink Empty

Cancel

Print

Printing...

■■■■■■□□

Black Ink missing

Cancel

Print

Printing...

■■■■■■□□

Color Ink missing

Cancel

Print

Printing...

■■■■■■□□

Black Ink Low

Cancel

Print

Printing...

■■■■■■□□

Color Ink Low

Cancel

blinks as pattern 1

blinks as pattern 1

blinks as pattern 1

blinks as pattern 1

blinks as pattern 1

Color ink is empty in the ink cartridge.

– You get good printed results with Mono mode

in this condition.

• If you want to use both Ink cartridges, please

cancel the print job then press and
replace with a new Color Ink cartridge.

Black ink is not inserted.

– You get good printed results with Color mode in

this condition.

• If you want to use both Ink cartridges, please

cancel the print job then press and
replace with a new Black Ink cartridge.

Color ink is not inserted.

– You get good printed results with Mono mode

in this condition.

• If you want to use both Ink cartridges, please

cancel the print job then press and
replace with a new Color Ink cartridge.

Black ink level is low.

– You should prepare the new Ink cartridge.

• Order a new Ink cartridge from our website at

www.kodakverite.com/support

Color ink level is low.

– You should prepare the new Ink cartridge.

• Order a new Ink cartridge from our website at

www.kodakverite.com/support

“Changing the ink cartridge”
on page 50.

Both ink levels are low.

English

Printing...

■■■■■■□□

Cancel

Print

Inks Low

blinks as pattern 1

Both inks are low in the ink cartridges.

– You should prepare the new Ink cartridges.

• Order new Ink cartridges from our website at

www.kodakverite.com/support

59

Continued on next page.

Status messages LCD messages LED behaviors Unit status or possible causes Refer to

Printer Memory Full

Printer Memory Full
(Recoverable)

Memory Full

Print failure.

Adjust the print

settings to reduce the

quality of the print job.

Skip

Memory Full

Print failure.

You can print

only one copy.

Skip

and light up

blinks as pattern 1

and

light up

Memory of the unit is full.

You cannot print with this print setting.

–
– Please change the print setting, and try again.

(Resolution, size or number of copies)

Memory of the unit is full.

–

You cannot print the multiple copies with this
print setting.

– Please change the print setting, and try again.

(Resolution, Size or Number of copies)

“ Confirming Printing
Preferences for Windows®

-Layout” on page 25
or “Confirming Print Settings
for Mac -Layout”
on page 28.

“ Confirming
Preferences for Windows®

-Quality” on page 26
or “Confirming Print Settings
for Mac -Quality and media”
on page 28.

Pull out the AC plug.

–

Wait at least 30 seconds, then connect the AC
plug back into the socket.

• If this error occurs occasionally, refer the

latest troubleshooting to visit our website at

www.kodakverite.com/support

“Power cycling”
on page 51.

Scanner Error:
Reboot by AC plug out

Scanner Error

Please check

Scanner Unit

and reboot

by AC plug out.

and

blink as pattern 1

• If you cannot solve the problem, disconnect

the AC plug and contact an authorized service
center.

Pull out the AC plug.

–

Wait at least 30 seconds, then connect the AC
plug back into the socket.

• If this error occurs occasionally, refer the

latest troubleshooting to visit our website at

www.kodakverite.com/support

“Power cycling”
on page 51.

Memory Error:
Reboot

by AC plug out

Memory Error

Reboot

by AC plug out.

and

blink as pattern 1

• If you cannot solve the problem, disconnect

the AC plug and contact an authorized service
center.

Please confirm the Menu display of the device.
Please confirm the LCD
display of the device.

<Processing display>

blinks as pattern 5

Print jobs cannot start while running alignment.

–

Run the alignment or run cancel operation on the
device.

Pull out the AC plug.

Wait at least 30 seconds, then connect the AC

–

plug back into the socket.

• If this error occurs occasionally, refer the
latest troubleshooting to visit our website at

www.kodakverite.com/support

• If you cannot solve the problem, disconnect
the AC plug and contact an authorized service
center.

“Power cycling”
on page 51.

Wi-Fi Module Error:
Reboot

by AC plug out

NFC Module Error:
Reboot

by AC plug out

Wi-Fi Module Error

Reboot

by AC plug out.

NFC Module Error

Reboot

by AC plug out.

and

blink as pattern 1

and

blink as pattern 1

Printing

English

60

Improving the print quality

If printout is like below, please try the suggestions in order.

Examples of poor image quality Suggestions

Faint

1 Using genuine ink cartridges

Refer to “Ordering ink cartridges” on page 51.

»

2 Checking ink levels

• Refer to “Checking ink levels” on page 50 or “Status Monitor
Center for Windows®” on page 22.

3 Cleaning the ink cartridge nozzles

Refer to “Clean Printhead” on page 37.

»

4 Aligning ink cartridges

Refer to “Cartridge Setup” on page 37.

»

5 Wiping the ink cartridge nozzles and contacts

Refer to “Wiping the ink cartridge nozzles and contacts” on page 52.

»

6 Cleaning the scanner glass (Copy function)

Refer to “Cleaning the scanner glass” on page 52.

»

7 Cleaning the exterior of the unit

Refer to “Cleaning the exterior of the unit” on page 52.

»

8 Please change to the higher quality mode. (Faint or white lines)

Refer to “ Confirming Printing Preferences for Windows® -Quality” on

»

page 26 or “Confirming Print Settings for Mac -Quality and media”
on page 28.

Faded colors / Incorrect color

White lines across on the page

No printing results on the page

English

61

Appendix

•

Specifications

For more product specifications, see the Product Data Sheet at

www.kodakverite.com/support

Technical Data

Dimensions (width x depth x height)
Maximum dimensions (width x depth x height)
Weight

Power requirements 100 - 127 V AC (-10%/+5%), 50/60 Hz (+/- 3 Hz)
Operating temperature 41 °F (5 °C) to 95 °F (35 °C)
Operating humidity 10 – 60 % (no condensation)

Print technology Thermal inkjet
Standard printer language(s)
Print resolution (best) Up to 4800 x 1200(black)

Copy resolution
(Black & Color/Text and Photo)

Scanner type Flatbed scanner
Scan resolution (optical)

(Software enhanced)
Maximum scan area

Supported file types BMP, GIF, JPEG, TIF, PDF etc.

Input capacity Plain paper (20 lb. or 75 g/m
Output capacity Plain paper (20 lb. or 75 g/m
Size Letter, Legal, JIS B5, A4, Executive, A5, Statement, A6, 3x5 in., 4x6 in., 5x7 in.,

Weight Plain paper: 17 -24 lb. (64 - 90 g/m

Connection type USB 2.0 (High Speed)

Supported operating systems
Direct print support capability Wireless Direct Printing

Acoustic values based on ISO9296 Visit our website at www.kodakverite.com/support

17.7 x 10.7 x 6.0 inches (450.4 x 272.5 x 153 mm)

17.7 x 18.5 x 10.3 inches (450.4 x 470.6 x 262 mm)

8.0 lb. (3.65 kg)

Printer

GDI

Up to 4800 x 1200(color)

Copier

Scan up to 600 x 600 dpi
Print up to 4800 x 1200 dpi(black)
Print up to 4800 x 1200 dpi(color)

Scanner

Up to 1200 x 1200 dpi
Up to 19,200 x 19,200 dpi

8.5 x 11.7 inches (216 x 297 mm)

Paper

Hagaki, 3.5x5 in.(L), 10 Envelope, DL Envelope, C5 Envelope

PC-Network Connection

Wi-Fi IEEE 802.11 b/g/n
Visit our website at www.kodakverite.com/support

Standards

2

): Up to 60

2

): Up to 25

2

)

• Technical specifications subject to change without notice.

Note about recycling

• This unit’s packaging materials are recyclable and can
be reused. Please dispose of any materials in accordance
with your local recycling regulations.

• For product recycling information, please visit -

www.kodakverite.com/support click on

Material safety data sheets (MSDS)

To obtain Material Safety Data Sheets (MSDS) for supplies
containing chemical substances (e.g. ink), visit our website at

www.kodakverite.com/support

JF120UB

★★★★★

English

Notes on statutory limitations, data protection and legal
validity

The reproduction of certain documents (e.g. by scanning, printing,
copying) is prohibited in many countries. The list of such documents
below is not intended to be complete, it only offers a general
overview. In case of doubt, consult your legal advisor.

– Passports (personal identification)
– Entrance and exit visa papers (immigration papers)
– Military service documents
– Bank notes, travel checks, payment orders
– Postage stamps, tax stamps (stamped or unstamped)
– Loan papers, certificates of deposit, bonds
– Documents protected by copyright

Neither Funai nor its affiliates shall be liable to the purchaser of this product or third par­ties for damages, losses, costs, or expenses incurred by the purchaser or third parties as
a result of accident, misuse, or abuse of this product or unauthorized modifications, re­pairs, or alterations to this product, or failure to strictly comply with Funai operating and
maintenance instructions. Funai shall not be liable for any damages or problems arising
from the use of any options or any consumable materials other than those designated
as original products or approved products. Funai shall not be held liable for any damage
resulting from electromagnetic interference that occurs from the use of any interface
cables other than those designated as products.

62

Limited Warranty

Wireless Printer

FUNAI warrants this Product to be free from malfunctions and defects in both materials and workmanship for one year from the date of
purchase.

LIMITS AND EXCLUSIONS:

Warranty service is only available from within the country where the Product was originally purchased. You may be required to ship
Product, at your expense, to the authorized service facility for the country where the Product was purchased.

Funai will repair or replace this Product if it fails to function properly during the warranty period, subject to any conditions and/or limi­tations stated herein. Warranty service will include all labor as well as any necessary adjustments and/or replacement parts. If Funai is
unable to repair or replace a Product, Funai will, at its option, refund the purchase price paid for the Product provided the Product has
been returned to Funai along with proof of the purchase price paid. Repair, replacement, or refund of the purchase price are the sole
remedies under this warranty.

If replacement parts are used in making repairs, those parts may be remanufactured or may contain remanufactured materials. If it
is necessary to replace the entire Product, it may be replaced with a remanufactured Product. Remanufactured Products, parts and
materials are warranted for the remaining warranty term of the original Product, or 90 days after the date of the repair or replace­ment, whichever is longer.

THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER
PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE
UNDER THIS WARRANTY.

This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was at-

tempted by an unauthorized service center.
This warranty only covers failures due to defects in material or workmanship which occur during normal use. It does not cover dam-

age which occurs in shipment, or failures which are caused by repairs, alterations or products not supplied by FUNAI, or damage, which
results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use
such as hotel, rental or office use of this product, or damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES, ANY COSMETIC PARTS,
COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS. FUNAI AND ITS REPRESENTATIVES OR AGENTS
SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT
OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE
IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF
FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.

IMPORTANT:

Outside the United States and Canada

In countries other than the United States and Canada, the terms and conditions of this warranty may be different. Unless a specific Funai
warranty is communicated to the purchaser in writing by a Funai company, no warranty or liability exists beyond any minimum require­ments imposed by law, even though defect, damage, or loss may be by negligence or other act.

AT TE N TI ON : FUNAI RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE.

WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:

To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original packaging or
packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI will not reimburse you for any
service done by unauthorized service providers without prior written approval.

To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please contact us at:

Some states or jurisdictions do not allow exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you. Some states or jurisdictions do not allow limitations on how
long an implied warranty lasts, so the above limitation may not apply to you.
This warranty gives you specific rights, and you may have other rights which vary from state to state or by jurisdiction.

FUNAI SERVICE CORPORATION

www.kodakverite.com/support

© 2015 Funai Electric Co., Ltd. All rights reser ved.
The Kodak trademark and trade dress are used under license from Eastman Kodak Company.

English

2425 Spiegel Drive, Groveport, OH 43125

63

The Kodak trademark and trade dress are used under license from Eastman Kodak Company.
www.kodakverite.com

© 2015 Funai Electric Co., Ltd. All rights reserved.