Kodak MAX HQ - One Time Use Camera, MAX HQ - Open Me First Sleeve - Max HQ 35mm Single Use Camera, MAX HQ Flash User Manual

CIS-209
July 2000

CURRENT INFORMATION SUMMARY

Opening Instructions for the

KODAK MAX HQ Flash One-Time-Use Camera

Wear eye protection when opening all cameras.

Wind Off

Shutter Button

Thumbwheel

 Check the frame counter window.
 X’s must be visible.
 If not, grip camera, press Shutter Button, and

turn Thumbwheel until film is fully rewound.

Insert Tool

Open Film Door

 Use tool to bend cover back and remove film.

Remove Film

Opened camera with film removed.

 Insert special tool into end slot (as shown).

CAUTION: This camera body
contains a high voltage capacitor
and circuit board. To avoid electric
shock, do not pry apart the front and
back sections of camera. Remove
only film and battery from their
respective compartments. If sections
of the camera are separated, do not
touch the circuit board.

Exposed Film

 Place used camera in recycle bin.
 Return camera to Kodak for recycling.

5

CAUTION: To avoid injury, use tool carefully.

© Eastman Kodak Company, 2000

Current Information Summaries provide information of limited or specific

application. Responsibility for judging the timeliness and applicability of the

information to a specific photographic use rests with the end user.

CIS-209
Opening Instructions for the New 7-00

KODAK MAX HQ Flash One-Time-Use Camera Kodak and Max are trademarks. Printed in U.S.A.

Consumer Imaging

EASTMAN KODAK COMPANY • ROCHESTER, NY 14650