Kodak UPB10011 Owner Manual

KODAK Smart Air Puriier

AP550 DUAL FAN

User Manual

The features described in this User Manual
are subject to modiications without prior notice.

AP550_User Manual_V1.8

P.1

TABLE OF CONTENTS

1. IMPORTANT SAFETY INSTRUCTIONS

2. PRODUCT PARTS OVERVIEW

3. CONTROL PANEL

4. DISPLAY ICONS

5. OPERATION INSTRUCTIONS

6. MOBILE APP DISPLAY ICONS

4

10

11

12

14

24

8. GRANT ACCESS

9. TROUBLESHOOTING

10. SPECIFICATIONS

11. EXCLUSION FROM COVERAGE

12. FCC, IC AND CE REGULATIONS

13. WARNING

52

54

56

57

59

61

7. OPERATION INSTRUCTIONS

(MOBILE APP)

26

14. EC DECLARATION OF CONFORMITY

63

P.2 P.3

1. IMPORTANT SAFETY INSTRUCTIONS

WARNING:

Danger

• Do not let water or any other liquid or lammable de­BEFORE USING THE KODAK SMART AIR PURIFIER,
PLEASE READ THROUGH ALL THE INSTRUCTIONS
AND CAUTIONARY MARKINGS IN THE MANUAL AND
ON THE AIR PURIFIER. PLEASE KEEP IT FOR FUTURE
REFERENCE.

This appliance can be used by children aged from 8+ years
old and people with reduced physical, sensory or mental
abilities or lack of experience and knowledge, only if they are
under supervision or have been given instructions concern­ing the use of the appliance in a safe way and understanding
the hazards involved. Children shall not play with the appli­ance. Cleaning and user maintenance shall not be undertak-

tergent enter the air puriier to avoid electric shock
and/or a ire hazard.

• Do not clean the WHOLE air puriier with water, any

other liquid, or a (lammable) detergent to avoid
electric shock and/or a ire hazard.

• Do not spray any lammable materials such as insec-

ticides or fragrance around the air puriier.

Warning

en by children without supervision.

Please place at least 30cm away from any metal surfaces or
objects.

Any metal
surface or

Recommend >30cm

objects

• Check if the voltage indicated on the air puriier corre-

sponds to the local power voltage before you connect
the appliance.

• Do not use the air puriier if the plug, the power cord,

or the appliance itself is damaged.

• Do not block the air inlet and outlet, e.g. by placing

items on the air outlet or in front of the air inlet.

• Make sure that foreign objects do not fall into the air

puriier through the air outlet.

P.4 P.5

Caution

• Leave at least 30 cm free space all around the device
(back,front & sides) and at least 40cm above the air
puriier.

• This air puriier is not a substitute for proper ventila­tion, regular vacuum cleaning, or use of an extractor
hood or fan while cooking.

• If the power socket used to power the air puriier has
poor connections, the plug of the air puriier becomes
hot. Make sure that you plug the air puriier into a
properly connected power socket.

• Avoid knocking against the air puriier (the air inlet and
outlet in particular) with hard objects.

• Always lift or move the air puriier by the handle on top
of the device.

• Do not insert your ingers or objects into the air outlet
or the air inlet to prevent physical injury or malfunc­tioning of the air puriier.

• Do not use this air puriier when you have used indoor
smoke-type insect repellents or in places with oily resi­dues, burning incense, or chemical fumes.

• Always place and use the air puriier on a dry, stable,
level, and horizontal surface.

• Do not place anything on top of the air puriier.

• Do not sit or stand on the air puriier. Sitting or stand­ing on the appliance may lead to potential injury.

• Make sure the reusable ilter, front cover and back cov­er are properly installed before you switch on the air
puriier.

• Only use the original reusable ilter specially intended

• Do not use the air puriier near gas appliances, heating
devices or ireplaces.

• Always unplug the air puriier after use and before
cleaning or carrying out other maintenance.

• Do not use the air puriier in a room with major tem­perature changes, as this may cause condensation
inside the air puriier.

• To prevent interference, place the air puriier at least
2 meters away from other electrical appliances that

for this KODAK Smart Air Puriier. Do not use any other
ilters or add any extra ilters in the device.

P.6 P.7

use airborne radio waves such as TVs, radios, and ra­dio-controlled clocks.

• The air puriier is only intended for household use

• Suitable for dry location ONLY. Do not use outdoors or

under normal operating conditions.

• If you need to move the air puriier, disconnect it from
the power supply irst.

• When moving the air puriier, do it slowly and do not
push it rapidly.

• Do not move the air puriier by pulling its power cord.

• This KODAK Smart Air Puriier is not intended for use by
people (including children) with reduced physical, sen­sory or reasoning capabilities, or lack of experience and

on wet surfaces and do not expose to water or rain.

• Do not handle any part of the plug or device with wet
hands.

• Do not operate any device with a damaged cord or
plug. Discard the device or return to an authorized ser­vice facility for examination and/or repair. If the supply
cord is damaged it must be replaced by oicial chan­nel, its service agent or similarly qualiied person in
order to avoid a hazard.

• If the device is not working as it should, has received

knowledge, unless they are under supervision or have
been given instructions concerning the use of the de­vice by a person responsible for their safety.

• Ensure the device is fully assembled in line with the
instructions before use.

• Do not allow to be used as a toy. Close attention is nec­essary when used by or near children. Children should
be supervised to ensure that they do not play with the
device.

• Use only as described in this KODAK Smart Air Puriier

a sharp blow, has been dropped, damaged, left out­doors, or dropped into water, do not use it and con­tact the Kodak Smart Home Customer Support team.

• Do not stretch the cord or place it under any strain.
Keep the cord away from any heated surfaces.

• Do not run the cord under carpeting. Do not cover the
cord with rugs, runners or similar coverings. Do not
route the cord under furniture or any appliances. Place
the cord away from any traic area and where it will
not be tripped over.

User Manual. Do not carry out any maintenance other
than the one shown in this User Manual, or advise
given by the Kodak Smart Home Customer Support

• Do not use any cleaning agents or lubricants on this
device. Unplug it before cleaning or carrying out any
maintenance .

team.

P.8 P.9

2. PRODUCT PARTS OVERVIEW 3. CONTROL PANEL

Screen Button

Reusable and
Washable Filter

Power On/O

Button

Front

Cover

Back
Cover

P.10 P.11

4. DISPLAY ICONS

PM2.5 Reading

Air Quality Rings

Mode Display

29

˚C

89

Good

%

000-050

Temperature

Reading

Mode Display

˚C

89

29

˚C

29

• Capital letter “A” indicates that the air puriier is in
Auto mode.

%

89

%

Humidity Reading

29

29

˚C

˚C

89

89

Moderate

%

051-100

Unhealthy

%

101-300

Hazardous

• “No WiFi connection icon” indicates that the air

29

29

˚C

˚C

89

89

puriier cannot connect to the WiFi (router)

%

• “No Internet connection icon” indicates that the
air puriier cannot connect to the Internet

%

29

˚C

89

%

P.12 P.13

301-500

This view shows that the
device is not able to detect the
air quality correctly. Please Re­set the device. If the problem
persists contact the KODAK
Smart Home Customer Support
team.

5. OPERATION INSTRUCTIONS

Setup

• Plug in the provided power adaptor to a power socket,
then plug in the DC plug into the DC jack located at
bottom of the air puriier to power up the device.

Power ON

• Press the power button once to turn ON the air
puriier.

x1

Power OFF

• Press the power button for 3 sec to turn OFF the air
puriier.

3 sec

P.14 P.15

Change fan speed and auto mode

Sleep mode

• Press the Screen button to switch the fan speed and
auto mode. The change sequence is Fan Speed 1

-> Fan Speed 2 -> Fan Speed 3 -> Auto Mode -> Fan
speed 1 -> ... (loop) See igure below

• Press the screen button for 2 seconds, to enter sleep
mode.

• In sleep mode, the LCD display will turn o. And the
fan speed will also change according to PM2.5 read­ing, just like auto mode, but the power of the fans is
relatively reduced to provide a quieter environment for
sleep.

2 sec

• In auto mode, the fan speed will change according to
PM2.5 reading. If the PM2.5 reading increases, the fan
speed will automatically and progressively increase.
The same will happen if in the meantime the PM2.5
reading decreases, then the fan speed will automat­ically and progressively decrease according to the
PM2.5 reading.

• Press the Screen button once to exit sleep mode
if the air purifier is in sleep mode.

x1

P.16 P.17

Cleaning

P.18 P.19

Pairing mode

• Press the Screen button and power button
simultaneously for 2 seconds to enter pairing mode.

2sec

KODAK

Smart Home App

• Pairing Flow

1. Select Air Puriier op­tion to start pairing

2. Tap Continue after
holding 2 buttons
and hearing a beep
sound

3. (For IOS only) Tap
the Go to Settings to
access to the Wi-Fi
settings

P.20 P.21

4. (For IOS only) In the

Wi-Fi settings, connect
to Puriier-VXXXXXXXXX
and return to the app

5. Wait while pairing in
progress

6. You may choose one
of the recommended
names or customise
it.

7. Tap Continue after
customizing your
name

8. Waiting while the
app is setting up the
names

9. Tap Done to conirm
the setup

P.22 P.23

6. MOBILE DISPLAY APP ICONS

Swipe Left or Right to view

other air puriier devices

Quick Start Guide

Move up or down to show
outdoor weather information

Auto Mode

Sleep Mode Timer

Graph

Air Quality Indicator

Power On/ O

Fan Speed

Sleep Mode

Schedule

P.24 P.25

7. OPERATION INSTRUCTIONS
( MOBILE APP)

• Sign up or Login KODAK Air Puriier app

To download the KODAK Smart Home app:

• On your mobile device, visit the App Store (iOS) or Google
Play (Android)

• Search for KODAK Smart Home app

• Download and install the KODAK Smart Home app on
your mobile device

scan to install

P.26 P.27

• Create or Login to Your Account

If this is your irst KODAK Smart Home product, you will be
asked to create an account. To set up an account:

• On your mobile device, open the KODAK Smart Home app

• Tap SIGN UP

• Follow the in-app instructions to create a new account

If you already have another KODAK Smart Home prod-
uct installed, simply select LOGIN:

P.28 P.29

• Pairing

1. Select Add New
Device

P.30 P.31

2. Select Air Puriier

option

3. Tap Continue after
following the steps 12
above

4. (For IOS only)

Go to settings

and connect to
WiFi Puriier-Vxxxxxxxx

5. (For IOS only)

Return to the app and
proceed to the next
step

6. Wait while pairing in

7. You may choose one

8. Tap Continue after cus-

9. Tap Done to conirm the

progress

P.32 P.33

of the recommended
names or customise it.

tomizing your name

setup

• Observe the Filter Usage

1. Tap to open the side
menu

P.34 P.35

2. Tap Filter Usage

3. When the status bar
of the Filter Usage is
100%, it means that the
device ilter needs to
be cleaned

• Power On/O

1. Tap to Power on

P.36 P. 37

2. Tap to Power o

• Change the Fan Speed

Indicates that the fan

1. Tap to activate to

2.
speed is low

fan speed

P.38 P.39

3. Indicates that the
fan speed is middle

4. Indicates that the
fan speed is high

• Set Auto Mode

• Set Sleep Mode

1. Tap to activate the
auto mode

P.40 P.41

2.
auto mode is on

Indicates that the

1. Tap to activate the
sleep mode

2.
sleep mode is on

indicates that the

• Set a Sleep Mode Timer

• Delete a Sleep Mode Timer

1. Tap to activate the
sleep timer

P.42 P.43

2. A timer will pop up,
select the time and tap

conirm

1. Tap to show the
sleep timer again

2. A timer will pop up, tap
Delete to delete the
timer previously set

• Cleaning

1. When this shows
the device filter needs
to be cleaned, just tap
on the screen, to view
the cleaning guide
steps

P.44 P.45

2. Follow the cleaning
guide steps to clean the
ilter

3. Cleaning Finished will
show when the user
has followed all steps
of cleaning guide

• Graph

1. Tap to read the

2. Tap

average PM2.5 data

average temperature
data

P.46 P.47

to read the

3. Tap to read the
average humidity data

4. Tap
the average humidity
and temperature data

and to read

• Schedule

Schedule

Start

End

Repeat

1. Toggle to activate
the schedule

2. Press Start or End to
setup the duration

3. Select the time period
and press Conirm to

4. Press Repeat to setup
the time schedule

activate the duration

P.48 P.49

5. Press Conirm to setup
the time schedule

P.50 P.51

8. GRANT ACCESS

8.1 Add Friend

You may grant access to your family and friends using the feature called Grant
Access which is located on the side menu of the Dashboard.

1. Click on “ ” which
is located on the
Dashboard

P.52 P.53

2. Select Grant
Access under

Devices

3. Click on + which is
located on the top
right

4. Simply follow the
instructions on the
app and click Save to
add a friend

• Check the front cover to see if it is properly in-

9. TROUBLESHOOTING

No Screen display, no light indicator

• Check the power plug to see if it is properly plugged
at your power socket.

• Check the DC connector to see if it is properly
plugged in the air puriier’s DC jack located under
the air puriier.

• Check the reusable ilter to see if it is properly in-

stalled. The front cover should be all the way up and
locked at the front of the air puriier, and the foam is
located underneath the front cover as shown.

stalled in the air puriier. The reusable ilter should
be at same level as the front panel if it is properly
installed as shown.

• Check the back cover to see if it is properly in­stalled. The back cover should be all the way up and
locked at the back of the air puriier, and the stopper
should be well screwed underneath the back cover
as shown.

P.54 P.55

10. SPECIFICATIONS

Power Adaptor Input: 100240v, 50/60Hz

11. EXCLUSION FROM COVERAGE

Output: DC 15V, 1.5A

CARD 180+cmf

Suggested Room

450550sq.ft

Area

Dimensions 8.9” (W) x 6”(D) x 15.5”(H);

226mm(W) x 152mm (D) x 394mm

(H)

Net Weight 9.36LBS ; 4.3kg

Frequency Band 24122472MHz for b, g, n20 (

24222462MHz for n40 (CE)

24122462MHz for b, g, n20 (

24222452MHz for n40 (FCC&IC)

CE)

FCC&IC)

• Normal Wear and Tear: Regular maintenance, repair
and replacement of parts and components due to
normal wear and tear are not covered.

• Abuse & Misuse: Defects or damage due to:
(a) improper operation, storage, misuse or abuse,
accident or neglect, such as physical damage
(such as cracks and scratches) to the surface of
the product resulting from misuse;
(b) contact with liquid, water, rain, extreme
humidity or heavy perspiration, sand, dirt or the
like, extreme heat, or food;
(c) use of the Products or Accessories for
commercial purposes or subjecting the Product

Operating

0 to 40 deg.C

Temperature

Maximum RF
Power

Storage

EIRP 15dBm (

CE)

Conduct Power 18dBm (FCC & IC)

-10 to 70 deg.C

Temperature

*The above speciication are only for reference. With

more advanced development and innovation, the
speciications will be changed.

or any Accessory to abnormal usage or
conditions; or
(d) other acts which are not the fault of eBuyNow or
its authorised distributor, are not covered.

P.56 P.57

12. FCC, IC AND CE REGULATIONS

• Use of Non-eBuyNow branded Products and
Accessories: Defects or damage due to the use

of non-eBuyNow branded or certiied Products or
Accessories or other peripheral equipment are not
covered.

• Unauthorised Service or Modiication: Defects
or damage due to service, testing, adjustment,
installation, maintenance, alteration, or modiication
in any way by someone other than eBuyNow, or its
authorised service centers, are not covered.

Trade Name:
Model:

FCC
IC
HVIN

FCC Part l5

NOTE: This equipment has been tested and found

KODAK

AP550 / Kodak Air Puriier Duo /
Kodak Smart Air Puriier AP550
DUAL FAN

2AT76AP550
22297AP550
AP550

• Altered Products: Products or Accessories with
(a) serial numbers or date tags that have been
removed, altered or obliterated;
(b) broken seals or that show evidence of
tampering;
(c) mismatched board serial numbers; or
(d) nonconforming or eBuyNow branded housings,
or parts, are not covered.

• Communication Services: Defects, damages, or the
failure of Products or Accessories resulting from any
communication service or signal you may subscribe

to comply with the limits for a Class B digital device,
pursuant to Part 15 of the Federal Communications
Commission (FCC) rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,

which can be determined by turning the equipment
to or use with the Products or Accessories are not
covered.

P.58 P.59

o and on, the user is encouraged to try to correct

the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the distance between the equipment and
receiver.

• Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV
technician for help.

Changes or modiications to this equipment not
expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.

• This device complies with Part 15 of the FCC rules.

13. WARNING

Changes or modiications, to this equipment not
expressively approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.

The socket-outlet shall be installed near the equipment
and shall be easily accessible.

Operation is subject to the following two conditions:
(1) this device may not cause harmful
interference,and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.

To ensure safety of users, the FCC has established
criteria for the amount of radio frequency energy
that can be safely absorbed by a user or bystander
according to the intended usage of the product. This
product has been tested and found to comply with the
FCC criteria.

Industry Canada

This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation,
Science and Economic Development Canada’s
licence-exempt RSS(s).
Operation is subject to the following two conditions:

1. This device may not cause interference.

2. This device must accept any interference, including
interference that may cause undesired operation of
the device.

This Class B digital apparatus complies with Canadian
ICES003. CAN ICES3(B)/NMB3(B)

P.60 P.61

14. EC DECLARATION OF CONFORMITY

We the manufacturer/ Importer: PerimeterSafe/eBuyNow

L’émetteur/récepteur exempt de licence contenu
dans le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement
économique Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux
deux conditions suivantes :

1. L’appareil ne doit pas produire de brouillage;

2. L’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.

declare under our sole responsibility that the following
product

Type of equipment: Air Puriier
Model: AP550 / Kodak Smart Air Puriier AP550 DUAL
FAN / Kodak Air Puriier Duo
Brand: KODAK

complies with the essential protection requirements
of RED Directive 2014/53/EU on the approximation
of the laws of the Member States relating to Radio
Spectrum Matters, the Council Directive 2004/108/EC
on the approximation of the laws of the Member States

RF Radiation Exposure Statement Caution:

This Transmitter must be installed to provide a
separation distance of at least 20cm from all persons.

IC Radiation Déclaration d’exposition Attention:

Cet émetteur doit être installé pour fournir une
distance de séparation d’au moins 20cm de toute
personne.

relating to electromagnetic compatibility (EMC) and the
European Community Directive 2006/95/EC relating to
Electrical Safety. Directive 2011/65/EC on the restriction
of use of hazardous substances (RoHS).

P.62 P.63

Assessment of compliance of the product with the
requirements relating to the essential requirements:

Radio Spectrum: EN300328 V2.1.1

EMC: EN3014891 V2.1.1

EN30148917 V3.1.1
EN550141:2017
EN550142:2015
EN6100032:2014
EN6100033:2013

Electrical Safety: EN603351:2012/A11:2012

EN503352165:2003/A13:2017

RF Safety: EN62311:2008

Ozone test: UL867, section 40
CSA C22.2 No.187

The product is labeled with the European Approval
Marking CE as shown. Any unauthorized modiication of
the product voids this Declaration.

The Kodak trademark, logo and trade dress are used under license from Kodak

P.64 P.65

AP550_User Manual_V1.8